ASUSTeK Computer EK1542 EeeKEYBOARD PC User Manual 4

ASUSTeK Computer Inc EeeKEYBOARD PC Users Manual 4

Users Manual 4

3-12
Chapter 3: Getting connected
Adding Bluetooth devices
You may use peripherals such as a Bluetooth printer, or mouse with your
EeeKeyboard PC.
To add other Bluetooth-enabled devices:
1. Using an external mouse, right-click on the Bluetooth icon on
the Windows® taskbar, and select Add a Bluetooth Device. The
Bluetooth Setup Wizard appears.
2. Click Next to start searching for other Bluetooth devices.
3. From the list of available Bluetooth devices, select the device you
want to use with your EeeKeyboard PC, then click Next.
4. Select Don’t use a passkey and click Next to add the device.
5. Click Finish when done.
4-1
Appendices
Notices
REACH
Complying with the REACH (Registration, Evaluation, Authorisation,
and Restriction of Chemicals) regulatory framework, we published the
chemical substances in our products at ASUS REACH website at http://
green.asus.com/english/REACH.htm.
Federal Communications Commission
Statement
This device complies with FCC Rules Part 15. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
class B digital device, pursuant to Part 15 of the Federal Communications
Commission (FCC) rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
4-2
Appendices
The use of a shielded-type power cord is required in order to
meet FCC emission limits and to prevent interference to the
nearby radio and television reception. It is essential that only
the supplied power cord be used. Use only shielded cables
to connect I/O devices to this equipment. You are cautioned
that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to
operate the equipment.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
(Reprinted from the Code of Federal Regulations #47, part 15.193, 1993.
Washington DC: Office of the Federal Register, National Archives and
Records Administration, U.S. Government Printing Office.)
FCC Radio Frequency Interference Requirements
This device is restricted to INDOOR USE due to its operation in the
5.15 to 5.25GHz frequency range. FCC requires this product to be used
indoors for the frequency range 5.15 to 5.25GHz to reduce the potential
for harmful interference to co-channel of the Mobile Satellite Systems.
High power radars are allocated as primary user of the 5.25 to 5.35GHz
and 5.65 to 5.85GHz bands. These radar stations can cause interference
with and / or damage this device.
This device and its antenna(s) must not be co-located or
operating in conjunction with any other antenna or transmitter.
ASUS EeeKeyboard PC
4-3
FCC Radio Frequency (RF) Exposure Caution
Statement
Any changes or modifications not expressly approved by
the party responsible for compliance could void the user’
s authority to operate this equipment. “The manufacture
declares that this device is limited to Channels 1 through 11 in
the 2.4GHz frequency by specified firmware controlled in the
USA.”
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. To maintain compliance with FCC RF
exposure compliance requirements, please avoid direct contact to the
transmitting antenna during transmitting. End users must follow the
specific operating instructions for satisfying RF exposure compliance.
FCC RF Exposure Guidelines (Wireless Clients)
This device has been tested for compliance with FCC RF Exposure (SAR)
limits in typical portable configurations. In order to comply with SAR
limits established in the ANSI C95.1 standards, it is recommended when
using a wireless LAN adapter that the integrated antenna is positioned
more than [20cm] from your body or nearby persons during extended
periods of operation. If the antenna is positioned less than [20cm] from
the user, it is recommended that the user limit the exposure time.
Declaration of Conformity (R&TTE directive
1999/5/EC)
The following items were completed and are considered relevant and
sufficient:
Essential requirements as in [Article 3]
Protection requirements for health and safety as in [Article 3.1a]
Testing for electric safety according to [EN 60950]
RF exposure warning
This equipment must be installed and operated in accordance with
provided instructions and must not be co-located or operating in
conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure
compliance.
4-4
Appendices
Protection requirements for electromagnetic compatibility in
[Article 3.1b]
Testing for electromagnetic compatibility in [EN 301 489-1] & [EN
301]
Testing according to [489-17]
Effective use of the radio spectrum as in [Article 3.2]
Radio test suites according to [EN 300 328-2]
CE Mark Warning
This is a Class B product, in a domestic environment, this product may
cause radio interference, in which case the user may be required to take
adequate measures.
Wireless Operation Channel for Different
Domains
N. America 2.412-2.462 GHz Ch01 through CH11
Japan 2.412-2.484 GHz Ch01 through Ch14
Europe ETSI 2.412-2.472 GHz Ch01 through Ch13
France Restricted Wireless Frequency Bands
Some areas of France have a restricted frequency band. The worst case
maximum authorized power indoors are:
10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz)
100mW for frequencies between 2446.5 MHz and 2483.5 MHz
Channels 10 through 13 inclusive operate in the band 2446.6
MHz to 2483.5 MHz.
ASUS EeeKeyboard PC
4-5
There are few possibilities for outdoor use: On private property or on
the private property of public persons, use is subject to a preliminary
authorization procedure by the Ministry of Defense, with maximum
authorized power of 100mW in the 2446.5–2483.5 MHz band. Use
outdoors on public property is not permitted.
In the departments listed below, for the entire 2.4 GHz band:
Maximum authorized power indoors is 100mW
Maximum authorized power outdoors is 10mW
Departments in which the use of the 2400–2483.5 MHz band is
permitted with an EIRP of less than 100mW indoors and less than 10mW
outdoors:
01 Ain 02 Aisne 03 Allier 05 Hautes Alpes
08 Ardennes 09 Ariège 11 Aude 12 Aveyron
16 Charente 24 Dordogne 25 Doubs 26 Drème
32 Gers 36 Indre 37 Indre et Loire 41 Loir et Cher
45 Loiret 50 Manche 55 Meuse 58 Nièvre
59 Nord 60 Oise 61 Orne 63 Puy du Dôme
64 Pyrénées
Atlantique
66 Pyrénées
Orientales
67 Bas Rhin 68 Haut Rhin
70 Haute Saône 71 Saône et Loire 75 Paris 82 Tarn et
Garonne
84 Vaucluse 88 Vosges 89 Yonne 90 Territoire de
Belfort
94 Val de Marne
This requirement is likely to change over time, allowing you to use your
wireless LAN card in more areas within France. Please check with ART for
the latest information (www.art-telecom.fr)
Your WLAN Card transmits less than 100mW, but more than
10mW.
ASUS EeeKeyboard PC
4-7
ASUSTeK COMPUTER INC. (Asia Pacific)
Address 15 Li-Te Road, Peitou, Taipei, Taiwan 11259
Website www.asus.com.tw
Technical Support
Telephone +886228943447
Support Fax +886228907698
Software download support.asus.com*
ASUS COMPUTER INTERNATIONAL (America)
Address 800 Corporate Way, Fremont, CA 94539, USA
Telephone +15029550883
Fax +15029338713
Website usa.asus.com
Software download support.asus.com*
ASUS COMPUTER GmbH (Germany and Austria)
Address Harkort Str. 21-23, D-40880 Ratingen,
Germany
Fax +492102959911
Online contact www.asus.com.de/sales
Technical Support
Component Telephone +491805010923
System/Notebook/Eee/
LCD Telephone +491805010920
Fax +492102959911
Online support www.support.asus.com
* Available on this site is an online Technical Inquiry Form that you can
fill out to contact technical support.
ASUS Contact information

Navigation menu