ASUSTeK Computer EW2000TX ASUS WICAST User Manual

ASUSTeK Computer Inc ASUS WICAST Users Manual

Users Manual

User Manual Model No.:EW2000 Model name: WHDI transmitter module Version: v0.1 Date: July-12, 2010
2 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device is restricted to indoor use when operated in the 5.15 to 5.25 GHz frequency range. FCC / IC Radiation Exposure Statement: This equipment complies with FCC/ IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This module is intended for OEM integrator only and limited to host with ASUS WiCast model: EW2000; EW2000TX. The OEM integrator is still responsible for the FCC compliance requirement of the end product, which integrates this module.20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an population/uncontrolled environment can be satisfied.  Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. The FCC part 15.19 statement below has to also be available in the manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication. This device has been designed to operate with an antenna having a maximum gain of [2.11] dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication. 
3 This Class [B] digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada. Contents 1. Revision History ................................................................................................... 3 2. Related Documents .............................................................................................. 3 3. Overview ............................................................................................................... 4 3.1. Scope .......................................................................................................... 4 3.2. Features ...................................................................................................... 4 3.3. Specification .............................................................................................. 5 3.4. Mechanical Characteristics ........................................................................ 6 3.5. Module function Block Diagram ............................................................... 7 3.6. RoHS Compliant ........................................................................................ 7 3.7. EMI EMC certifications............................................................................. 7 4. Engineering sheets ............................................................................................... 8
4 3. Overview 3.1. Scope The EW2000 wireless transmitter module, together with the EW2000 wireless receiver module, presents the ultimate solution for converting any High Definition (HD) system into a wireless one. This add-on module enables wireless A/V applications that easily fit into the living room and eliminate traditional A/V wiring. The ultimate HD video and audio quality and robustness are unmatched by any other wireless technology, and present a true alternative to cable. 3.2. Features  Transmission technology z MIMO  Cable Free z To eliminate the wires clutter from the living room  Video resolutions z Up to 1080p  Frequencies supported z Unlicensed 5GHz band  Range z At least 5m in room z Line-of-sight will depend on the environment  Application Bandwidth z The Control Channel allows two-way communication of 100Kbps  Latency z Less than 1ms delay between video/audio source and sink.
5 3.3. Specification Interface Digital Video:30-bit RGB or YCrCb Digital audio: I2S and SPDIF Two-Wire serial bus slave interface One interrupt line Network Standard 5GHz unlicensed band Modulation OFDM Technique Proprietary Operating Frequency 5.18GHz to 5.875GHzOperating Channels USA/Canada: 36/40/44/48/149/153/157/161/165 Japan: 36/40/44/48 EU/AUS/NZ: 36/40/44/48RF Output Power TBD Antenna With 2 external antennas Supply Voltage 5V±10% Power Consumption 3.5W max
6 3.4. Mechanical Characteristics
7 3.5. Module function Block Diagram 3.6. RoHS Compliant HM510 is fully compliant to RoHS requirement. 3.7. EMI EMC certifications HM510 is fully compliant with FCC regulatory requirements.
8 4. Engineering sheets Pins Out and Pin Descriptions : 1 GND 40 GND 2 5V 41 5V 3 5V 42 5V 4 GND 43 GND 5 WHDI_DCLK 44 WHDI_H_SYNC 6 GND 45 WHDI_V_SYNC 7 WHDI_DE 46 GND 8 WHDI_D34 47 WHDI_D35 9 WHDI_D32 48 WHDI_D33 10 WHDI_D30 49 WHDI_D31 11 WHDI_D28 50 WHDI_D29 12 WHDI_D26 51 WHDI_D27 13 GND 52 GND 14 WHDI_D22 53 WHDI_D23 15 WHDI_D20 54 WHDI_D21 16 WHDI_D18 55 WHDI_D19 17 WHDI_D16 56 WHDI_D17 18 WHDI_APP_DEBUG1_D14 57 WHDI_APP_DEBUG2_D15 19 GND 58 GND 20 WHDI_D10 59 WHDI_D11 21 WHDI_D8 60 WHDI_D9 22 WHDI_D6 61 WHDI_D7 23 WHDI_D4 62 WHDI_D5 24 WHDI_D2 63 WHDI_D3 25 GND 64 GND 26 WHDI_MCLK 65 WHDI_I2S_D3 27 WHDI_SCLK 66 WHDI_I2S_D2 28 WHDI_LRCLK 67 WHDI_I2S_D1 29 WHDI_SPDIF 68 WHDI_I2S_D0 30 GND 69 WHDI_HPD 31 WHDI_USB_D- 70 WHDI_I2CS_SCL 32 WHDI_USB_D+ 71 WHDI_I2CS_SDA 33 GND 72 WHDI_TXD_APP 34 WHDI_M_SCL 73 WHDI_RXD_APP
9 WHDI_M_SDA 74 WHDI_RESET_IN 36 WHDI_INT_OUT_PE 75 WHDI_HDMI_RESET_OUT 37 WHDI_HDMI_INT_IN 76 WHDI_GPIO0 38 WHDI_PWM0 77 WHDI_GPIO1 39 WHDI_PWM1 78 WHDI_GPIO2 35

Navigation menu