ASUSTeK Computer GALAXY3 PDA Phone User Manual zx1 users manual 2

ASUSTeK Computer Inc PDA Phone zx1 users manual 2

zx1 users manual 2

Download: ASUSTeK Computer GALAXY3 PDA Phone User Manual zx1 users manual 2
Mirror Download [FCC.gov]ASUSTeK Computer GALAXY3 PDA Phone User Manual zx1 users manual 2
Document ID936744
Application IDXCglS1F17vv6CN0Q2fVs5w==
Document Descriptionzx1 users manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize114.42kB (1430208 bits)
Date Submitted2008-05-05 00:00:00
Date Available2008-07-03 00:00:00
Creation Date2008-05-05 14:04:53
Producing SoftwareAdobe PDF Library 7.0
Document Lastmod2008-05-05 14:05:14
Document Titlezx1 users manual 2
Document CreatorAdobe InDesign CS2 (4.0)

Configuring wireless networks
To configure a wireless network:
1. To launch the Wi-Fi settings page, you can either:
•
•
Tap
Tap
> Settings > Connections tab > Wi-Fi.
from the status bar and then tap Settings > Wi-Fi.
2. On the Configure Wireless Networks screen, tap an available wireless network, then make the
necessary changes.
If the wireless network you want to connect to is not on the list, tap Add New....
Refer to the succeeding sections for details on how to add new wireless networks.
Tap the Network Adapters tab and select an adapter. Tap an adapter to set if necessary.
3. Tap
when done.
111
Adding a wireless network
If the device fails to automatically detect the wireless network you want to connect to, you can manually
add a network. Ask for the wireless network settings from your network administrator.
To add a wireless network:
1. To launch the Wi-Fi settings page, you can either:
•
•
Tap
Tap
> Settings > Connections tab > Wi-Fi.
from the status bar, then tap Settings > Wi-Fi.
Then tap Add New... from the Wireless tab.
2. Enter a name for the network and select an item from the Connects to: drop-down menu. Then tap
Next.
3. Set authentication, data encryption, and network key. Ask your network administrator for these
information. Then tap Next.
NOTE:		 Obtain the authentication, data encryption, and network key from your network administrator.
4. If you need to change the EAP type, check the check box and then change the EAP type.
5. Tap Finish when done.
112
Using Wi-Fi Manager
The Wi-Fi Manager shows connection status and information on a wireless network, and allows you to
manually scan your area for available wireless networks.
To open the Wi-Fi Manager:
• Tap
> Settings > Connections tab > Wi-Fi Manager.
There are four tabs in the Wi-Fi Manager:
Info
This page shows the current connection status and link information.
Setting
This page allows you to define settings for establishing a device-to-device wireless connection as well
as power saving settings. We recommend to set the Power Save to Enable.
IP Info
This page shows the network information and provides a way to get the new IP address from the
DHCP server.
The Renew button enables you to request the DHCP server for a new IP address. This function would
take several seconds to get the new IP address.
The Ping button serves as the network’s diagnostic tool. It enables you to detect if your device is
connected to the network.
Site Survey
This page shows the available wireless network. Tap Re-Scan to search for available wireless
networks.
Each wireless network is preceded by an icon for easy identification. The network channel, RSSI, and
SSID are also displayed in columns.
113
Setting a GPRS connection
Your device allows you to connect via General Packet Radio Service (GPRS). GPRS is a wireless
communication standard that runs at speeds of up to 144 kbps, compared to 9.6 kbps of the current
Global System for Mobile Communication (GSM). It supports a wide range of bandwidth that allows
sending and receiving small bursts of data, such as e-mail and web browsing. To set a GPRS connection
in your device:
1. From the Today screen, tap
on the status bar, then tap Settings > Connections. Or from the
Settings screen, tap Connections tab > Connections.
2. From the Connections screen, tap Add a new modem connection.
3. Enter a unique name for the connection then select Cellular Line (GPRS) from the modem list.
4. Enter the Access point name. Consult your network service provider for the access point.
5. Enter your user name, password, and domain then tap Finish. Contact your network administrator for
assistance.
NOTES:
•
The network connection may vary with different locations and mobile service providers. Consult your mobile
service provider for the applicable network connection in your area.
114
•
The charge of GPRS services and the GPRS connection settings might vary with different operators.
Consult your service provider for suitable solution.
•
The GPRS and USB connections cannot be used at the same time.
Connecting GPRS
To connect GPRS:
1. Tap
> Settings > Connections tab > Connections.
2. From the Connections screen, tap Manage existing connections.
3. Tap and hold on an existing connection then from the pop-up menu tap Connect.
Tap Delete if you want to delete the selected connection.
4. When connected, tap
to exit.
NOTE: When WLAN is used simultaneously with the GPRS, the GPRS will get signal priority. We recommend not
to use WLAN and GPRS at the same time.
If you have set a default GPRS connection, it automatically connects when you launch an application that
connects to the Internet.
1. Launch any application that connects to the Internet such as Internet Explorer. The device will
automatically connect to your default GPRS connection. A pop-up callout appears to display the
connection status.
2. When connected, you can start browsing the Internet. If you are using Internet Explorer, the default
site will be displayed.
115
Disconnecting GPRS
To disconnect GPRS:
•
From Wireless Manager screen, tap
NOTES:
• If your ActiveSync is set to sync with Exchange Server automatically, synchronization will occur after you
		 connect again.
• GPRS will automatically reconnect everytime you launch an application that requires GPRS connection
		 (such as Internet Explorer or Windows Live Messenger).
Using the GPRS Tool
The GPRS Tool allows you to conveniently select and connect to your GPRS service provider.
To connect via GPRS Tool:
1. Tap
> Settings > Connections tab > Network Setting.
You can also tap
on the status bar then tap Settings from the popup callout.
2. From the Network Setting screen, select your GPRS provider from the list.
NOTES:
• Operators vary in different regions.
• The GPRS and USB connections cannot be used at the same time.
116
Setting the network
Your device enables you to configure your device’s network connection as well as set multiple networks in
the order that you want to access them.
Configuring the network
To configure the network settings:
1. Tap
> Settings > Connections tab > Network Setting.
2. Select the Country and Operator from the dropdown lists. If your mobile service operator is not on
the list, tap the Auto Detect button.
3. When done, tap
Setting your preferred networks
Your device enables you to set multiple networks in the order that you want your device to access them.
If your primary network is not accessible, your device will automatically try to access an available network
in your network list.
To set preferred network:
1. From the phone pad, tap Menu > Options > Network tab.
2. Tap Set Networks and follow the onscreen instructions.
3. When you have set your preferred networks, tap
selection list, tap Automatic.
to return to the Network tab. In the Network
117
GSM/3G Networks
GSM/3G Networks allows you to conveniently switch network type. Network options include Automatic,
3G, and GSM. The default setting is Automatic, which allows the device to search for the proper service
automatically.
To choose network type
1. Tap
> Settings > Connections tab > GSM/3G Networks.
2. Select a proper network type, then tap
If you prefer to use the service your SIM card automatically detected, select Automatic.
3. When prompted, tap
to restart your device and apply changes.
NOTES:
• Network type varies with different service providers.
• Ensure that you choose the right network type for your SIM card.
118
Chapter 9
GPS features
• GPS Catcher
• External GPS
119
GPS Catcher
The GPS Catcher allows you to update the Global Positioning System (GPS) data in your device. The
GPS data contains important information about the status of satellite, and the current date and time for
determining the satellite position.
Updating GPS data
To update GPS data:
1. Tap
> Programs > GPS Catcher.
3. Tap
when finished.
2. Then tap Update to start update.
NOTES:
• To make a successful update, ensure that your device is connected to the Internet.
• The expiration of GPS data is three days. You need to update it again when it is expired.
• You can also set GPS Catcher to update automatically, refer to the Setting GPS Catcher section for details.
Setting GPS Catcher
To set GPS Catcher:
1. From the GPS Catcher screen, tap Menu > Setting.
2. Set the options according to your preference. Tap Done when finished.
120
External GPS
Your device allows you to use an external GPS device to receive GPS data.
NOTES:
• Your Pocket PC support only Bluetooth-enabled external GPS devices.
• Before using an external device, connect your external GPS device to your Pocket PC via Bluetooth. Refer
		 to Using Bluetooth® section for details.
To set an external GPS device:
1. Tap
> Settings > System tab > External GPS.
2. From the Programs tab, select a program port.
NOTE:		 By default, the port is set to GPD1. We recommend that you DO NOT change the default setting.
3. From the Hardware tab, specify a hardware port and baud rate for your external GPS device to use.
NOTE: By default, the hardware port is set to COM2, and the baud rate is set to 57600. Refer to the user guide of
your external GPS device for details.
4. From the Access tab, select the Manage GPS automatically (recommended) box.
IMPORTANT:
GPS data.
If you clear this check box, some GPS related application in your device may not be able to obtain
121
122
Chapter 10
Multimedia features
• Using the camera
• Viewing pictures and videos
• Using Streaming Player
• EziMusic
• EziPhoto
• YouTube&Flickr
123
Using the camera
The built-in 3.0 megapixel camera allows you to take photos and record audio/video clips.
Launching the camera
To start using the camera, do either of the following:
•
•
Tap
> Programs > Pictures & Videos > Camera icon.
Press the Camera button on the right side of your device.
To exit the Camera, tap the exit
icon on the camera screen.
Available capture modes
Your device camera can be set to two capture modes:
•
•
Camera mode - Camera mode allows you to take photos, and save them to your device or microSD.
You can also configure the camera to match an environment, set picture size, select magnification,
adjust the picture quality, apply effects, and modify other advanced settings.
Video mode - Video mode enables you to record audio/video clips. Like in camera mode, it also
allows you to select the magnification, set the video size, apply some effects, select target storage,
and modify advanced video settings.
Supported formats
Using the camera mode or video mode, the images or video clip captured are stored in the following
formats:
•
•
124
Still image (Camera mode): - JPEG (.jpg)
Video (Video mode): - 3GP (.3gp), MPEG-4 (.mp4)
Camera mode
The following describes the screen icons in Camera mode:
Capture mode icon
GPS mode icon
Picture quality icon
Default storage icon
Scene mode icon
Timer icon
Burst mode icon
Effects icon
Picture size
Tap to close camera
Number of
available shots
Tap to preview
Pictures and Videos
Capture modes:
Camera mode.
Tap to switch to video
mode
Tap to zoom out
Tap to zoom in
Tap to launch menu
NOTES:
• By default, the preview screen is set to landscape.
• After launching the camera, your device is set to camera mode by default.
• In camera mode, the camera button function as shutter button.
125
Camera options menu
The camera options menu allows you to change various camera and picture settings.
To launch options menu:
1. Tap Menu from the camera screen.
2. From the shortcut menu, tap an icon to display contents.
•
•
•
•
•
•
•
•
•
Change Mode: Allows you to set capture mode into Camera or Video mode.
GPS Mode: Allows you to turn on or turn off GPS in Camera mode.
Scene: Allows you to select presets appropriate for a night scene or sports event. Select Auto to
use best setting for any scene.
Picture Size: Allows you to set the frame size of the picture.
Picture Quality: Allows you to select picture quality: Normal, Fine, and Super Fine. By default,
the picture quality is set to Fine.
Zoom: Allows you to change the maximum magnification allowed.
Self-Timer: Sets the delay of shutter release to 5 or 10 seconds after you have 			
pressed the camera/shutter button.
Burst: Allows you to take 4 or 9 pictures in succession with one press of the camera/		
shutter button.
Frame: Allows you to set a frame.
NOTE:		 Ensure that you have set the screen resolution to 320 x 240 before setting the frame.
•
126
Effect: The Effect option allows you to apply some effects to the subject. Select from 		
the following configuration options: Black-White, Negative, and Sepia. Set to Normal 		
for no effect.
•
Save to: Allows you to select the default storage for captured pictures.
NOTE:		 Prepare a MicroSD card before setting default storage to Storage Card.
•
Advanced: This option allows you to set the following:
			 - Filename prefix format
			 - Filename prefix
			 - File number
			 - Date and time stamp
			 - Shutter sound
			 - Burst interval
			 - Color adjustment
			 - General setting
			 - MMS mode
127
Taking photos
After launching the camera, your device is set to Camera mode by default. If set to Video mode, tap Menu
> Change Mode > Camera Mode then tap Exit.
You can also switch between camera mode and video mode by tapping the camera/video mode icon on
the screen.
To take photos:
1. Aim device to your subject then half-press the camera button to auto-focus on the subject.
While the camera button is half-pressed, the auto-focus frame appears on the center of the screen.
2. Full-press the camera button. When the
shaking.
icon appears, ensure that the device is stable and not
3. Tap Camera and then repeat steps 1 to 2 to take more photos.
NOTE: The image is automatically saved to the default storage location and can be viewed using the Pictures &
Videos application.
128
Video mode
The following describes the screen icons in Video mode:
Capture mode icon
Remaining video
recording time
Default storage icon
Effects icon
Video size
Tap to close camera
Tap to launch Pictures
& Videos
Recording indicator
Green: Ready
Red: Recording
Capture mode icons:
Video mode
Tap to switch to camera
mode
Tap to zoom in
Tap to zoom out
Tap to launch
video menu
129
Video options menu
The video options menu allows you to change various video and playback settings.
To launch video options menu:
1. Tap Menu from the video screen.
2. From the shortcut menu, tap an icon to display contents.
•
Change Mode: Allows you to set capture mode into Camera or Video mode.
•
Video Size: Allows you to set the frame size of video.
•
•
Zoom: Allows you to change the maximum magnification allowed.
Save to: Allows you to select the default storage location for recorded videos.
NOTE:		 Prepare a MicroSD card before setting default storage to Storage Card.
•
•
Effect: The Effect option allows you to apply some effects to the subject. Select from 		
the following configuration options: Black-White, Negative, and Sepia. Set to Normal 		
for no effect.
Advanced: This option allows you to set the following:
			 - File extension
			 - Filename prefix format
			 - Filename prefix
			 - File number
			 - Enable or disable audio when recording
			 - Color adjustment
			 - General setting
			 - MMS mode
130
Recording videos
Set the device to video capture mode to record videos.
To set video mode:
•
•
Tap Menu > Change Mode > Video Mode then tap Exit.
Tap the video mode icon on the screen.
To record video:
1. Aim device to your subject then half-press the camera button to auto-focus on the subject.
While the camera button is half-pressed, the auto-focus frame appears on the center of the screen.
2. Full-press the camera button to begin recording. The record indicator turns from green to red while
video is recording.
3. Press the camera button again to stop recording.
NOTES:
• The video clip is automatically saved to the default storage location.
• Use Windows Media Player Mobile to playback video clip in your device.
• Use Apple® QuickTime™ player, if you wish to play video clips in your computer. You can download 		
		 QuickTime™ installer from www.apple.com/quicktime.
131
Viewing pictures and videos
Use the Pictures & Videos Application to preview stored images and playback video clips.
Viewing pictures and videos
To view pictures and videos:
1. Tap
> Programs > Pictures & Videos.
2. Tap the picture or video clip you want to see.
•
•
•
To view pictures or launch video clips stored in MicroSD card, tap the folder list 			
(labeled My Pictures), and tap Storage Card.
To view pictures stored in My Pictures folder on your device, tap My Pictures then tap 		
a picture thumbnail.
To playback video clips in My Pictures folder on your device, tap My Pictures then 		
tap a video.
Editing pictures and photos
To edit pictures and photos:
1. Tap
> Programs > Pictures & Videos. Tap a picture or a photo thumbnail to open.
2. Tap Menu > Image Editor.
3. Edit the image.
Draw, add stamp, and type on the picture using the tools.
You can also erase and undo editing with the eraser tool and the undo tool.
Refer to the tool icons and their descriptions on the next page.
132
Tool bar
Icons
Description
Tap to hide the tool bar
Icons
Description
Tap to erase some parts in
the picture
Tap to select the color of your
editing stroke
Tap to undo editing
Tap to select the size of the
pencil stroke
Tap to save the image
Tap to add some stamps in the
picture
Tap to exit editing
Tap to add text
NOTES:
• This image editor function can only be applied to the pictures or photos with 320 x 240 resolution.
• The image bigger than 320 x 240 resolution will be zoomed into 320 x 240 resolution.
4. Tap
to save the picture. Then tap Yes to confirm.
NOTE:		 In this option, the original picture is replaced by the edited file.
You can also tap
name.
in the Tool bar and choose Save as to save the edited picture as another file
133
Streaming Player
Streaming Player allows you to play audio or video files streamed to your device from the Internet.
Supported formats include 3gp, 3g2, mp4, and sdp.
NOTE: Before using Streaming Player, ensure that you are connected to the Internet via Wi-Fi, or GPRS
connection. Refer to the sections on Wi-Fi, or GPRS in this user guide for activating any of these connections on
your device.
Tap to play/stop a file
Tap to play the previous file
Tap to maximize the screen
Tap to browse the internet
Tap to open and connect to
an rtsp:// URL website
Tap to play the next file
Tap to put sound on mute mode
Tap to increase the volume
Tap to decrease the volume
Tap to launch the Menu list
NOTE: A Real Time Streaming Protocol (RTSP) website provides multimedia data streams such as audio or
video clips.
134
Playing a streaming file
To play a streaming file:
1. Tap
> Programs > Streaming Player, then tap Open.
2. Select Connect with tracking history or manual input of URL.
3. Key in the web address then tap Connect.
NOTE:
4. Tap
NOTE:
Streaming Player only recognizes an rstp:// URL web address.
to play a streaming file from your preferred rtsp website.
You may bookmark your favorite rtsp://URL website. Refer to the next section for more details.
Connecting with bookmarks
Your device enables you to store and play streaming files from your favorite rtsp websites.
NOTE:
Before you can connect to a favorite rtsp website, you must first add the website to your Bookmark list.
To create a bookmark:
1. On the Streaming Player screen, tap Menu > Bookmark Manager.
2. Tap New Folder, then enter the name for the folder.
3. Tap Save to save the folder name. You can add an rtsp://URL website to the folder you have created
the next time you connect to the Internet.
135
To bookmark an rtsp://URL web address:
1. Tap
> Programs > Streaming Player, then tap Open.
2. Select Connect with tracking history or manual input of URL.
3. Key in the rtsp://URL web address then tap Connect.
4. Tap
to play a streaming file from your preferred rtsp website.
While a streaming file is playing, tap Menu > Add to My Bookmark.
5. Assign a specific name for the streaming file that you want to save.
6. Select the folder in your Bookmark list where you want to save the file.
To play a bookmarked streaming file:
1. Tap
> Programs > Streaming Player, then tap Open.
2. Select Connect with Bookmark.
3. Select a file from your Bookmark folders, then tap Connect.
4. Tap
136
to play a streaming file from your favorite rtsp website.
EziMusic
EziMusic enables you to enjoy music and manage music files easily.
To launch EziMusic, do either of the following:
•
•
Tap
> Programs > EziMusic.
Press the AnyTime Launcher key, then tap
> EziMusic.
The following describes the EziMusic profile on your device.
Tap to enter the Library
Tap to select the file
Tap to play the selected file
Tap to play the previous file
Tap to play the next file
Tap to change shuffle/repeat modes
Tap to adjust the volume
Displays the total playing time
Displays the time elapsed
Drag the slider to change the
playing process
Tap to open the menu list
Tap to enter the Library
137
EziPhoto
EziPhoto enables you to view and manage your photos conveniently.
To launch EziPhoto, do either of the following:
•
•
Tap
> Programs > EziPhoto.
Press the AnyTime Launcher key, then tap
> EziPhoto.
The following describes the EziPhoto profile on your device.
Tap to open Albums
Tap to open the Calendar
Tap to view all photos
Tap a photo to view in
full- screen mode
Tap to switch among Album,
Calendar, and All Photos view
138
Tap to open the menu list
YouTube&Flickr
YouTube&Flickr enables you to upload videos to the YouTube website and pictures to the Flickr website
via MMS, and e-mail messages.
IMPORTANT:
• Ensure that you have registered the MMS service with your mobile service provider before uploading videos
		 or pictures via MMS.
• Set up an e-mail account on your device before uploading videos or pictures via e-mail messages. Refer to
		 the Setting up accounts section in Chapter 5: Messaging for details.
Using YouTube
You are allowed to upload videos directly to the YouTube website from your device via MMS, and e-mail
messages.
IMPORTANT: Before using YouTube, register for a YouTube account and set up your Mobile Profile at the
YouTube website at http://www.youtube.com. YouTube provides you with a special e-mail address ending
with @mms.youtube.com.
To upload video clips to YouTube:
1. Tap
> Programs > YouTube&Flickr > YouTube.
2. Tap Menu > Space Setting
3. In the Email for YouTube uploading area key in your e-mail address, then tap Done.
4. Select MMS or an e-mail account from the dropdown list.
5. Tap Add, then tap a video clip from the list.
139
NOTE:		 Consult your mobile service provider for the size limit of an MMS message. You are allowed to upload
several video clips at a time within the limit.
5. Key in a title, and description for your video clip.
6. Tap Send to upload the video clip to YouTube website.
Using Flickr
You are allowed to upload photos directly to the Flickr website from your device via MMS, and e-mail
messages.
IMPORTANT:
Before using Flickr, register a Flickr account at the Flickr website at http://www.flickr.com.
To upload photos to Flickr:
1. Tap
> Programs > YouTube&Flickr > Flickr.
2. Tap Menu > Space Setting
3. In the Email for Flickr uploading area key in  @photos.flickr.com, then tap
Done.
4. Select MMS or an e-mail account from the dropdown list.
5. Tap Add, then tap a photo from the list.
NOTE: Consult your mobile service provider for the size limit of an MMS message. You are allowed to upload
several photos at a time within the limit.
6. Key in a title, description, and tag for your picture.
7. Tap Send to upload the picture to the Flickr website.
140
Chapter 11
Business features
• Ur Time
• Remote Calendar
• Meeting Time Planner
• WorldCard Mobile
• Remote Presenter
141
Ur Time
Ur Time allows you to set the time and alarm at your current location as well as set the time for up to four
cities.
Setting time
To set time:
1. Tap
> Programs > Ur Time.
3. Tap
when finished.
2. Tap Menu > Time. Set the local time at your current location.
Setting alarm
To set the alarm:
1. Tap
> Programs > Ur Time.
2. Tap Menu > Alarm, then tap New to add a new alarm, or select an
existing alarm and tap Edit.
3. Set alarm details.
To activate anti-snooze feature, check the Snooze box and set snooze interval.
4. Tap
when finished.
Setting the World Cock
To set World Clock:
1. Tap
> Programs > Ur Time.
2. Tap Menu > World Clock. You can set the time for up to four cities.
3. Tap
142
. The World Clock appears on the Today screen.
Remote Calendar
Remote Calendar allows you to access your Google Calendar from your device. From your device, you
can either view the calendar or synchronize events and agenda with your Google Calendar in
bi-directional way. Download events from Google calendar, or upload events to Google Calendar with
your device.
IMPORTANT:
• Obtain a Google account before you use this function. Visit www.google.com/calendar for details on account
		 register.
• Ensure that your device is connected to Internet via GPRS when using the Remote Calendar.
Synchronizing your calendar
Downloading events from Google Calendar
To download agenda or events form your Google Calendar:
1. Tap
> Programs > Remote Calendar
2. Key in the Username and Password, then tap Sync to start
synchronizing.
3. When the calendar is synchronized successfully, a pop-up message
appears. Tap Yes to open the calendar or tap No to exit.
143
Uploading events to Google Calendar
To upload new events or modified events to your Google Calendar:
1. Tap
> Calendar.
2. Select the event you want to upload to Google Calendar, then tap Menu > Upload to Google.
Setting Remote Calendar
The Remote Calendar allows you to set synchronization mode.
To set your Remote Calendar:
1. Tap
> Programs > Remote Calendar > Option > Setting.
2. Set your desired synchronization mode, then tap OK to apply changes or tap Cancel to quit.
Tap to select sync mode.
Tap to select sync interval.
This item is inactive when the sync mode is set to Manual.
Tap to select sync direction.
Tap to select priority when event conflict happens.
144
Meeting Time Planner
Meeting Time Planner allows you to find a suitable time to have a video conference, telephone or net
meeting with participants in different time zones.
To use the Meeting Time Planner:
1. Tap
> Programs > Meeting Time Planner.
2. Select the date and the cities.
A color-coded 24-hour timetable of the chosen cities appear,
allowing you to identify the best time for the meeting. Dark blue is
late night/early morning, light blue is off-peak hour, and white is
peak daytime hour. You can also change the time interval shown
by tapping Interval on the lower-right corner of the screen.
3. Select the time for your meeting and tap New Date.
4. Fill in the meeting information and tap
Calendar.
to add your date into the
NOTE:		 You can tap Interval > Summer Time to use daylight saving
time.
145
WorldCard Mobile
WorldCard Mobile is capable of automatically recognizing business cards and sorting recognized field
information by name, title, company, phone number, fax number, address, or other properties. You can
also edit business card information for effective sorting and management.
To use WorldCard Mobile
> Programs > WorldCard Mobile.
1. Tap
2. Tap
and then press the Camera button
to capture the image of a business card. Tap
WorldCard Mobile.
3. Select a language and then tap Recognize to run
automatic recognition.
4. Edit the business card information if necessary.
5. To save the card information, do any of the
following:
•
•
Tap
, then tap Yes to confirm.
Tap Export to export the selected
information to the Contacts.
Capture Button
Exit
About
Help
Setting
146
Remote Presenter
From your device, Remote Presenter allows you to remotely control PowerPoint™ presentations running
on your desktop or notebook. Operating over a Bluetooth wireless connection, it promotes convenience
and freedom of movement during your presentation. It also enables you to review slide notes without
affecting the audience’s view of the slide show.
IMPORTANT:
• Before you start, make sure to install the Remote Presenter utility on your computer. You can find the
		 installation files in the bundled support CD.
• Remote Presenter works with Bluetooth-enabled computers only.
• The screen captures in the following setup are for reference only and the sequence may appear differently,
		 depending on the previous Bluetooth configuration performed on your system.
To use the Remote Presenter:
1. Tap
> Programs > Remote Presenter.
IMPORTANT:
Ensure that the Blootooth on you computer is enabled and set to be visible.
2. Tap Next on your device. You device starts searching for other Bluetooth-enabled devices.
From the list of Bluetooth devices found, select the name of computer containing your PowerPoint
presentation then tap Next.
4. Check your computer screen when your device prompts a message reminding you to check you
computer.
5. Click the prompted message on your computer screen to allow your device to access the ActiveSync
service of your computer.
147
6. From your computer, key in the passcode then click OK. The passcode is used to secure your
connection.
NOTE:
The Bluetooth passcode is only required if a paired relationship is not yet established between devices.
7. Tap Yes from you device and key in the same passcode to allow your computer to connect to your
device.
8. Tap Done from the prompted message reminding you of a successful connection.
9. Tap
from the prompted message reminding you to launch the Remote Presenter on your
computer.
10. Launch the Remote Presenter program on your computer.
	To do this, from your computer desktop, click Start > All Programs > ASUS > Remote Presenter.
The following describes the Remote Presenter menu on your computer screen.
PowerPoint .ppt file path
Bluetooth COM port.
* The port varies with
different computers.
148
Click to change path
Click to start or stop
Click to exit
10. From the Remote Presenter menu on your computer, click
to establish a connection.
When prompted with the Bluetooth Service Authorization message, click OK.
12. From your device, tap Connect. Then tap
from the reminder message.
13. A list of PowerPoint (.ppt) files appears on your device when a successful connection is established.
Repeat from step 1 if the connection failed.
14. Tap the name of the PowerPoint (.ppt) file to show then tap Select.
Upon selection, Microsoft® PowerPoint is automatically launched on your computer with the selected
file open.
15. You can now remotely control the PowerPoint presentation on your computer using your device.
The following describes the control panel on your device.
Slide number
Tap to exit
Tap to select slide
Indicates Bluetooth® signal
Timer
Tap to switch between Normal and
Slide Show view
Previous slide
Tap to switch between Note and
Control Panel view
Next slide
Tap to display menu options
149
150
Chapter 12
ASUS Special features
• Gesture feature
• ASUS status icon
• ASUS Zip
• Backup
• Newstation
151
Gesture feature
This feature detects your finger movements on the screen to trigger special effects such as scrolling,
panning, zooming, and rotating.
Enabling the Gesture feature
To enable the Gesture feature
1. Tap
> Settings > System tab > Gesture.
2. Select the check box of Enable Gesture Function.
3. Select the Enable Sound Effects if you want to play the sound when your finger gesture is detected.
NOTE:		 The sounds are for some of the gestures only.
4. Tap
when finished.
Using the Gesture
Action
Scroll
Gesture
Description
Scroll up/down: Slide your finger upward/downward on the screen.
NOTE: To stop scrolling, touch the screen with your finger.
View previous page/next page in Internet Explorer and EziPhoto:
Slide your finger leftward/rightward on the screen.
152
Action
Pan
Gesture
Description
Pan up/down: Slide your finger upward/downward on the screen
and then stop at your destination.
Pan left/right: Slide your finger leftward/rightward on the screen and
then stop at your destination.
Pan top-left/bottom-right: Slide your finger in a left-slanted upward/
right-slanted bottom direction on the screen and then stop at your
destination.
Zoom
Zoom in in Internet Explorer and EziPhoto: Slide your finger in a
right-slanted upward direction on the screen.
Zoom out in Internet Explorer and EziPhoto: Slide your finger in a
left-slanted downward direction on the screen.
153
ASUS status icon
The ASUS status icon allows you to easily check and see the current status of the following device
components: USB, LCD Brightness, Battery power, Memory, and microSD card.
To check the status of these components:
1. Tap
> Settings > System tab> ASUS Status.
2. Select the items you want to check and the show types.
3. Check the box of Show system status icon. Then the ASUS Status icon
screen.
4. Tap
appears on the Today
from the Today screen to check the system status.
USB: Allows you to set the USB connection mode.
Brightness: Tap to adjust the LCD brightness on
battery power or external power.
Battery: Displays the remaining battery power and
allows you to set advanced power saving features,
Program memory: Displays the total, currently used,
and remaining program storage memory.
Storage memory: Displays the total, used, and
remaining storage memory.
Storage card: Tap to display the contents of the
Storage card installed (shows only when a microSD
card is installed).
Settings: Allows you to select the items to display in
this ASUS Status pop-up menu.
154
USB setting
Allows you to set the USB connection mode.
LCD Brightness
Adjusts the LCD brightness on battery power and external power.
Battery
Displays the battery power status.
The Advanced settings allows you to set a time when to turnoff the device if not used.
Program memory
Displays the total, in use, and available program memory.
Memory
Displays the total, in use and free memory.
Storage card memory
Displays the total, in use, and available storage card memory.
NOTE:
This item shows only when a microSD card is installed.
Settings
Allows you to select the items to display in the ASUS Settings popup menu.
155
ASUS Zip
ASUS Zip allows you to compress files to save space of your memory card or device.
To compress files:
1. Tap
> Programs > ASUS Zip.
2. Select the radio button before New compress file, then tap Next.
3. Select files or folders and tap Add button, then tap Next.
4. Rename the file and select the location and compression mode. Check
the Password box if you want to set password for the file. Tap Next.
5. Tap Done to exit. Check the Exit and open folder box if you want to
open the folder where the compressed files are stored.
To add files to an existing compressed file:
1. Tap
> Programs > ASUS Zip.
2. Select the radio button before Add file to existing compressed file, then tap Next.
3. Select a compressed file, then tap Next.
4. Select files or folders you want to add and tap Add button, then tap Next.
5. Tap Done to exit. Check the Exit and open folder box if you want to open the folder where the
compressed files are stored.
156
To extract files from a compressed file:
1. Tap
> Programs > ASUS Zip.
2. Select the radio button before Extract file, then tap Next.
3. Select a compressed file, then tap Next.
4. Select a folder to save the extracted files, then tap Next.
5. Tap Done to exit. Check the Exit and open folder box if you want to open the folder where the
compressed files are stored.
Backup
The Backup function allows you to backup as well as restore your files and data to your device and
storage card.
Backing-up files
To backup files:
1. Tap
> Programs > Backup > Backup.
2. Select the location and the items you want to backup. Then tap Next.
3. Rename the file and select the storage location for the backup. Then tap Next.
4. Enter four digits as your password to encrypt the backup file. Then tap Next.
5. Tap Start to begin backup. Or tap Back to return to the last screen.
NOTE:
The system will turn off all processing applications when backing up files.
6. When finished, tap Reset to reset the device.
157
Setting Backup
To set Backup:
1. Tap
> Programs > Backup. Then tap Option.
2. Check the box if you want the device to automatically reset after backup. Then Tap
finished.
Restoring files
To restore files:
1. Tap
> Programs > Backup > Restore.
2. Select the location and the items you want to restore, then tap Next.
3. Rename the file and select the storage location for the backup, then tap Next.
4. Enter the password to decrypt the backup file, then tap Next.
5. Select the items you want to restore from the backed up files, then tap Next.
6. Tap Start to begin restore. Or tap Back to return to the last screen.
NOTE:
The system will turn off all processing applications when restoring files.
7. When finished, tap Reset to reset the device.
158
when
Newstation
With the Newstation in your device, you can conveniently browse news and blogs anywhere and anytime.
NOTE:		 Ensure that your device is connected to Internet when using Newstation.
Using Newstation
To read RSS news:
1. Tap
> Programs > Newstation.
2. Tap a category folder to open.
3. Tap a channel name to open.
4. Browse your favorite subjects.
To create a new category folder:
1. Tap
> Programs > Newstation.
2. Tap Menu > New Category then edit the category name.
To add a channel:
1. Tap
> Programs > Newstation, then tap a category folder to open.
2. Tap Menu > New Channel. You can add a channel from either Internet or an existing file.
•
Input from URL
			 Select the radio button of Input from URL and enter the URL address. Then tap Next.
			 Select a category where you want to add the channel. Then tap Finish.
159
•
Import from a file
			 Select the radio button of Import from a file, then tap Next.
			 Select a folder and choose a file from the list.
			 Choose channels from the list, then tap Next.
			 Select a category where you want to add the channel, then tap Finish.
Using Newstation menus
Category Menu
To use the category menu:
1. Tap
> Programs > Newstation.
2. Select a category folder. Then tap Menu. The menu list pops up.
3. Tap an option that you need.
Channel Menu
To use the channel menu:
1. Tap
> Programs > Newstation.
2. Tap a category folder, then select a channel and tap Menu.
3. Tap an option that you need.
Subject Menu
To use the subject menu:
1. Tap
> Programs > Newstation.
2. Tap a category folder. Then tap a channel to open. Select a subject and tap Menu. The menu list
pops up.
160
3. Tap an option that you need.
Chapter 13
Other features
• Microsoft® Office Mobile
• ClearVue PDF
• My Secrets
• Auto Cleaner
• Restoring default factory settings
• System information
• Task Manager
• Removing programs
161
Microsoft® Office Mobile
Your device comes with preinstalled Microsoft® Office Mobile applications which enable you to create,
view, and edit spreadsheets, presentations, note, and word files on your device. Use these applications
like you would normally use the Office applications on your computer.
To access these applications tap
use.
ICON
> Programs > Office Mobile. Select the appropriate application to
DESCRIPTION
Excel Mobile allows you to view, create, and edit an Excel spreadsheet.
OneNote Mobile allows you to view, create, and edit an OneNote file.
Powerpoint Mobile allows you to view a powerpoint presentation.
Word Mobile allows you to view, create, and edit a word file.
162
Excel® Mobile
Excel workbooks created on a computer can be opened and edited on your device. However, Excel Mobile
does not fully support some features, such as formulas and cell comments.
Unsupported features
•
•
•
•
•
•
Alignment: Horizontal, vertical, and wrap text attributes remain the same, but vertical text appears
horizontal.
Borders: Appear as a single line.
Cell patterns: Patterns applied to cells are removed.
Fonts and font sizes: Fonts not supported by your device are mapped to the closest font available.
The original font is listed on your device. When the workbook is opened again in Excel on your
computer, the data are displayed in the original font.
Number formats: Numbers formatted using the Microsoft® Excel 97 conditional formatting feature
are displayed in Number format.
Formulas and functions: Formulas containing references past row 16384 are replaced with #REF!
Also, the following formulas are converted to values:
•
•
•
•
•
formulas containing functions not supported by Excel Mobile
formulas entered as an array or containing an array argument. For example,
= SUM({1;2;3;4})
formulas containing external link references or intersection range reference
Protection settings: If a password to open has been specified for a workbook, it can be opened in
Excel Mobile but cannot be modified.
Zoom settings: These are not retained. Excel supports a per worksheet zoom setting, while the
Excel Mobile zoom setting is applied to the whole workbook.
163
•
•
•
•
•
•
•
164
Worksheet names: In a cell in a worksheet, names that reference worksheets within the same
workbook are displayed accurately. Names that refer to other workbooks, arrays such as ={1;2;3;4},
array formulas, or intersection ranges are removed from the name list. If a name is removed from the
list, it is left in formulas and functions, causing those formulas to be resolved as “#NAME?” Tabs that
are hidden in the workbook are not hidden in Excel Mobile.
AutoFilter settings: These are removed. However, you can use the AutoFilter command in Excel
Mobile to perform similar functions. If you have an AutoFilter applied to a worksheet that causes
rows to be hidden, the rows remain hidden when the file is opened in Excel Mobile. Use the Unhide
command to display the hidden rows.
Chart formatting: All charts will be saved the way they are shown in Excel Mobile. Unsupported
chart types are changed to one of these supported types: Column, Bar, Line, Pie, Scatter, and Area.
Background colors, gridlines, data labels, trend lines, shadows, 3D effects, secondary axes, and
logarithmic scales are turned off.
Worksheet features: The following features are not supported in Excel Mobile and are removed or
modified when a workbook is opened on the device: hidden sheets are not hidden; VBA modules,
macro sheets, and dialog sheets are removed and replaced with a placeholder sheet; text boxes,
drawing objects, pictures, lists, conditional formats, and controls are removed; pivot table is converted
to values.
Excel 2007 Binary (.xlsb) workbooks: Not supported.
File conversions:
•
•
.xls/.xlt files cannot be saved as .xlsx/.xltx files, and .xlsx/.xltx files cannot be saved as .xls/.xlt
files
rights-managed and password-protected files can be saved only in their original format.
Mandatory default file conversions upon saving: .xlsm/.xltm to .xlsx/.xltx; and .pxl/.pxt to .xls/.xlt
OneNote® Mobile
OneNote Mobile is a note-taking application. It allows you to capture information in multiple ways and
organize it according to your needs. Besides text, you can also insert audio recording and pictures to your
notes.
Unsupported content types
•
Fonts: Does not support font changing.
•
Content search: Content search is not supported.
•
Audio content: Only audio recorded with the built-in voice recorder is supported.
PowerPoint® Mobile
Powerpoint presentations created on a computer can be viewed but not edited on your device. All file
content is preserved and will be displayed if the presentation is later transferred to a computer, regardless
of whether the content is supported on the device.
Unsupported content types
•
Fonts: Unsupported fonts will be mapped to the closest available font.
•
Password protection: If a password to open has been specified, the presentation cannot be viewed.
If a password to modify has been specified, the presentation can be viewed but not saved using
PowerPoint Mobile.
•
Audio/video content: Only embedded .wav files are supported.
165
Word® Mobile
Word documents created on a computer can be opened and edited on your device. However, Word
Mobile does not fully support some features, such as revision marks and password protection. Some data
and formatting may be lost when you save the document on your device.
Unsupported features
•
Backgrounds: These are not displayed or saved by Word Mobile.
•
Document protection: Word documents can be protected from unauthorized changes by using
Protect Document on the computer. Word Mobile does not support displaying files that have been
protected in this manner.
•
•
•
•
•
•
166
Bi-directional text: While Word Mobile will open documents containing bi-directional text, the
indentations and alignment may be displayed and saved incorrectly.
Fonts and font sizes: Fonts not supported by your device are mapped to the closest font available.
The original font is listed on your device. When a document that has been edited in Word Mobile is
opened on the computer, text is displayed in the original font.
Footnotes, endnotes, headers, footers: These features are not displayed by Word Mobile, but they
are retained when a document is edited and saved on the device. When a document is opened again
on a computer, these features are displayed in their original form.
Lists: Indented lists are not displayed on the device in the same they are displayed on the computer.
They are mapped to closest indentation level supported by Word Mobile. However, the list information
is retained in the document, so when it is opened again on a computer, lists are displayed in their
original form.
Metafiles: These are not retained by Word Mobile. Instead, a graphical representation of the object
will be displayed.
Page breaks: Word Mobile does not display page breaks. However, all page breaks except a break
placed at the end of a document are retained in the document. When a document is opened again on
a computer, page breaks are displayed.
•
•
•
•
•
•
Page borders: Lined page borders are supported. However, artistic page borders are not. The
graphics will be converted to lined borders.
Password-protected files: If a password to open has been specified for a document, it cannot
be opened in Word Mobile. If a password to modify has been specified for a document, it can be
opened in Word Mobile but cannot be modified.
Shapes and text-boxes: These are not displayed or saved by Word Mobile.
Smart tags: These are not displayed or saved by Word Mobile.
File conversions: Files with Office 2003 extensions (.doc, .dot) cannot be saved with Office 2007
extensions (.docx, .dotx), and vice versa. However, these file types can be saved as .rtf and .txt files.
Rights-managed and password-protected file conversions: These files can be saved only in their
original format.
Partially supported features
•
•
•
•
•
Picture bullets: While regular bullets are supported, picture bullets are not. The picture bullets are
not displayed or saved by Word Mobile.
Revision marks: These are not retained. When a document with revision marks is opened in Word
Mobile, the document will appear as though all revision marks have been accepted. When the
document is saved, revision marks will be lost.
Table styles: Some or all of the formatting defined in the style will be lost when a document is saved
by Word Mobile.
Underlined styles: Underline styles not supported by Word Mobile are mapped to one of the four
supported styles: regular, dotted, wavy, or thick/bold/wide.
Legacy Pocket Word files: You can open *.psw files in Word Mobile. However, if you edit a file, you
will need to save it in *.doc, *.rtf, *.txt, or *.dot format.
167
ClearVue PDF
ClearVue PDF allows you to read documents in Portable Document Format (PDF).
To launch the ClearVue PDF application:
•
Tap
> Programs > ClearVue PDF.
To exit the ClearVue PDF application:
Tap File > Exit.
•
168
TO
DO THIS
Open a PDF file
Tap File > Open.... Tap a file to open.
Close an open file
Tap File > Close.
Open a recently
viewed file
Tap File > Recent Files. A list of recently viewed files appears. Tap the file
you want to open.
Zoom the content
of an open file
Tap Zoom. Select the scale you want to use or tap Custom... to customize
the scale.
My Secrets
My Secrets is a secret archive to keep your classified documents, pictures, and video. The items placed
in the My Secrets folder are encrypted for protection. A user-defined password is required to unlock the
folder or change the settings.
You are requested to set up My Secrets before using it.
To set up My Secrets:
1. Tap
> Programs > My Secrets.
2. Select Express Mode (Recommended) then tap Next.
3. Enter a four-digit password and then enter it again to confirm.
4. Tap Finish to exit.
The My Secrets folder in My Documents becomes the encrypted folder. An icon
appears on the Today
screen. Tap
to show the shortcut menu. You can change your password or cancel encryption by
tapping My Secrets Setting on the shortcut menu as shown.
Tap to lock/unlock the folder.
Tap to access the Advanced Settings.
Tap to access the Help center.
Tap to view version info.
169
Auto Cleaner
To free memory, you can use this function to conveniently close the running applications that you are not
using.
To set Auto Cleaner:
1. Tap
> Settings > System tab > Auto Cleaner.
2. Select the check box to activate the Auto Cleaner function, then
select either Short or Long press X to close the program.
3. Tap Setting button to set the Exception and the Forced.
4. Tap
when finished.
Restoring default factory settings
This option allows you to restore the device system to its default factory settings.
To restore default settings:
1. Tap
> Settings > System tab > Default Settings.
2. Enter ‘1234’ in the Password field and tap OK to confirm that you want to restore to default settings.
3. Tap Yes to start restoring.
WARNING: This option will delete all files stored in this device. Backup your important data to your storage card
or computer before restoring to the default settings.
170
System information
The System Information contains important device information including the current device settings and
version.
To launch the System Information:
1. Tap
> Settings > System tab > System Information.
2. Tap the Device Info tab for device hardware information.
3. Tap Version tab to display the ROM, Boot, Radio and Battery version.
Task Manager
The Task Manager allows you to monitor the currently running programs, memory and CPU occupancy.
You can use this function to end these programs easily. You can also switch to any of the listed programs
from the Task Manager screen.
To launch Task Manager:
Tap
> Programs > Task Manager.
To end a program:
Select the program you want to end and tap End Task.
To end all tasks, tap Menu > End All Tasks.
To switch to a program:
Select a program and press down the Navigation key, or tap Menu > Switch To.
171
Removing programs
To free the storage memory of your device, you can remove the programs you installed. But for the
programs preinstalled in your device, you are not allowed to remove them.
To remove a program:
1. Tap
> Settings > System tab > Remove Programs.
2. Select a program you want to remove, then tap Remove.
3. A warning message pops up. Tap Yes to confirm.
172
Appendices
• Notices
• Specific Absorption Rate (SAR)
• ASUS contact information
173
Notices
Federal Communications Commission (FCC) Regulations
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference; and
•
Reorient or relocate the receiving antenna.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is 		
connected.
	2.
This device must accept any interference received, including interference that may cause 		
undesired operation.
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
Increase the separation between the equipment and receiver.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
174
Canadian Department of Communications Statement
Country Code selection feature to be disabled for products marketed to the US/CANADA Operation is
subject to the following two conditions:
1.
	2.
This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired 		
operation of the device.
This Class [B] digital apparatus complies with Canadian ICES-003.
Cet appareil numerique de la classe [B] est conforme a la norme NMB-003 du Canada.
This Category II radiocommunication device complies with Industry Canada Standard RSS-310.
Ce dispositif de radiocommunication de categorie II respecte la norme CNR-310 d’Industrie Canada.
Replaceable batteries
If an equipment is provided with a replaceable battery and if replacement by an incorrect type could result
in an explosion (e.g. with some lithium batteries), the following applies:
• if the battery is placed in an OPERATOR ACCESS AREA, there shall be a marking close to the
		 battery or a statement in both the operating and the servicing instructions;
• if the battery is placed elsewhere in the equipment, there shall be a marking close to the battery
		 or a statement in the servicing instructions.
The marking or statement shall include the following or similar text:
CAUTION:
• RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
• DISPOSE USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
175
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments
within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same
TOOL, or such compartments shall be marked to discourage OPERATOR access.
An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).
Equipment for restricted access locations
For equipment intended only for installation in a RESTRICTED ACCESS LOCATION, the installation
instructions shall contain a statement to this effect.
WARNING: The user needs to switch off the device when exposed to areas with potentially explosive atmospheres
such as petrol stations, chemical storage depots and blasting operations.
Specific Absorption Rate (SAR)
Bodyworn operation
For bodyworn operation, this device has been tested and meets the FCC RF exposure guidelines for
use with an accessory that contains no metal and the positions the handset a minimum of 1.5 cm from
the body. Use of other enhancements may not ensure compliance with FCC RF exposure guidelines. If
you do no t use a body-worn accessory and are not holding the device at the ear, position the handset a
minimum of 1.5 cm from your body when the device is switched on.
Exposure to radio waves
THIS MODEL MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure
to radio waves recommended by international guidelines. These guidelines were developed by the
176
ASUS
Address: 15 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886228943447; Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS - LAMBORGHINI ZX1, are unique to each
unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the
user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM
standards.
Should you have any questions or comments regarding this matter, please have our best attention.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Email: http://vip.asus.com/eservice/techserv.aspx
178
ASUS Contact information
ASUSTeK COMPUTER INC. (AsiaPacific)
Address
Website
Technical Support
Telephone
Support Fax
Software download
15 Li-Te Road, Peitou, Taipei, Taiwan 11259
www.asus.com.tw
+886228943447
+886228907698
support.asus.com*
ASUS COMPUTER INTERNATIONAL (America)
Address	44370 Nobel Drive, Fremont, CA 94538, USA
Telephone
+15029550883
Fax		
+15029338713
Website
usa.asus.com
Software download
support.asus.com*
ASUS COMPUTER GmbH (Germany and Austria)
Address
Telephone
Fax		
Online contact
Technical Support
Telephone
Fax		
Online support
Website
Harkort Str. 21-23, D40880 Ratingen, Germany
+49210295990
+492102959911
www.asus.com.de/sales
+49180595990
+492102959911
www.asus.com.de/support
www.asus.com.de/news
* Available on this site is an online Technical Inquiry Form that you can fill out to contact technical support.
179
180
Electromagnetic compatibility and Radio
spectrum Matters (ERM);Telecommunication
equipment; Electromagnetic
Compatibility (EMC) requirements
EN 300386
EN 55022: 2006
Immunity from radio interference of
broadcast receivers and associated
equipment
EN 55020
Industrial environment
(EC conformity marking)
EN 50082-2 Generic immunity standard Part 2:
Industrial environment
(Stamp)
Safety of household and similar
electrical appliances
EN 50091-1
EN 60950-1
Date : Apr. 11 , 2008
Manufacturer/Importer
Safety requirements for mains operated
electronic and related apparatus for
household and similar general use
EN 60335
General and Safety requirements for
uninterruptible power systems (UPS)
Safety for information technology equipment
including electrical business equipment
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 2006/95 EC
EN 60065
CE marking
3.2 of the R&TTE Directive.
Essential requirements of article 3.2 of of the R&TTE Directive
Part2:Harmonized EN for IMT-2000,CDMA Direct Spread
(UTRD FDD) (UE)covering essential requirements of article
Introduction and common requirements, covering
User Equipment(UE)for IMT-2000 Third-Generation
cellular Networks;-Part1:Harmonized EN for IMT-2000,
EN 301908-1 Electromagnetic compatibility and Radio spectrum
EN 301908-2 Matters(ERM);Base Stations(BS),Repeaters and
EN 50081-2 Generic emission standard Part 2
Limits and methods of measurement
of radio disturbance characteristics of
broadcast receivers and associated
equipment
EN 55013
Disturbances in supply systems caused
EN 61000-3-3:1995+A1:2001
Disturbances in supply systems caused
EN 61000-3-2 :2000+A2:2005
fields (0 Hz to 300 GHz) International
Commission on Non-Ionising
Radiation Protection (1998), Guidelines for
limiting exposure in time-varying electric,
magnetic, and electromagnetic fields
EN 50360/ the limitation of exposure of
EN 50361 the general public to electromagneticnetwork
Information Technology
equipment-Immunity
characteristics-Limits and methods of
measurement
EN 55024:1998+A1:2001+A2:2003
Limits and methods of measurement
of radio disturbance characteristics of
information technology equipment
Harmonized EN for mobile stations in the GSM 900
And GSM 1800 bans covering essential requirements
of article 3.2 of article 3.2 of the R&TTE directive(1999/5EC)
EN301511 Global System for Mobile communications(GSM)
spectrum Matters (ERM); Electromagnetic
compatibility(EMC) standard for radio
equipment and services; Part 17: Specific
conditions for wideband data and
HIPERLAN equipment
EN 301489 Electromagnetic compatibility and Radio
Electromagnetic compatibility and Radio
spectrum Matters (ERM); wideband
transmission equipment operating in
the 2.4GHz ISM band and using spread
spectrum modulation techniques; Part 1:
technical characteristics and test conditions
Part2: Harmonized EN covering essential
requirements under article 3.2 of the R&TTE
EN 300328
(reference to the specification under which conformity is declared)
in accordance with 2004/108/EC-EMC Directive and 1995/5 EC-R &TTE Directive
is in conformity with
PDA Phone
ZX1
( description of the apparatus, system, installation to which it refers)
declare that the product
ASUS COMPUTER GmbH
HARKORT STR. 25
40880 RATINGEN, BRD. GERMANY
(full address)
We, Manufacturer/Importer
Declaration of Conformity
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract
XMP Toolkit                     : 3.1-701
Modify Date                     : 2008:05:05 14:05:14+08:00
Create Date                     : 2008:05:05 14:04:53+08:00
Metadata Date                   : 2008:05:05 14:05:14+08:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Format                          : application/pdf
Document ID                     : uuid:5bbdf227-ee67-45d9-b114-d8d3f511eb4c
Instance ID                     : uuid:0a03ee6a-1a11-45a6-9626-b882eb720f2e
Producer                        : Adobe PDF Library 7.0
Has XFA                         : No
Page Count                      : 70
Creator                         : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSQGALAXY3

Navigation menu