ASUSTeK Computer P527 Quad-band Smart Phone User Manual 1

ASUSTeK Computer Inc Quad-band Smart Phone Users Manual 1

Contents

Users Manual 1

P527User Manual
2E3361First Edition September 2007Copyright © 2007 ASUSTeK Computers, Inc. All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUS Telecom (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
3Table of ContentsTable of Contents ................................................................................... 3P527 specications ............................................................................... 9Package contents ................................................................................ 10Getting to know your P527 ................................................................... 2Layout ..................................................................................................... 12Getting to know your P527 ................................................................. 13Device components description .................................................................... 14Device components description .................................................................... 15Getting your device ready ................................................................... 16Installing the SIM card and battery................................................................ 16Charging the battery...................................................................................... 18Starting up ............................................................................................ 19Powering your device .................................................................................... 19Using the stylus ............................................................................................. 19Calibrating P527............................................................................................ 20Locking the keys and buttons........................................................................ 20The Today screen ................................................................................ 21Status indicators............................................................................................ 22Status indicators............................................................................................ 23
4Status indicators............................................................................................ 24Screen orientation ......................................................................................... 25Start menu..................................................................................................... 26ASUS Launcher .................................................................................... 27Using the ASUS Launcher ............................................................................ 27Using the Input Panel .......................................................................... 30Using the Block Recognizer .......................................................................... 30Using the On-screen keyboard ..................................................................... 31Using the Letter Recognizer.......................................................................... 32Using XT9 input............................................................................................. 33Using the Transcriber .................................................................................... 34Writing and drawing on the screen .................................................... 35Recording voice ................................................................................... 36Using ActiveSync™ ............................................................................. 38Synchronizing via mini-USB .......................................................................... 40Synchronizing with Exchange Server ................................................ 41Setting the synchronization schedule............................................................ 43Searching information ......................................................................... 44Getting Help ......................................................................................... 45Using phone ......................................................................................... 48Phone pad ..................................................................................................... 48Adjusting the volume ..................................................................................... 48Making a call ........................................................................................ 49
5Using the alphanumeric keypad .................................................................... 49Phone pad features ....................................................................................... 50Using Smart dialer......................................................................................... 50Making calls from Contacts ........................................................................... 51Making calls from Call History ....................................................................... 51Using the Speed Dial .................................................................................... 52Using Voice Commander .............................................................................. 53Receiving a call .................................................................................... 54ASUS CallFilter .................................................................................... 55Launching ASUS CallFilter ............................................................................ 55Using ASUS CallFilter ................................................................................... 57Managing the Accept list ............................................................................... 58Managing the Reject list ................................................................................ 59Using the Wireless Manager ............................................................... 62Using Bluetooth® ................................................................................. 63Overview ..................................................................................................... 63Activating Bluetooth in your device ............................................................... 63Adding Bluetooth devices.............................................................................. 64Using Wi-Fi® ......................................................................................... 67Turning on Wi-Fi ............................................................................................ 67Conguring wireless networks ...................................................................... 68Adding a wireless network ............................................................................ 69Using Wi-Fi Manager .................................................................................... 70Setting a GPRS connection ................................................................ 72
6Connecting GPRS ......................................................................................... 75Disconnecting GPRS .................................................................................... 76Using the GPRS Tool .................................................................................... 77GPS Catcher ......................................................................................... 79Updating GPS data ....................................................................................... 79Setting GPS Catcher ..................................................................................... 80Travelog ................................................................................................ 81Turning on GPS ........................................................................................... 81Recording Travel Track ................................................................................. 82Exporting Route ............................................................................................ 85Creating a New POI ..................................................................................... 88Travelog Setting ............................................................................................ 89GPS Setting .................................................................................................. 89Location Courier .................................................................................. 96Using Location Courier.................................................................................. 96External GPS ........................................................................................ 99Setting external GPS device ......................................................................... 99Using the camera ............................................................................... 102Launching the camera................................................................................. 102Available capture modes ............................................................................. 103Supported formats....................................................................................... 103Camera mode screen.................................................................................. 104Camera mode icons .................................................................................... 105Camera options menu ................................................................................. 106
7Taking photos ...............................................................................................111Video mode screen ......................................................................................112Video mode icons .........................................................................................113Video options menu .....................................................................................114Recording videos .........................................................................................117Viewing pictures and videos .............................................................118Viewing pictures and videos .........................................................................118Remote Presenter .............................................................................. 120Using the Remote Presenter ....................................................................... 120Backup ................................................................................................ 127Backing-up les ........................................................................................... 127Restoring les ............................................................................................. 129Backup Setting ............................................................................................ 131Meeting Time Planner ........................................................................ 132NewStation ......................................................................................... 134Reading NewStation news ......................................................................... 134Creating a new category ............................................................................ 134Adding a new channel ................................................................................ 135NewStation Menus ...................................................................................... 138FM Radio ............................................................................................. 139Listening to FM radio................................................................................... 139Adding a new channel ................................................................................ 139Managing My Channel list ........................................................................... 140Conguring FM Settings.............................................................................. 141
8Windows Live™ ................................................................................. 142Signing up ................................................................................................... 142Setting ring tone ................................................................................ 147Adding ring tone to selection ....................................................................... 147Changing the ring tone ................................................................................ 148Wake-up setting ................................................................................. 149Mode switcher .................................................................................... 150Auto Cleaner ...................................................................................... 151Setting Auto Cleaner ................................................................................... 151System information ........................................................................... 152Restoring default factory settings ................................................... 153ASUS status icon ............................................................................... 156USB setting ................................................................................................. 157LCD Brightness ........................................................................................... 158Battery ................................................................................................... 158Memory ................................................................................................... 159Storage card memory.................................................................................. 159Programs Running in memory .................................................................... 160Settings ................................................................................................... 160Notices ................................................................................................ 162RF Exposure information (SAR) ....................................................... 166Safety information ............................................................................. 168Contact information ........................................................................... 176
9P527 specicationsProcessor TI OMAP 850Operating System Microsoft® Windows Mobile™ 6 ProfessionalMemory 128 MB NAND Flash ROM64 MB SDRAMDisplay 2.6-inch, 320 x 240 TFT Touchscreen Liquid Crystal Display (LCD) with 65,536 color and LED back-lightingFrequency band Quad-band GSM (850/900/1800/1900 MHz) Integrated GSM/GPRS/EDGE and GPS with internal antennaGPS Built-in SiRF star III chipsetGPRS Class B, Multislot class 10Camera 2.0 mega-pixel Auto Focus camera Connectivity Bluetooth : V2.0+EDR USB : USB Client 1.1 WLAN : IEEE 802.11b+gBattery capacity 1300 mAh Lithium IonExpansion slot MicroSD card slotAudio 2.5 mm audio port Built-in microphone and stereo output speakerWeight 129g (with battery)Dimension 113mm(L) x 58mm(W) x 15.4 mm(T)Talk time* 4 hrs (*vary with different networking environment and scenario) Standby time* 150 hrs (*vary with different networking environment and scenario)NOTE: Specications are subject to change without notice.
10Package contentsCheck your P527 package for the following items:P ASUS P527 device P Protection caseP Battery P Getting Started CDP AC Adapter P User ManualP Mini-USB cable P Quick Start GuideP Headset P Warranty CardP Stylus P microSD*P Car cell phone charger* P Bonus CD*P Car Kit (PDA holder and windshield suction pedestal)*P Navigation CD & manual**Optional, depend on the areaNOTE: • The Protection case is only for protective usage and not a body-worn accessory. • If any of the above items is damaged or missing, contact your retailer.CAUTION: • To reduce risk of re, use only correct battery type. Refer to “Installing the SIM card and battery” section for details. • Do not attempt to disassemble or service the battery pack. • Dispose of used batteries properly. Inquire from local authorities for proper disposal of battery.
11Getting startedChapter• Getting to know your P527• Getting your device ready• Starting up• The Today screen1
12Getting to know your P527Components: Power button Jog dialI OK button Notication LED Earpiece receiver LCD touch screen Left Soft key Start button Navigation Key OK button Call Key Right Soft Key End Key Voice Commander/Record button Clear key Alphanumeric keypad Location courier key Travelog button Bluetooth Button FM keypad Message button Mode switcher button 12345678910111213141516LayoutTop featuresLeft side featuresFront features461012358911 13161415712171821192022171819202122
13Getting to know your P527Bottom featuresRight side featuresRear featuresComponents: Camera lens Stereo speaker Battery compartment Hold button Reset button Camera button MicroSD slot Stylus Headphone slot Mini-USB connector 242526272829303132MicroSD Reset3028232526272924 233132
14Device components descriptionNo. Item Description1Power button Press once to set suspend mode or to wake device from sleep mode. Press and hold to turn the power ON or OFF.2Jog dial This three-direction jog dial allows you to conveniently navigate through menus without necessarily using the stylus.3OK button Press to conrm a command or press to close/exit an open application. Press and hold to adjust the voice volume.4Notication LED This multi-color LED noties the following: • Green - Phone fully charged. • Flashing green - Network detected. • Red - Phone is charging. • Flashing red - Event notication. • Flashing blue - Bluetooth® ,WiFi, or GPS is ON.5Earpiece receiver Allows you to listen to incoming/outgoing calls.6LCD touch screen This 2.6-inch, 65,536-color, 240 x 320-resolution, touchscreen TFT LCD allows you to write, draw, or make selections using the stylus.7Left Soft key Performs the command indicated above the button.8Start button Press to launch the Start menu.9Navigation key This ve-direction navigation key allows you to navigate through menus. Press down to conrm a command.10 OK button Press to conrm a command or press to close/exit an open application.11 Call key Press to receive an incoming call or to make a call.12 Right Soft key Performs the command indicated above the button.13 End key Press to end a call or a GPRS connection.
15Device components descriptionNo. Item Description14 Voice Commander/Record buttonPress to launch the Voice Commander application. Press and hold to launch voice recording.15 Clear key Press to clear enter character to the left.16 Alphanumeric keypad Allows you to input text and numbers.17 Location courier key Long press to launch Location courier key.18 Travelog button Press to launch Travelog application.19 Bluetooth button Allows you to enable or disable Bluetooth application.20 FM keypad Press to launch FM radio application.21 Message button Press to launch Messaging application.22 Mode Switcher button Allows you to switch applications.23 Camera lens 2-mega pixel xed lens for taking pictures.24 Stereo speaker Allows you to listen audio media and phone calls.25 Battery compartment Contains the battery that supplies power to the device.26 Hold button Slide to enable or disable all keys including the LCD touch screen.27 Reset button Using the stylus, press reset button to soft-reset your device28 Camera button Press and hold over three seconds to launch the camera. In camera mode, press to take a picture. In video mode, press to start recording video and press again to stop.29 Micro-SD slot Insert a Micro-SD storage card into this slot.30 Stylus Use the stylus to write, draw, or select items on the touch screen.31 Earphone port Plug headset accessory to this port32 Mini-USB connector Use this connector to synchronize your data or to charge the battery.
16Installing the SIM card and batteryBefore you can make a phone call using your P527, you need to install a Subscriber Identity Module (SIM) card. A SIM card contains your phone number, subscriber details, phonebook, and additional phone memory.Your P527 comes with a rechargeable Lithium-Ion battery.New batteries come partially discharged and should be fully charged before using them. They generally do not reach their rated capacity until they have been charged and discharged at least four (4) times. We recommend that new batteries be charged overnight even though they may indicate that the charge is complete after a few hours. Sometimes charging may stop during the initial charge and it is necessary to remove the battery for approximately fteen (15) minutes and then put it back on charge.Getting your device ready1. Remove the battery compartment cover.NOTE: When turned on, the device automatically turns off after you open the battery compartment to prevent data loss.CAUTION: Use only an ASUS qualied battery.To install a SIM card and battery:
172. Remove the battery.3. Insert the SIM card with its gold contacts facing down and the notched corner oriented to the upper left corner of the slot as shown.4. Replace the battery into the compartment with its copper contacts properly aligned to the copper conductor on the device.5. Replace battery compartment cover.
18Charging the batteryThe bundled battery pack is shipped partially charged. Charge the battery up to four (4) hours before using for the rst time. To charge battery:1. Connect the AC adapter plug to the mini-USB connector at the bottom of the device.2. Connect the AC power plug to a grounded wall socket or power strip.NOTE: • The notication LED turns red and charging battery icon appears on the status bar indicating that the battery is charging. • If your battery gets totally discharged, you need to recharge it for at least twenty minutes before you can turn it back on.
19Powering your deviceMake sure that your P527 is fully-charged before starting the device for the rst time. To turn on power:1. Press and hold the power button.Power buttonStarting up2. Follow onscreen instructions to align screen and set the local time zone.Using the stylusThe stylus is a pen-like device found behind the upper right corner of your P527. • Use the stylus to write, draw, select, or drag an item on the screen. • Single-tap an item to select it.• Tap and hold an item to see a menu. Stylus
20Calibrating P527Calibrating your device ensures that the item you tap on the screen is activated. This involves tapping in the center of targets that appear in various coordinates on the screen.To calibrate your screen:Locking the keys and buttonsYou can lock the keys and buttons of your device to avoid inadvertently dialing numbers or launching any application. To lock the keys and buttons:1. Locate the Hold button on the right side of your device.2. Slide the hold button downward to lock. 3. To unlock, slide the hold button upward. Hold button1. Tap Start > Settings > System tab then tap Screen icon.2. On the General tab tap Align Screen then follow succeeding calibration screen instructions.MicroSD Reset
21Tap to open the Start menuTap to setup date, time, and alarmTap to launch Wireless ManagerTap to set user informationTap to open messagesTap to setup tasksTap to setup proleTap to launch Live search engineTap to display call historyIndicates the battery statusTap to adjust volumeDisplays the signal status(The icon shows no SIM card and no signal When no SIM card is installed.)Tap to view connectivity statusTap to set Call FilterTap to display device storage, USB setting, LCD brightness, battery, memory, and MicroSD status Tap to launch Contacts listTap to change screen orientationDisplays the Bluetooth® /WiFi connection statusThe Today screenThe Today screen displays information useful to you. You can congure the Today screen to have all the important information you need.• To access the Today screen, tap Start > Today.• To personalize the Today screen, tap Start > Settings > Personal tab > Today.The following describes the common information found on the today screen:Status barTap to read or make appointmentsTap to sign in Windows Live
22Status indicatorsRefer to the table below for the Today screen icon status indicators.Icon DescriptionGeneral Packet Radio Services (GPRS) available.Connecting via GPRS.Connected via GPRS.Connecting with ActiveSyncActiveSync connection not active.ActiveSync synchronization in progress. Synchronization error.Call forwarded.Call in progress.Call on hold.Missed call.New Short Messaging Service (SMS) message.
23Status indicatorsIcon DescriptionNew voice mail.New Multimedia Messaging Service (MMS) message.No cellular phone service.No signal.Searching for cellular phone service.Indicates signal strength.Sound OFF.Sound ON.Battery low. Battery extremely low. Battery partially charged.Battery charging.
24Status indicatorsIcon DescriptionBattery fully charged. Roaming service. This icon appears only if you have international roaming feature. Vibrate or Meeting mode on. Bluetooth headset connected. Bluetooth head connected with sound. Appears when you set the alarmNo SIM installed. Notice indicator. Tap to view notice.
25Screen orientationYou can set the screen to three different orientations:1. Portrait2. LandscapeSet to Portrait mode to get a better view or better operation of certain applications on your device. Set to Landscape when viewing pictures, video or viewing longer text les.To change the screen orientation, tap Start > Settings > System tab > Screen then select the orientation you want.You can also change the orientation by tapping the icon. Portrait modeLandscape mode
26Start menuThe Start menu contains various programs and applications that you commonly use. Tap Start to display the start menu items:You can also customize the items that appear in the Start menu.To do this:1. Tap Start > Settings > Personal tab > Menus.2. Select the check boxes of the items you want to appear in the Start menu. You can select up to seven (7) items.Portrait mode Landscape mode
27ASUS Launcher is an alternative program that allows you to conveniently and quickly launch applications, perform tasks, and change device settings.You can run the Program from Start > Programs> ASUS Launcher, or tap ASUS Launcher at the lower left corner of the Today screen.Using the ASUS LauncherASUS LauncherTap to access MS Ofce, list tasks, set appointments, or jot notes.Tap to modify your device prole. You can also adjust the device audio and sound.Tap to launch games and applications menu.Tap to launch Internet Explorer, Messenger, and Windows Live.Tap to display your call history list. You can also make a call, send a message, delete call history, and check or reset call timer from this section. Tap to access submenus and modify the Audio, Personal, System, and Connection settings. You can also display your device information or restore the default settings of your device from this option.Tap to access messaging tools that allows you to write/read e-mail, MMS, or text messages.Tap to launch camera.Tap to launch Media Center and view pictures/video, or search for les.Tap to launch applications.Tap to display the Contacts list. Tap to display items of GPS related applications.
28
29Entering dataChapter• Using the Input Panel• Writing and drawing on the screen• Recording voice• Using ActiveSync™• Synchronizing with Exchange Server• Searching information• Getting Help2
30Using the Input PanelWhen you start an application or select a eld that requires text, symbols, or numbers, the Input Panel icon appears on the menu bar. The Input Panel allows you to select various input methods including: XT9, Block Recognizer, Keyboard, Letter Recognizer, and Transcriber. Using the Block RecognizerThe Block Recognizer allows you to use a single stroke to write letters, numbers, symbols, or punctuations, which are converted into typed text.To use the Block Recognizer:1. In an application, tap the Input Panel arrow, then tap Block Recognizer.2. Write letters, numbers, symbols, or punctuations in the designated writing area.Input panel• Write letters on the abc (left) area of the box.• Write numbers on the 123 (right) area of the box.• Tap the special symbols button to input symbols, punctuations and other special characters.• Tap Help “?” button for help on how to write characters. Tap for special characters
31Using the On-screen keyboardWith the on-screen keyboard, you can input text, symbols, numbers, or other special characters when input is possible. To input text using the on-screen keyboard:1. In an application, tap the Input Panel arrow, then tap Keyboard.2. Input text by tapping keys on the on-screen keyboard.Input panelTo enlarge the on-screen keyboard:1. Tap the Input Panel arrow, then tap Option.2. Select Keyboard from the Input Method list.3. Tap Large Keys.
32Using the Letter RecognizerWith the Letter Recognizer you can write individual letters, numbers, or special characters, which are converted into typed text.To use the Letter Recognizer:1. In an application, tap the Input Panel arrow, then tap Letter Recognizer.2. Write letters, numbers, symbols, or punctuations in the designated writing area. • Write capital letters on the ABC (left) area of the box. • Write lower case letters on the abc (middle) area of the box. • Write numbers on the 123 (right) area of the box. • Tap the special symbols button to input symbols, punctuations and other special characters. • Tap Help “?” button for help on how to write characters. Input panelTap for special characters
33Using XT9 inputXT9 allows you to enter text in alpha-numeric format. As you key in alpha-numeric texts on the keypad, XT9 automatically matches your input with most likely the completed word.Press to delete character or selected text to the leftAlpha-numeric keypadTo switch to XT9 input, tap the Input Panel arrow, then tap XT9.XT9 input shortcuts• To key in a word or number, tap the keys on the keypad. • To insert a word or number from the word list: a. Use jog dial to move highlighted bar on word list. b. Press jog dial to add selected word or number. c. Press to delete previous character or highlighted text.Word listTap to select a language.XT9 SettingsTo set XT9 according to your preference:1. Tap Start > Programs > XT9 Settings.2. Select your desired functions from the listed items:3. Tap .
34Using the TranscriberTranscriber is a handwriting recognition program that allows you to write in cursive, print, or mixed styles. It reliably recognizes not only written text but also numbers and symbols. Make sure to write legibly. See Help for more information on the Transcriber.To use the Transcriber:1. Start an application that accepts user input, such as Notes or Word Mobile.2. Tap the Input Panel arrow, then tap Transcriber.To write using Transcriber (using Notes):1. Tap screen to position the cursor where you want the text to appear.2. Use the stylus to write on the screen. The handwriting will be converted to text after you lift the stylus from the screen.To edit text:1. Draw a line across the text you want to edit. After you lift the stylus from the screen, the line will disappear and the selected text will be highlighted.2. You can now rewrite the text or use the Transcriber gestures to edit your selected text. See Help for the Transcriber gestures.Input panelTap for Help
35Writing and drawing on the screenYou can write or draw directly on the screen and save notes in your own handwriting. If you prefer to use your own handwriting or use drawings in your notes, set the default input mode to Writing. If you prefer text, set the default mode to Typing.To set the default input mode for Notes:1. Tap Start > Programs > Notes.2. From the Notes list, tap Menu > Options.3. In the Default mode: box, tap the down arrow and select any of the following: • Writing - if you want to draw or enter handwritten text in a note. • Typing - if you want to create a typed note.4. Set the other options according to your preference. 5. Tap when nished.To write a note:1. Tap Start > Programs > Notes.2. From the Notes list, tap New. If you set the Default mode to Typing, a blank page appears for typed text. If you set the Default mode to Writing, a page with horizontal lines appears for handwritten text. You can also tap Menu and then select/deselect Draw option to switch between typing and writing mode. 3. Write/Draw on the screen.4. When nished, tap to save the note and return to the Notes list.
36Recording voiceAt any time, whether your phone is on stand-by or active mode, you can record sound, voice, or add a recording to a note while using your device.To create a voice recording:Press and hold the Voice Commander button to begin recording.Or, you can follow the given steps:1. Tap Start > Programs > Notes.2. From the Notes list, tap New.3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar.4. Tap the record icon to begin recording.5. Place the receiver near your mouth or source of sound.6. Tap the stop icon when nished recording. A recording icon appears on the note.7. Tap .Press and hold to launch voice recorder
37To add a recording to a saved note:1. Tap Start > Programs > Notes.2. From the Notes list, tap to open a saved note.3. If you do not see the recording toolbar, tap Menu > View Recording Toolbar. 4. Tap the record icon to begin recording.5. Place the receiver near your mouth or source of sound.6. Tap the stop icon when nished recording. A recording icon appears on the note.7. Tap .
38Using ActiveSync™ActiveSync™ allows you to synchronize data in your device with data in your computer. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, provided that your cellular phone service or company is running Microsoft Exchange Server with Exchange ActiveSync. When synchronized directly with Exchange Server, you can stay up to date even when your PC is turned off.During synchronization, ActiveSync compares the data in your device with the data in your computer or Exchange Server, and updates all data with recent changes. You can select and synchronize data in the following locations using ActiveSync:• Contacts• Calendar• Email• Tasks• Notes• Favorites• Files• MediaYou can also exchange data between your computer and device without synchronizing.ActiveSync is already installed in your device, but before you can synchronize data with your computer, you must rst install ActiveSync in your computer. Install ActiveSync from the Microsoft Getting Started CD that came with your device package.After you have installed ActiveSync, set up a sync relationship between your device and your computer. ActiveSync recognizes your device and automatically transfers the synchronization settings you have in your device.
39If you wish to synchronize your device with Exchange Server through your company or service provider, obtain the name of the Exchange Server, user name, password, and domain name from your network administrator before starting the Sync Setup Wizard.To install and congure ActiveSync in your computer:1. Insert the Microsoft Getting Started CD that came with your device package.2. Follow succeeding screen instructions.3. After the setup is complete, the Sync Setup Wizard automatically starts when you connect your device to your computer. Follow screen instructions to complete the wizard.4. From the Sync Setup Wizard, you can: • Congure an Exchange Server connection to synchronize directly with an Exchange Server. Acquire from your network administrator the required parameters for input. • Create a synchronization relationship between your computer and your device.5. Select the information type that you want to synchronize.6. After you nish the wizard, ActiveSync automatically synchronizes your device. You can disconnect the device after the synchronization is complete. NOTE: • When connected, your device is automatically synchronized with your computer. ActiveSync synchronizes everytime you make a change on either the device or computer. • You cannot use WLAN to synchronize database. • Refer to your Windows® Mobile Help, for more information about ActiveSync synchronization.
40Synchronizing via mini-USBYou can connect to your device using the bundled mini-USB cable to synchronize to your computer.To synchronize your device via mini-USB:1. After installing ActiveSync to your computer, connect the mini-USB plug to the mini-USB connector at the bottom of the device.2. Connect the other end of the USB cable to your computer. Upon connection, ActiveSync automatically synchronizes your device.
41To synchronize your device with Exchange Server:Synchronizing with Exchange Server1. From the ActiveSync menu, tap Menu > Add Server Source.2. In the Server Address eld, input the name of the server running Exchange Server then tap Next. If necessary, tap the check box This server requires an encrypted (SSL) connection.
424. Tap the check boxes to select the data items that you want to synchronize with Exchange Server. To change the available synchronization settings, select a data item then tap Settings. Tap Finish when done.3. Input your name, password, and domain then tap Next.5. Start the sync process.
43Setting the synchronization scheduleTo set the synchronization with Exchange Server:1. From the ActiveSync screen, tap Menu > Schedule.2. Refer to the table for input details.Volume Recommended setupHigh Select a shorter interval in the Peak times list.Low Select As items arrive option or a longer interval in the Off-peak times list.While roaming Check Use above settings while roaming.Sending messages Check Send/Receive when I click Send.
44Searching informationUsing the search tool, you can search for les and other items stored in your device or the external MicroSD card. You can search by le name or by words located in various applications including the Calendar, Contacts, Excel Mobile, Word Mobile, Outlook Mobile, Help, Messaging, Notes, all data and Tasks. You can also lter your search to les larger than 64 KB. To search for a le or an item:1. Tap Start > Programs > Search.2. In Search for eld, input the le name, word, or other information you want to search. 3. In Type eld, select the data type to help you lter your search.4. Tap Search. Found items are listed in Results.5. In the Results list, tap the item with the information you need.
45Getting Help You can easily nd Help for using any program on the device.To get help for a program:• From the Today screen or program, tap Start > Help. A page will open with links to topics that explain how to use the program.
46
47Phone featuresChapter• Using the phone• Making a call• Receiving a call• ASUS CallFilter3
48Using phoneLike a standard cellular phone, you can use your P527 to make and receive calls. You can also keep a history of calls made and received, send SMS or MMS messages, take notes while talking, call from Contacts, and copy data from installed SIM card to your device.Phone padThe phone pad allows you to easily dial and access the Contacts, Call History, Speed Dial, and Phone settings. To launch the Phone pad, do any of the following:• Tap Start > Phone.• Press .Adjusting the volumeTo adjust the phone or device volume:1. Tap from the status bar.2. From the volume menu, you can: • Move the slider to adjust device or phone volume. • Tap On, Vibrate, or Off to change the system and ringer volume settings. • Use the jog dial to adjust volume or set mode.
49You can make a phone call using the phone pad. You can also make calls directly from the Contacts, Call History, Speed Dial, or Voice Commander.Using the alphanumeric keypadTo make a call using the alphanumeric keypad:1. Ensure the device is not on hold.2. Input the number of the party you want to call then press Call key. If you pressed the wrong number, press Clear key to erase number to the left. 3. Talk to the called party when connected.4. When nished, press End key to end the call.Making a callPress to end callPress to call dialled number Press to clear input to the leftAlphanumeric keypad
50Phone pad featuresPress to hold /unhold callPress to end callPress to launch menuDisplays the current call statusPress to mute/unmutePress to launch Contacts listPress to launch keypadPress to turn speaker ON/OFFPress to take notesUsing Smart dialerSmart Dialer utilizes the predened alphabets or letters assigned to keys 2, 3, 4, 5, 6, 7, 8, and 9. Example: has letters a, b, and c. has d, e, f; and so on. Following the sequence of keys pressed, Smart Dialer displays items from your Contacts or previous calls containing the alphabets of the pressed key. As shown in the example, keys 3, 4, and 2 were pressed, so all items beginning with the letter d, e, or f; items whose second letter is g, h, or i; and items whose third letter is a, b, or c are displayed.
51Making calls from ContactsTo make a call directly from Contacts:1. Press the Right Soft key or from the Today screen, tap Contacts.2. You can do any of the following to make a call: • Tap name of contact, then from the Contacts screen, tap Call. • Tap name of contact, then press the Call key. • You can also tap and hold the contact, and from the shortcut menu tap Call Work, Call Home, or Call Mobile. • Tap Enter a name... then enter the name or number you want to call from Contacts. Press the Call key to dial the highlighted item.Making calls from Call HistoryTo make a call from the call history:1. Tap Start > Phone.2. On the Phone pad, tap the Call History button.3. Scroll to the desired contact or phone number, then tap Call. To look for more numbers in other categories, tap Menu > Filter and tap a category.Call History button
52Using the Speed DialWith Speed Dial you can call frequently dialled numbers in a single press. For example, if you assign a contact to the number 2 button in Speed Dial, press and hold to dial the contact’s number. To create a Speed Dial entry:1. Make sure that the entry you want to create is already in the Contacts list.2. Tap Start > Phone.3. Tap the Speed Dial button on the Phone pad.4. Tap Menu > New.5. Tap a contact from the list then tap Select.6. In the Location box, select an available key then tap OK.To delete a Speed Dial entry:• In the Speed Dial list, tap and hold an entry then tap Delete.
53Using Voice CommanderTo make a phone call using voice commander:1. Press the Voice Commander button.2. From the following screen, your device asks you to “Say command.” 3. Audibly say “Call” then the name to call from your Contact list.4. Say “Yes” or “No” after the conrmation question. If you said “Yes”, the application proceeds and dials the number; otherwise, it returns to the Voice Commander menu.5. Say “Goodbye” or tap to exit Voice Commander.NOTES: To use Voice Commander while using a headset, press the answer button* on the headset then follow given instructions. (* Answer button may not be available in some headset models.)Press to launch Voice Commander
54When you receive a call, a message prompts and allows you to answer or reject the incoming call.To answer or reject an incoming call:• To answer a call tap Answer, or press Call key.• To reject an incoming call, tap Ignore, or press End key.TIP: Press and hold Call key to switch receiver to speakerphone mode.Receiving a callTo terminate a call:• Tap End or press End key to terminate an incoming or outgoing call.The following pop-up screen appears during an incoming call:• Tap Answer to receive call or• Tap Ignore to dismiss call.Call key End key
55ASUS CallFilterThe ASUS CallFilter is a simple yet efcient utility that allows you to control all your incoming calls. Using this utility, you can manage a list of telephone numbers from your Contacts list, Call logs, Message number, or any unlisted telephone number that you want to accept or reject.Launching ASUS CallFilter Tap from the Today screen to launch the ASUS CallFilter. Tap to launch CallFilter
56The rst time you launch ASUS CallFilter, you need to install and select the storage location for ASUS CallFilter. The following describes the steps when running ASUS CallFilter the rst time.1. After tapping , from the Today screen, the utility installs the necessary cabinet (.cab) les to your device. Follow succeeding screen intructions to complete the process.2. When prompted, select storage location then tap Install.3. When nished, tap Ok to restart your device.IMPORTANT: The installation may take a few seconds to complete. DO NOT turn off your device during the installation process.
57Using ASUS CallFilterAfter installing the necessary les, tap to launch the ASUS CallFilter shortcut menu. The shortcut menu allows you to conveniently activate either the Accept or Reject list.From the shortcut menu, do any of the following:CallFilter shortcut menu• Tap Accept List to activate Accept list and receive only incoming calls whose numbers are in the Accept list.• Tap Reject List to activate Reject list and reject all incoming calls whose numbers are in the Reject list.• Tap Edit to open the CallFilter utility screen.• Tap Close to deactivate CallFilter.
58Managing the Accept listThe Accept list allows you to select telephone numbers you only want to accept. Incoming calls that are not in the Accept list will automatically be rejected.To add items in the Accept list:1. From the ASUS CallFilter shortcut menu, select Edit.2. Select Accept List from Edit List box.3. Select source of data. You can get data from your Contacts, Call logs, Message number, and you can select any anonymous or key in a new number.4. From the list (e.g. Contacts), select an item then tap Add. You can also tap to add a new Accept list item.5. Click to exit. To remove items from the Accept list, select a contact from the Accept list then tap Remove or .234
59Managing the Reject listThe Reject list allows you to select telephone numbers you want to reject. Incoming calls that are in the Reject list will be rejected.To add items in the Reject list:1. From the ASUS CallFilter shortcut menu, select Edit.2. Select Reject List from Edit List box.3. Select source of data. You can get data from your Contacts, Call logs, Message number, and you can select any anonymous or key in a new number.4. From the list (e.g. Contacts), select an item then tap Add. You can also tap to add a new Reject list item.5. Click to exit. To remove items from the Reject list, select a contact from the Reject list then tap Remove or .342
60
61Wireless featuresChapter• Using the Wireless Manager• Using Bluetooth®• Using Wi-Fi• Setting a GPRS connection4
62Using the Wireless ManagerThe Wireless Manager allows you to enable or disable your wireless connections in a single location. This is a quick way to preserve battery power or to prepare your device for an airplane ight.To use the Wireless Manager:1. Tap Start > Settings > Connections tab.2. Tap Wireless Manager.3. From the Wireless Manager screen, do any of the following: • Tap the button for a desired wireless connection type to turn it on or off. • Tap to turn off all wireless connections. • Tap Menu to change settings for one of the displayed wireless connection types.Tap to turn Wi-Fi connection on or offTap to turn Phone connection on or offTap to turn Bluetooth® connection on or offTap to exit Wireless Manager Tap to disconnect cellular data or change settings4. Tap Exit or to exit Wireless Manager.Tap to turn off all wireless connections.
63OverviewBluetooth® is a short-range wireless communications technology that allows devices with Bluetooth capabilities to exchange data within a radius of about 10 meters (30 feet) without requring a physical connection. With Bluetooth enabled in your device, you can:• Connect and communicate (i.e. beam les, tasks, contacts) with other devices with Bluetooth features.• Use Bluetooth service. After you connect to another device or computer using Bluetooth, you can use the services available on that device.Activating Bluetooth in your deviceUse the Wireless Manager to enable or disable Bluetooth in your device. You can access the Wireless Manager by performing any of the following: 1. Launch the Wireless Manager. To do this, you can either: • Tap Start > Settings > Connections tab > Wireless Manager. • Tap the Wireless Manager icon from the Today screen.2. From the Wireless Manager screen, tap Bluetooth. Using Bluetooth®NOTES: When not in use, deactivate Bluetooth in your device to conserve battery power.Tap to launch Wireless Manager
64Adding Bluetooth devices1. Ensure that Bluetooth is enabled on the device you want to add and the device is set as Discoverable.2. Tap Start > Settings > Connections then tap Bluetooth icon.3. Tap Add new device... to search for available Bluetooth devices. The search may take a while.4. Select the device you want to connect with then tap Next or press the Right Soft key.
656. Enter the display name for this connection.5. Enter the alphanumeric passcode of the device you want to connect then tap Next or press the Right Soft key. You can nd the passcode in the documentation that came with the other device.
667. Repeat steps 3 - 6 to connect more devices.
67Using Wi-Fi®The Wi-Fi icon on the Today screen gives you easy access to the Wi-Fi feature on your device. Tapping the icon displays a menu that allows you to:• Turn Wi-Fi on or off• Open Wi-Fi ManagerNOTE: You can use the Bluetooth® and Wi-Fi features simultaneously.Turning on Wi-FiTo turn on Wi-Fi:1. From the Today screen, tap > Turn on Wi-Fi. The Device then automatically scans for all available wireless networks within the Wi-Fi range.2. From the list of detected wireless networks, select a wireless network that you want to connect the device to.3. Select whether the wireless network connects to The Internet or Work network. 4. Tap Connect. The device then connects to the selected network.
68To congure a wireless network: 1. To launch the Wi-Fi settings page, you can either: • Tap Settings after selecting a wireless network to connect your device to. • Tap Start > Settings > Connections tab > Wi-Fi. 2. On the Congure Wireless Networks screen, tap an available wireless network, then make the necessary changes. If the wireless network you want to connect to is not on the list, tap Add New.... Refer to the succeeding sections for details on how to add new wireless networks. Tap the Network Adapters tab and select an adapter. Tap an adapter to set it if necessary. 4. Tap when done.Conguring wireless networks
69Adding a wireless networkIf the device fails to automatically detect the wireless network you want to connect to, you can add the network. Ask for the wireless network settings from your network administrator.To add a wireless network: 1. To launch the Wi-Fi settings page, you can either: • Tap Settings after selecting a wireless network to connect your device to. • Tap Start > Settings > Connections tab > Wi-Fi. Then tap Wireless > Add New.... 2. Enter a name for the network and select an item from the Connects to: drop-down menu. Then tap Next. 3. Set authentication, data encryption, and network key. Ask your network administrator for these information. Then tap Next.4. If you need to change the EAP type, check the adapter box and then change the EAP type.5. Tap Finish when done.
70Using Wi-Fi ManagerThe Wi-Fi Manager shows connection status and information on a wireless network, and allows you to manually scan your area for available wireless networks.To open the Wi-Fi Manager, you can either of the following:• Tap > Wi-Fi Manager. • Tap Start > Settings > Connections tab > Wi-Fi Manager.There are four tabs in the Wi-Fi Manager:Wi-Fi StatusThis page shows the current connection status and link information.SettingThis page allows you to dene settings for establishing a device-to-device wireless connection as well as power saving settings.NOTE: We recommend to set the Power Save to Enable.
71IP InfoThis page shows the network information and provides a way to get the new IP address from the DHCP server.The Renew button enables you to request the DHCP server for a new IP address. This function would take several seconds to get the new IP address.This Ping button serves as the network’s diagnostic tool. It enables you to detect if your device is connected to the network.Site SurveyThis page shows the nearest available wireless network.Each wireless network is preceded by an icon for easy identication. The network channel, ESSID, RSSI, and BSSID are also displayed in columns.
72Your P527 allows you to connect via General Packet Radio Service (GPRS). GPRS is a wireless communication standard that runs at speeds of up to 115 kbps, compared to 9.6 kbps of the current Global System for Mobile Communications (GSM). It supports a wide range of bandwidths that allows sending and receiving small bursts of data, such as email and web browsing. To set a GPRS connection in your device:Setting a GPRS connection1. From the Today screen, tap on the status bar.2. Tap Settings on the message prompt.3. From the Settings screen, select the Connections tab then tap Connections icon.Pop-up callout
734. From the Connections screen, tap Add a new modem connection.5. Input a unique name for the connection then select Cellular Line (GPRS) from the modem list.
746. Input the Access point name.7. Input your user name, password, and domain then tap Finish. Contact your network administrator for assistance. NOTE: The GPRS and USB connections can not be used at the same time.
75Connecting GPRSTo connect GPRS:1. Tap Start > Settings > Connections tab then tap Connections icon.2. From the Connections screen, tap Manage existing connections.3. Tap and hold on an existing connection then from the pop-up menu tap Connect. Tap Delete if you want to delete selected connection setting.4. When connected, tap to exit.NOTE: • When WLAN is used simultaneously with the GPRS, the latter will get signal priority. We recommend not to use WLAN and GPRS at the same time.
76Disconnecting GPRSTo disconnect GPRS:1. Tap from the status bar.2. From the pop-up callout, tap Disconnect.If you have set a default GPRS connection, it automatically connects when you launch an application that connects to the Internet.1. Launch any application that connects to the Internet (e.g. Internet Explorer). The device will automatically connect your default GPRS connection. A pop-up callout appears to display the connection status.2. When connected, you can start browsing the Internet. If you are using Internet Explorer, the default site will be displayed.Pop-up calloutNOTE: • If your ActiveSync is set to sync with Exchange Server automatically, synchronization will occur after you connect again. • GPRS will automatically reconnect everytime you launch an application that requires GPRS connection (e.g., Internet Explorer or Pocket MSN).
77Using the GPRS ToolThe GPRS Tool allows you to conveniently select and connect to your GPRS service provider.To connect via GPRS Tool:1. Tap Start > Settings > Connections tab then tap the Network Setting icon. You can also tap on the status bar then tap Settings from the pop-up callout.2. From the Network Setting screen, select your GPRS provider from the list.NOTE: • Operators vary in different regions. • The GPRS and USB connections cannot be used at the same time.
78GPS featuresChapter• GPS Catcher• Travelog• Location Courier• External GPS5
79The GPS Catcher allows you to download the GPS data so that the GPS data in your device is up-to-date. The GPS data contains important information about the status of satellite, current date and time for determining the satellite position. Updating GPS dataTo update GPS data:GPS Catcher1. Tap Start > Programs > GPS Catcher. 2. Connect your device to PC with the USB cable. Then tap Update. The update process starts.NOTE: To make a successful update, make sure ActiveSync 4.5 is installed in your PC and your PC is connected to the Internet.
803. Tap when nished.Setting GPS CatcherTo set GPS Catcher:1. From the GPS Catcher screen, tap Menu > Setting.NOTE: The expiration of GPS data is three days. You need to update it when it is expired. You can also set GPS Catcher to update automatically, refer to the following section Setting GPS Catcher.2. Check the options at your preference. Tap when nished.
81TravelogRecord buttonThe Travelog allows you to record your travel track and export it to show on Google Earth. Turning on GPS To turn on GPS:1. Tap Start > Programs > Travelog > Menu.1. Physical distance2. Scale3. Zoom in button4. Zoom out button5. Current time6. Status bar1123 4562. Tap Turn On GPS. Then the device starts searching for GPS signal.Pause button
82Recording Travel TrackTo record travel track: 1. Tap Start > Programs > Travelog > Menu > New Route. Enter a name for the route. If you want to record the check point, check the Record Check Point box and set an interval. Refer to GPS setting in Setting Travelog section for details about setting GPS and power saving.2. Tap Start to begin recording your travel track. Tap Pause/Resume to pause or resume recording.Waiting for GPS signal Recording
83While recording, you can view related status from the Status bar. • When the Status bar shows current GPS position in Longitude/Latitude format, tap the bar to display the GPS Status screen. • When the Status bar shows trip distance and the time elapsed, tap the bar to display the Speed screen. • When the Status bar shows speed, elevation and direction, tap the bar to display the Compass. • When the Status bar shows the number of POI and check point, tap the bar to display the GPS Status screen.Tap to display CompassTap to Zoom in Tap to Zoom outTap to view statusTap to pause or resume recording Tap to display the menu
843. Tap Menu > Stop to stop recording. The tracking records are saved in My Favorite. • New POI: Tap to create a new POI. Refer to the following section Creating a New POI for details.• My Favorite: Managing all the trip or/and POI data. This function is disabled while recording a trip.• Pause: Tap to suspend recording a trip. GPS is still on in this mode. • Stop: Tap to stop recording a trip and turn GPS off.
85Exporting RouteYou can export your trip route into KMZ le and load it on Google Earth. To export a route:1. From the Track screen, tap Menu > My Favorite. To export a route:2. From the route list, select a route and tap Export button. 3. Edit the route name and select the destination folder and storage place. Then tap Next. You can also set export settings. Refer to the Export Setting item in the Travelog Setting section for details.
864. When exporting, you can tap Cancel to stop exporting. 5. When nished, tap on the pop-up notication.The display modes of routes on Google Earth vary from the output mode and enhanced presentation mode you set in Export Setting. See the examples on the next page.
87Normal Mode Speed Mode without 2-D PresentationSpeed Mode with 3-D Presentation
88Creating a New POI During recording travel track, you can create a new Point of Interest (POI) in current position.To create a new POI: 1. From the Track screen, tap Menu > New POI.2. In the Info tab, you can edit the name of the POI, change the icon, and add up to three pictures for the POI.3. In the Content tab, you can add description to the POI. You can also change the text font and color in the Advanced Edit.4. Tap when nished. NOTE: The New POI function is disabled when GPS is off.
89NOTE: Refer to the section External GPS for details.Travelog SettingGPS SettingGPS Setting allows you to set GPS mode and power saving mode while using GPS. To set GPS and power saving:2. Current GPS setting is showed. You can tap GPS Hardware Setting to change the settings.3. Tap Power Saving Setting. Check the options and set values at your preference. 4. Tap when nished.1. From Track screen, tap Menu > Setting > GPS Setting.
901. From Track screen, tap Menu > Setting > System Setting.2. Set the unit display style, backlight mode, and speed limit. System SettingSystem Setting allows you to set the unit display style, backlight, and speed limit warning. To set up the system setting:3. Tap when nished.
911. From the Track screen, tap Menu > Setting > Export Setting > Point Setting.2. Tap the tabs of points at the bottom of the screen to set each point. Tap Change to change an icon.Export SettingExport Setting includes Point Setting and Mode Setting.• Point Setting Point Setting allows you to change name and icon of start/end point, check point (milestone point), and POI point. You can also set marking-information label for the points. To set Point Setting: 3. Tap when nished.
92• Mode Setting Mode Setting allows you to set the presentation features of exported data, such as digit range, line color and size. You can also set the size and display effect of exported data.To set Mode Setting:1. From Track screen, tap Menu > Setting > Export Setting > Mode Setting.2. Tap the name of mode to launch detailed mode setting. Choose color and size for line.3. Tap when nished.Line size previewTap to launch color palette
93Hotkey SettingThis function allows you to assign hotkeys and apply functions conveniently while running Travelog.To assign hotkeys:1. From the Track screen, tap Menu > Setting > Hotkey Setting.2. Tap when the tips pop up. If you do not want it show next time, check the Don’t show tips box.
943. From the drop-down menu, choose functions that you want to assign to the keys. Tap Next to continue.3. From the drop-down menu, choose functions that you want to assign to the keys. Tap when nished. You can also tap Reset button to restore the settings to default.Keys DescriptionLeft key Push the navigation key leftward.Right key Push the navigation key rightward.Up key Push the navigation key upward.Down key Push the navigation key downward.Center key Press the navigation key down.
95AboutYou can view version and copyright information of the Travelog application. Reset AllThis function allows you to reset all settings in Travelog to default, and x and recover database.To reset settings and recovery database :1. From the Setting dialog, tap Reset All button. 2. Tap Repair button to x and recover the database. Tap Reset All button to reset all settings to default. Then tap Yes from the pop-up window to conrm. Check the Erase the database box if you want to clear all the database. To view Travelog version and copyright: From the Track screen, tap Menu > Setting > About.
96Location CourierThe Location Courier allows you to send your position through SMS messages to up to ve receivers at the same time. You can also set a timer to send SMS messages periodically.Using Location CourierTo use Location Courier:1. Tap Start > Programs > Location Courier. 2. Tap Menu > Setting to edit message content and set Location Courier properties.NOTE: The GPS automatically turns on when you launch Location Courier application.
973. Enter the number which you want to send the SMS to. Tap Add button to add a contact from the Contacts list.4. Tap Contents tab then enter message.5. Tap Options tab then check your desired properties. 6. Tap SMS Sending Rule tab then select time interval and check your desired properties. Tap to nish setting.
987. The message and receivers you set appear on the Location Courier screen. Tap Start to get and send the location information through SMS. You can also turn on/off GPS or exit the Location Courier application from Menu.Receivers listMessage content Stop button GPS statusLocation Courier statusTap to display menuA message appears. It noties that your SMS message was sent successfully and when the next SMS message will be sent.While running Location Courier, you can view GPS status from the task bar of Today screen. You can tap the status icon to open Location Courier screen.Active (Red)Waiting (Lime)DeActive (Gray)
99P527 allows you to use an external GPS device to receive GPS data. To use an external device, you need to set connection between P527 and your external GPS device.Setting external GPS deviceTo set an external GPS device:External GPS1. Tap Start > Settings > System tab > External GPS.2. From the Programs tab, select a program port.NOTE: The other GPS application in P527 will use the same COM Port as you set here. Ensure that this port is also available in the other GPS applications.
1003. From the Hardware tab, specify a hardware port and baud rate for your external GPS device to use. Refer to the user guide of your external GPS device for details.4. From the Access tab, check the Manage GPS automatically (recommended) check box. NOTE: If you clear this check box, some GPS ralted application in P527 may not be able to obtain GPS data.

Navigation menu