ASUSTeK Computer RTAC56U Dual-band Wireless-AC1200 Gigabit Router User Manual

ASUSTeK Computer Inc Dual-band Wireless-AC1200 Gigabit Router

Contents

User Manual

313.  Select the access rights that you want to assign to the clients accessing your shared data.4.  Create your domain name via the ASUS DDNS services, select I will use the service and accept the Terms of service and key in your domain name. When done, click Next.
325.  Click Finish to finish the setup.6.  To access the FTP site that you created, launch a web browser or a third-party FTP client utility and key in the ftp link  (ftp://<domain name>) you have previously created.
33Using the Servers Center serviceYour wireless router allows UPnP (Universal Plug and Play) multimedia devices, such as PS3 and XBox 360, to access multimedia files from the USB disk connected to your wireless router.NOTE: Before using the UPnP Media Server function, install a wireless adapter on your UPnP device.To use your router as a Servers center:1.  Click USB Extension from the navigation menu at the left side of your screen.2.  Select Servers Center. Your wireless router is now ready to share the media files stored in the USB disk.
34Using the Network Place (Samba) Share serviceNetwork Place (Samba) Share allows you to set the account and permission for samba service.To use Samba share:1.  Click the Network place (Samba) Share tab in the Servers Center of USB Extension.2.  Click Add, Delete or Modify to add, delete or modify the account. Click Apply when done.
35Using the FTP Share serviceSharing files via the FTP serverThe ASUS Wireless Router enables you to share files from your USB storage device via the FTP server with computers in LAN or through the Internet.IMPORTANT!  To use this feature, you need to insert a USB storage device, such as a USB hard disk or USB  flash drive, to the USB 3.0/2.0 port on the rear panel of your wireless router. Ensure that the USB storage device is formatted and partitioned properly. Refer to the ASUS website at  http://event.asus.com/2009/networks/disksupport/ for the file system support table.NOTE:  Ensure that you safely remove the USB disk. Incorrect removal of the USB disk may cause data corruption.To share files via the FTP server:1.  Ensure that you have set up your FTP server through AiDisk.2.  Enable the DDNS service for FTP server access. To do this, follow these steps:  a.   From the navigation menu, click Advanced > WAN > DDNS tab.  b.  In the Enable the DDNS Client? field, tick Yes.  c.   Key in your User Name or E-mail Address and Password or DDNS key.  d.   Key in your Host name. The format should be  xxx.asuscomm.com, where xxx is your host name.  e. When done, click Apply.3.  From the navigation menu, click USB Extension > Servers Center > FTP Share tab and select the account that you want to assign access rights to.
364.  From the list of files/folders, select the type of access rights that you want to assign for specific files/folders:  •   R/W: Select this option to assign read/write access for a specific file/folder.  •   W: Select this option to assign write only access for a specific file/folder.  •   R: Select this option to assign read only access for a specific file/folder.  •    No: Select this option if you do not want to share a specific file/folder.5.  Click Apply to apply the changes.6.  To access the FTP server, key in the ftp link  ftp://<hostname>.asuscomm.com and your user name and password on a web browser or a third-party FTP utility.
37Using the Miscellaneous settingMiscellaneous setting allows you to configure other settings for the USB disk, including maximum login user, device name, work group and language on FTP server.To use miscellaneous setting:1.  Click the Miscellaneous setting tab in the Servers Center of USB Extension.2.  Follow the instruction to key in the necessary information.3.  When finish, click Apply.
38Configuring the Advanced settingsAdvanced Setting allows you to configure the advanced features of your wireless router.Setting up the DHCP ServerYou may enable the DHCP Server function in your wireless router so your network clients can automatically obtain IP addresses from your wireless router.NOTE:  The ASUS Wireless Router can support up to 253 IP addresses for your network.To set up the DHCP server:1.  Click Advanced Setting from the navigation menu at the left side of your screen.2.  Under the LAN menu, click DHCP Server.
393.  In the Enable the DHCP Server? field, tick Yes.4.  In the IP Pool Starting Address field, key in the starting IP address.5.  In the IP Pool Ending Address field, key in the ending IP address.6.  In the Lease Time field, key in the time that the IP addresses expire and the wireless router automatically assigns new IP Addresses for the network clients. IMPORTANT!•  For the IP Pool Starting and Ending IP addresses, we recommend that you use:  •    IP address: 192.168.1.xxx (xxx can be any number between 2 and 254)•  IP Pool Starting Address should not be greater than the IP Pool Ending Address.
40To upgrade the firmware:1.  Click Advanced Setting from the navigation menu at the left side of your screen. 2.  Under the Administration menu, click Firmware Upgrade.3.  In the New Firmware File field, click Browse to locate the new firmware in your computer.4.  Click Upload. The uploading process takes about three minutes.Upgrading the firmwareNOTE:  Download the latest firmware from the ASUS website at http://www.asus.comNOTE:  If the upgrade process fails, the wireless router automatically enters the rescue mode and the power LED indicator at the front panel flashes slowly. To recover or restore the system, use the Firmware Restoration utility. RT-AC56U
41Restoring/Saving/Uploading settingsTo restore/save/upload the settings:1.  Click Advanced Setting from the navigation menu at the left side of your screen. 2.  Under the Administration menu, click Restore/Save/Upload Setting.3.  Select the tasks that you want to do:  •   To restore to the default factory settings, click Restore, and click OK in the confirmation message.  •   To save the current system settings, click Save, and click Save in the file download window to save the system file in your preferred path.  •   To restore previous system settings, click Browse to locate the system file that you want to restore, then click Upload.
42Setting up your network printerUse the Network Printer Setup utility to set up a USB printer on your wireless router and allow network clients to access the USB printer.NOTES:•  To check if your USB printer is compatible with your ASUS wireless router, refer to the Printer Support List at  http://event.asus.com/2009/networks/printersupport/RT-AC56U.htm•  The wireless router's printer server function is not supported on Windows® 2000.To set up your USB Printer:1.  Click USB Extension from the navigation menu at the left side of your screen, then click Network Printer Server.2.  Click Download Now! in the ASUS EZ printer sharing mode to download the network printer utility.
434.  Follow the onscreen instructions to set up your hardware, then click Next.USBLAN3.  Unzip the downloaded file and click the Printer icon to run the network printer setup program.
445.  Wait for a few minutes for the initial setup to finish. Click Next.6.  Click Finish to complete the installation. RT-AC56U
458.  After the printer’s driver installation is completed, network clients can now use the printer.7.  Follow the Windows® OS instructions to install the printer driver.
464  Using the utilitiesNOTES: •  Install the wireless router's utilities from the bundled support CD. •  If Autorun is disabled, run setup.exe from the root directory of the support CD.Device DiscoveryDevice Discovery is an ASUS WLAN utility that detects an ASUS wireless router device, and enables you to configure the device.To launch the Device Discovery utility:•  From your computer’s desktop, click  Start > All Programs > ASUS Utility > RT-AC56U Wireless Router > Device Discovery.55NOTE:  When you set the router to Access Point mode, you need to use Device Discovery to get the router’s IP address.
47Firmware RestorationFirmware Restoration is used on an ASUS Wireless Router that failed during its firmware upgrading process. It uploads the firmware that you specify. The process takes about three to four minutes.TolaunchtherescuemodeandusetheFirmwareRestoration utility:1.  Unplug the wireless router from the power source.2.  Hold the Reset button at the rear panel and simultaneously re-plug the wireless router into the power source. Release the Reset button when the Power LED at the front panel flashes slowly, which indicates that the wireless router is in the rescue mode.3.  Use the following to set up your TCP/IP settings: IP address: 192.168.1.x Subnet mask: 255.255.255.04.  From your computer’s desktop, click  Start > All Programs > ASUS Utility RT-AC56U Wireless Router > Firmware Restoration.IMPORTANT: Launch the rescue mode before using the Firmware Restoration utility.
48NOTE:   This is not a firmware upgrade utility and cannot be used on a working ASUS Wireless Router. Normal firmware upgrades must be done through the web interface. Refer to Chapter 3: Configuring via the web GUI for more details.5.  Specify a firmware file, then click Upload.
495  TroubleshootingNOTE:  If you encounter problems that are not mentioned in this chapter, contact the ASUS Technical Support.TroubleshootingIcannotaccessawebbrowserforconguringtherouter.•  Delete the cookies and files in your web browser. To do this, follow these steps:  1.   Launch your web browser, then click Tools > Internet Options...  2.   Under Temporary Internet files, click Delete Cookies... and Delete Files...NOTE:  The commands for deleting cookies and files vary with the web browser.•  Disable the proxy server settings, cancel the dial-up connection, and set the TCP/IP settings to obtain IP addresses automatically. For more details, refer to the section Before you proceed in this user manual.Theclientcannotestablishawirelessconnectionwiththerouter.Out of Range:  •  Put the router closer to the wireless client.  •  Try to change the channel settings.Authentication:  •  Use wired connection to connect to the router.  •  Check the wireless security settings.  •   Press the Reset button at the rear panel for more than five seconds.
50Cannot find the router:  •   Press the Reset button at the rear panel for more than five seconds.  •   Check the setting in the wireless adapter such as SSID and encryption settings.CannotaccesstheInternetviawirelessLANadapter.•  Move the router closer to the wireless client.•  Check whether the wireless adapter is connected to the correct wireless router.•  Check whether the wireless channel in use conforms to the channels available in your country/area.•  Check the encryption settings.•  Check if the ADSL or Cable connection is correct.•  Retry using another Ethernet cable.Internetisnotaccessible.•  Check the status indicators on the ADSL modem and the wireless router.•  Check if the WAN LED on the wireless router is ON. If the LED is not ON, change the cable and try again.WhenADSLModem“Link”lightisON(notblinking),thismeansInternetAccessispossible.•  Restart your computer.•  Refer to the Quick Start Guide of the wireless router and re-configure the settings.•  Check if the WAN LED on the wireless router is ON.•  Check the wireless encryption settings.•  Check if the computer can get the IP address (via both wired network and wireless network).•  Ensure that your web browser is configured to use the local LAN, and is not configured to use a proxy server.
51IftheADSL“LINK”lightblinkscontinuouslyorstaysoff,Internetaccessisnotpossible-theRouterisunabletoestablishaconnectionwiththeADSLnetwork.•  Ensure that all your cables are all properly connected .•  Disconnect the power cord from the ADSL or cable modem, wait a few minutes, then reconnect the cord.•  If the ADSL light continues to blink or stays OFF, contact your ADSL service provider.Networknameorencryptionkeysareforgotten.•  Try setting up the wired connection and configuring the wireless encryption again. •  Press the Reset button at the rear panel of the wireless router for more than five seconds.Howtorestorethesystemtoitsdefaultsettings?•  Press the Reset button at the rear panel of the wireless router for more than five seconds.•  Refer to the section Restoring/Saving/Uploading settings in Chapter 3 of this user manual.  The following are the factory default settings:    User Name:  admin     Password:  admin    Enable DHCP:   Yes (if WAN cable is plugged in)    IP address:   192.168.1.1    Domain Name:   (Blank)    Subnet Mask:   255.255.255.0    DNS Server 1:  192.168.1.1    DNS Server 2:   (Blank)    SSID (2.4GHz):  ASUS    SSID (5GHz):  ASUS_5G
52ASUS DDNS ServiceRT-AC56U supports the ASUS DDNS service. When exchanging devices at the service center, if you have registered the ASUS DDNS service and want to keep the original domain name, data transfer is a must. Visit your local service center for more information.NOTES:•  If there is no activity in the domain - such as reconfiguring the router or accessing the registered domain name - within 90 days, the system automatically deletes the registered information. •  If you encounter any problem or difficulty in using your device, contact the service center.Frequently Asked Questions (FAQs)1.  Will the registered information be lost or registered by others?  If you have not updated the registered information in 90 days, the system automatically deletes the registered information and the domain name may be registered by others.2.  I did not register the ASUS DDNS for the router I bought six months ago. Can I still register it?  Yes, you can still register the ASUS DDNS service for your router. The DDNS service is embedded in your router, so you can register the ASUS DDNS service anytime. Before registering, click Query to check if the hostname has been registered or not. If not, the system registers the hostname automatically.
533.  I have registered a domain name before and it has been working well until my friends told me that they could not access my domain name.  Check the following:    1.   The internet is working well.    2.   The DNS server is working well.    3.   The last time you updated the domain name.  If there are still problems in accessing your domain name, contact the service center.4.  Can I register two domain names to separately access my http and ftp servers?  No, you cannot. You can only register one domain name for one router. Use port mapping to implement security in the network.5.  After restarting the router, why is it that I see different WAN IPs in MS DOS and in the router configuration page?  This is normal. The interval time between the ISP DNS server and ASUS DDNS results in different WAN IPs in MS DOS and in the router configuration page. Different ISPs may have different interval time for IP updating.6.  Is the ASUS DDNS service free, or is it just a trial version?  The ASUS DDNS service is a free and embedded service in some ASUS routers. Check your ASUS router if it supports the ASUS DDNS service.
54AppendicesNoticesASUS Recycling/Takeback ServicesASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for the detailed recycling information in different regions.REACHComplying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website athttp://csr.asus.com/english/index.aspxFederal Communications Commission StatementThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: •  This device may not cause harmful interference.•  This device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
55Prohibition of Co-locationThis device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitterCaution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.IMPORTANT!  This device within the 5.15 ~ 5.25 GHz is restricted to indoor operations to reduce any potential for harmful interference to co-channel MSS operations.against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:•  Reorient or relocate the receiving antenna.•  Increase the separation between the equipment and receiver.•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.•  Consult the dealer or an experienced radio/TV technician for help.
56Safety InformationTo maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna.Declaration of Conformity for R&TTE directive 1999/5/ECEssential requirements – Article 3Protection requirements for health and safety – Article 3.1aTesting for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient.Protection requirements for electromagnetic compatibility – Article 3.1bTesting for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient.Effective use of the radio spectrum – Article 3.2Testing for radio test suites according to EN 300 328 & EN 301 893 have been conducted. These are considered relevant and sufficient.Operate the device in 5150-5250 MHz frequency band for indoor use only. CE Mark WarningThis is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
FCC Notices  This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  CAUTION: Change or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.           This  equipment  has  been  tested  and  found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.  CAUTION: Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.    RF exposure warning: The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.  The equipment must not be co-located or operating in conjunction with any other antenna or transmitter.
 Canada Notices Industry Canada regulatory information  Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.  The user is cautioned that this device should be used only as specified within this manual to meet RF exposure requirements.  Use of this device in a manner inconsistent with this manual could lead to excessive RF exposure conditions.
57Canada, Industry Canada (IC) NoticesThis Class B digital apparatus complies with Canadian ICES-003 and RSS-210.Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Radio Frequency (RF) Exposure InformationThe radiated output power of the Dell Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The Dell Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.This device has been evaluated for and shown compliant with the IC Specific Absorption Rate (“SAR”) limits when installed in specific host products operated in portable exposure conditions (antennas are less than 20 centimeters of a person’s body).This device has been certified for use in Canada. Status of the listing in the Industry Canada’s REL (Radio Equipment List) can be found at the following web address:  http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.do?lang=engAdditional Canadian information on RF exposure also can be found at the following web: http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.htmlCanada, avis d’Industry Canada (IC)Cet appareil numérique de classe B est conforme aux normes
58canadiennes ICES-003 et RSS-210.Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent a ecter son fonctionnement.NCC 警語經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。GNU General Public LicenseLicensing informationThis product includes copyrighted third-party software licensed under the terms of the GNU General Public License. Please see The GNU General Public License for the exact terms and conditions of this license. We include a copy of the GPL with every CD shipped with our product. All future firmware updates will also be accompanied with their respective source code. Please visit our web site for updated information. Note that we do not offer direct support for the distribution.GNU GENERAL PUBLIC LICENSEVersion 2, June 1991Copyright (C) 1989, 1991 Free Software Foundation, Inc.59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
59Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.PreambleThe licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too.When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things.To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it.For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know
60We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software.Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors’ reputations.Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free use or not licensed at all.The precise terms and conditions for copying, distribution and modification follow.Terms&conditionsforcopying,distribution,&modication0.  This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The “Program”, below, refers to any such program or work, and a “work based on the Program” means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is addressed as “you”.  Activities other than copying, distribution and modification are
61not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.1.   You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.  You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.2.  You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions:  a)  You must cause the modified files to carry prominent notices stating that   you changed the files and the date of any change.  b)  You must cause any work that you distribute or publish, that in whole or in   part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.  c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute
62the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)  These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.  Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program.  In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.3.  You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following:  a)  Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,  b)  Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your
63cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,c)  Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)  The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable.  If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.4.  You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.5.  You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License.
64Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.6.  Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.7.  If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program.  If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances.  It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance
65on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice.  This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.8.  If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.9.  The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.  Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and “any later version”, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission.  For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
66derivatives of our free software and of promoting the sharing and reuse of software generally.NOWARRANTY11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.END OF TERMS AND CONDITIONS
67ASUS Contact informationASUSTeK COMPUTER INC. (Asia Pacific)Address  15 Li-Te Road, Peitou, Taipei, Taiwan 11259Website  www.asus.com.twTechnical SupportTelephone  +886228943447Support Fax  +886228907698Online support  support.asus.comASUS COMPUTER INTERNATIONAL (America)Address  800 Corporate Way, Fremont, CA 94539, USATelephone  +15107393777Fax   +15106084555Website  usa.asus.comOnline support  support.asus.comASUS COMPUTER GmbH (Germany and Austria)Address  Harkort Str. 21-23, D-40880 Ratingen, GermanyTelephone  +491805010923*Fax   +492102959911Website  www.asus.deOnline contact  www.asus.de/salesTechnical SupportTelephone (Component, Networking)  +491805010923*Telephone (System/Notebook/Eee/LCD)  +491805010920*Fax         +492102959911Online support        support.asus.com* EUR 0.14/minute from a German xed landline; EUR 0.42/minute from a mobile phone.
68Area Hotline Number Support  Languages Working Hour Working DayAustralia  1300-2787-88  English 8:00-20:00 Mon. to Fri.Austria  0043-820240513 German  9:00-18:00 Mon. to Fri.Belgium 0032-78150231 Dutch /French 9:00-17:00 Mon. to Fri.China 400-620-6655 Simplified Chinese  9:00-18:00 Mon. to Sun.Denmark 0045-3832-2943 Denish/English 9:00-17:00 Mon. to Fri.Finland 00358-9693-7969 Finnish/English/Swedish 10:00-18:00 Mon. to Fri.France 0033-170949400 France 9:00-17:45 Mon. to Fri.Greece 00800-44-14-20-44 Greek 9:00-13:00; 14:00-18:00 Mon. to Fri.Hong Kong 3582-4770 Cantonese/ Chinese/ English10:00-20:00 Mon. to Fri.10:00-17:00 Sat.Ireland 0035-31890719918 English 9:00-17:00 Mon. to Fri.Japan 0800-123-2787  Japanese 9:00-18:00  Mon. to Fri.9:00-17:00  Sat. to Sun.Malaysia+603 2148 0827 (Check Repair Detail Status Only)+603-6279-5077Bahasa Melayu/English 10:00-19:00  Mon. to Fri.Netherlands  / Luxembourg 0031-591-570290 Dutch / English 9:00-17:00 Mon. to Fri.New Zealand 0800-278-788 / 0800-278-778  English 9:00-17:00 Mon. to Fri.Norway 0047-2316-2682 Norwegian /English 9:00-17:00 Mon. to Fri.Philippine +632-636 8504; 180014410573 English 9:00-18:00  Mon. to Fri.Poland 00225-718-03300225-718-040 Polish 9:00-17:008:30-17:30 Mon. to Fri.Portugal 707-500-310 Portuguese 9:00-17:00 Mon. to Fri.Networks Global Hotline Information
69Area Hotline Number Support  Languages Working Hour Working DayRussia +8-800-100-ASUS; +7-495-231-1999Russian/ English 9:00-18:00 Mon. to Fri.Singapore+65-6720-3835 (Check Repair Detail Status Only)-66221701English 11:00-19:00  Mon. to Fri.Slovak 00421-232-162-621 Czech 8:00-17:00 Mon. to Fri.Spain 902-88-96-88 Spanish 9:00-18:00 Mon. to Fri.Sweden 0046-8587-6940 Swedish/ English 9:00-17:00 Mon. to Fri.Switzerland0041-848111010 German/French 9:00-18:00 Mon. to Fri.0041-848111014 French 9:00-17:45 Mon. to Fri.0041-848111012 Italian 9:00-17:00 Mon. to Fri.Taiwan 0800-093-456; 02-81439000Traditional Chinese 9:00-12:00; 13:30-18:00 Mon. to Fri.Thailand +662-679-8367 -70; 001 800 852 5201 Thai/English 9:00-18:00 Mon. to Fri.Turkey  +90-216-524-3000  Turkish 09:00-18:00 Mon. to FriUnited Kingdom 0044-870-1208340; 0035-31890719918 English 9:00-17:00 Mon. to Fri.USA/Canada 1-812-282-2787 English8:30-12:00am EST(5:30am-9:00pm PST)Mon. to Fri.9:00am-6:00pm EST(6:00am-3:00pm PST)Sat. to Sun.NOTE:  For more information, visit the ASUS support site at: http://support.asus.comNetworks Global Hotline Information
70Manufacturer: ASUSTeK Computer Inc.Tel: +886-2-2894-3447Address: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWANAuthorised representative  in Europe:ASUS Computer GmbHAddress: HARKORT STR. 21-23, 40880 RATINGEN, GERMANYAuthorised distributors  in Turkey:BOGAZICI BIL GISAYAR SAN. VE TIC. A.S.Tel: +90 212 3311000Address: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBULCIZGI Elektronik San. Tic. Ltd. Sti.Tel: +90 212 3567070Address: CEMAL SURURI CD. HALIM MERIC IS MERKEZI No: 15/C D:5-6 34394 MECIDIYEKOY/ISTANBULEEE Yönetmeliğine Uygundur.

Navigation menu