ASUSTeK Computer RTN13U WIRELESS N ROUTER WITH ALL-IN-ONE PRINTER SERVER User Manual 1
ASUSTeK Computer Inc WIRELESS N ROUTER WITH ALL-IN-ONE PRINTER SERVER Users Manual 1
Contents
- 1. Users Manual 1
- 2. Users Manual 2
- 3. Users Manual 3
- 4. Users Manual 4
Users Manual 1
RT-N13U ASUS Wireless N Router with All-in-One Printer Server User Manual E4713 First Edition V1 May 2009 Copyright © 2009 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”). Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT. Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe. Table of contents About this guide..................................................................................... 4 How this guide is organized............................................................... 4 Conventions used in this guide.......................................................... 5 Chapter 1: Knowing your wireless router Package contents................................................................................... 6 System requirements............................................................................. 6 Before you proceed................................................................................ 6 Hardware features.................................................................................. 7 Front panel......................................................................................... 7 Rear panel.......................................................................................... 8 Bottom panel...................................................................................... 9 Chapter 2: Setting up the hardware Setting up the wireless router............................................................. 10 Setting up a wired connection.......................................................... 10 Setting up a wireless connection.......................................................11 Configuring the wireless router.......................................................... 12 Using the web GUI........................................................................... 12 Chapter 3: Configuring the network clients Accessing the wireless router............................................................. 13 Setting an IP address for wired or wireless client............................ 13 Chapter 4: Configuring via the web GUI Configuring via the web GUI................................................................ 21 Using the Network Map........................................................................ 22 Setting up WAN using the Quick Internet Setup (QIS)..................... 23 Using AiDisk.......................................................................................... 24 Managing EzQoS bandwidth............................................................... 26 Upgrading the firmware....................................................................... 27 Restoring/Saving/Uploading settings................................................. 28 Using the USB application................................................................... 29 Creating a user account................................................................... 29 Setting up an FTP site...................................................................... 30 Table of contents Connecting a USB printer.................................................................... 31 Chapter 5: Installing the utilities Installing the utilities............................................................................ 36 Device Discovery.................................................................................. 38 Firmware Restoration........................................................................... 38 WPS Wizard........................................................................................... 39 Using WPS Wizard........................................................................... 39 Download Master.................................................................................. 45 Using the Download Master............................................................. 45 Chapter 6: Troubleshooting Troubleshooting.................................................................................... 47 ASUS DDNS Service............................................................................. 50 Frequently Asked Questions (FAQs)................................................ 50 Appendices Notices................................................................................................... 52 Federal Communications Commission Statement........................... 52 CE Mark Warning............................................................................. 53 GNU General Public License........................................................... 53 REACH .......................................................................................... 60 ASUS Contact information................................................................... 61 About this guide This user guide contains information that you need to install and configure the ASUS Wireless Router. How this guide is organized This guide contains the following parts: • Chapter 1: Knowing your wireless router This chapter provides information on the package contents, system requirements, hardware features, and LED indicators of the ASUS Wireless Router. • Chapter 2: Setting up the hardware This chapter provides instructions on setting up, accessing, and configuring the ASUS Wireless Router. • Chapter 3: Configuring the network clients This chapter provides instructions on setting up the clients in your network to work with your ASUS Wireless Router. • Chapter 4: Configuring via the web GUI This chapter provides instructions on configuring the ASUS Wireless Router using its web graphics user interface (web GUI). • Chapter 5: Installing the utilities This chapter provides information on the utilities that are available from the support CD. • Chapter 6: Troubleshooting This chapter provides you with a troubleshooting guide for solving common problems you may encounter when using the ASUS Wireless Router. • Appendices This chapter provides you with the regulatory Notices and Safety Statements. Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete a task. NOTE: Tips and additional information to aid in completing a task. 1 Knowing your wireless router Package contents Check the following items in your ASUS Wireless Router package. RT-N13U Wireless Router Power adapter Support CD (manual, utilities) RJ45 cable Quick Start Guide Note: If any of the items is damaged or missing, contact your retailer. System requirements Before installing the ASUS Wireless Router, ensure that your system/network meets the following requirements: • • • An Ethernet RJ-45 port (10Base-T/100Base-TX) At least one IEEE 802.11b/g/n device with wireless capability An installed TCP/IP and Internet browser Before you proceed Take note of the following guidelines before installing the ASUS Wireless Router: • • • • • The length of the Ethernet cable that connects the device to the network (hub, ADSL/cable modem, router, wall patch) must not exceed 100 meters. Place the device on a flat and stable surface as far from the ground as possible. Keep the device clear from metal obstructions and away from direct sunlight. Keep the device away from transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, and other industrial equipment to prevent signal loss. Install the device in a central area to provide ideal coverage for all wireless mobile devices. RT-N13U Chapter 1: Knowing your wireless router • Install the device at least 20cm from a person to insure that the product is operated in accordance with the RF Guidelines for Human Exposure adopted by the Federal Communications Commission. Hardware features Front panel Status indicators LED (Power) (Wireless) LAN 1-4 (Local Area Network) (Internet) Status Indication Off No power On System ready Flashing-slow Rescue mode Flashing-quick WPS processing Off No power On Wireless system ready Flashing Transmitting or receiving data (wireless) Off No power or no physical connection On Has physical connection to an Ethernet network Flashing Transmitting or receiving data (through Ethernet cable) Off No power or no physical connection On Has physical connection to an Ethernet network Flashing Transmitting or receiving data (through Ethernet cable) Chapter 1: Knowing your wireless router RT-N13U Buttons Button (WPS) Indication This button launches the WPS wizard. Rear panel Label Description Internet Connect an RJ-45 Ethernet cable to this port to establish WAN connection. LAN1-LAN4 Connect RJ-45 Ethernet cables to these ports to establish LAN connection. USB 2.0 Insert USB 2.0 devices such as USB hard disks and USB flash drives (at least 2GB capacity) into these ports. Power Insert the AC adapter into this port to connect your router to a power source. RT-N13U Chapter 1: Knowing your wireless router Bottom panel Item Description Restore button Press this button to restore the system to its factory default settings. Operation mode selector Use this selector to choose an operation mode: Router (IP Sharing mode): In this mode, RT-N13U connects to WAN (Internet) by PPPoE, Automatic IP, or Static IP, and provides wireless radio, NAT, firewall, and IP sharing services in LAN. Repeater: In this mode, RT-N13U extends your wireless network and provides higher quality wireless radio to users. NAT, firewall, and IP sharing services are disabled automatically. AP (Access Point): In this mode, RT-N13U receives the WAN IP address from the router connected to the WAN port and provides wireless radio to users. NAT, firewall, and IP sharing services are disabled automatically. Chapter 1: Knowing your wireless router RT-N13U 2 Setting up the hardware Setting up the wireless router The ASUS Wireless Router meets various working scenarios with proper configurations. You may need to change the wireless router’s default settings so as to meet the requirements in your wireless environment. It also provides you with WPS, a utility that enables you to easily set up a secure wireless network. Notes: • We recommend that you use wired connection for initial configuration to avoid possible setup problems due to wireless uncertainty. • For more details on WPS, refer to the section WPS Wizard in Chapter 5 of this user manual. Setting up a wired connection The ASUS Wireless Router is supplied with an Ethernet cable in the package. The wireless router has integrated auto-crossover function, so use either straightthrough or crossover cable for wired connection. To set up the wired connection: 1. Turn on your router and the modem. 2. Using an Ethernet cable, connect the router’s Internet port to the modem. 3. Using another Ethernet cable, connect the router’s LAN port to your PC’s LAN port. 10 RT-N13U Chapter 2: Setting up the hardware Setting up a wireless connection To set up a wireless connection: 1. Turn on your router and the modem. 2. Using an Ethernet cable, connect the modem to the router’s Internet port. 3. Connect an IEEE 802.11b/g/n compatible WLAN adapter. Refer ����������������������� to your wireless adapter user manual for wireless connection procedures. By default, the SSID of ASUS Wireless Router is “ASUS” (in upper case), encryption is disabled and open system authentication is used. Chapter 2: Setting up the hardware RT-N13U 11 Configuring the wireless router The ASUS Wireless Router includes a web graphics user interface (web GUI) that allows you to configure the wireless router using your web browser on your computer. Using the web GUI If your PC connects to the router using a cable, launch your web browser and the login page of the router’s web GUI automatically launches. If your PC connects to the router wirelessly, you have to select the network first. To select the network: 1. Click Start > Control Panel > Network Connections > Wireless Network Connection. 2. Select a network from the Choose a wireless network window. Wait for it to connect. Note: By default, the SSID of wireless router is ASUS. Connect to this default SSID. 3. After establishing a wireless connection, launch a web browser. Notes: • You may also manually key in the router's default IP address (192.168.1.1) to launch the router's web interface. • For more details on configuring your wireless router using the web GUI, refer to Chapter 4: Configuring via the web GUI. 12 RT-N13U Chapter 2: Setting up the hardware 3 Configuring the network clients Accessing the wireless router Setting an IP address for wired or wireless client To access the ASUS Wireless Router, you must have the correct TCP/IP settings on your wired or wireless clients. Ensure that the clients’ IP addresses are within the same subnet as the ASUS Wireless Router. By default, the ASUS Wireless Router integrates the DHCP server function, which automatically assigns IP addresses to the clients in your network. But in some instances, you may want to manually assign static IP addresses on some of the clients or computers in your network rather than automatically getting IP addresses from your wireless router. Follow the instructions below that correspond to the operating system installed on your client or computer. Note: If you want to manually assign an IP address to your client, we recommend that you use the following settings: • IP address: 192.168.1.xxx (xxx can be any number between 2 and 254. Ensure that the IP address is not used by another device) • Subnet Mask: 255.255.255.0 (same as the ASUS Wireless Router) • Gateway: 192.168.1.1 (IP address of the ASUS Wireless Router) • DNS: 192.168.1.1 (ASUS Wireless Router) or assign a known DNS server in your network Chapter 3: Configuring the clients RT-N13U 13 Windows® 9x/ME 1. Click Start > Control Panel > Network to display the Network setup window. 2. Select TCP/IP then click Properties. 3. If you want your computer to automatically obtain an IP address, click Obtain an IP address automatically then click OK. Otherwise, click Specify an IP address, then key in the IP address and Subnet Mask. 14 RT-N13U Chapter 3: Configuring the clients 4. Select the Gateway tab, and key in New gateway then click Add. 5. Select the DNS configuration tab and click Enable DNS. Key in Host, Domain, and DNS Server Search Order, then click Add. 6. Click OK. Chapter 3: Configuring the clients RT-N13U 15 Windows® NT4.0 1. Go to Control Panel > Network to display the Network setup window then select the Protocols tab. 2. Select TCP/IP Protocol from the Network Protocols list then click Properties. 3. From the IP Address tab of the Microsoft TCP/IP Properties window, you can: • Select the type of network adapter installed in your system. • Set the router to assign IP address automatically. • Manually set up the IP address, subnet mask, and default gateway. 16 RT-N13U Chapter 3: Configuring the clients 4. Select the DNS tab then click Add under the DNS Service Search Order and key in DNS. Windows® 2000 1. Click Start > Control Panel > Network and Dial-up Connection. Right-click Local Area Connection then click Properties. Chapter 3: Configuring the clients RT-N13U 17 2. Select Internet Protocol (TCP/IP), then click Properties. 3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway. 4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred and Alternate DNS server. 5. Click OK when done. Windows® XP 1. Click Start > Control Panel > Network Connection. Right-click Local Area Connection then select Properties. 18 RT-N13U Chapter 3: Configuring the clients 2. Select Internet Protocol (TCP/IP), then click Properties. 3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address, Subnet mask, and Default gateway. 4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred and Alternate DNS server. 5. Click OK when done. Chapter 3: Configuring the clients RT-N13U 19 Windows® Vista 1. Go to Start > Control Panel > Network and Internet > Network and Sharing Center. Click View status > Properties > Continue. 2. Select Internet Protocol Version 4 (TCP/IPv4), then click Properties. 3. Select Obtain an IP address automatically if you want the IP settings to be assigned automatically. Otherwise, select Use the following IP address: and key in IP address and Subnet mask. 4. Select Obtain DNS server address automatically if you want the DNS server settings to be assigned automatically. Otherwise, select Use the following DNS server addresses: and key in the Preferred and Alternate DNS server. 5. Click OK when done. 20 RT-N13U Chapter 3: Configuring the clients
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2009:05:18 13:44:30+08:00 Creator : Adobe InDesign CS2 (4.0) Modify Date : 2009:05:18 13:44:39+08:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2009:05:18 13:44:39+08:00 Creator Tool : Adobe InDesign CS2 (4.0) Format : application/pdf Document ID : uuid:e38a5d2d-c29f-46a9-a069-2629fe406b62 Instance ID : uuid:2e9ebef8-bfac-4550-8542-47047ca2e69b Producer : Adobe PDF Library 7.0 Page Count : 20EXIF Metadata provided by EXIF.tools