ASUSTeK Computer Z00D ASUS Phone User Manual Technical Users Manual statement MSQZ00D

ASUSTeK Computer Inc ASUS Phone Technical Users Manual statement MSQZ00D

Contents

Technical-Users Manual (statement)_MSQZ00D

Important Notices
Copyright © 2015 ASUSTeK COMPUTER INC.All Rights Reserved.No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE First EditionJanuary 2015
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identication or explanation and to the owners’ benet, without intent to infringe.
Safety informationASUS Phone care• Do not leave your ASUS Phone exposed to strong sunlight or excessive heat for a prolonged period. This may damage it.• Do not handle your ASUS Phone with wet hands or expose it to moisture or liquids of any kind. Continuous changes from a cold to a warm environment may lead to condensation inside your ASUS Phone, resulting in corrosion and possible damage.• If you pack your ASUS Phone in your suitcase during travel, beware of damage. Cramming the device into a suitcase may crack the LCD display. Remember to switch off your wireless connection during air travel.• Use your ASUS Phone in an environment with ambient temperatures between -10 °C (14 °F) and 35 °C (95 °F).IMPORTANT! To provide electrical insulation and maintain electrical safety, a coating is applied to insulate the ASUS Phone body except on the sides where the I/O ports are located.
The batteryYour ASUS Phone is equipped with a high performance non-detachable Li-Ion battery. Observe the following maintenance guidelines for a longer battery life:• Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.• Do not remove and replace the battery with a non-approved battery.• Do not remove and immerse the battery in water or any other liquid.• Never try to open the battery as it contains substances that might be harmful if swallowed or allowed to come into contact with unprotected skin.• Do not remove and short-circuit the battery, as it may overheat and cause a re. Keep it away from jewellery and other metal objects.• Do not remove and dispose of the battery in re. It could explode and release harmful substances into the environment. • Do not remove and dispose of the battery with your regular household waste. Take it to a hazardous material collection point.
• Do not touch the battery terminals.CAUTION:• Risk of explosion if battery is replaced by an incorrect type.• Dispose of used batteries according to the instructions.The charger• Use only the charger supplied with your ASUS Phone.• Never pull the charger cord to disconnect it from the power socket. Pull the charger itself.Cleaning and storing• Your ASUS Phone should always be handled with care and protected from dirt, dust and dampness. To avoid scratches, never place your ASUS Phone face down.• If cleaning is necessary, turn your ASUS Phone off and wipe carefully with a soft, slightly damp (not wet) cloth. Use a cotton swab to clean the camera lens. Allow your ASUS Phone to dry completely before switching it on. Never use solvents for cleaning.• If you are not going to use your ASUS Phone for some time, fully
charge the battery and store your ASUS Phone in a dry place away from direct sunlight. Your ASUS Phone should be switched off during storage. Recharge every 6 to 12 months.• Never expose your ASUS Phone to heat or strong sunlight.• Never expose your ASUS Phone to moisture or liquids of any kind.• Do not place stickers that may block the keypad or affect other components such as the microphone, earpiece, or camera lens.WARNING! Failure to follow these instructions may lead to serious personal injury and possible property damage.Driving safelyNever use handheld phones while driving. It is an offence, that while driving, to hold a phone or cradle it in your neck at any point, during the setup, making or taking of a phone call, text message or any other data related mobile communication. Use of fully installed car kits are still permitted, as are the use of alternate handsfree accessories.In the interest of safety, we would
recommend the use of a cradle while using any form of handsfree accessory.While driving, we recommend that you use voicemail wherever possible, and that you listen to your messages when you are not in the car. If you must make a handsfree call when driving, keep it brief. Do not place objects, including both installed or portable wireless equipment, in the area over the airbag or in the airbag deployment area. An airbag inates with great force. If the airbag inates, serious injury could result.Electronic devicesMost modern electronic equipment is shielded from RF energy.However, certain electronic equipment may not be shielded against the RF signals from your device.PacemakersThe Health Industry Manufacturers’ Association recommends that a minimum separation of six (6”) inches be maintained between a phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
If you have a pacemaker:• Always keep your ASUS Phone more than six inches (15cm) from your pacemaker when turned on.• Do not carry your ASUS Phone in your breast pocket.• Use the ear opposite the pacemaker to minimize the potential for interference.• If you have any reason to suspect that interference is taking place, switch off your ASUS Phone immediately.Hearing aidsSome digital phones may interfere with some hearing aids. In the event of such interference, call ASUS Customer Service to discuss alternatives. Other medical devicesIf you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.Turn your ASUS Phone off in healthcare facilities when any regulations posted in these areas instruct you to do so.Hospitals or healthcare facilities may be using equipment that could be sensitive to external RF energy.
VehiclesRF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment added to your vehicle.Posted facilitiesTurn your ASUS Phone off where posted notices so require.Magnetic mediaMagnetic elds generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes. Do not place your ASUS Phone next to such media.You should never expose your ASUS Phone to strong magnetic elds as this may cause temporary malfunction.Other Safety GuidelinesAircraftRegulations prohibit using your mobile device while onboard an aircraft. Switch off your ASUS Phone before boarding an aircraft or turn off the wireless connection.
Blasting areasTo avoid interfering with blasting operations, turn your ASUS Phone off when in a ‘blasting area’ or in areas posted: “Turn off two-way radio.” Obey all signs and instructions.Potentially explosive environmentsTurn your ASUS Phone off when in any area with a potentially explosive environment and obey all signs and instructions.Sparks in such areas could cause an explosion or re resulting in bodily injury or even death.Areas with a potentially explosive environment are often, but not always, clearly marked. They include fuelling areas such as gas stations, below decks on boats, fuel or chemical transfer or storage facilities, vehicles using liquied petroleum gas (such as propane or butane), areas where the air contains chemicals or articles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle’s engine.ChokingKeep your ASUS Phone away from children as the SIM card and other small parts present a choking hazard.
CautionYour ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter. • Do not use the ASUS Phone in an extreme environment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between -15 °C (5 °F) and 35 °C (95 °F).• Do not abuse the ASUS Phone. Avoid striking, shaking, or subjecting the device to impact. When not using the unit, place the device in a safe place to avoid damage to the product.• Do not expose the ASUS Phone to rain or moisture.• Do not use unauthorized accessories.• Do not disassemble the ASUS Phone or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or re may result.• Do not short-circuit the battery terminals with metal items.• Avoid dropping the phone or battery. If the phone or battery is dropped, especially on a hard
surface, and the user suspects damage, take it to a service center for inspection.• The phone shall only be connected to CTIA certied adapters, products that bear the USB-IF logo or products that have completed the USB-IF compliance program.Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.An acceptable marking for an electric shock hazard is (ISO 3864, No. 5036).Equipment for restricted access locationsFor equipment intended only for installation in a RESTRICTED ACCESS LOCATION, the installation instructions shall contain a statement to this effect.WARNING: The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations.
Federal Communication Commission Interference StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution:Any Changes or modications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.NOTE: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must xed to US operation channels only.
RF Exposure Information (SAR)This device meets the government’s requirements for exposure to radio waves.This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for wireless device employs a unit of measurement known as the Specic Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certied power level in all tested frequency bands. Although the SAR is determined at the highest certied power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the poser required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The highest SAR value for the model device as reported to the FCC when
tested for use at the ear is 0.52 W/kg and when worn on the body, as described in this user guide, is 1.18 W/kg (Body-worn measurements differ among device models, depending upon available accessories and FCC requirements.)While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on le with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQZ00D.For body worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and be positioned a minimum of 1cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1cm from your body when the device is switched on.
continued on the next pageThe maximum SAR value when using the headset for each frequency band is listed below:Band Position SAR 1g (W/kg)GSM850Head 0.33Body (1.0cm Gap) 0.57Hotspot (1.0cm Gap) 1.15GSM1900Head 0.22Body (1.0cm Gap) 0.32Hotspot (1.0cm Gap) 0.66WCDMA IIHead 0.39Body (1.0cm Gap) 0.57Hotspot (1.0cm Gap) 0.67WCDMA VHead 0.33Body (1.0cm Gap) 0.57Hotspot (1.0cm Gap) 0.57LTE 2Head 0.30Body (1.0cm Gap) 0.51Hotspot (1.0cm Gap) 0.56
Band Position SAR 1g (W/kg)LTE 4Head 0.52Body (1.0cm Gap) 1.18Hotspot (1.0cm Gap) 1.23LTE 5Head 0.29Body (1.0cm Gap) 0.37Hotspot (1.0cm Gap) 0.38LTE 7Head 0.13Body (1.0cm Gap) 0.26Hotspot (1.0cm Gap) 0.26LTE 17Head 0.24Body (1.0cm Gap) 0.45Hotspot (1.0cm Gap) 0.452.4G WLANHead 0.48Body (1.0cm Gap) 0.38Hotspot (1.0cm Gap) 0.38BluetoothHead N/ABody (1.0cm Gap) N/AHotspot (1.0cm Gap) N/A
Hearing Aid Compatibility (HAC)This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your serviceTo determine the compatibility of a WD and a particular hearing aid, simply add the numerical part of the hearing aid category (e.g. M2/T2=2) with the numerical part of the WD emission rating (e.g., M3=3) to arrive at the system classication for this particular combination of WD and hearing aid. A sum of 5 would indicate that the WD and hearing aid would provide normal use, and a sum of 6 or greater would indicate that the WD and hearing aid would provide excellent performance. A category sum of less than 4 would likely result in a performance that is
judged unacceptable by the hearing aid user.WHAT IS HEARING AID COMPATIBILITY?The Federal Communications Commission has implemented rules and a rating system designed to enable people who wear hearing aids to more effectively use these wireless telecommunications devices. The standard for compatibility of digital wireless phones with hearing aids is set forth in American National Standard Institute (ANSI) standard C63.19. There are two sets of ANSI standards with ratings from one to four (four being the best rating): an “M” rating for reduced interference making it easier to hear conversations on the phone when using the hearing aid microphone, and a “T” rating that enables the phone to be used with hearing aids operating in the telecoil mode thus reducing unwanted background noise.HOW WILL I KNOW WHICH WIRELESS PHONES ARE HEARING AID COMPATIBLE?The Hearing Aid Compatibility rating is displayed on the wireless phone box.A phone is considered Hearing Aid Compatible for acoustic coupling (microphone mode) if it has an “M3” or
“M4” rating. A digital wireless phone is considered Hearing Aid Compatible for inductive coupling (telecoil mode) if it has a “T3” or “T4” rating.The tested M-Rating and T-Rating for this device (FCC ID: MSQZ00D) are M3 and T3.HOW WILL I KNOW IF MY HEARING AID WILL WORK WITH A PARTICULAR DIGITAL WIRELESS PHONE?You’ll want to try a number of wireless phones so that you can decide which works the best with your hearing aids. You may also want to talk with your hearing aid professional about the extent to which your hearing aids are immune to interference, if they have wireless phone shielding, and whether your hearing aid has a HAC rating.
ASUSAddress: 4F, No. 150 Li-Te Road, Peitou, Taipei, TaiwanTel: 886228943447; Fax: 886228907698DeclarationWe declare that the IMEI codes for this product, Z00D, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.Should you have any questions or comments regarding this matter, please contact us.Sincerely yours,ASUSTeK COMPUTER INC.Tel: 886228943447Fax: 886228907698Email: http://vip.asus.com/eservice/techserv.aspx
15060-53600000

Navigation menu