ASUSTeK Computer Z00TD ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone

User Manual

First Edition/ August 2015
Model: ZE551KL (ASUS_Z00TD)
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
Side features
NOTE: Pry open the rear cover from the groove.
Rear features
NOTES:
• Removetherearcovertodisplaythedualmicro
SIM and microSD card slots.
• ThemicroSIMcardslotssupportLTE,WCDMA,
and GSM/EDGE network bands.
• ThemicroSDcardslotsupportsmicroSDand
microSDHCcardformats.
Charging your ASUS Phone
To charge your ASUS Phone:
1. ConnecttheUSBconnectorintothepoweradapter’s
USB port.
2. ConnecttheotherendofthemicroUSBcableto
your ASUS Phone.
3. Plug the power adapter into a wall socket.
NOTES:
• Useonlythepoweradapterthatcamewithyour
device. Using a different power adapter may
damage your device.
• UsingthebundledpoweradapterandASUSPhone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
• Theinputvoltagerangebetweenthewalloutletand
thisadapterisAC100V-240V.Theoutputvoltage
ofthemicroUSBcableisDC+5.2V,1A,5W.
IMPORTANT!
• WhenusingyourASUSPhonewhileitispluggedto
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
• WhenchargingyourASUSPhonethroughyour
computer, ensure that you plug the micro USB
cabletoyourcomputer’sUSB2.0/USB3.0port.
• AvoidchargingyourASUSPhoneinan
environment with ambient temperature of above
35oC(95oF).
Touch screen
display
Receiver
LED indicator
Touch keys
Sensor
Front camera
Power Key
Audio jack
Micro USB port
Groove
Microphone
Rear camera
Camera ash
Rear cover
Speaker
Laser focus
Volume key
3
1
2
3. Removethebattery.
1. Locate the groove on the
bottom-rightcornerofyour
ASUS Phone.
Installing a micro SIM card
To install a micro SIM card:
2. Pry the cover loose
and then pull the
rear cover off.
NOTE: The micro SIM card slot 1 is at the lower part of
the micro SIM/ microSD combo card slot.
4. InsertthemicroSIMcardintooneofthemicroSIM
card slots.
Micro SIM/
microSD combo
card slot
Micro SIM card slot 2
IMPORTANT: Both micro SIM card slots support 3G
WCDMA/4GLTEnetworkband.Butonlyonemicro
SIMcardcanconnectto3GWCDMA/4GLTEservice
at a time.
1. Locate the groove on the
bottom-rightcornerofyour
ASUS Phone.
Installing a microSD card
To install a microSD card:
2. Pry the cover loose
and then pull the
rear cover off.
3. Removethebattery.
4. InsertthemicroSDcardintothemicroSDcardslot.
Micro SIM/
microSD combo
card slot
NOTE: The microSD card slot is at the upper part of the
micro SIM/ microSD combo card slot.
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
E10822
User Guide
Copyright©2015ASUSTeKCOMPUTERINC.
AllRightsReserved.
You acknowledge that all rights of this Manual remain with ASUS. Any
and all rights, including without limitation, in the Manual or website, and
shallremaintheexclusivepropertyofASUSand/oritslicensors.Nothing
in this Manual intends to transfer any such rights, or to vest any such
rights to you.
ASUSPROVIDESTHISMANUAL“ASIS”WITHOUTWARRANTYOF
ANYKIND.SPECIFICATIONSANDINFORMATIONCONTAINEDINTHIS
MANUALAREFURNISHEDFORINFORMATIONALUSEONLY,AND
ARESUBJECTTOCHANGEATANYTIMEWITHOUTNOTICE,AND
SHOULDNOTBECONSTRUEDASACOMMITMENTBYASUS.
Prevention of Hearing Loss
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
For France, headphones/earphones for this device are
compliant with the sound pressure level requirement
laiddownintheapplicableEN50332-1:2013and/or
EN50332-2:2013standardrequiredbyFrenchArticle
L.5232-1.
The charger
• UseonlythechargersuppliedwithyourASUS
Phone.
• Neverpullthechargercordtodisconnectitfromthe
power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
markingsonthe(1)ACAdapter.
• DonotusetheASUSPhoneinanextreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimallyinanambienttemperaturebetween-10°C
(14°F)and35°C(95°F).
• DonotdisassembletheASUSPhoneorits
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
isdisassembled,ariskofelectricshockorremay
result.
• Donotshort-circuitthebatteryterminalswithmetal
items.
Operator access with a tool
IfaTOOLisnecessarytogainaccesstoanOPERATOR
ACCESSAREA,eitherallothercompartmentswithin
that area containing a hazard shall be inaccessible
totheOPERATORbytheuseofthesameTOOL,or
such compartments shall be marked to discourage
OPERATORaccess.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our
commitment to the highest standards for protecting our
environment.Webelieveinprovidingsolutionsforyou
to be able to responsibly recycle our products, batteries,
other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm
for detailed recycling information in different regions.
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
DONOTthrowthebatteryinmunicipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
DONOTthrowthisproductinmunicipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containingbuttoncellbattery)
should not be placed in municipal waste.
Checklocalregulationsfordisposalof
electronic products.
DONOTthrowthisproductinre.DO
NOTshortcircuitthecontacts.DONOT
disassemble this product.
ASUS
Address: 15 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
WedeclarethattheIMEIcodesforthisproduct,ASUS
Phone, are unique to each unit and only assigned to this
model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the
relevant IMEI integrity related requirements expressed
in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel:886228943447
Fax:886228907698
Support:
http://vip.asus.com/eservice/techserv.aspx
15060-67700000
thathasnotbeentestedorcertied,andusesuch
accessories should be avoided.
CE RF Exposure Compliance
ThisdevicemeetstheEUrequirements(1999/519/EC)
on the limitation of exposure of the general public to
electromagneticeldsbywayofhealthprotection.
Forbody-wornoperation,thisdevicehasbeentestedand
meetstheICNIRPguidelinesandtheEuropeanStandard
EN62209-2,forusewithdedicatedaccessories.SARis
measured with this device at a separation of 1.5 cm to
thebody,whiletransmittingatthehighestcertiedoutput
power level in all frequency bands of this device. Use of
other accessories which contain metals may not ensure
compliancewithICNIRPexposureguidelines.
CE Mark Warning
56
CE marking for devices with wireless LAN/
Bluetooth
This equipment complies with the requirements of
Directive1999/5/ECoftheEuropeanParliamentand
Commissionfrom9March,1999governingRadioand
Telecommunications Equipment and mutual recognition
ofconformity.ThehighestCESARvaluesforthedevice
are as follows:
• 0.361W/kg@10g(Head)
• 0.313W/kg@10g(Body)
Using GPS (Global Positioning
System) on your ASUS Phone
To use the GPS positioning feature on your ASUS Phone:
• Ensure that your device is connected to the
InternetbeforeusingGoogleMaporanyGPS-
enabled apps.
• Forrst-timeuseofaGPS-enabledapponyour
device, ensure that you are outdoors to get the
best positioning data.
• WhenusingaGPS-enabledapponyourdevice
inside a vehicle, the metallic component of the car
window and other electronic devices might affect
the GPS performance.
Safety information
ASUS Phone care
• UseyourASUSPhoneinanenvironmentwith
ambienttemperaturesbetween-10°C(14°F)and
35°C(95°F).
The battery
Your ASUS Phone is equipped with a high performance
detachableLi-Ionbattery.Observethemaintenance
guidelines for a longer battery life.
• Avoidcharginginextremelyhighorlowtemperature.
The battery performs optimally in an ambient
temperatureof+5°Cto+35°C.
• UseonlyASUSbattery.Usingadifferentbattery
may cause physical harm/injury and may damage
your device.
• Donotremoveandsoakthebatteryinwaterorany
other liquid.
• Nevertrytoopenthebatteryasitcontains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
• Donotremoveandshort-circuitthebattery,asit
mayoverheatandcauseare.Keepitawayfrom
jewelry or metal objects.
• Donotremoveanddisposeofthebatteryinre.It
could explode and release harmful substances into
the environment.
• Donotremoveanddisposeofthebatterywithyour
regular household waste. Take it to a hazardous
material collection point.
• Donottouchthebatteryterminals.
NOTES:
• Riskofexplosionifbatteryisreplacedbyan
incorrect type.
• Disposeofusedbatteryaccordingtothe
instructions.
Laser Safety Information
Class 1 LASER PRODUCT
Regional notice for Singapore
This ASUS Phone complies
with IDA Standards.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
Federal Communications Commission
Statement
Thisdevicecomplieswithpart15oftheFCCRules.
Operationissubjecttothefollowingtwoconditions:(1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changesormodicationsnotexpresslyapprovedbythe
party responsible for compliance could void the user‘s
authority to operate the equipment.
This equipment has been tested and found to comply with
thelimitsforaClassBdigitaldevice,pursuanttopart15
oftheFCCRules.Theselimitsaredesignedtoprovide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorientorrelocatethereceivingantenna.
- Increasetheseparationbetweentheequipmentand
receiver.
- Connecttheequipmentintoanoutletonacircuit
different from that to which the receiver is connected.
- Consultthedealeroranexperiencedradio/TV
technician for help.
Theantenna(s)usedforthistransmittermustnotbeco-
located or operating in conjunction with any other antenna
or transmitter.
Thecountrycodeselectionisfornon-USmodelonlyand
isnotavailabletoallUSmodel.PerFCCregulation,all
WiFiproductmarketedinUSmustxedtoUSoperation
channels only.
TheFCCIDforthisdeviceisMSQZ00TD.
ThehighestFCCSARvalueforthedeviceis1.37W/
kg@1g.
Canada, Industry Canada (IC) Notices
ThisdevicecomplieswithIndustryCanada’slicence-
exemptRSSs.Operationissubjecttothefollowingtwo
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
LeprésentappareilestconformeauxCNRd'Industrie
Canadaapplicablesauxappareilsradioexemptsde
licence.L'exploitationestautoriséeauxdeuxconditions
suivantes:
(1) l'appareilnedoitpasproduiredebrouillage,et
(2) l'utilisateurdel'appareildoitacceptertoutbrouillage
radioélectrique subi, même si le brouillage est
susceptibled'encompromettrelefonctionnement."
CAN ICES-3(B)/NMB-3(B)
ThisClassBdigitalapparatuscomplieswithCanadian
ICES-003.
CetappareilnumériquedelaclasseBestconformeàla
normeNMB-003duCanada.
TheICIDforthisdeviceis3568A-Z00TD.
L’identiantIndustrieCanadadecetappareilest:
3568A-Z00TD.
RF Exposure Information (SAR)
ToreduceexposuretoRFenergy,useahands-free
accessory or other similar option to keep this device
awayfromyourheadandbody.Carrythisdeviceatleast
15 mm away from your body to ensure exposure levels
remainatorbelowtheas-testedlevels.Choosethebelt
clips,holsters,orothersimilarbody-wornaccessories
which do not contain metallic components to support
operationinthismanner.Caseswithmetalpartsmay
changetheRFperformanceofthedevice,includingits
compliancewithRFexposureguidelines,inamanner

Navigation menu