ASUSTeK Computer Z00TD ASUS Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2752235
Application ID	Xv/Jaefrt/VSdDsZHYBIKQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102.37kB (1279597 bits)
Date Submitted	2015-09-17 00:00:00
Date Available	2016-03-15 00:00:00
Creation Date	2017-09-14 06:28:25
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-09-14 06:28:25
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Rear features
Side features
First Edition/ August 2015
Rear camera
Camera lash
Audio jack
Model: ZE551KL (ASUS_Z00TD)
Power Key
Laser focus
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
Volume key
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Front features
User Guide
Rear cover
Receiver
Sensor
LED indicator
Front camera
Groove
Speaker
Touch screen
display
Microphone Micro USB port
NOTES:
NOTE: Pry open the rear cover from the groove.
•
Remove the rear cover to display the dual micro
SIM and microSD card slots.
•
The micro SIM card slots support LTE, WCDMA,
and GSM/EDGE network bands.
The microSD card slot supports microSD and
microSDHC card formats.
•
Touch keys
E10822
Charging your ASUS Phone
Installing a micro SIM card
To charge your ASUS Phone:
To install a micro SIM card:
1.
Connect the USB connector into the power adapter’s
USB port.
1.
2.
Connect the other end of the micro USB cable to
your ASUS Phone.
3.
Plug the power adapter into a wall socket.
Locate the groove on the
bottom-right corner of your
ASUS Phone.
4.
Insert the micro SIM card into one of the micro SIM
card slots.
Micro SIM/
microSD combo
card slot
2.
Pry the cover loose
and then pull the
rear cover off.
3.
Remove the battery.
4.
Insert the microSD card into the microSD card slot.
Micro SIM card slot 2
2.
NOTE: The micro SIM card slot 1 is at the lower part of
the micro SIM/ microSD combo card slot.
Pry the cover loose
and then pull the
rear cover off.
IMPORTANT!
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
•
IMPORTANT: Both micro SIM card slots support 3G
WCDMA/ 4G LTE network band. But only one micro
SIM card can connect to 3G WCDMA/ 4G LTE service
at a time.
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
3.
Remove the battery.
Installing a microSD card
To install a microSD card:
Micro SIM/
microSD combo
card slot
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the micro USB cable is DC +5.2V, 1A, 5W.
•
1.
Locate the groove on the
bottom-right corner of your
ASUS Phone.
NOTE: The microSD card slot is at the upper part of the
micro SIM/ microSD combo card slot.
Federal Communications Commission
Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modiications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna
or transmitter.
The country code selection is for non-US model only and
is not available to all US model. Per FCC regulation, all
WiFi product marketed in US must ixed to US operation
channels only.
The FCC ID for this device is MSQZ00TD.
Safety information
ASUS Phone care
•
Use your ASUS Phone in an environment with
ambient temperatures between -10 °C (14 °F) and
35 °C (95 °F).
The battery
Your ASUS Phone is equipped with a high performance
detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
•
•
Avoid charging in extremely high or low temperature.
The battery performs optimally in an ambient
temperature of +5 °C to +35 °C.
Use only ASUS battery. Using a different battery
may cause physical harm/injury and may damage
your device.
•
Do not remove and soak the battery in water or any
other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
•
Do not remove and short-circuit the battery, as it
may overheat and cause a ire. Keep it away from
jewelry or metal objects.
•
Do not remove and dispose of the battery in ire. It
could explode and release harmful substances into
the environment.
•
Do not remove and dispose of the battery with your
regular household waste. Take it to a hazardous
material collection point.
•
Do not touch the battery terminals.
NOTES:
•
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
The highest FCC SAR value for the device is 1.37 W/
kg@1g.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada’s licenceexempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement."
that has not been tested or certiied, and use such
accessories should be avoided.
CE RF Exposure Compliance
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
The IC ID for this device is 3568A-Z00TD.
L’identiiant Industrie Canada de cet appareil est:
3568A-Z00TD.
RF Exposure Information (SAR)
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device at least
15 mm away from your body to ensure exposure levels
remain at or below the as-tested levels. Choose the belt
clips, holsters, or other similar body-worn accessories
which do not contain metallic components to support
operation in this manner. Cases with metal parts may
change the RF performance of the device, including its
compliance with RF exposure guidelines, in a manner
The charger
•
Use only the charger supplied with your ASUS
Phone.
•
Never pull the charger cord to disconnect it from the
power socket. Pull the charger itself.
Caution
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
markings on the (1) AC Adapter.
•
•
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between -10 °C
(14 °F) and 35 °C (95 °F).
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
is disassembled, a risk of electric shock or ire may
result.
Do not short-circuit the battery terminals with metal
items.
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
OPERATOR access.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our
commitment to the highest standards for protecting our
environment. We believe in providing solutions for you
to be able to responsibly recycle our products, batteries,
other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm
for detailed recycling information in different regions.
To use the GPS positioning feature on your ASUS Phone:
This device meets the EU requirements (1999/519/EC)
on the limitation of exposure of the general public to
electromagnetic ields by way of health protection.
•
Ensure that your device is connected to the
Internet before using Google Map or any GPSenabled apps.
For body-worn operation, this device has been tested and
meets the ICNIRP guidelines and the European Standard
EN 62209-2, for use with dedicated accessories. SAR is
measured with this device at a separation of 1.5 cm to
the body, while transmitting at the highest certiied output
power level in all frequency bands of this device. Use of
other accessories which contain metals may not ensure
compliance with ICNIRP exposure guidelines.
•
For irst-time use of a GPS-enabled app on your
device, ensure that you are outdoors to get the
best positioning data.
•
When using a GPS-enabled app on your device
inside a vehicle, the metallic component of the car
window and other electronic devices might affect
the GPS performance.
CE Mark Warning
Prevention of Hearing Loss
56
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with Canadian
ICES-003.
Using GPS (Global Positioning
System) on your ASUS Phone
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
CE marking for devices with wireless LAN/
Bluetooth
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition
of conformity.The highest CE SAR values for the device
are as follows:
•
0.361 W/kg@10g (Head)
•
0.313 W/kg@10g (Body)
Regional notice for Singapore
This ASUS Phone complies
with IDA Standards.
Laser Safety Information
Class 1 LASER PRODUCT
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
DO NOT throw this product in municipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containing button cell battery)
should not be placed in municipal waste.
Check local regulations for disposal of
electronic products.
DO NOT throw this product in ire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
For France, headphones/earphones for this device are
compliant with the sound pressure level requirement
laid down in the applicable EN 50332-1:2013 and/or
EN50332-2:2013 standard required by French Article
L.5232-1.
ASUS
Address: 15 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886228943447
Fax: 886228907698
Declaration
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to this
model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the
relevant IMEI integrity related requirements expressed
in the GSM standards.
Should you have any questions or comments regarding
this matter, please contact us.
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support:
http://vip.asus.com/eservice/techserv.aspx
Copyright © 2015 ASUSTeK COMPUTER INC.
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS. Any
and all rights, including without limitation, in the Manual or website, and
shall remain the exclusive property of ASUS and/or its licensors. Nothing
in this Manual intends to transfer any such rights, or to vest any such
rights to you.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
15060-67700000

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Create Date                     : 2015:09:10 10:07:22+08:00
Metadata Date                   : 2015:09:16 17:54:09+08:00
Modify Date                     : 2015:09:16 17:54:09+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:c0de4e32-e7b5-45a2-809e-5083f9f586a1
Original Document ID            : xmp.did:56477ECB29A1E411AC55B9AF3A574922
Document ID                     : xmp.id:4684438F6057E51190629398EE22B412
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:4584438F6057E51190629398EE22B412
Derived From Document ID        : xmp.did:F05BA319E646E511A693C92C7FBDDDD5
Derived From Original Document ID: xmp.did:56477ECB29A1E411AC55B9AF3A574922
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:09:10 10:07:22+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools