ASUSTeK Computer Z00XS ASUS Phone User Manual

ASUSTeK Computer Inc ASUS Phone Users Manual

Contents

Users Manual

Download: ASUSTeK Computer Z00XS ASUS Phone User Manual
Mirror Download [FCC.gov]ASUSTeK Computer Z00XS ASUS Phone User Manual
Document ID2772412
Application IDP9VdjLixIZlt9ZoTLU5AzQ==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize61.49kB (768627 bits)
Date Submitted2015-10-05 00:00:00
Date Available2016-04-02 00:00:00
Creation Date2017-09-10 19:56:12
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-09-10 19:56:12
Document TitleUsers Manual
Document CreatorAdobe InDesign CS6 (Windows)

Side features
First Edition/ September 2015
Rear features
Audio jack
Model: ASUS_Z00XS (ZX551ML)
Before you start, ensure that you have read all the safety
information and operating instructions in this User Guide
to prevent injury or damage to your device.
Rear camera
Charging your ASUS Phone
Installing a micro SIM card
To charge your ASUS Phone:
To install a micro SIM card:
1.
Connect the USB connector into the power adapter’s
USB port.
1.
Locate the groove at the
bottom of your ASUS Phone.
2.
Connect the other end of the micro USB cable to
your ASUS Phone.
3.
Plug the power adapter into a wall socket.
2.
Pry the cover loose and then
pull the rear cover off.
3.
Insert the micro SIM card
into the micro SIM card slot.
Laser focus
Volume key
NOTE: For the latest updates and more detailed
information, please visit www.asus.com.
Flash
Power key
Rear cover
Front features
User Guide
Light sensor
P-sensor
IMPORTANT!
Record key
Front camera
Shutter key
•
When using your ASUS Phone while it is plugged to
a power outlet, the grounded power outlet must be
near to the unit and easily accessible.
•
When charging your ASUS Phone through your
computer, ensure that you plug the micro USB
cable to your computer’s USB 2.0 / USB 3.0 port.
Avoid charging your ASUS Phone in an
environment with ambient temperature of above
35oC (95oF).
Receiver
Speaker
Volume key
Strap hole Microphone
Groove
Power key
Micro USB port
Touch screen
display
Speaker
NOTES:
•
Remove the rear cover to display the micro SIM
and microSD card slots.
•
The micro SIM card slot supports WCDMA, DCHSPA, GSM/EDGE, and FDD-LTE network bands.
The microSD card slot supports microSD and
microSDHC card formats.
•
NOTE: Pry open the rear cover from the groove.
•
NOTES:
•
Use only the power adapter that came with your
device. Using a different power adapter may
damage your device.
•
Using the bundled power adapter and ASUS Phone
signal cable to connect your ASUS Phone to a
power outlet is the best way to charge your ASUS
Phone.
The input voltage range between the wall outlet and
this adapter is AC 100V - 240V. The output voltage
of the micro USB cable is +9V 2A, 18W.
Touch keys
E10512
Installing a microSD card
To install a microSD card:
1.
2.
Locate the groove at the
bottom of your ASUS Phone.
•
Turning your ASUS Phone on or off
Press the power key at the right side of your ASUS Phone
to power the device on or to power it off.
Pry the cover loose and then
pull the rear cover off.
Power key
3.
Insert the microSD card into
the microSD card slot.
IMPORTANT: The irst time you power on your ASUS
Phone, you will see the Welcome screen. Touch the
menu to select your preferred language then touch Next
Step. Follow the onscreen instructions to set up your
ASUS Phone.
CAUTION: Do not use sharp tools or solvent on your
device to avoid scratches on it.
Federal Communications Commission
Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Changes or modiications not expressly approved by the
party responsible for compliance could void the user‘s
authority to operate the equipment.
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
CAUTION:
•
•
High-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
5GHz product for indoor use only.
Hearing Aid Compatibility Information
(HAC)
Your phone is compliant with the FCC Hearing Aid
Compatibility requirements.
The FCC has adopted HAC rules for digital wireless
phones. These rules require certain phone to be tested
and rated under the American National Standard Institute
(ANSI) C63.19-2011 hearing aid compatibility standards.
The ANSI standard for hearing aid compatibility contains
two types of ratings:
M-Ratings: Rating for less radio frequency interference to
enable acoustic coupling with hearing aids.
T-Ratings: Rating for inductive coupling with hearing aids
in telecoil mode.
Not all phones have been rated, a phone is considered
hearing aid compatible under FCC rules if it is rated M3
or M4 for acoustic coupling and T3 or T4 for inductive
coupling. These ratings are given on a scale from one
to four, where four is the most compatible. Your phone
meets the M4/T4 level rating.
However, hearing aid compatibility ratings don’t guarantee
that interference to your hearing aids won’t happen.
Results will vary, depending on the level of immunity
of your hearing device and the degree of your hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
The country code selection is for non-US model only and
is not available to all US model. Per FCC regulation, all
WiFi product marketed in US must ixed to US operation
channels only.
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies that
it uses. However, there may be some newer wireless
technologies used in this phone that have not been tested
Consult the dealer or an experienced radio/TV
technician for help.
The antenna(s) used for this transmitter must not be colocated or operating in conjunction with any other antenna
or transmitter.
IMPORTANT: Use only a micro SIM card on your ASUS
Phone. A trimmed SIM card may not properly it into and
may not be detected by your ASUS Phone.
yet for use with hearing aids. It is important to try the
different features of this phone thoroughly and in different
locations, using your hearing aid or cochlear implant,
to determine if you hear any interfering noise. Consult
your service provider or the manufacturer of this phone
for information on hearing aid compatibility. If you have
questions about return or exchange policies, consult your
service provider or phone retailer.
the following web address: http://www.ic.gc.ca/app/sitt/
reltel/srch/nwRdSrch.do?lang=eng
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you
ind this rating. For more information about FCC Hearing
Aid Compatibility, please go to http://www.fcc.gov/cgb/dro.
La puissance de sortie émise par cet appareil sans il
est inférieure à la limite d’exposition aux fréquences
radio d’Industrie Canada (IC). Utilisez l’appareil sans
il de façon à minimiser les contacts humains lors du
fonctionnement normal.
Canada, Industry Canada (IC) Notices
Ce périphérique a été évalué et démontré conforme
aux limites SAR (Speciic Absorption Rate – Taux
d’absorption spéciique) d’IC lorsqu’il est installé dans
des produits hôtes particuliers qui fonctionnent dans des
conditions d’exposition à des appareils portables.
This device complies with Industry Canada’s licenceexempt RSS standard(s). Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes:
Additional Canadian information on RF exposure also can
be found at the following web address: http://www.ic.gc.
ca/eic/site/smt-gst.nsf/eng/sf08792.html
Informations concernant l’exposition aux fréquences
radio (RF)
Ce périphérique est homologué pour l’utilisation au
Canada. Pour consulter l’entrée correspondant à
l’appareil dans la liste d’équipement radio (REL - Radio
Equipment List) d’Industrie Canada rendez-vous sur:
http://www.ic.gc.ca/app/sitt/reltel/srch/nwRdSrch.
do?lang=eng
Pour des informations supplémentaires concernant
l’exposition aux RF au Canada rendez-vous sur:
(1) l'appareil ne doit pas produire de brouillage, et
http://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Radio Frequency (RF) Exposure Information
Caution
The radiated output power of the Wireless Device is
below the Industry Canada (IC) radio frequency exposure
limits. The Wireless Device should be used in such a
manner such that the potential for human contact during
normal operation is minimized. This device has been
evaluated for and shown compliant with the IC Speciic
Absorption Rate (“SAR”) limits when installed in speciic
host products operated in portable exposure conditions.
Canada’s REL (Radio Equipment List) can be found at
(i)
the device for operation in the band 5150-5250 MHz
is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite
systems;
(ii)
the maximum antenna gain permitted for devices
in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits speciied for point-to-point and non
point-to-point operation as appropriate.
Avertissement
Le guide d’utilisation des dispositifs pour réseaux locaux
doit inclure des instructions précises sur les restrictions
susmentionnées, notamment:
(i)
les dispositifs fonctionnant dans la bande 5 150-5
250 MHz sont réservés uniquement pour une
utilisation à l’intérieur ain de réduire les risques de
brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii)
le gain maximal d’antenne permis (pour les
dispositifs utilisant la bande 5 725-5 825 MHz) doit
se conformer à la limite de p.i.r.e. spéciiée pour
l’exploitation point à point et non point à point, selon
le cas.
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with Canadian
ICES-003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.
This device and its antenna(s) must not be co-located
or operating in conjunction with any other antenna or
transmitter, except tested built-in radios.
The County Code Selection feature is disabled for
products marketed in the US/ Canada.
Cet appareil et son antenne ne doivent pas être situés ou
fonctionner en conjonction avec une autre antenne ou un
autre émetteur, exception faites des radios intégrées qui
ont été testées.
La fonction de sélection de l’indicatif du pays est
désactivée pour les produits commercialisés aux ÉtatsUnis et au Canada.
The IC ID for this device is 3568A-Z00XS.
L’identiiant Industrie Canada de cet appareil est:
3568A-Z00XS.
RF Exposure Information (SAR)
This device has been tested and meets applicable limits
for Radio Frequency (RF) exposure.
Speciic Absorption Rate (SAR) refers to the rate at which
the body absorbs RF energy. SAR limits are 1.6 Watts
per kilogram (over a volume containing a mass of 1 gram
of tissue) in countries that follow the United States FCC
limit and 2.0 W/kg (averaged over 10 grams of tissue)
in countries that follow the Council of the European
Union limit. Tests for SAR are conducted using standard
operating positions with the device transmitting at its
highest certiied power level in all tested frequency bands.
CE Mark Warning
To reduce exposure to RF energy, use a hands-free
accessory or other similar option to keep this device
away from your head and body. Carry this device at least
15 mm away from your body to ensure exposure levels
remain at or below the as-tested levels. Choose the belt
clips, holsters, or other similar body-worn accessories
which do not contain metallic components to support
operation in this manner. Cases with metal parts may
change the RF performance of the device, including its
compliance with RF exposure guidelines, in a manner
that has not been tested or certiied, and use such
accessories should be avoided.
CE marking for devices with wireless LAN/
Bluetooth
The highest FCC SAR values for the device are as
follows:
•
0.46 W/Kg (Head)
This device meets the EU requirements (1999/519/EC)
on the limitation of exposure of the general public to
electromagnetic ields by way of health protection.
For body-worn operation, this device has been tested and
meets the ICNIRP guidelines and the European Standard
EN 62209-2, for use with dedicated accessories. SAR is
measured with this device at a separation of 1.5 cm to
the body, while transmitting at the highest certiied output
power level in all frequency bands of this device. Use of
other accessories which contain metals may not ensure
compliance with ICNIRP exposure guidelines.
Proper disposal
Risk of explosion if battery is replaced
by an incorrect type. Dispose of used
batteries according to the instructions.
BE
BG
CH
CY
CZ
DE
DK
EE
ES
FI
FR
GB
GR
HU
IE
IT
IS
LI
LT
LU
LV
MT
NL
NO
PL
PT
RO
SE
SI
SK
TR
To use the GPS positioning feature on your ASUS Phone:
•
Ensure that your device is connected to the
Internet before using Google Map or any GPSenabled apps.
•
For irst-time use of a GPS-enabled app on your
device, ensure that you are outdoors to get the
best positioning data.
•
When using a GPS-enabled app on your device
inside a vehicle, the metallic component of the car
window and other electronic devices might affect
the GPS performance.
EC Declaratie de Conformitate
Noi, subsemnații,
Producător :
ASUSTeK COMPUTER INC.
Adresă:
Strada PEITOU Nr 150, Li-TE etaj 4, TAIPEI 112, TAIWAN
Authorized representative in Europe:
ASUS COMPUTER GmbH
Reprezentant autorizat în Europa:
Address, City:
HARKORT STR. 21-23, 40880 RATINGEN
Country:
GERMANY
To prevent possible hearing damage, do not listen at high
volume levels for long periods.
•
Do not remove and soak the battery in water or any
other liquid.
•
Never try to open the battery as it contains
substances that might be harmful if swallowed or
allowed to come into contact with unprotected skin.
•
Do not remove and short-circuit the battery, as it
may overheat and cause a ire. Keep it away from
jewelry or metal objects.
For France, headphones/earphones for this device are
compliant with the sound pressure level requirement
laid down in the applicable EN 50332-1:2013 and/or
EN50332-2:2013 standard required by French Article
L.5232-1.
ASUS COMPUTER GmbH
Adresă, Oraș:
Strada HARKORT Nr 21-23, RATINGEN 40880
Ț ară :
Germania
declarăm c ă următorul aparat:
Product name :
ASUS Phone
Nume produs:
ASUS Phone
Model name :
ASUS_Z00XS
Nume model:
ASUS_Z00XS
•
Do not remove and dispose of the battery in ire. It
could explode and release harmful substances into
the environment.
•
Do not remove and dispose of the battery with your
regular household waste. Take it to a hazardous
material collection point.
•
Do not touch the battery terminals.
NOTES:
•
Safety information
•
Risk of explosion if battery is replaced by an
incorrect type.
Dispose of used battery according to the
instructions.
•
Do not disassemble the ASUS Phone or its
accessories. If service or repair is required, return
the unit to an authorized service center. If the unit
is disassembled, a risk of electric shock or ire may
result.
•
Do not short-circuit the battery terminals with metal
items.
Operator access with a tool
If a TOOL is necessary to gain access to an OPERATOR
ACCESS AREA, either all other compartments within
that area containing a hazard shall be inaccessible
to the OPERATOR by the use of the same TOOL, or
such compartments shall be marked to discourage
OPERATOR access.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our
commitment to the highest standards for protecting our
environment. We believe in providing solutions for you
to be able to responsibly recycle our products, batteries,
other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for
detailed recycling information in different regions.
ASUS Phone care
•
Using GPS (Global Positioning
System) on your ASUS Phone
ASUSTeK COMPUTER INC.
Use your ASUS Phone in an environment with
ambient temperatures between -10 °C (14 °F) and
35 °C (95 °F).
The charger
•
Use only the charger supplied with your ASUS
Phone.
The battery
•
Your ASUS Phone is equipped with a high performance
non-detachable Li-Ion battery. Observe the maintenance
guidelines for a longer battery life.
Never pull the charger cord to disconnect it from the
power socket. Pull the charger itself.
Caution
•
Do not remove the non-detachable Li-on battery as
this will void the warranty.
•
Avoid charging in extremely high or low temperature.
The battery performs optimally in an ambient
temperature of +5 °C to +35 °C.
Regional notice for Singapore
This ASUS Phone complies
with IDA Standards.
Your ASUS Phone is a high quality piece of equipment.
Before operating, read all instructions and cautionary
markings on the (1) AC Adapter.
•
Do not use the ASUS Phone in an extreme
environment where high temperature or high
humidity exists. The ASUS Phone performs
optimally in an ambient temperature between -10 °C
(14 °F) and 35 °C (95 °F).
ASUS
Address: 150 Li-Te Road, Peitou, Taipei, Taiwan
Tel: 886228943447
Fax: 886228907698
este conform cu cerințele esențiale ale următoarelor directive:
Directiva 2004/108/EC-EMC
EN 55022:2010+AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55022:2010+AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
Declaration
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
Directiva 1999/5/EC-R&TTE
1999/5/EC-R&TTE Directive
EN 300 328 V1.9.1
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 50360:2001
EN 62479:2010
EN 62311:2008
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
EN 300 328 V1.9.1
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 50360:2001
EN 62479:2010
EN 62311:2008
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 301 908-13 V6.2.1
EN 300 330-1 V1.7.1
EN 300 330-2 V1.5.1
We declare that the IMEI codes for this product, ASUS
Phone, are unique to each unit and only assigned to this
model. The IMEI of each unit is factory set and cannot
be altered by the user and that it complies with the
relevant IMEI integrity related requirements expressed in
the GSM standards.
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 301 908-13 V6.2.1
EN 300 330-1 V1.7.1
EN 300 330-2 V1.5.1
Directiva 2006/95/EC-LVD
2006/95/EC-LVD Directive
DO NOT throw this product in ire. DO
NOT short circuit the contacts. DO NOT
disassemble this product.
AT
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
2004/108/EC-EMC Directive
DO NOT throw this product in municipal
waste. This product has been designed
to enable proper reuse of parts and
recycling. The symbol of the crossed out
wheeled bin indicates that the product
(electrical, electronic equipment and
mercury-containing button cell battery)
should not be placed in municipal waste.
Check local regulations for disposal of
electronic products.
For 5GHz WLAN: This equipment may be operated in:
Manufacturer:
declare the following apparatus:
Do not remove and replace the battery with a nonapproved battery.
0.343 W/Kg (Head)
•
0.432 W/Kg (Body)
This device is restricted for indoor use only when
operating under 5150 MHz to 5350 MHz of frequency
range.
Address:
conform with the essential requirements of the following directives:
DO NOT throw the battery in municipal
waste. The symbol of the crossed out
wheeled bin indicates that the battery
should not be placed in municipal waste.
•
EC Declaration of Conformity
We, the undersigned,
•
This equipment complies with the requirements of
Directive 1999/5/EC of the European Parliament and
Commission from 9 March, 1999 governing Radio and
Telecommunications Equipment and mutual recognition
of conformity.The highest CE SAR values for the device
are as follows:
•
1.16 W/Kg (Body)
The FCC has granted an Equipment Authorization for
this device with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this device is on ile with the FCC and can
be found under the Display Grant section of www.fcc.gov/
oet/ea/fccid after searching on FCC ID: MSQZ00XS.
CE RF Exposure Compliance
Prevention of Hearing Loss
EN 60950-1: 2006 / A12: 2011
EN 60950-1: 2006 / A12: 2011
EN 60065:2002 / A12: 2011
EN 60065:2002 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60950-1: 2006 / A2: 2013
Directiva 2009/125/EC-ErP
2009/125/EC-ErP Directive
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU No. 617/2013
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directive
Ver. 140331
Directiva 2011/65/EU-RoHS
Ver. 150326
Însemnul CE
CE marking
0682
0682
(EC conformity marking)
Position :
CEO
Name :
Jerry Shen
(Însemnul de conformitate EC)
Poziția:
Nume:
CEO
Jerry Shen
Declaration Date: 20/09/2015
Year to begin affixing CE marking: 2015
Signature : __________
Data declarației: 20/08/2015
Anul aplicării ฀nsemnului CE: 201 5
Semnătura: __________
EC Uygunluk Beyanı
EC Declaração de Conformidade
Biz, bu imza altındakiler
Nós, os abaixo assinados,
Fabricante:
ASUSTeK COMPUTER INC.
Morada:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Representante autorizado na Europa:
ASUS COMPUTER GmbH
Üretici:
ASUSTeK COMPUTER INC.
Adres, Şehir:
4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN
Avrupa’daki Yetkili:
ASUS COMPUTER GmbH
Morada, Cidade:
HARKORT STR. 21-23, 40880 RATINGEN
Adres, Şehir:
HARKORT STR. 21-23, 40880 RATINGEN
País:
GERMANY
Ülke:
ALMANYA
Aşağıdaki ürünün:
declaramos que o seguinte produto:
Nome do Produto :
ASUS Phone
Modelo :
ASUS_Z00XS
EN 55022:2010+AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
EN 300 328 V1.9.1
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 50360:2001
EN 62479:2010
EN 62311:2008
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 301 908-13 V6.2.1
EN 300 330-1 V1.7.1
EN 300 330-2 V1.5.1
All Rights Reserved.
You acknowledge that all rights of this Manual remain with ASUS. Any
and all rights, including without limitation, in the Manual or website, and
shall remain the exclusive property of ASUS and/or its licensors. Nothing
in this Manual intends to transfer any such rights, or to vest any such
rights to you.
EN 301 489-1 V1.9.2(2011-09)
EN 301 489-3 V1.4.1(2002-08)
EN 301 489-4 V1.4.1(2009-05)
EN 301 489-7 V1.3.1(2005-11)
EN 301 489-9 V1.4.1(2007-11)
EN 301 489-17 V2.2.1(2012-09)
EN 301 489-24 V1.5.1(2010-09)
EN 302 291-1 V1.1.1(2005-07)
EN 302 291-2 V1.1.1(2005-07)
EN 301 908-13 V6.2.1
EN 300 330-1 V1.7.1
EN 300 330-2 V1.5.1
2006/95/EC-LVD Direktifi
2006/95/EC-LVD Directiva
EN 60950-1: 2006 / A12: 2011
EN 60065:2002 / A12: 2011
EN 60065:2002 / A12: 2011
EN 60950-1: 2006 / A2: 2013
EN 60950-1: 2006 / A2: 2013
2009/125/EC-ErP Direktifi
2009/125/EC-ErP Directiva
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
2011/65/EU-RoHS Directiva
Ver. 150326
Marca de CE
Regulation (EC) No. 1275/2008
Regulation (EC) No. 278/2009
Regulation (EC) No. 642/2009
Regulation (EU) No. 617/2013
2011/65/EU-RoHS Direktifi
Ver. 150326
CE işareti
0682
0682
Posição :
CEO
Nome :
Jerry Shen
İsim :
Deklarasyon Tarihi: 20/08/2015
CE İşaretinin Eklendiği Yıl: 2015
Data da declaração: 20/08/2015
Ano para começar a aposição da marca CE: 2015
Assinatura : __________
(EC uygunluk işareti)
Pozisyon :
(Marca de Conformidade EC)
Sincerely yours,
ASUSTeK COMPUTER INC.
Tel: 886228943447
Fax: 886228907698
Support: http://vip.asus.com/eservice/techserv.aspx
Support for United States:
http://www.asus.com/US/Phones
Copyright © 2015 ASUSTeK COMPUTER INC.
EN 55024:2010
EN 61000-3-3:2013
EN 55020:2007+A11:2011
1999/5/EC-R&TTE Direktifi
1999/5/EC-R&TTE Directiva
EN 60950-1: 2006 / A12: 2011
ASUS_Z00XS
2004/108/EC-EMC Direktifi
2004/108/EC-EMC Directiva
EN 300 328 V1.9.1
EN 300 440-1 V1.6.1(2010-08)
EN 300 440-2 V1.4.1(2010-08)
EN 301 511 V9.0.2(2003-03)
EN 301 908-1 V5.2.1(2011-05)
EN 301 908-2 V5.2.1(2011-07)
EN 301 893 V1.6.1(2011-11)
EN 50360:2001
EN 62479:2010
EN 62311:2008
EN 50566:2013/AC:2014
EN 62209-1:2006
EN 62209-2:2010
ASUS Phone
Model adı :
Aşağıdaki direktiflerin gereksinimlerine uyduğunu deklare ederiz:
se encontra em conformidade com as exigências essenciais das seguintes directrizes:
EN 55022:2010+AC:2011
EN 61000-3-2:2014
EN 55013:2001+A1:2003+A2:2006
Ürün adı :
Should you have any questions or comments regarding
this matter, please contact us.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF
ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS
MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND
ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.
ZenTalk Fans Forum
(http://www.asus.com/zentalk/global_forward.php)
CEO
Jerry Shen
İmza : __________
15060-61700000

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res
Tagged PDF                      : Yes
Page Count                      : 2
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2015:09:25 15:35:52+08:00
Metadata Date                   : 2015:09:25 15:35:59+08:00
Modify Date                     : 2015:09:30 17:26:45+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:a0dcc062-c0fa-4597-a481-7801c2a2639e
Original Document ID            : xmp.did:56477ECB29A1E411AC55B9AF3A574922
Document ID                     : xmp.id:190FD9F85763E511A2C2BD651B3AED76
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:180FD9F85763E511A2C2BD651B3AED76
Derived From Document ID        : xmp.did:366B2319E113E511BDD5F8BDF7A91469
Derived From Original Document ID: xmp.did:56477ECB29A1E411AC55B9AF3A574922
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:09:25 15:35:52+08:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Creator                         : Adobe InDesign CS6 (Windows)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSQZ00XS

Navigation menu