ASUSTeK Computer Z01BDC ASUS phone User Manual

ASUSTeK Computer Inc ASUS phone

User Manual

E11896User Guide
Second Edition/ July 2016Model:ASUS_Z01BD(ZC551KL) ASUS_Z01BDA for TW/JP/HK/PH ASUS_Z01BDB for IN/ID/TH ASUS_Z01BDC for US/BR ZC551KL for RUBefore you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.NOTE: For the latest updates and more detailed information, please visit www.asus.com.Front featuresTouch screen displayReceiverLED indicatorTouch keysFront cameraProximity sensor and light sensor
Side featuresPower keyAudio jackMicro USB portVolume keySpeakerMicro SIM, Nano SIM/ microSD combo card slotNOTES:• TheMicroSIM/NanoSIMcardslotssupportLTE, WCDMA and GSM/EDGE network bands. • ThemicroSDcardslotsupportsmicroSDandmicroSDHC card formats.MicrophoneMicrophone
Rear featuresRear cameraRear coverLaser focusFingerprint sensorRGB sensor / Camera ash
Charging your ASUS PhoneTo charge your ASUS Phone:1. Connect the USB connector into the power adapter’s USB port.2. Connect the other end of the micro USB cable to your ASUS Phone. 3. Plug the power adapter into a wall socket.NOTES:• Useonlythepoweradapterthatcamewithyourdevice. Using a different power adapter may damage your device.• UsingthebundledpoweradapterandASUSPhone signal cable to connect your ASUS Phone to a power outlet is the best way to charge your ASUS Phone.• UsetheASUS5WpoweradapterandASUSUSBcable to get the best fast-charge experience when your ASUS Phone is in sleep mode.• Theinputvoltagerangebetweenthewalloutletand this adapter is AC 100V - 240V. The output voltage of the micro USB cable is +5.2V 1A, 5W. IMPORTANT!• WhenusingyourASUSPhonewhileitispluggedto a power outlet, the grounded power outlet must be near to the unit and easily accessible.• WhenchargingyourASUSPhonethroughyourcomputer, ensure that you plug the micro USB cable to your computer’s USB 2.0 / USB 3.0 port.• AvoidchargingyourASUSPhoneinanenvironment with ambient temperature of above 35 °C (95 °F). 312
1. Push a pin into the hole on the Micro SIM / Nano SIM / MicroSD card tray to eject it.2. Insert the Micro SIM / Nano SIM or MicroSD card(s) into the card slot(s).Micro-SIM1Nano-SIM2Micro-SIM1Micro SDIMPORTANT: You can only use the Nano SIM card or the MicroSD card at a time.Installing a Micro SIM / Nano SIM /MicroSD cardTo install a Micro SIM / Nano SIM / MicroSD card:
3. Push the tray to close itIMPORTANT: Both Micro SIM and Nano SIM card slots support 3G WCDMA and 4G LTE network bands. But only one SIM card can connect to 3G WCDMA / 4G LTE service at a time.CAUTION!• Donotusesharptoolsorsolventonyourdevice to avoid scratches on it. • UseonlyastandardmicroSIMcardonyourASUS Phone. A nano to micro SIM adapter oratrimmedSIMcardmaynotproperlytinto and may not be detected by your ASUS Phone.• DO NOT install an empty nano to micro SIM adapter into the micro SIM card slot to avoid irreversible damage.
Federal Communications Commission StatementThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changesormodicationsnotexpresslyapprovedbythe party responsible for compliance could void the user‘s authority to operate the equipment.The antenna(s) used for this transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorientorrelocatethereceivingantenna.• Increasetheseparationbetweentheequipment and receiver.• Connecttheequipmentintoanoutletonacircuit different from that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnician for help.The country code selection is for non-US models only and is not available to all US models. Per FCC regulation, all WiFi products that are marketed in US mustbexedtoUS-operatedchannelsonly.The FCC ID: for this device is MSQZ01BDC.Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:(1) This device may not cause interference; and(2) This device must accept any interference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.CAN ICES-3(B)/NMB-3(B)This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.The IC ID for this device is 3568A-Z01BDC.L’identiantIndustrieCanadadecetappareilest:3568A-Z01BDC.
This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter, except tested built-in radios. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.The County Code Selection feature is disabled for products that are marketed in the US/ Canada.La fonction de sélection de l’indicatif du pays est désactivée pour les produits commercialisés aux États-Unis et au Canada.FOR PORTABLE DEVICE (<20cm from body / SAR needed)Radiation Exposure Statement:The product complies with the Canada portable RF exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. RF exposure can be reduced further if the product can be kept as far as possible from the user body or if it is set to a lower output power, if such function is available. Additional statement for phones:This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels are below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 1 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.
Déclaration d’exposition aux radiations:Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis et le Canada établies pour un environnement non contrôlé. Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux expositions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible du corps de l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction est disponible.Additional statement for phones:Ce dispositif a été testé pour la conformité avec les valeurs SAR à un fonctionnement typique près du corps . Pour assurer que les niveaux d’exposition aux radiofréquences en deçà des niveaux testés , utiliser des accessoires avec cet équipement pour maintenir une distance de séparation minimale de 1 cm entre le corps de l’utilisateur et l’appareil. Ces accessoires ne doivent pas contenir des composants métalliques . Il est possible que les accessoires utilisés près du corps qui ne répondent pas à ces exigences ne sont pas compatibles avec les limites SAR et il est conseillé d’éviter de les utiliser.
RF Exposure Information (SAR)This device has been tested and meets applicable limits for Radio Frequency (RF) exposure. SpecicAbsorptionRate(SAR)referstotherateatwhich the body absorbs RF energy. SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries that follow the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries that follow the Council of the European Union limit. Tests for SAR are conducted using standard operating positions withthedevicetransmittingatitshighestcertiedpower level in all tested frequency bands. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep this device from your head and body. Carry this device at least 10 mm away from your body to ensure exposure levels remain at or below the as-tested levels. Choose the belt clips, holsters, or other similar body-worn accessories which do not contain metallic components to support operation in this manner. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that hasnotbeentestedorcertied,andusesuchaccessories should be avoided.The highest FCC SAR value for the device is 1.19W/kg @ 1g.The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.SARinformationonthisdeviceisonlewith the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: MSQZ01BDC.
CE RF Exposure ComplianceThis device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general publictoelectromagneticeldsbywayofhealthprotection.For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 0.5 cm to the body, whiletransmittingatthehighestcertiedoutputpower level in all frequency bands of this device. Use of other accessories which contain metals may not ensure compliance with ICNIRP exposure guidelines.CLASS 1 LASER PRODUCTCE Mark WarningCE marking for devices with wireless LAN/ BluetoothThis equipment complies with the requirements of Directive 1999/5/EC of the European Parliament and Commission from 9 March, 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity.The highest CE SAR values for the device are as follows:• 0.430W/kg@10g(Head)• 0.898W/kg@10g(Body)Laser safety information
Using GPS (Global Positioning System) on your ASUS PhoneTo use the GPS positioning feature on your ASUS Phone:• Ensure that your device is connected to the Internet before using Google Map or any GPS-enabled apps.• Forrst-timeuseofaGPS-enabledapponyour device, ensure that you are outdoors to get the best positioning data.• When using a GPS-enabled app on your device inside a vehicle, the metallic component of the car window and other electronic devices might affect the GPS performance.Prevention of Hearing LossTo prevent possible hearing damage, do not listen at high volume levels for long periods.For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2013 and/or EN50332-2:2013 standard required by French Article L.5232-1.
Safety informationASUS Phone care• UseyourASUSPhoneinanenvironmentwithambient temperatures between 0 °C (32 °F) and 35 °C (95 °F).The batteryYour ASUS Phone is equipped with a high performance non-detachable Li-polymer battery. Observe the maintenance guidelines for a longer battery life.• Donotremovethenon-detachableLi-polymerbattery as this will void the warranty.• Avoidcharginginextremelyhighorlowtemperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C.• Donotremoveandreplacethebatterywithanon-approved battery.• Donotremoveandsoakthebatteryinwaterorany other liquid.• Nevertrytoopenthebatteryasitcontainssubstances that might be harmful if swallowed or allowed to come into contact with unprotected skin.• Donotremoveandshort-circuitthebattery,asitmayoverheatandcauseare.Keepitawayfrom jewelry or metal objects.• Donotremoveanddisposeofthebatteryinre.Itcouldexplodeandreleaseharmfulsubstances into the environment.• Donotremoveanddisposeofthebatterywithyour regular household waste. Take it to a hazardous material collection point.• Donottouchthebatteryterminals.
NOTES:• Riskofexplosionifbatteryisreplacedbyanincorrect type.• Disposeofusedbatteryaccordingtotheinstructions.The charger• UseonlythechargersuppliedwithyourASUSPhone.• Neverpullthechargercordtodisconnectitfrom the power socket. Pull the charger itself.CautionYour ASUS Phone is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the (1) AC Adapter.• DonotusetheASUSPhoneinanextremeenvironment where high temperature or high humidity exists. The ASUS Phone performs optimally in an ambient temperature between 0 °C (32 °F) and 35 °C (95 °F).• DonotdisassembletheASUSPhoneoritsaccessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shockorremayresult.• Donotshort-circuitthebatteryterminalswithmetal items.Operator access with a toolIf a TOOL is necessary to gain access to an OPERATOR ACCESS AREA, either all other compartments within that area containing a hazard shall be inaccessible to the OPERATOR by the use of the same TOOL, or such compartments shall be marked to discourage OPERATOR access.
ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling information in different regions.Regional notice for SingaporeThis ASUS Phone complies with IDA Standards.
Proper disposalRisk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.DO NOT throw the battery in municipal waste. The symbol of the crossed out wheeled bin indicates that the battery should not be placed in municipal waste.DO NOT throw this product in municipal waste. This product has been designed to enable proper reuse of parts and recycling. The symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment and mercury-containing button cell battery) should not be placed in municipal waste. Check local regulations for disposal of electronic products.DONOTthrowthisproductinre.DO NOT short circuit the contacts. DO NOT disassemble this product.WARNING! This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.
EU Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : ASUS Phone Model name : ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA The object of the declaration described above is in conformity with the relevant Union harmonisation legislation: EMC – Directive 2004/108/EC (until April 19th, 2016) and Directive 2014/30/EU (from April 20th, 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Directive 1999/5/EC EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD – Dir ective 2006/95/EC (until April 19th, 2016) and Directive 2014/35/EU (from April 20th, 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Ecodesign – Directive 2009/125/EC Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 RoHS – Directive 2011/65/EU Ver. 160217 CE marking Equipment Class 1 0560 Signature Jerry Shen Printed Name CEO Position Taipei, Taiwan Place of issue 1/8/2016 Date of issue 2016 Year CE marking was first affixed (EU conformity marking) Declaração CE de Conformidade Nós, os abaixo-assinados, Fabricante: ASUSTeK COMPUTER INC. Endereço: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado na Europa: ASUS COMPUTER GmbH Endereço, cidade: HARKORT STR. 21-23, 40880 RATINGEN País: GERMANY declaramos o seguinte aparelho: Nome do produto: ASUS Phone Nome do modelo: ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA O objeto da declaração acima descrito está em conformidade com a legislação de harmonização da União aplicável: EMC Diretiva 2004/108/CE (até 19 de abril de 2016) e Diretiva 2014/30/UE (a partir de 20 de abril de 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Diretiva 1999/5/CE EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD Diretiva 2006/95/CE (até 19 de abril de 2016) and Diretiva 2014/35/UE (a partir de 20 de abril de 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 EcoEcodesign – Diretiva 2009/125/CE Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 RoHS – Diretiva 2011/65/UE Ver. 160217 Marcação CE Classe de equipamento 1 0560 Assinatura Jerry Shen Nome impresso CEO Posição Taipei, Taiwan Local de emissão 1/8/2016 Data de emissão 2016 Ano marcação CE foi aposta por primeira vez (Marcação CE de conformidade)
Declaraţie de conformitate UE Subsemnatul, Producător : ASUSTeK COMPUTER INC. Adresă: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Reprezentant autorizat în Europa: ASUS COMPUTER GmbH Adresă, Oraş: HARKORT STR. 21-23, 40880 RATINGEN Ţară: GERMANIA declară următorul aparat: Nume Produs : ASUS Phone Nume Model : ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA Obiectul declarației descris mai sus este în conformitate cu legislația relevantă de armonizare a Uniunii : CEM – Directiva 2004/108/CE (până în 19 Aprilie 2016) şi Directiva 2014/30/UE (până în 20 Aprilie 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Directiva 1999/5/CE EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD – Dir ectiva 2006/95/CE (până în 19 Aprilie 2016) şi Directiva 2014/35/UE (până în 20 Aprilie 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Ecodesign – Directiva 2009/125/CE Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 RoHS – Directiva 2011/65/UE Ver. 160217 Marcajul CE Echipament Clasa 1 0560 Semnătură Jerry Shen Nume CEO Funcţie Taipei, Taiwan Locul emiterii 1/8/2016 Data emiterii 2016 Anul în care Marcajul CE a fost aplicat pentru prima oară (Marcaj de conformitate UE ) EU Uygunluk Beyanı Biz, bu imza altındakiler Üretici: ASUSTeK COMPUTER INC. Adres: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Avrupa’daki Yetkili: ASUS COMPUTER GmbH Adres, Şehir: HARKORT STR. 21-23, 40880 RATINGEN Ülke: ALMANYA Aşağıdaki ürünleri beyan ediyoruz : Ürün adı : ASUS Phone Model adı : ASUS_Z01BD Yukarıda belirtilen beyanın konusu birlik yasalarına göre uygundur: EMC – Direktif 2004/108/EC 19 Nisan 2016’ya kadar ve Direktif 2014/30/EU 20 Nisan 20 16 EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Direktifi 1999/5/EC EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD – Direktifi 2006/95/19 Nisan 2016’ya kadar ve Direktif 2014/35/EU 20 Nisan 2016 EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Ecodesign – Direktif 2009/125/EC Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 RoHS – Direktifi 2011/65/EU Ver. 160217 CE işareti Ekipman Sınıfı 1 0560 İmza Jerry Shen Basılı Ad CEO Pozisyonu Taipei, Taiwan Sürüm yeri 1/8/2016 Sürüm tarihi 2016 CE işaretinin ilk eklendiği yıl (EU uygunluk işareti)
DECLARATION UE DE CONFORMITE Nous, soussignés Fabricant: ASUSTeK COMPUTER INC. Adresse: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Représentant autorisé en Europe: ASUS COMPUTER GmbH Adresse, ville: HARKORT STR. 21-23, 40880 RATINGEN Pays: GERMANY Déclarons l’appareil suivant: Nom du produit : ASUS Phone Nom du modèle : ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA L’objet de la déclaration décrit ci-dessus est conforme avec la législation d’harmonisation de l’Union applicable Directive CEM 2004/108/CE (jusqu’au 19 avril 2016) et la directive 201 4/30/UE (à partir du 20 avril 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 Directive R&TTE 1999/5/CE EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 Directive LVD 2006//125/CE (jusqu’au 19 avril 2016) et la directive 2014/34/UE (à partir du 20 avril 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Directive écoconception 2009/125/CE Regulation (CE) No. 1275/2008 Regulation (CE) No. 642/2009 Regulation (CE) No. 278/2009 Regulation (UE) No. 617/2013 Directive RoHS 2011/65/UE Ver. 160217 Marquage CE Equipement de classe 1 0560 Signature Jerry Shen Nom en caractères d’imprimerie CEO Position Taipei, Taiwan Lieu de délivrance 1/8/2016 Date d'Emission 2016 Année où commence l’apposition du marquage CE (Marquage UE de conformité) EU Konformitätserklärung Hiermit erklären wir, Hersteller: ASUSTeK COMPUTER INC. Anschrift: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Bevollmächtigter: ASUS COMPUTER GmbH Anschrift des Bevollmächtigten: HARKORT STR. 21-23, 40880 RATINGEN Land: GERMANY dass nachstehend bezeichnete Produkte Produktbezeichnung ASUS Phone Modellbezeichnung: ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA mit den nachstehend angegebenen, für das Produkt geltenden Richtlinien/Bestimmungen übereinstimmen: EMV – Richtlinie 2004/108/EG (bis 19. April 2016) und Richtlinie 2014/30/EU ( ab 20. April 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Richtlinie 1999/5/EG EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD – Richtlinie 2006/95/EG (bis 19. April 2016) und Richtlinie 2014/35/EU (ab 20. April 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Ökodesign – Richtlinie 2009/125/EG Verordnung (EG) No. 1275/2008 Verordnung (EG) No. 642/2009 Verordnung (EG) No. 278/2009 Verordnung (EU) No. 617/2013 RoHS – Richtlinie 2011/ 65 /EU Ver. 160217 CE Kennzeichen Geräteklasse 1 0560 Unterschrift Jerry Shen Name CEO Position Taipei, Taiwan Ort 1/8/2016 Datum 2016 Jahr der Kennzeichenvergabe (EU Konformitätszeichen)
UE Declaración de Conformidad Nosotros, los abajo firmantes, Fabricante: ASUSTeK COMPUTER INC. Dirección: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Representante autorizado en Europa: ASUS COMPUTER GmbH Dirección, Ciudad: HARKORT STR. 21-23, 40880 RATINGEN País: GERMANY Declaramos el siguiente producto: Nombre del aparato : ASUS Phone Nombre del modelo : ASUS_Z01BD, ASUS_Z01BDB, ASUS_Z01BDA El objeto de la declaración descrita anteriormente es conforme con la legislación de armonización pertinente de la Unión: EMC Directiva 2004/108/CE (hasta el 19 de abril, 2016) y Directiva 2014/30/UE (desde el 20 de abril, 2016) EN 55022:2010+AC:2011 EN 61000-3-2:2006+A2:2009 EN 55013:2001+A1:2003+A2:2006 EN 55024:2010 EN 61000-3-3:2013 EN 55020:2007+A11:2011 R&TTE – Directiva 1999/5/CE EN 300 328 V1.9.1(2015-02) EN 300 440-1 V1.6.1(2010-08) EN 300 440-2 V1.4.1(2010-08) EN 301 511 V9.0.2(2003-03) EN 301 908-1 V7.1.1 EN 301 908-2 V6.2.1(2013-10) EN 301 908-13 V6.2.1(2013-10) EN 300 330-2 V1.5.1(2010-02) EN 50360:2001/A1:2012 EN 62479:2010 EN 62209-1:2006 EN 62209-2:2010 EN 301 489-1 V1.9.2(2011-09) EN 301 489-3 V1.6.1(2013-12) EN 301 489-4 V2.1.1(2013-12) EN 301 489-7 V1.3.1(2005-11) EN 301 489-9 V1.4.1(2007-11) EN 301 489-17 V2.2.1(2012-09) EN 301 489-24 V1.5.1(2010-10) EN 301 357-2 V1.4.1(2008-11) EN 302 291-2 V1.1.1(2005-07) EN 50385:2002 EN 50566:2013/AC:2014 EN 62311:2008 LVD Directiva 2006/95/CE (hasta el 19 de abril, 2016) y Directiva 2014/35/UE (desde el 20 de abril, 2016) EN 60950-1: 2006 / A12: 2011 EN 60950-1: 2006 / A2: 2013 EN 60950-1: 2006 / A11: 2009 EN 60950-1: 2006 / A1: 2010 Diseño Ecológico – Directiva 2009/125/CE Regulation (EC) No. 1275/2008 Regulation (EC) No. 642/2009 Regulation (EC) No. 278/2009 Regulation (EU) No. 617/2013 RoHS – Directiva 2011/65/UE Ver. 160217 Marcado CE Clase de equipo 1 0560 Firma Jerry Shen Nombre impreso CEO Posición Taipei, Taiwan Lugar de emisión 1/8/2016 Fecha de emisión 2016 Año en que se colocó el marcado CE por primera vez (marcado CE de conformidad) DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont, CA 94539. Phone/Fax No: (510)739-3777/(510)608-4555 hereby declares that the product Product Name : ASUS Phone Model Number : ASUS_Z01BDC Conforms to the following specifications: FCC Part 15, Subpart B, Unintentional Radiators Supplementary Information: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Representative Person’s Name : Steve Chang / President Signature : Date : Aug. 12, 2016 Ver. 140331
Copyright © 2016 ASUSTeK COMPUTER INC.All Rights Reserved.You acknowledge that all rights of this Manual remain with ASUS. Any and all rights, including without limitation, in the Manual or website, and shall remain the exclusive property of ASUS and/or its licensors. Nothing in this Manual intends to transfer any such rights, or to vest any such rights to you.ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND. SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS.ASUSAddress: 4F, 150 LI-TE RD., PEITOU, TAIPEI, TAIWANTel: 886228943447Fax: 886228907698DeclarationWe declare that the IMEI codes for this product, ASUS Phone, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards.Should you have any questions or comments regarding this matter, please contact us.Sincerely yours,ASUSTeK COMPUTER INC.Tel: 886228943447Fax: 886228907698Support: http://vip.asus.com/eservice/techserv.aspxZenTalk Fans Forum (http://www.asus.com/zentalk/global_forward.php)15060-79800200

Navigation menu