Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 521211 |
| Application ID | mlmO6zjJA43CoVTIuBW0gA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 150.82kB (1885243 bits) |
| Date Submitted | 2005-03-07 00:00:00 |
| Date Available | 2005-03-07 00:00:00 |
| Creation Date | 2005-03-07 18:33:14 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2005-03-07 18:33:14 |
| Document Title | TV ì¨íš‡ì¨ˆì¨˜ì©ì²˜20.1횉체b77ì¨‰í„ |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | 쨔횑íšì²© |
FCC Compliance Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are intended to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment a receiver. - Connect the equipment to an outlet in a circuit different from that to which the receiver is connected. - consult the dealer or an experienced radio / TV technician for help. WARNING Changes or modifications not expressly approved by the manufacturer may void the user’s authorization to operate the equipment. Before Use This user manual contains proprietary information that is protected by copyright. All rights are reserved. No part of this user manual may be reproduced, photocopied, transcribed, translated or transmitted in whatsoever form without the prior permission of the manufacturer. The size and appearance of this LCD display may be changed without notice for the purpose of improvement. Damage caused by using unauthorised components, and non-compliance with the information and cautions in this user manual, is not covered by the warranty. If you have a problem with your LCD display, please check the Troubleshooting section in this user manual before request help from a service centre. The information in this user manual is subject to change without notice. If static images are displayed on the LCD for a prolonged period, the LCD display may show screen image retention. This is not a permanent condition and the image will fade in time. Image retention is a condition that may occur with all LCD displays. The LCD consists of about 5 million pixels. One pixel incorporates 3 dots, and some of the dots may be perceived as brighter or darker compared to others. Please note that this may occur on all LCD displays and is not a product defect. Accessories After opening the box, make sure the following items are provided with the monitor. If you find that any of these items are missing or appear damaged, contact your dealer immediately. LCD display User’s Manual Remote Control /Batteries(1.5V AAA type) Power Cable D/C Power Supply Unit 75 Antenna-extensible Coaxial Cable Shapes and colours of parts are subject to change without prior notice, but their functions remain unchanged. Specifications AV201 Panel Panel Type 20.1 (51cm) TFT Color LCD Display Area 408.0mm 306.0mm Display Color 16.7million Pixel Pitch 0.6375mm 0.6375mm Recommended Resolution 1280 x 768 Contrast Ratio 350:1(Typical) In/Out Brightness 450 cd/m2 Viewing Angle H: 140 V: 120 Scanning frequency H: 31~69kHz Resolution 640X480(VGA) V: 56~85Hz PC Analog RGB 15 pin D-Sub Video Composite Input PC Audio Input S-Video Input DVD(Y, Pb, Pr) Input Audio Composite Input DVD Input Head-phone Out Speaker Output TV Signal Euro A/V SCART Antenna 75 ohm Coaxial cable Color System PAL/SECAM NTSC Other Sound System B/G, D/K, I, L/L, M Stereo Type NICAM, A2 MTS Text TELETEXT V-Chip NO Certifications UL, FCC, CE Power Consumption 50 watts Power Save Mode 3 watts Speaker 5 watts Plug & Play DDC 1/2 B Screen Control OSD (On Screen Display Menu) Weight Power Supply DC 15 Volts Remote control Yes Dimensions 559.5mm(w) 422.5mm(H) 146.5mm(D) LCD Display Overview Front View Built-in Speaker The built-in speaker allows you to enjoy sounds without external speakers. Power Indication Lamp/Remote Controller Receiver If the AC adaptor is connected, the red lamp is on, and if the TV power is turned on, the green lamp is on. There is also a function to receive radio waves emitted from the remote controller. Power Button Turns power On/Off from standby mode. (Turns On/Off the LCD display) Buttons Press or to change channels. Also used to select OSD(On Screen Display) menu. (PC : Auto position) +/- Buttons Press the +(increase) or -(decrease) the volume. Also used to increase or reduce the value of a OSD menu. MENU Button Display the main OSD menu. Exit from sub-menu. T/V Button Select Input Sources (TV, Video, S-Video, DVD and PC). Rear View Head Phone Connect with a headphone. ANT Connect with an external cable from the external antenna (VHF/UHF antenna, cable TV antenna, and satellite antenna). SCART(Optional) Connect PAL-method TV Audio/Video. POWER IN Connect the DC power adapter. AV-IN S-VIDEO : Connect to the S-Video input terminal from VCR (or DVD Player). COMPOSITE : Connect with composite video input terminal from VCR (or DVD Player). Audio L/R : Connect with the Audio-Left/Right cable from VCR (or DVD Player). COMPONET Y, Pb, Pr : Connects to the Video Input Terminal from VCR (or DVD Player). Audio L/R : Connects to the Audio-Left/Right cable from VCR (or DVD Player). PC-IN Audio IN : Connect PC Sound Output. ANALOG RGB : Connect analog RGB Signal from PC. Note To connect the LCD display to external device, remove the rear cover by pushing slightly as following. Tilting The LCD display has tilt angle of about 0 ~ 30 relative to vertical axis. Remote control Inserting the batteries in the Remote control You must insert or replace the batteries in the remote control. 1 Open the cover. dry cells with the 2 Insert correct polarity (+, -). 3 Close the cover. Note Do not insert the batteries with the wrong polarity. Do not put spent batteries in a fire. Do not leave completely-used batteries in the remote control. Leaving them in place for a long time may cause corrosion of the electrodes in the remote control. Replace the batteries with new ones if the remote control does not work properly. Information on the Use of the Remote control When using the remote control, point it towards the remote control receiving part of the LCD Display. The operating distance should be within 7m. The receiving angle should be within 30 degrees. Note Do not subject the remote control to shock. It may get damaged. Be careful not to let water get into the remote control. It may cause damage Do not dismantle the remote control. Do not expose the remote control to direct sunlight or other strong light. The remote control may not work properly. Do not keep in cold or humid places. It may cause defects. Remote control Button Functions Turns the display On or Off. 22 21 19 20 19 10 11 12 13 14 MUTE Press to temporarily cut off the sound. POWER NOT USED Direct channel select. Direct page selection during Teletext display. 18 17 MTS Press to choose stereo, dual or mono. 16 15 NOT USED NUMBER MENU Display OSD Menu. VOL Increases or decreases the volume. Also used to select the OSD main menu, to select the submenu or to change the values in sub-menus. 7 FLASHBACK 11 Displays a secondary page. Moves to the previous TV Channel. It is a Quick Search function. Teletext 12 RED : Converts to the Page linked to the RED Key. GREEN : Converts to the Page linked to the GREEN Key. YELLOW : Converts to the Page linked to the YELLOW Key. BLUE : Converts to the Page linked to the BLUE Key. TV 13 Selects TV signal. Teletext (option) Off. 10 VID HOLD(option) Maintain the Page content as currently displayed, if it has been changed. FLOP/LIST(option) Exchanges FLOP/LIST mode. 14 Press to display all available video sources (i.e., Video, S-video and DVD). INFO/INDEX(option) Converts from the current Page to the INDEX Page. 15 Select video source (Video (composite), S-video and DVD (composite)). SUB-PAGE(option) REVEAL(option) Shows letters that are hidden (not displayed), even though they are included in the currently displayed Page. 2 16 STORE(option) Stores the current Page 22 21 19 20 19 10 11 12 13 14 17 PC Selects PC signal. NOT USED 18 17 16 15 NOT USED PAL/ SECAM MODEL ONLY 18 TTX/MIX(option) TTX : Teletext On/Off MIX : Displays the Page currently being displayed together with images 19 CH , TELETEXT PREVIOUS/NEXT PAGE 21 Sets SLEEP reservation time. When the reserved time comes, the apparatus is automatically turned off. Press or to change channels. Also used to select in the OSD menu or select the channel providing teletext service. 20 SEL Select sub-menu or fix user setting. SLEEP 22 -/--(+100) Select channels with the number over 100. Connecting to Watch LCD Display, VCR or DVD Connecting the Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of following sources: An outdoor aerial An indoor aerial (not recommendable) A cable television network In the first three cases, connect the aerial or network input cable to the 75 ohm coaxial socket on the rear of the TFT LCD display. Press the TV button on the remote control. Connecting the VCR, DVD or Other External Devices A type To connect COMPOSITE VIDEO B type To connect S-VIDEO C type To connect TV, VCR Connect a set of audio cables between the component AUDIO IN jacks of the LCD Display and the AUDIO OUT jacks of the DVD Player. When an external device is in MONO, the audio connection cable should be connected to ‘AUDIO L’ jack and S.MODE/MTS should be set MONO. Connect video cables between the Y, Pb and Pr inputs on the LCD Display and the Y, Pb and Pr outputs on the DVD Player. Connecting a DVD Player (Connecting to Y, Pb, Pr) Connect a set of audio cables between the component AUDIO IN jacks of the LCD Display and the AUDIO OUT jacks of the DVD Player. Connect video cables between the Y, Pb and Pr inputs on the LCD Display and the Y, Pb and Pr outputs on the DVD Player. (Note : For an explanation of component video, see your DVD Player’s manual.) Connecting to SCART (Option) Instead of the COMPOSITE or S-VIDEO, SCART can be used if the external devices provide it. Referring to the user manual of the external device, connect the SCART cable as follows. Connecting to a PC Turn off your computer and LCD Display. Connect a PC D-Sub cable between your PC and the PC-VIDEO-IN of the LCD Display. Then fasten the screws on both sides of the cable. Connect a PC Audio Cable between the Sound Output Jack of the sound card on the PC and the PC-AUDIO-IN of the LCD Display. Power on the computer before turning on the LCD Display. Menu Tree TV Menu Types and Items (PAL/SECOM) Menu Items BRIGHTNESS BRIGHTNESS /CONTRAST CONTRAST COLOR CHANNEL SHARPNESS Adjusts color intensity (with reference to white) COLOR Adjusts screen color saturation TINT AUTO PROGRAM Tunes channels automatically SYSTEM : STORAGE FROM : START : MANUAL PROGRAM PROGRAM EDIT SETUP Items Description Adjusts screen brightness Adjusts screen contrast Adjusts screen sharpness OSD POSITION OSD TIME LANGUAGE INPUT SOURCE Stores channels manually SYSTEM : CHANNEL : FINE : SEARCH : NAME : STORE : Manually memorize or erase the TV or CABLE channel. Selects a position for the OSD screen Adjusts the time taken for the OSD menu screen to disappear Selects a language for the OSD menu Select an input source as appropriate for the following: ANALOG : When connected to a PC via an analog connector (D-sub). S-VIDEO : S-VHS signal input COMPOSITE : COMPOSITE signal input TUNER : When connected to a TV. COMPONENT : COMPONENT (Y, Pb, Pr) input signal SCART : SCART input signal AUDIO EXIT BASS TREBLE BALANCE Adjusts bass Adjusts treble Adjusts balance AUDIO MODE Selects the desired sound setting (Sports, Movie, Music) Exits OSD Setup TV Menu Types and Items (NTSC) Menu Items BRIGHTNESS BRIGHTNESS /CONTRAST CONTRAST COLOR CHANNEL SHARPNESS COLOR TINT AIR/CATV AUTO CHANNEL MANUAL CHANNEL FINE SETUP OSD POSITION OSD TIME LANGUAGE INPUT SOURCE Items Description Adjusts screen brightness Adjusts screen contrast Adjusts screen sharpness Adjusts color intensity (with reference to white) Adjusts screen color saturation AIR : Selects when watching the air TV. CATV : Selects when watching the CATV. Automatically memorize the active TV or CABLE channels. START : Starts detecting the active channels. STOP : STops detecting the active channels. Manually memorize or erase the TV or CABLE channel. DEL : Delete channel number. ADD : Add channel number. Adjust when the display color is blur or unfocused. Selects a position for the OSD screen Adjusts the time taken for the OSD menu screen to disappear Selects a language for the OSD menu Select an input source as appropriate for the following: ANALOG : When connected to a PC via an analog connector (D-sub). S-VIDEO : S-VHS signal input COMPOSITE : COMPOSITE signal input TUNER : When connected to a TV. COMPONENT : COMPONENT (Y, Pb, Pr) input signal AUDIO BASS TREBLE BALANCE AUDIO MODE SAP EXIT Adjusts bass Adjusts treble Adjusts balance Selects the desired sound setting (Sports, Movie, Music) Set status to SAP(Second Audio Program) to receive audio simul casts in other lauguages.(ON/OFF) Exits OSD Setup PC Menu Types and Items Menu Items BRIGHTNESS BRIGHTNESS /CONTRAST CONTRAST COLOR POSITION SETUP Items Description Adjusts screen brightness Adjusts screen contrast Controls color (Red, Green, Blue) of the display. RED Changes the of red level. GREEN Changes the of green level. BLUE Changes the of blue level. HORIZONTAL Adjusts the horizontal position of the display VERTICAL Adjusts the vertical position of the display CLOCK Increases or decreases the number of pixels to adjust the horizontal size. PHASE Adjusts the focus and sharpness of the display OSD POSITION OSD TIME LANGUAGE INPUT SOURCE Selects a position for the OSD screen Adjusts the time taken for the OSD menu screen to disappear Selects a language for the OSD menu Selects an input source as appropriate for the follows: ANALOG : When connected to a PC via an analog connector (D-sub). S-VIDEO : S-VHS signal input COMPOSITE : COMPOSITE signal input TUNER : When connected to a TV. COMPONENT : COMPONENT (Y, Pb, Pr) input signal SCART : SCART input signal AUDIO EXIT BASS TREBLE BALANCE Adjusts bass Adjusts treble Adjusts balance AUDIO MODE Selects the desired sound setting (Sport, Movie, Music) Exits OSD Setup To watch TV Power supply to the TV may be either 110 V or 220 V. Turn the TV on or off. (The power indicator turns red when power is connected to the LCD TV and turns green when thebutton is pressed.) Channel Change Button / Changes the channel. Also used to select a menu function. Volume Control Button / Adjusts the volume level while watching TV. Also used to navigate in the main menu To select the previous channel Pressing the button returns to the channel that you were viewing previously. Pressing the button on your remote control Pressing the button puts the TV in standby mode. Pressing the button one more time turns on the channel being viewed prior to switching to standby mode. To turn off the power completely, unplug the power cable from the power outlet. To mute sound button Press the button once to turn off the TV sound and press again to turn on the sound. Adjusting the Picture Settings Because display settings such as contrast, brightness, sharpness and color are set automatically when the LCD TV is shipped, there is no need for additional adjustment by the user. If you want re-set the display settings to your preference, please refer to the following instructions. Press the
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2005:03:07 18:33:14+09:00 Modify Date : 2005:03:07 18:33:14+09:00 Metadata Date : 2005:03:07 18:32:53+09:00 Creator Tool : PScript5.dll Version 5.2 Document ID : uuid:D17E72E1EB8ED9118EE3EDC6EEEA8C9B Instance ID : uuid:7c2ce1b6-b862-4183-8c4a-76a7a9e04ec8 Derived From Instance ID : uuid:2ef130b2-4c9e-4713-93f0-40ccb620dbf5 Derived From Document ID : uuid:d71a2300-b59d-4d94-b61f-6f7190489df6 Format : application/postscript Creator : 쨔횑횁첩 Title : TV 쨍횇쨈쨘쩐처20.1횉체b77쨉큄 Page Count : 56 Author : 쨔횑횁첩EXIF Metadata provided by EXIF.tools