ATEC AV370W 37" TFT LCD TV User Manual 2 of 3

ATEC Co., Ltd. 37" TFT LCD TV Users Manual 2 of 3

Contents

Users Manual 2 of 3

Watching TVTo configure the menuTo Configure TV ChannelsTo Select TV/External InputAdjusting the Picture Adjusting the SoundConfiguring the PIP/POP/PBP FunctionsTo Configure the SET UPExternal Control Device Setup
2-2Watching TVCheck the antenna connection. (For more information on connection, see‘1.4 Connecting the LCD TV and Peripheral Devices’.)1Press the power button on the rear panel of the LCD TV.2Press the <POWER> button on the remote control.3Press the <TV/AV> button on the remote control, and press the number buttonto select a channel (For example, if selecting channel no. 99, press the 9button twice on the remote control).4Press the < > button to adjust the volume.5
2-3Watching TVUsing the LCD TVN󳀏O󳀏T󳀏E ▶▶To mute the LCD TV soundPress the <MUTE> button on the remote control once to mute theLCD TV sound. Press the button once again to turn the sound backon.▶▶To completely turn off the LCD TV power. ❶Press the <POWER> button on the remote control. TheLCD TV will be turned off and remain in standby mode.❷Press the power button on the rear panel of the LCD TV (or unplug the power cord from the walloutlet).
2-4To configure the menuTo configure the LCD TV functions, press the [MENU] button. Knowing themethod for configuring the menu will make using the LCD TV much easier.Menu SettingsPress the power button on the rear panel of the LCD TV, and press the <POWER>button on the remote control.1Press the <MENU> button on the remote control.Press the < > button on the remote control to navigate to different menus.2<PICTURE> <SOUND> <PIP/POP/PBP><SET UP> <CHANNEL>
2-5To configure the menuUsing the LCD TVPress the <OK> button or the < > button on the remote control to select the menuto configure. Submenus will be available for each selection.3In the submenus, use the < > button on the remote control to navigate to differentitems. Use the < > button to make adjustments. When selecting PIP Source, use the< > button to make adjustments, and then press the <OK> button on the remotecontrol to make a selection (Select the ‘User’ item under the 'PSM’ submenu).4
Using the LCD TV2-6To configure the menuUse the < > button and the < > button on the remote control to adjust thesettings for different items. (For example, adjustment can be made of items such asBrightness, Contrast, Color, Sharpness, and Tint.)5When adjustments are complete, press the <OK> button once to close the adjustmentscreen. Press the <MENU> button once again to close the ‘Menu’ screen.6N󳀏O󳀏T󳀏E ▶▶To configure the menu without using the remote controller❶Press the <MENU> button located at the bottom of the LCD TV.❷Press the <CH ▲/▼> buttons to navigate to submenus.❸Press the <VOL <◀/ ▶> buttons to adjust each item.❹If ‘Menu for Local Key’ is on, the <SOURCE> button is used as the <OK> button. When adjustmentshave been completed, press the <MENU> button to close the ‘Menu’ screen.
2-7To configure the menuUsing the LCD TVMain MenuPICTUREPSM(Select ScreenView)DynamicStandardMildGameUserVivid Picture AppearanceStandard Picture AppearanceSofter Picture AppearanceSelect when playing video games on LCD TVBrightness : Adjust brightness. (Brightnessmeans the brightness of the screen.)Contrast : Adjust contrast. (Contrast meansthe difference in brightness between an objectand its background.)Colour : Adjust color (RGB).(Adjusting thecolor to make it look more natural.)Sharpness : Adjust sharpness.(Sharpnessmeans the sharpness of the object's profile.)Tint : Adjust color intensity.(Color intensityindicates color depth.)SOUNDEffectSurroundAVLBalanceFlat MusicMovieSpeechUserOffNormalSpatialOn/Off-10 ~ 10Standard factory settings.When watching music video or concerts.When watching movies.When watching a show that is mostly dialogue.Bass : Adjust bass.Treble : Adjust treble.Surround Output OffOptimal Surround for Output ConditionEnhanced SurroundAVL Function On/OffAdjust balance between the left & right speakers.Sub Menu 1 Sub Menu 2 Sub Menu 3TV Menu Categories and ItemsThe Main Menu contains 5 categories, which in turn contain submenus and option items:
Using the LCD TV2-8To configure the menuMain MenuSET UPLanguageTransparencyARCISM MethodSet IDFactory ResetTimerCaptionParentalEnglish, Deutsch, Français, Español, Italiano, Korean(Menu Screen Display Language Selection)0~1016:9, 14:9, 4:3NormalOrbitWhite0~99OffClockOff TimerOn TimerAuto OffTEXT 1~4OffCC1~4Lock On/OffMPAATV GuidelinesSet PasswordAdjusts the image transparencyScreen Aspect SelectionNormal screenMoves the screen up, down, left and right in small increments to prevent overheating of the panel during prolonged use.Sets the whole screen to white.Set ID SelectionSelects the factory default.AM, PMAM, PM, On/OffAM, PM, On/OffCHANNELVolumeOn/OffText function supportCaption function Off (when the subtitle function is provided)Closed Captioning function supportParental function On/OffMPAA(Motion Picture Association of America) Guideline setup availableTV Guidelines function supportPassword setup availableSub Menu 1 Sub Menu 2 Sub Menu 3 DescriptionTime SelectionTV Off Time SelectionTV On Time SelectionCATV/Air0~100TV Off Auto Function SelectionPIP/POP/PBPOn/Off OffPIPPOPPBP1~2PIP/POP/PBP Function OffSourceSwapPIP SizePIP PositionSourceSwapSourceSwapTV, AV1~AV3, Component1~2, RGB, DVI To Set Small, Large PIP Screen Position SelectionTV, AV1~AV3, Component1~2, RGB, DVITo Set TV, AV1~AV3, Component1~2, RGB, DVI To Set
2-9To configure the menuUsing the LCD TVMain MenuCHANNELAir/CATVAuto CH ProgressChannelAdd/Del ChannelFine TuneScan by broadcasting methodAutomatic channel scanScans the TV channels and registers the channels on airSaves the selected channelsManually fine tune the channels if the channel reception is not goodSub Menu 1 Sub Menu 2
2-10To Configure TV ChannelsTo watch TV with the LCD TV, configure the channels. (Always check the TVconnection before use.) To save TV channels, configure the channels during the broadcasting hours.Use Automatic Channel Scanning to save all the channels currently airing.Setting channels automaticallyPress the <MENU> button on the remote control, and press the < > button onthe remote control to navigate to the ‘Channel’ menu.1Press the < > button on the remote control to select the ‘Air/CATV’ submenu.Press the < > button on the remote control to select the broadcasting method(external input).2
2-11To Configure TV ChannelsUsing the LCD TVPress the < > button on the remote control to move to the ‘Auto CH Progress’submenu. At the ‘Auto CH Progress’ item, press the < > button on the remotecontrol to run ‘To Start’. Channels will be scanned and saved automatically.3Press the <MENU> button on the remote control, and press the < > button onthe remote control to navigate to the ‘CHANNEL’ menu.1Press the <MENU> button on the remote control to close the ‘Menu’ screen.4Storing the Channel Manually
Press the < > button on the remote control to move to the ‘Add/Del Channe’submenu. Press the < > button on the remote control to select ‘Add’ and press the<OK> button.Using the LCD TV2-12To Configure TV ChannelsPress the < > button on the remote control to move to the ‘Channel’submenu, and press the < > button to select the channel with the best videoquality from the channels found.23Press the <MENU> button on the remote control to close the ‘Menu’ screen.4
2-13To Configure TV ChannelsUsing the LCD TV
2-14To Select TV/External InputAn external input signal connected to the LCD TV can be selected for viewing.(VCR, DVD, Camcorder, etc.)Selecting an External Input Device Connected to the LCD TV for viewingPress the <SOURCE> button on the remote control.1The ‘MAIN SOURCE’ screen will be displayed. Press the < > button on the remote control toselect the external device connected to the LCD TV,and press the <OK> button.2LCD TV screen will be displayed when you playthe external input device.3Selecting External Input Device When Playing PIP/POP/PBPCheck the location of the external input device connected to the LCD TV, and select anappropriate item. (Connection with cable broadcast, connection with VCR, connection withDVD, connection with camcorder, etc.)Press the <MENU> button on the remote control.1N󳀏O󳀏T󳀏E ▶Press the <SOURCE> button at the bottom of the LCD TV to open the 'MAIN SOURCE’ screen.Use the CH ▲/▼button to navigate to the 'Connected External Device’ mode, and press the<SOURCE> button to make a selection.
2-15To Select TV/External InputUsing the LCD TVPress the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu,and press the < > button to navigate to the ‘On/Off’ submenu.2Press the < > button on the remote control. Option items will be displayed accordingto the items ‘PIP, POP, PBP1, and PBP2’.3Configure settings for each of the items PIP, POP, PBP1, and PBP2. Select the externalinput device connected to the LCD TV and configure the appropriate option item(PIP/POP/PBP).Using PIP Mode LCD TV Screen4
Using the LCD TV2-16To Select TV/External InputUsing POP ModeUsing PBP1 ModeLCD TV ScreenLCD TV ScreenUsing PBP2 Mode LCD TV Screen
2-17To Select TV/External InputUsing the LCD TVWhen option configuration for each item is complete, press the <OK> button on theremote control.5To swap between the main screen and the sub-screen when in PIP, POP, or PBP mode,press the <SWAP> button on the remote control.6
2-18Adjusting the Picture The LCD TV has been configured with optimal contrast, brightness, sharpness,colors, etc. by factory default, and there is no need for any further userconfiguration. However, if you wish to adjust the picture settings, follow theinstructions below.Press the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘PSM’ submenu. Pressthe < > button on the remote control to select options provided in PSM (PictureStandard Mode).2PSM (Picture Standard Mode) provides the following functions:●Standard : Standard Picture Appearance●Mild : Softer Picture Appearance●Game : Select this when playing video games on LCD TV.●Dynamic : Vivid Picture Appearance●User : Available user setting items are Brightness, Contrast, Colour, Sharpness, Tint, etc.3
2-19Adjusting the Picture Using the LCD TV- Brightness : Adjust brightness. (Brightness means the brightness of the screen.)- Contrast : Adjust contrast. (Contrast means the difference in brightness between an objectand its background.)- Color : Adjust color (RGB). (Adjusting the color to make it look more natural.)- Sharpness : Adjust sharpness. (Sharpness means the sharpness of the object's profile.)- Tint : Adjust color intensity. (Color intensity indicates color depth.)When configuration is complete, press the <OK> button on the remote control, and thenpress the <MENU> button on the remote control to close the ‘Menu’ screen.4
2-20Adjusting the SoundPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SOUND’ menu.2Press the < > button on the remote control to navigate to the ‘Effect’ submenu.Press the < > button on the remote control to select the options provided in ‘Effect’. When configuration is complete, press the <OK> button.- Flat : Standard factory settings.- Music : When watching music video or concerts.- Movie : When watching movies.- Speech : When watching a show that is mostly dialogue.- User : Available user setting items are Bass, Treble, etc.3
2-21Adjusting the SoundUsing the LCD TV●Bass : Adjusts bass●Treble : Adjusts treble- Off : Select this if not using the Surround output function.- Normal : Surround sound optimized to the output conditions will be used.- Special : Enhances the surround output.Press the < > button on the remote control to navigate to the ‘Surround’ submenu. Press the < > button on the remote control to select options provided in ‘Surround’. When configuration is complete, press the <OK> button.4
Using the LCD TV2-22Adjusting the SoundPress the < > button on the remote control to navigate to the ‘AVL’ submenu. Press the < > button on the remote control to select whether to use the ‘AVL’ function. When selection is complete, press the <OK> button.5Press the < > button on the remote control to navigate to the ‘Balance’ submenu. Press the < > button on the remote control to adjust ‘Left and Right Speaker SoundBalance’. When adjustment is complete, press the <OK> button.6When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.7
2-23Adjusting the SoundUsing the LCD TV
2-24Configuring the PIP/POP/PBP FunctionsTwo channels can be shown on the TV screen simultaneously. Available screendivision methods are PIP (Picture in a Picture), POP (Picture on a Picture), andPBP (Picture by a Picture).PIP Function SettingsPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.2Press the < > button on the remote control to navigate to the ‘On/Off’ submenu.Press the < > button on the remote control to select ‘PIP’. When configuration iscomplete, press the <OK> button.●Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).●Swap : Swap between the main screen and the sub-screen (To Set).●PIP size : Select the PIP screen size (Small or Large).●PIP position : Select the PIP screen position.3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.4
2-25Configuring the PIP/POP/PBP FunctionsUsing the LCD TVPOP Function SettingsPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.2PBP Function SettingsPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘PIP/POP/PBP’ menu.2Press the < > button on the remote control to navigate to the ‘On/Off’ submenu. Press the < > button on the remote control to select ‘POP’. When configuration iscomplete, press the <OK> button.●Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).●Swap : Swap between the main screen and the sub-screen (To Set).3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.4
Using the LCD TV2-26Configuring the PIP/POP/PBP FunctionsPress the < > button on the remote controller to navigate to the ‘On/Off’ submenu. Press the < > button on the remote controller to select ‘PBP1 or PBP2’. Whenconfiguration is complete, press the <OK> button.●Source : Select the external input source (TV, AV1~AV3, Component1~2, RGB, or DVI).●Swap : Swap between the main screen and the sub-screen (To Set).3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.4
2-27Configuring the PIP/POP/PBP FunctionsUsing the LCD TV
2-28To Configure the SET UPVarious functions for watching TV can be configured. (Language, Transparency, ARC, ISM Method, Timer, Caption, Parental etc.)Selecting the Main Screen LanguagePress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Adjusting Image TransparencyPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘Setup’ menu.2Press the < > button on the remote control to navigate to the ‘Language’submenu. Press the < > button on the remote control to select the preferredlanguage. When selection is complete, press the <OK> button.(English, Deutsch, Français, Español, Italiano, Korean)3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.4
2-29To Configure the SET UPUsing the LCD TVSelecting Screen ARCPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘POP/POP/PBP’ menu.2Select ‘Off’ in the ‘On/Off’ submenu, and press the <OK> button.3Press the < > button on the remote control to navigate to the ‘Transparency’submenu. Press the < > button on the remote control to adjust the ImageTransparency. When adjustment is complete, press the <OK> button (the settingspossible are 0~10).<Before Adjusting Image Transparency: 0> <After Adjusting Image Transparency: 10>3When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.4
Using the LCD TV2-30To Configure the SET UPPress the < > button on the remote control to navigate to the ‘ARC’ submenu.Press the < > button on the remote control to select Screen Aspect. When selectionis complete, press the <OK> button (16:9, 14:9 or 4:3).Supported Only When the PIP/POP/PBP mode is Set to OFF<16:9> <4:3>5When configuration is complete, press the <MENU> button to close the ‘Menu’screen.6Setting Sleep TimerSet the sleep timer to switch the TV power to the standby mode automatically when aspecified time has elapsed.Press the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.4<14:9>N󳀏O󳀏T󳀏E ▶Press the <SLEEP TIMER> button on the remote control to set the sleep timer.
2-31To Configure the SET UPUsing the LCD TVUnder ‘Clock’, press the < > button and the < > button on the remote control toset the current time. (When setting time, press the < > button on the remote controlto set ‘Hour’, press the < > button to move to’Minutes’, press the < > button toset ‘Minutes’, press the < > button to move to ‘AM/PM’, and press the < >button to select ‘AM/PM’.)4When setting is complete, press the < > button on the remote controller to navigateto ‘Clock’, and press the < > button to navigate to ‘Off Timer’.5In ‘Off Timer’, press the < > button and the < > button on the remote control to setthe ‘TV Off’ timer. (When setting time, press the < > button on the remote control toset ‘Hour’, press the < > button to move to ‘Minutes’, press the < > button to set‘Minutes’, press the < > button to move to ‘AM/PM’, and press the < > button toselect ‘AM/PM’.)6When configuration is complete, press the < > button on the remote control to navigateto ‘Off Timer’, and press the < > button on the remote control to navigate to ‘AutoOff’. Press the < > button on the remote control to select ‘On’.7When configuration is complete, press the <MENU> button to close the ‘Menu’ screen.8N󳀏O󳀏T󳀏E ▶To turn the TV off automatically, see the section on ‘Off Timer’ settings for visual settings.The program channel and volume level can also be configured for cases when the LCD TV is turned on.Press the < > button on the remote control to navigate to the ‘Timer’ submenu, andpress the < > button on the remote control. The ‘Time Selection’ screen will bedisplayed.3
Using the LCD TV2-32To Configure the SET UPViewing Closed CaptionsThe LCD TV can decodes and displays the closed caption that are broadcast withcertain TV shows. These captions are usually subtitles for the hearing impaired orforeign-language translations. All VCRs record the colsed caption signal fromtelevision program, so home-recorded video tapes also provide closed captions. Mostprerecorded commercial video tapes provide closed captions as well. Check for theclosed caption symbol in television schedule and on the tape’s packing : CCPress the <MENU> button on the remote control.1Press the < > button on the remote control to navigate to the ‘SET UP’ menu.2Press the < > button on the remote control to navigate to the ‘Caption’submenu.3N󳀏O󳀏T󳀏E ▶The Caption feature dose not work with PC signals.Press the < > buttons to select ‘CC1~4’ or ‘TEXT1~4’.4
2-33To Configure the SET UPUsing the LCD TVWhen you have finished, press the <MENU> button to close the ‘Menu’ screen.5N󳀏O󳀏T󳀏E 󳀏S▶In Caption mode, captions appear at the bottom of the screen, and they usually cover only a small portionof the picture.▶In TEXT mode, information is not related to the program, such as news or weather, is displayed. Textoften covers a large portion of the screen.▶Depending on the particular broadcast, it might be necessary to make changes to Channel and Field.N󳀏O󳀏T󳀏E ▶Different Channel and Field display different information :Field 2 carries additional information that supplements the information in Field 1.(for example, Channel 1may have subtitles in English, while Channel 2 has subtitles in Spanish.)Using the ParentalThe Parental feature automatically locks out programming that is deemed inappropriatefor childern. The user must enter a PIN(Personal Id Number) before any of the Parentalrestriction can be changed.N󳀏O󳀏T󳀏E ▶The Parental feature dose not work with PC signals.Setting Up Your PIN (Personal ID Number)1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.
Using the LCD TV2-34To Configure the SET UPN󳀏O󳀏T󳀏E ▶The default PIN number for a new set is ‘1-1-1-1’.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.4Press the < > button. The ‘Enter the Password : ----’ screen is displayed.5Enter 4-digit PIN number.
6After entering a valid PIN number, the ‘Parental’ menu screen will appear.Press the < > buttons to select ‘Set Password’.7When you have finished, press the <MENU> button to colse the ‘Menu’ screen.2-35To Configure the SET UPUsing the LCD TVHow to On/Off the Parental1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘SET UP’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.
Using the LCD TV2-36To Configure the SET UP4Press the < > button. The ‘Enter the Password : ----’ screen is displayed.5Enter 4-digit PIN number.6After entering a valid PIN number, the Parental menu is displayed and the ParentalLock will be highlighted.To On or Off the Parental feature, press the < > buttons to select ParentalLock On/Off.7When you have finished, press the <MENU> button to colse the ‘Menu’ screen.How to Setup Restriction Using the MPAA1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘Setup’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.
7Press the < > buttons to select particular MPAA category.The < > buttons will cycle through the MPAA categories.- G & Above : General audience (no restrictions).- PG & Above : Parental guidance suggested.- PG-13 & Above : Parents strongly cautioned.- R & Above : Restricted. Children under 17 should be accompanied by an adult.- NC-17 & Above : No Children under age 17.- X : Adults only- Unblocked : Not rated2-37To Configure the SET UPUsing the LCD TV4Press the < > button. The ‘Enter the Password : ----’ screen is displayed.5Enter 4-digit PIN number.6After entering a valid PIN number, the Parental sub menu screen will appear. Press the < > buttons to move to ‘MPAA’ sub menu. 8When you have finished, press the <MENU> button to colse the ‘Menu’ screen.N󳀏O󳀏T󳀏E ▶The Parental will automatically block any category that is ‘More restrictive’. For example, if you block thePG-13 & Above category, then R & Above, NC-17 & Above, and X will be automatically blocked also.
Using the LCD TV2-38To Configure the SET UP4Press the < > button. The ‘Enter the Password : ----’ screen is displayed.How to Setup Restriction Using the TV Guidelines1Press the <MENU> button on the remote control.2Press the < > button on the remote control to navigate to the ‘Setup’ menu.3Press the < > button on the remote control to navigate to the ‘Parental’ submenu.5Enter 4-digit PIN number.6After entering a valid PIN number, the Parental sub menu screen will appear.Press the < > buttons to select ‘TV Guidelines’.7Press the < > buttons to move to one of the six age-based categories in columnand press the < > buttons will cycle through the MPAA categories.- TV-Y : Young Children- TV-Y7 : Children 7 and Over- TV-G : General audience- TV-PG : Parental guidance- TV-14 : Viewers 14 and Over- TV-MA : Mature audience
To set the FV, D, L, S and V sub-ratings, first select one of these TV-Ratings :TV-Y7, TV-PG, TV-14 and TV-MA (See step 7).Next, while the TV-Ratings is selected, repeatedly press the < > button. This will cycle through the available sub-ratings (FV, D, L, S or V).Press the <OK> button to change the sub-ratings.For example, if you block TV-Y category, then TV-Y7 will be automatically blocked.Similarly, if you block TV-G category, then all the categories in the ‘young adult’ willbe blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (FV, V, S, L, D) worktogether similarly. (See step 8)2-39To Configure the SET UPUsing the LCD TVN󳀏O󳀏T󳀏E 󳀏S▶These categories consist of two separate groups : TV-Y and TV-Y7(Young Children through age 7), and TV-G through TV-MA(everybody else).▶The restrictions for these two groups work independently :If a household includes very young children as well as young adults, the TV guidelines must be setseparately for each group.▶The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.- : AllFV : Fantasy ViolenceV : ViolenceS : Sexual SituationL : Adult LanguageD : Sexual Suggestive Dialog8N󳀏O󳀏T󳀏E ▶The Parental will automatically block certain categories that are ‘More restrictive’.For example, if you block ‘L’ sub-rating in TV-PG, then the ‘L’ sub-rating in TV-14 and TV-MA will beautomatically blocked.When you have finished, press the <MENU> button to colse the ‘Menu’ screen.9
2-40External Control Device SetupConnect the RS-232C input jack to an external control device (such as a computer or an A/Vcontrol system) and control the Monitor’s functions externally.1Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.2RS-232C connection cables are not supplied with the Monitor.3N󳀏O󳀏T󳀏E ▶▶Type of Connector : D-Sub 9-pin MaleNo. Pin Name123456789No ConnectionRXD (Receive data)TXD (Transmit data)DTR (DTE side ready)GNDDSR (DCE side ready)RTS (Ready to send)CTS (Clear to send)No Connection
2-41External Control Device SetupUsing the LCD TVN󳀏O󳀏T󳀏E ▶▶RS-232C Configurations7-Wire Configuration(Standard RS-232C cable)3-Wire Configuration(Not standard)Press the <MENU> button and then use the ▲/▼button to select the SPECIAL menu.1Press the ▶button and then use ▲/▼button to select Set ID.2Press the ▶button and then use ◀/▶button to adjust Set ID.to choose the desiredmonitor ID number.• The adjustment range of Set ID. is 0 ~ 99.3Set ID- Use this function to specify a monitor ID number.- Refer to ‘Real Data Mapping 1’.Communication Parameters- Baud rate : 9600 bps (UART)- Data length : 8 bits- Parity : None- Stop bit : 1 bit- Communication code : ASCII code
Using the LCD TV2-42External Control Device Setup•Menu doesn’t display on screen when setting the 4, 12, 13, and 26 ~ 32.COMMAND 1PowerInput SelectVolume MuteVolume ControlContrastBrightnessColorTintSharpnessPIP/POP/PBPPIP PositionTrebleBassBalanceColor TemperatureRed AdjustmentGreen AdjustmentBlue AdjustmentPIP Input SourcekkkkkkkkkkkkkkkkkkkCOMMAND 2abefghijknqrstuvw$yDATA(Hexadecimal)0 ~ 10 ~ 70 ~ 10 ~ 640 ~ 640 ~ 640 ~ 640 ~ 640 ~ 640 ~ 40 ~ 30 ~ 140 ~ 140 ~ 640 ~ 30 ~ C80 ~ C80 ~ C80 ~ 7Command Reference List
2-43External Control Device SetupUsing the LCD TVN󳀏O󳀏T󳀏E ▶▶Transmission / Receiving ProtocolTransmission[Command1][Command2][ ][Set ID][ ][Data][Cr][Command 1] : k,[Command 2] : To control LCD set.[Set ID] : You can adjust the set ID to choose desired moni-tor ID number in Special menu. Adjustmentrange is 0 ~ 99. When selecting Set ID ‘0’, every connected LCD set is controlled. Set ID isindicated as decimal (0~99) on menu and as Hexa decimal (0x0~0x63) on transmission/receivingprotocol.[DATA] : To transmit command data.Transmit ‘FF’ data to read status of command.[Cr] : Carriage Return ASCII code ‘0x0D’[ ] : ASCII code ‘space (0x20)’▶▶OK Acknowledgement[Command2][ ][Set ID][ ][OK][Data][x]The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At thistime, if the data is data read mode, it indicates present status data. If the data is data write mode, it returnsthe data of the PC computer.▶▶Error Acknowledgement[Command2][ ][Set ID][ ][NG][x]The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data fromnon-viable functions or communication errors.Data 1 : Illegal Code2 : Not supported function3 : Wait more timePower (Command2 : a)●To control Power On/Off of the Monitor.- Transmission[k][a][ ][Set ID][ ][Data][Cr]Data 0 : Power Off 1 : Power On- Acknowledgement[a][ ][Set ID][ ][OK][Data][x]
Using the LCD TV2-44External Control Device Setup●To show Power On/Off.- Transmission[k][a][ ][Set ID][ ][FF][Cr]Data 0 : Power Off 1 : Power On- Acknowledgement[a][ ][Set ID][ ][OK][Data][x]In a like manner, if other functions transmit ‘FF’ data based on this format,Acknowledgement data feedback presents status about each function.Input Select (Command2 : b) (Main Picture Input)●To select input source for the Monitor. You can also select an input source using theINPUTSELECT button on the Monitor’s remote control.- Transmission[k][b][ ][Set ID][ ][Data][Cr]Data 0 : TV 1 : AV1 2 : AV23 : AV3 4 : COMPONENT1 5 : COMPONENT26 : RGB 7 : DVI- Acknowledgement[b][ ][Set ID][ ][OK][Data][x]Volume Mute (Command2 : e)●To control volume mute on/off. You can also adjust mute using the MUTE button onremote control.- Transmission[k][e][ ][Set ID][ ][Data][Cr]Data 0 : Volume mute on (Volume off)1 : Volume mute off (Volume on)- Acknowledgement[e][ ][Set ID][ ][OK][Data][x]
2-45External Control Device SetupUsing the LCD TVVolume Control (Command2 : f)●To adjust volume. You can also adjust volume with the volume buttons on remote control.- Transmission[k][f][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping1’ as shown below.- Acknowledgement[f][ ][Set ID][ ][OK][Data][x]Contrast (Command2 : g)●To adjust screen contrast. You can also adjust contrast in the Video menu.- Transmission[k][g][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping1’ as shown below.- Acknowledgement[g][ ][Set ID][ ][OK][Data][x]Real data mapping 1 0 : Step 0⋯A : Step 10 (SET ID 10)⋯F : Step 15 (SET ID 15)10 : Step 16 (SET ID 16)⋯64 : Step 100Brightness (Command2 : h)●To adjust screen brightness. You can also adjust brightness in the Video menu.- Transmission[k][h][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping 1’.- Acknowledgement[h][ ][Set ID][ ][OK][Data][x]
Using the LCD TV2-46External Control Device SetupColor (Command2 : i)●To adjust the screen color. You can also adjust color in the Video menu.- Transmission[k][i][ ][Set ID][ ][Data][Cr]Data Min : 0 ~ Max : 64Refer to ‘Real data mapping 1’.- Acknowledgement[i][ ][Set ID][ ][OK][Data][x]Tint (Command2 : j)●To adjust the screen tint. You can also adjust tint in the Video menu.- Transmission[k][j][ ][Set ID][ ][Data][Cr]Data Red : 0 ~ Green : 64Refer to ‘Real data mapping 1’.- Acknowledgement[j][ ][Set ID][ ][OK][Data][x]Sharpness (Command2 : k)●To adjust the screen sharpness. You can also adjust sharpness in the Video menu.- Transmission[k][k][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[k][ ][Set ID][ ][OK][Data][x]
2-47External Control Device SetupUsing the LCD TVPIP/POP/PBP (Command2 : n)●To control the PIP (Picture-in-Picture) or Twin Picture. You can also control thePIP/Twin picture mode using the PIP or TWIN PICTURE button on the remotecontrol or in the Twin menu.- Transmission[k][n][ ][Set ID][ ][Data][Cr]Data 0 : PIP OFF 1 : PIP2 : POP 3 : PBP1 4 : PBP2- Acknowledgement[n][ ][Set ID][ ][OK][Data][x]PIP Position (Command2 : q)●To select sub picture position for PIP. You can also adjust the sub picture position usingWin.position on the remote control or in the Twin menu.- Transmission[k][q][ ][Set ID][ ][Data][Cr]Data 0: Right down on screen1: Left down on screen2: Left up on screen3: Right up on screen- Acknowledgement[q][ ][Set ID][ ][OK][Data][x]Treble (Command2 : r)●To adjust treble. You can also adjust treble in the Audio menu.- Transmission[k][r][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[r][ ][Set ID][ ][OK][Data][x](Operates only when SSM is set to USER.)
Using the LCD TV2-48External Control Device SetupBass (Command2 : s)●To adjust bass. You can also adjust bass in the Audio menu.- Transmission[k][s][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[s][ ][Set ID][ ][OK][Data][x](Operates only when SSM is set to USER.)Balance (Command2 : t)●To adjust balance. You can also adjust balance in the Audio menu.- Transmission[k][t][ ][Set ID][ ][Data][Cr]Data Min: 0 ~ Max: 64Refer to ‘Real data mapping 1’.- Acknowledgement[t][ ][Set ID][ ][OK][Data][x]Color Temperature (Command2 : u)●To adjust color temperature. You can also adjust CSM in the PC menu.- Transmission[k][u][ ][Set ID][ ][Data][Cr]Data 0: Normal 1: Cool 2: Warm 3: User- Acknowledgement[u][ ][Set ID][ ][OK][Data][x]
2-49External Control Device SetupUsing the LCD TVRed Adjustment (Command2 : v)●To adjust red in color temperature.(Operates only when CSM is set to USER.)- Transmission[k][v][ ][Set ID][ ][Data][Cr]Data 0 ~ FF- Acknowledgement[v][ ][Set ID][ ][OK][Data][x]Green Adjustment (Command2 : w)●To adjust green in color temperature.(Operates only when CSM is set to USER.)- Transmission[k][w][ ][Set ID][ ][Data][Cr]Data 0 ~ FF- Acknowledgement[w][ ][Set ID][ ][OK][Data][x]Blue Adjustment (Command2 : $)●To adjust blue in color temperature.(Operates only when CSM is set to USER.)- Transmission[k][$][ ][Set ID][ ][Data][Cr]Data 0 ~ FF- Acknowledgement[$][ ][Set ID][ ][OK][Data][x]PIP Input Select (Command2 : y)●To select input source for sub picture in PIP mode.- Transmission[k][y][ ][Set ID][ ][Data][Cr]Data 0 : TV 1 : AV1 2 : AV23 : AV3 4 : COMPONENT1 5 : COMPONENT26 : RGB 7 : DVI- Acknowledgement[y][ ][Set ID][ ][OK][Data][x]

Navigation menu