ATEC AV420A 42 Inches TFT LCD TV User Manual

Download:
Mirror Download [FCC.gov]
Document ID	625347
Application ID	huiGs0HeSuSAN+KEZIxZYA==
Document Description	User Manual 9
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	206.77kB (2584577 bits)
Date Submitted	2006-02-02 00:00:00
Date Available	2006-01-30 00:00:00
Creation Date	2006-01-25 21:46:35
Producing Software	ezPDFGate with Acrobat Distiller
Document Lastmod	2006-01-25 21:46:45
Document Title	Users Manual
Document Creator	QuarkXPress3.3K: LaserWriter 8 KH-8.7.1
Document Author:	ÁøÁÖ¸Æ

Using the LCD TV
Configuring the PIP/POP/PBP Functions
2-31
Various functions for watching TV can be configured.
(Language, Transparency, ISM Method, Timer, Caption, Parental etc.)
Selecting the Main Screen Language
Press the  button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘Language’
submenu. Press the < > button on the remote control to select the preferred
language. When selection is complete, press the  button.
(English, Deutsch, Français, Español, Italiano, Korean)
When configuration is complete, press the  button to close the ‘Menu’ screen.
2-32
> button on the remote control to navigate to the ‘SET UP’ menu.
To Configure the SET UP
Using the LCD TV
Adjusting Image Transparency
Press the  button on the remote control.
Press the <
Press the <
> button on the remote control to navigate to the ‘Transparency’
submenu. Press the <
> button on the remote control to adjust the Image
Transparency. When adjustment is complete, press the  button (the settings
possible are 0~10).
> button on the remote control to navigate to the ‘SET UP’ menu.


When configuration is complete, press the  button to close the ‘Menu’ screen.
To Configure the SET UP
2-33
Using the LCD TV
Setting Sleep Timer
Set the sleep timer to switch the TV power to the standby mode automatically when a
specified time has elapsed.
N O T E
▶ Press the  button on the remote control to set the sleep timer.
Press the  button on the remote control.
Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
Press the <
press the <
displayed.
> button on the remote control to navigate to the ‘Timer’ submenu, and
> button on the remote control. The ‘Time Selection’ screen will be
Under ‘Clock’, press the < > button and the <
> button on the remote control to
set the current time. (When setting time, press the <
> button on the remote control
to set ‘Hour’, press the <
> button to move to’Minutes’, press the <
> button to
set ‘Minutes’, press the <
> button to move to ‘AM/PM’, and press the <
button to select ‘AM/PM’.)
Select Auto to specify the Time Zone.
When setting is complete, press the < > button on the remote control to navigate to
‘Clock’, and press the <
> button to navigate to ‘Off Timer’.
2-34
To Configure the SET UP
Using the LCD TV
In ‘Off Timer’, press the < > button and the <
> button on the remote control to set
the ‘TV Off’ timer. (When setting time, press the <
> button on the remote control to
set ‘Hour’, press the < > button to move to ‘Minutes’, press the <
> button to set
‘Minutes’, press the < > button to move to ‘AM/PM’, and press the <
> button to
select ‘AM/PM’.)
N O T E
▶ To turn the TV off automatically, see the section on ‘Off Timer’ settings for visual settings.
The program channel and volume level can also be configured for cases when the LCD TV is turned on.
When configuration is complete, press the <
> button on the remote control to navigate
to ‘Off Timer’, and press the <
> button on the remote control to navigate to ‘Auto
Off’. Press the < > button on the remote control to select ‘On’.
When configuration is complete, press the  button to close the ‘Menu’ screen.
Viewing Closed Captions
The LCD TV can decodes and displays the closed caption that are broadcast with
certain TV shows. These captions are usually subtitles for the hearing impaired or
foreign-language translations. All VCRs record the closed caption signal from
television program, so home-recorded video tapes also provide closed captions. Most
prerecorded commercial video tapes provide closed captions as well. Check for the
closed caption symbol in television schedule and on the tape’s packing : CC
N O T E
▶ The Caption feature does not work with PC signals.
Press the  button on the remote control.
Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
To Configure the SET UP
2-35
Using the LCD TV
Press the <
submenu.
Press the <
Press the <
> buttons to move to ‘Analog Caption’. And the press the 
buttons to select ‘CC1~4’ or ‘TEXT1~4’.
The options available for Digital Caption are Option, Font Setup and Font Style.
N O T E
> button on the remote control to navigate to the ‘Caption’
> buttons on the remote control.
▶ In Caption mode, captions appear at the bottom of the screen, and they usually cover only a small portion
of the picture.
▶ In TEXT mode, information is not related to the program, such as news or weather, is displayed. Text
often covers a large portion of the screen.
2-36
To Configure the SET UP
Using the LCD TV
When you have finished, press the  button to close the ‘Menu’ screen.
N O T E
▶ Different Channel and Field display different information :
Field 2 carries additional information that supplements the information in Field 1.(for example, Channel 1
may have subtitles in English, while Channel 2 has subtitles in Spanish.)
Using the Parental
The Parental feature automatically locks out programming that is deemed inappropriate
for children. The user must enter a PIN(Personal ID Number) before any of the Parental
restriction can be changed.
N O T E
▶ The Parental feature does not work with PC signals.
Setting Up Your PIN (Personal ID Number)
1 Press the  button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
To Configure the SET UP
2-37
Using the LCD TV
4 Press the <
> button. The ‘Enter the Password :
’ screen is displayed.
5 Enter 4-digit PIN number.
N O T E
▶ The default PIN number for a new set is ‘1-1-1-1’.
6 After entering a valid PIN number, the ‘Parental’ menu screen will appear.
Press the <
> buttons to select ‘Set Password’.
7 When you have finished, press the  button to colse the ‘Menu’ screen.
2-38
To Configure the SET UP
Using the LCD TV
How to On/Off the Parental
1 Press the  button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
4 Press the <
> button. The ‘Enter the Password :
’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental menu is displayed and the Parental
Lock will be highlighted.
To turn On or Off the Parental feature, press the <
Lock On/Off.
> buttons to select Parental
To Configure the SET UP
2-39
Using the LCD TV
7 When you have finished, press the  button to close the ‘Menu’ screen.
How to Setup Restriction Using the MPAA
1 Press the  button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
4 Press the <
> button. The ‘Enter the Password :
’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental sub menu screen will appear.
Press the <
2-40
> buttons to move to ‘MPAA’ submenu.
To Configure the SET UP
Using the LCD TV
7 Press the <
The <
> buttons to select particular MPAA category.
> buttons will cycle through the MPAA categories.
MPAA
G & Above
PG & Above
PG-13 & Above
R & Above
NC-17 & Above
Unblocked
General audience (no restrictions).
Parental guidance suggested.
Parents strongly cautioned.
Restricted. Children under 17 should be accompanied
by an adult.
No Children under age 17.
Adults only
Not rated
8 When you have finished, press the  button to colse the ‘Menu’ screen.
N O T E
▶ The Parental will automatically block any category that is ‘More restrictive’. For example, if you block the
PG-13 & Above category, then R & Above, NC-17 & Above, and X will be automatically blocked also.
To Configure the SET UP
2-41
Using the LCD TV
How to Setup Restriction Using the TV Guidelines
1 Press the  button on the remote control.
2 Press the <
> button on the remote control to navigate to the ‘SET UP’ menu.
3 Press the <
> button on the remote control to navigate to the ‘Parental’ submenu.
4 Press the <
> button. The ‘Enter the Password :
’ screen is displayed.
5 Enter 4-digit PIN number.
6 After entering a valid PIN number, the Parental sub menu screen will appear.
Press the <
> button to move to ‘Age Block’.
Age Block
General
Children
2-42
To Configure the SET UP
TV-G & Above
TV-PG & Above
TV-14 & Above
TV-MA
UnbloCked
TV-Y
TV-Y7
Unblocked
General audience
Parental guidance
Viewers 14 and over
Mature audience
Not rated
Young Children
Children 7 and over
Not rated
Using the LCD TV
7 Press the <
and press the <
> buttons to move to one of the six age-based categories in column
> buttons will cycle through the MPAA categories.
For example, if you block TV-Y category, then TV-Y7 will be automatically blocked.
Similarly, if you block TV-G & Above category, then all the categories in the ‘young adult’
will be blocked (TV-G & Above, TV-PG & Above, TV-14 & Above and TV-MA).
8 Press the <
> button to select ‘content Block’ and press the <
The ‘content Block’ submenu screen will appear.
> button.
9 To set the ‘Content Block’.
Content Block
Dialogue
(Sexual Suggestive Dialog)
Language
(Adult Language)
Sex
(Sexual Situation)
Violence
F.Violence (Fantasy Violence)
TV-PG & Above
TV-14 & Above
Unblocked
TV-PG & Above
TV-14 & Above
TV-MA
Unblocked
TV-PG & Above
TV-14 & Above
TV-MA
Unblocked
TV-PG & Above
TV-14 & Above
TV-MA
Unblocked
TV-Y7
Unblocked
10 When you have finished, press the  button to colse the ‘Menu’ screen.
To Configure the SET UP
2-43
1
Connect the RS-232C input jack to an external control device (such as a computer or an A/V
control system) and control the Monitor’s functions externally.
Connect the serial port of the control device to the RS-232C jack on the Monitor back panel.
RS-232C connection cables are not supplied with the Monitor.
N O T E
▶ Type of Connector : D-Sub 9-pin Male
No.
2-44
Pin Name
No Connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
External Control Device Setup
Using the LCD TV
N O T E
▶ RS-232C Configurations
7-Wire Configuration
(Standard RS-232C cable)
3-Wire Configuration
(Not standard)
Set ID
- Use this function to specify a monitor ID number.
- Refer to ‘Real Data Mapping 1’.
Press the  button and then use the ▲/▼ button to select the SPECIAL menu.
Press the ▶ button and then use ▲/▼ button to select Set ID.
Press the ▶ button and then use ◀/▶ button to adjust Set ID to choose the desired
monitor ID number.
• The adjustment range of Set ID is 0 ~ 99.
Communication Parameters
- Baud rate : 9600 bps (UART)
- Data length : 8 bits
- Parity : None
- Stop bit : 1 bit
- Communication code : ASCII code
External Control Device Setup
2-45
Using the LCD TV
Command Reference List
COMMAND 1
COMMAND 2
DATA(Hexadecimal)
0~1
0~7
0~1
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0 ~ 64
0~4
0~3
0 ~ 14
0 ~ 14
0 ~ 64
0~3
0 ~ 64
0 ~ 64
0~7
Power
Input Select
Volume Mute
Volume Control
Contrast
Brightness
Color
Tint
Sharpness
PIP/POP/PBP
PIP Position
Treble
Bass
Balance
Color Temperature
AV and HD H Position
AV and HD V Position
PIP Input Source
• Menu doesn’t display on screen when setting the 4, 12, 13, and 26 ~ 32.
2-46
External Control Device Setup
Using the LCD TV
N O T E
▶ Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1] : k,
[Command 2] : To control LCD set.
[Set ID] : You can adjust the Set ID to choose desired monitor ID number in Special menu. Adjustment
range is 0 ~ 99. When selecting Set ID ‘0’, every connected LCD set is controlled.
Set ID is indicated as decimal (0~99) on menu and as Hexadecimal (0x0~0x63) on
transmission/receiving protocol.
[DATA] : To transmit command data.
Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return ASCII code ‘0x0D’
[ ] : ASCII code ‘space (0x20)’
▶ OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
The Monitor transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it returns
the data of the PC computer.
▶ Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
The Monitor transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data
1 : Illegal Code
2 : Not supported function
3 : Wait more time
Power (Command2 : a)
● To control Power On/Off of the Monitor.
- Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data
0 : Power Off
1 : Power On
- Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-47
Using the LCD TV
● To show Power On/Off.
- Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data
0 : Power Off
1 : Power On
- Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
In a like manner, if other functions transmit ‘FF’ data based on this format,
Acknowledgement data feedback presents status about each function.
Input Select (Command2 : b) (Main Picture Input)
● To select input source for the Monitor. You can also select an input source using the
INPUTSELECT button on the Monitor’s remote control.
- Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data
0 : TV
3 : AV3
6 : RGB
1 : AV1
4 : COMPONENT
7 : DVI
2 : AV2
- Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Volume Mute (Command2 : e)
● To control volume mute on/off. You can also adjust mute using the MUTE button on
remote control.
- Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data
0 : Volume mute on (Volume off)
1 : Volume mute off (Volume on)
- Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
2-48
External Control Device Setup
Using the LCD TV
Volume Control (Command2 : f)
● To adjust volume. You can also adjust volume with the volume buttons on remote control.
- Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
- Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Contrast (Command2 : g)
● To adjust screen contrast. You can also adjust contrast in the Video menu.
- Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping1’ as shown below.
- Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
Real data mapping 1
0 : Step 0
⋯
A : Step 10 (SET ID 10)
⋯
F : Step 15 (SET ID 15)
10 : Step 16 (SET ID 16)
⋯
64 : Step 100
Brightness (Command2 : h)
● To adjust screen brightness. You can also adjust brightness in the Video menu.
- Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-49
Using the LCD TV
Color (Command2 : i)
● To adjust the screen color. You can also adjust color in the Video menu.
- Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 0 ~ Max : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Tint (Command2 : j)
● To adjust the screen tint. You can also adjust tint in the Video menu.
- Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red : 0 ~ Green : 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Sharpness (Command2 : k)
● To adjust the screen sharpness. You can also adjust sharpness in the Video menu.
- Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
2-50
External Control Device Setup
Using the LCD TV
PIP/POP/PBP (Command2 : n)
● To control the PIP (Picture-in-Picture) or Twin Picture. You can also control the
PIP/Twin picture mode using the PIP or TWIN PICTURE button on the remote
control or in the Twin menu.
- Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data
0 : PIP OFF
2 : POP
1 : PIP
3 : PBP1
4 : PBP2
- Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
PIP Position (Command2 : q)
● To select sub picture position for PIP. You can also adjust the sub picture position using
Win.position on the remote control or in the Twin menu.
- Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data
0: Right down on screen
1: Left down on screen
2: Left up on screen
3: Right up on screen
- Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Treble (Command2 : r)
● To adjust treble. You can also adjust treble in the Audio menu.
- Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
(Operates only when SSM is set to USER.)
External Control Device Setup
2-51
Using the LCD TV
Bass (Command2 : s)
● To adjust bass. You can also adjust bass in the Audio menu.
- Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
(Operates only when SSM is set to USER.)
Balance (Command2 : t)
● To adjust balance. You can also adjust balance in the Audio menu.
- Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min: 0 ~ Max: 64
Refer to ‘Real data mapping 1’.
- Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Color Temperature (Command2 : u)
● To adjust color temperature. You can also adjust CSM in the PC menu.
- Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data
0: Normal
2: Warm
1: Cool
3: User
- Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
2-52
External Control Device Setup
Using the LCD TV
AV and HD H Position (Command2 : v)
● To adjust AV and HD mode H Posion
- Transmission
[k][v][ ][Set ID][ ][Data][Cr]
Data
0 ~ 64
- Acknowledgement
[v][ ][Set ID][ ][OK][Data][x]
AV and HD V Position (Command2 : w)
● To adjust AV and HD mode V Posion
- Transmission
[k][w][ ][Set ID][ ][Data][Cr]
Data
0 ~ 64
- Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
PIP Input Select (Command2 : y)
● To select input source for sub picture in PIP mode.
- Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data
0 : TV
3 : AV3
6 : RGB
1 : AV1
4 : COMPONENT
7 : DVI
2 : AV2
- Acknowledgement
[y][ ][Set ID][ ][OK][Data][x]
External Control Device Setup
2-53

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2006:01:25 21:46:45+09:00
Create Date                     : 2006:01:25 21:46:35+09:00
Title                           : TV¸Å´º¾ó3742¬SC|300å
Author                          : ÁøÁÖ¸Æ
Creator                         : QuarkXPress3.3K: LaserWriter 8 KH-8.7.1
Producer                        : ezPDFGate with Acrobat Distiller
Page Count                      : 23
Mod Date                        : 2006:01:25 21:46:45+09:00
Creation Date                   : 2006:01:25 21:46:35+09:00
Metadata Date                   : 2006:01:25 21:46:45+09:00

EXIF Metadata provided by EXIF.tools