Download: Mirror Download [FCC.gov] Document ID 625348 Application ID huiGs0HeSuSAN+KEZIxZYA== Document Description User Manual 10 Short Term Confidential No Permanent Confidential No Supercede No Document Type User Manual Display Format Adobe Acrobat PDF - pdf Filesize 196.98kB (2462289 bits) Date Submitted 2006-02-02 00:00:00 Date Available 2006-01-30 00:00:00 Creation Date 2005-11-09 02:00:47 Producing Software ezPDFGate with Acrobat Distiller Document Lastmod 2006-01-25 21:49:12 Document Title TV......3742.SC.300. Document Creator QuarkXPress3.3K: LaserWriter 8 KH-8.7.1 Document Author: ......
Initial PC Mode Settings
PC Menu Components
Main Menu Settings
To use the PC mode, set the resolution on the PC to 1280 x 768 @ 60Hz
/ 1360 x 768 @ 60Hz, and connect it to the LCD TV (supports up to 1600
x 1200 @ 60Hz/1280 x 1024 @ 85Hz).
Connect the LCD TV and the PC, and press the button.
Press the button on the remote control.
The ‘MAIN SOURCE’ screen will be displayed.
Check the type of cable that connects the LCD TV and
the PC. Press the <
> button on the remote control
to navigate to RGB (or DVI), and press the
button. (or press the button on the remote
control.)
The ‘PC’ screen will be displayed.
N O T E
▶ Highest resolution supported by the PC mode
Main screen : 1600x1200 @ 60Hz/1280x1024 @ 85Hz
Sub screen : 1280x768 @ 60Hz/1360x768 @ 60Hz
3-2
Initial PC Mode Settings
PC Mode Environment Settings
Initial PC Mode Settings
3-3
The Main menu has 5 categories, which contain submenus and option
items.
Switch to the ‘PC’ mode and press the button on the remote control.
The ‘MAIN MENU’ screen will be displayed.
Main Menu
PICTURE
Sub Menu 1
Sub Menu 2
Sub Menu 3
ARC
OverScan
CSM
16:9, 4:3
1~5
Normal
Screen Aspect Selection
Magnifies the size of the picture on screen.
Plain white
Cool
Bluish white
Warm1
Reddish white
Warm2
Red
User
Controls color (Red, Green, Blue) of the display.
Brightness
SOUND
Description
Adjust the over-all brightness or darkness of the screen.
Contrast
Adjust the brightness and darkness between objects and backgrounds.
Audio Language
English, Français, Español, Portugues
SPDIF
AC-3
PCM
SSM
AVL
PIP/POP/PBP
3-4
Music
When watching music video or concerts.
Movie
When watching movies.
Speech
When watching a show that is mostly dialogue.
User
Bass : Adjust bass.
Treble : Adjust treble.
AVL Function On/Off
On/Off
Audio Speaker On/Off
Audio Speaker Function On/Off
Surround
Surround Output Off
Off
Normal
Optimal Surround for Output Condition.
Spatial
Enhanced Surround.
Balance
-10 ~ 10
Adjust balance between the left & right speakers.
On/Off
Off
PIP/POP/PBP Function Off
PIP
Source
TV, AV1~AV3, DVI (or RGB)
Swap
To Set
PIP Size
Small, Large
PC Menu Components
PIP Position
PIP Screen Position Selection.
POP
Source
TV, AV1~AV3, DVI (or RGB)
Swap
To Set
PBP1~2
Source
TV, AV1~AV3, DVI (or RGB)
Swap
To Set
PC Mode Environment Settings
Main Menu
Sub Menu 1
Sub Menu 2
Sub Menu 3
Description
SET UP
Language
English, Deutsch, Français, Español, Italiano, Korean
(Menu Screen Display Language Selection.)
Transparency
0~10
Adjusts the image transparency.
ISM Method
Normal
Normal screen
Orbit
Moves the screen up, down, left and right in
small increments to prevent overheating of the
panel during prolonged use.
White
Sets the whole screen to white.
Set ID
0~99
Set ID Selection
Factory Reset
Off
Selects the factory default.
Timer
Clock,
Manual
Auto
Pacific
The standard
time area
selection.
Mountain
Central
Eastern
Caption
Off Timer
AM, PM, On/Off TV Off Time Selection.
On Timer
AM, PM, On/Off TV On Time Selection.
CHANNEL
CATV/Air
Volume
0~100
Auto Off
On/Off
TV Off Auto Function Selection.
On/Off
Off/On
Caption function Off/On.
(When the subtitle function is provided.)
Option
Service 1~6
Font Setup
By Program
By User
Font Style
Parental
Size
Standard, Large, Small
Style
Font 1~7
Fg Color
White, Black, Red, Green, Blue, Yellow,
Magenta, Cyan
Bg Opacity
Solid, Flash, Translucent, Transparent
Edge Type
None, Raised, Depressed, Uniform,
Left Shadow, Right Shadow
Edge Color
White, Black, Red, Green, Blue, Yellow,
Magenta, Cyan
Lock On/Off
Parental function On/Off.
MPAA
MPAA(Motion Picture Association of America)
Guideline setup available.
Age Block
TV Guideline function support.
Contect Block
Set Password
Password setup available.
PC Menu Components
3-5
PC Mode Environment Settings
3-6
Main Menu
Sub Menu 1
SCREEN
Auto-Configure To Start
Automatic adjustment of the screen/Auto in
pogress.
H-Position
0~100
Horizontal screen position adjustment.
V-Position
0~100
Vertical screen position adjustment.
Clock
0~100
Picture quality adjustment by fine-tuning.
Phase
0~255
Screen phase adjustment (adjustment for
screen noise, focus when letters appear to
overlap each other, brightness, stability, ect.).
PC Menu Components
Sub Menu 2
Sub Menu 3
Description
PC Mode Environment Settings
PC Menu Components
3-7
PICTURE Menu Settings
3-8
Switch to the ‘PC’ mode, press the button on the remote control, and then
press the button on the remote control.
Press the button or the <
> button on the remote control. The menu will be
selected, and the submenus can be navigated. Select the ‘CSM (Color Standard Mode)’
submenu and press the <
> button on the remote control to select the option item
(select option items like ‘Normal, Cool, User, Warm1~2’ and so on in the ‘CSM’ submenu).
Main Menu Settings
PC Mode Environment Settings
When selection is complete, press the button on the remote control.
Press the <
> button on the remote control to navigate to the ‘Brightness, Contrast’
submenu in order to adjust brightness and contrast.
When adjustment is complete, press the button on the remote control, and press the
button on the remote control once again to close the ‘Menu’ screen.
N O T E
▶ To configure the menu without the remote control
❶ Press the button located at the bottom of the LCD TV.
❷ Press the buttons to navigate to submenus.
❸ Press the buttons to adjust each item.
❹ If ‘Menu for Local Key’ is on, the button is used as the button. When adjustments
are complete, press the button to close the ‘Menu’ screen.
▶ SOUND/PIP/POP/PBP/SET UP Menu Settings
For information on the SOUND/PIP/POP/PBP/SET UP menu settings, see ‘2.6 Adjusting the Sound’,
’2.7 Configuring the PIP/POP/PBP Functions’, and ‘2.8 To Configure the SET UP’.
Main Menu Settings
3-9
PC Mode Environment Settings
SCREEN Menu Settings
Switch to the ‘PC’ mode, press the button on the remote control, and then press the
> button on the remote control to navigate to the ‘SCREEN’ menu.
Press the <
> button on the remote control to navigate to the ‘Auto Configure’
submenu, and press the <
> button on the remote control. The ‘Auto in Progress’ screen
will be displayed, and the screen will be adjusted automatically.
3-10
Main Menu Settings
PC Mode Environment Settings
Press the <
> button and the <
> button on the remote control to adjust the
submenus ‘H-Position’, ‘V-Position’, ‘Clock’, ‘Phase’, etc.
● H-Position : Adjusts horizontal screen position.
● V-Position : Adjusts vertical screen position.
● Clock : Adjusts the picture quality by fine tuning the screen.
● Phase : Adjusts the screen phase (adjustment for screen noise, focus when letters appear
to overlap each other, brightness, stability, etc.).
When adjustment is complete, press the button on the remote control, and press the
button on the remote control once again to close the ‘Menu’ screen.
Main Menu Settings
3-11
Appendix
Specifications
37″
Panel
In/Out
Panel Type
37″Wide TFT Colour LCD
Display Area
819.6 mm×460.8 mm (37.02 inch(940.3 mm) diagonal)
Display Color
(8bit) 16.7 million
Pixel Pitch
Recommended Resolution
0.2 mm×0.6 mm×RGB
1366×768
Contrast Ratio
600 (typical)
Luminance white
500 cd/m2 (Center 1 point Typ.)
Viewing Angle
Free View Angle (R/L 176, U/D 176)
PC
Analog RGB 15 pin D-Sub Input
DVI Input
Video
Composite Input
Composite Output
S-Video Input
Component Input
Audio
PC (analog RGB) Input
DVI Input
Composite RCA L/R Input
Composite RCA L/R Output
Component RCA L/R input
Headphone Output
SPDIF Output
PC/DVI Audio Input
RF Signal
Others
Antenna
75Ω Coaxial cable
Color System
NTSC
Sound System
Stereo Type
MTS/SAP
Text
Close caption/V-chip
Power Consumption
Power Save Mode
221 watts
Less than 3 watts
Speaker
10 watts×2
Size
19(W)×11.5(D)×59(H)cm
7.48(W)×4.52(D)×23.22(H)inch
Weight
Plug & Play
A-2
Appendix
2.2kg/4.84pounds(gross)
DDC 1/2 B
Appendix
Screen Control
True Colour On Screen Display Menu, Bit Map
Remote Controller
Yes
Dimension
1086(W)×304(D)×640(H)mm : (Speaker, Stand) included
42.75(W)×11.96(D)×25.19(H)inch
Weight
Net 29.7kg/65.47pounds
Gross 36.6kg/80.68pounds
42″
Panel
In/Out
Panel Type
42″Wide TFT Colour LCD
Display Area
930.25 mm×523.01 mm (42.02 inch (1067.308 mm) diagonal)
Display Color
16.7 million, 8 bit
Pixel Pitch
Recommended Resolution
0.227 mm×0.681 mm×RGB
1366×768
Contrast Ratio
550(Typical)
Luminance white
500 cd/m2 (Center 1 point Typ.)
Viewing Angle
Free View Angle (R/L 178, U/D 178)
PC
Analog RGB 15 pin D-Sub Input
DVI Input
Video
Composite Input
Composite Output
S-Video Input
Component Input
Audio
PC (analog RGB) Input
DVI Input
Composite RCA L/R Input
Composite RCA L/R Output
Component RCA L/R
Headphone Output
SPDIF Output
PC/DVI Audio Input
RF Signal
Others
Antenna
75Ω Coaxial cable
Color System
NTSC
Sound System
Stereo Type
MTS/SAP
Text
Power Consumption
Close caption/V-chip
253 watts
Power Save Mode
Less than 3 watts
Appendix
A-3
Appendix
Speaker
10 watts ×2
Size
19(W)×11.5(D)×68(H)cm
7.48(W)×4.52(D)×26.77(H)inch
Weight
2.5kg/5.5pounds(gross)
Plug & Play
DDC 1/2 B
Screen Control
True Colour On Screen Display Menu, Bit Map
Remote Controller
Yes
Dimension
1221(W)×304(D)×731(H)mm : (Speaker, Stand) included
48.07(W)×11.96(D)×28.77(H)inch
Weight
Net 33.0kg/72.75pounds
Gross 41.5kg/91.49pounds
A-4
Appendix
Appendix
Display Modes
If the signal from the system is equal to the standard signal mode, the TV is adjusted
automatically. If the signal from the system does not equal the standard signal mode, adjust the
mode by referring to the Video card user guide, because the TV might not display or the power
LED only might be on. For the display modes listed below, the screen image has been optimized
initially.
Pixel
Frequency (KHz) Frequency (Hz) Frequency(MHz)
Section
Resolution
PC
640×400
37.861
85.08
31.5
VESA
640×350
31.469
70.087
25.175
640×350
640×480
640×480
37.861
31.469
35.000
85.08
59.94
66.667
31.5
25.175
30.24
IBM
VESA
IBM
MAC
640×480
37.861
72.809
29.765
640×480
640×480
720×400
720×400
37.500
43.269
31.469
37.927
75.0
85.008
70.087
85.039
31.5
36.0
28.332
35.5
800×600
35.156
56.25
36.0
800×600
800×600
800×600
37.879
48.077
46.875
60.317
72.188
75.0
40.0
50.0
49.5
800×600
53.674
85.061
56.25
VESA
DTV
Comment
VESA
VESA
VESA
IBM
VESA
VESA
VESA
VESA
VESA
832×624
49.726
74.551
57.284
MAC
1024×768
1024×768
1024×768
1024×768
1024×768
1152×864
48.780
48.363
56.476
60.241
60.030
67.500
60.001
60.004
70.069
74.927
75.029
75.0
64.11
65.0
75.0
81.724
78.75
104.993
MAC
VESA
VESA
MAC
1152×870
68.681
75.062
100.0
MAC
1280×768
47.700
60.0
80.136
1360×768
720×480
720×576
720×480
720×576
1280×720
1280×720
1920×1080
47.700
15.735
15.735
31.469
31.250
44.964
37.500
33.750
60.0
59.94
50.0
59.94
50.0
59.94
50.0
60.0
80.136
13.500
13.595
25.175
26.566
74.176
60.466
74.25
SDTV, DVD 480i
SDTV, DVD 576i
SDTV, 480p
SDTV, 576p
HDTV, 720p
HDTV, 720p
HDTV, 1080i
1920×1080
28.125
50.0
70.723
HDTV, 1080i
VESA
VESA
Appendix
A-5
Appendix
Check before calling for service
Please check the following before asking the service center about any problems with
your LCD TV.
Something seems to be wrong with the TV
Symptoms
What to do
● The TV does not turn on.
Check the power cable connection and
press the button on the
remote control.
● The TV is making strange noises, but
there is no video or audio.
The TV may be in external input mode.
Press the button on the remote
control.
● There is video but no audio.
Try pressing the volume adjustment
> button.
Try pressing the button on the
remote control.
● There is audio but no video.
Press the button to adjust the
screen brightness (go to the screen
menu to adjust the settings. For more
information, see Pages 2-18~21.)
When you connect it to the external
devices, check the status of Video
terminal connection.
● Images overlap , spots appear on the
screen, and audio is unstable.
Check the antenna cable connection.
Check whether the antenna cable is old
or damaged.
Check whether the external antenna
direction is correct. It may have been
altered by strong winds and so on.
A-6
Appendix
Appendix
Symptoms
What to do
● The picture shakes, lines appear, and
audio is unstable.
Check whether the TV signal is receiving
interference from other radio waves or
devices.
Check whether the TV signal is receiving
interference from automobiles, highvoltage cables, airplanes, neon
signboards and so on. Change the
antenna direction if necessary.
● The remote controller does not work.
Check whether the batteries are dead or
installed incorrectly.
Check whether the receiver on the LCD
TV unit is masked. Ensure it is facing in
the correct direction.
● The LCD TV is making cracking
sounds.
When the LCD TV is turned on or off,
cracking sounds may be heard. This
happens because the cabinet contracts
or expands due to environmental factors,
including humidity and temperature.
There are no adverse effects on the TV’s
performance.
● Stereo audio is unclear or discontinuous.
If the broadcasting station is too far away
or the TV is getting interference from other
radio waves, the stereo audio may not be
clear. In this case, press the
button.
● When playing VCR, there is no video.
Check whether the VCR is set to a
dedicated VCR channel (3 or 4), and the
input mode for the TV is set to video
mode.
Check the video cable connection
between the VCR and TV.
Appendix
A-7
Appendix
Symptoms
● When playing a DVD, there is no video.
What to do
Check the video cable connection
between the DVD and TV.
Check whether there is a problem with
the DVD title.
Check whether the external input signal
matches the DVD output signal.
● When playing VCR, there is noise on the
screen.
Use the screen adjustment button on the
VCR to make adjustments.
Check whether the video tape is in good
condition.
A-8
● Some channels cannot be received.
Ensure that your channel selection is
correct. For more information, see
section ‘2.3 To Configure TV Channels’.
● When playing VCR, there is no sound.
Check the audio cable connection
between the TV and VCR.
● The DVD playback screen is not clear.
Check whether the DVD title surface is
clean. Check for scratches and dust.
Appendix
Appendix
Troubleshooting
If you have a problem setting up or using your LCD TV, you may be able to solve it yourself.
Before contacting customer service, try the suggested actions that are appropriate to your
problem.
What you see...
‘No Signal’ message
Suggested Actions
Reference
● Ensure
that the signal cable is firmly
connceted to the PC or video
sources.
● Ensure that the PC or video sources
are turned on.
Page 1-18 ~ 1-26
● Check
the maximum resolution and
the frequency of the video adaptor.
● Compare these values with the data
in the Display Modes Timing Chart.
The image is too light or too dark ● Adjust the Brightness and Contrast.
Page A-5
Horizontal bars appear to flicker,
jitter or shimmer on the image.
● Adjust
Page 3-8
Page 3-9
Vertical bars appear to flicker,
jitter or shimmer on the image.
● Adjust
Image is not stable and may
appear to vibrate
● Auto in progress will clear it automatically.
‘Out of Range’ message
Image is not centered on the
screen.
No sound
Sound level is too low
the Clock function.
● Auto in progress will clear it automatically.
Page 2-20 ~ 2-21
Page 3-6 ~ 3-7
the Phase function and then
adjust the Clock function.
● Auto in progress will clear it automatically.
● Check
that the display resolution and
frequency of your PC or video board
is an available mode for your TV.
On your computer check:
Control Panel, Display, Settings
● Auto in progress will set the best
position automatically.
● Adjust the horizontal and vertical
position.
● Ensure that the audio cable is firmly
connected to both the audio-in jack
on your TV and the audio-out jack
on your sound card.
● Check
the volume level
● Check
the volume level
the volume is still too low after
turning the control to its maximum,
check the volume control on the
computer sound card or software
program.
Page 3-8
Page 3-9
Page 3-8
Page 3-9
Connecting a PC, TV or VCR, DVD
Page 1-18 ~ 1-26
Adjust the Sound settings
Page 2-22 ~ 2-24
● If
Refer to your computer, sound card or
software documentation.
Sound is too high pitched or too
low pitched
● Adjust
Adjusting the Sound Settings,
Page 2-22 ~ 2-24
TV signal is not received
● Ensure
Connecting to watch TV or VCR, DVD
Page 1-18 ~ 1-26
the Treble and Bass to
appropriate level.
that the antenna cable is
firmly connected to the VHF/UHF
jack.
Appendix
A-9
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.4
Linearized : No
Create Date : 2005:11:09 02:00:47Z
Modify Date : 2006:01:25 21:49:12+09:00
Page Count : 20
Creation Date : 2005:11:09 02:00:47Z
Mod Date : 2006:01:25 21:49:12+09:00
Producer : ezPDFGate with Acrobat Distiller
Author : ......
Metadata Date : 2006:01:25 21:49:12+09:00
Creator : ......
Title : TV......3742.SC.300.
EXIF Metadata provided by EXIF.tools
