ATI Electronics BAR109 Bluetooth Audio Receiver User Manual BAR109 User

Download:
Mirror Download [FCC.gov]
Document ID	3142115
Application ID	0nOCBmQ3i1GRK9h4JTGcug==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.29kB (116186 bits)
Date Submitted	2016-09-21 00:00:00
Date Available	2016-09-21 00:00:00
Creation Date	2016-09-20 14:17:32
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2016-09-20 14:17:32
Document Title	Microsoft Word - BAR109 User说明书
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

User manual
Item# BAR109
®
Bluetooth Wireless Music Receiver
1. Notice Before Using
Thank you for purchasing the Bluetooth® Audio Receiver.
Please read this User's Manual completely before you use
the device.
The Music Receiver is based on the advanced Bluetooth®
wireless technology and compliant with Bluetooth
V3.0+EDR specification. After paired to a Bluetooth® enable
phone or other devices which built‐in Bluetooth® audio, it is
available for music play with a universal earphone. The
hands‐free function is also available for phone call
conversation.
2. Package Contents List
Please inspect this package and refer to the package
contents list below to verify all items were included in this
package:
1) BAR109 Bluetooth® Audio Receiver
2) USB Charging Cable
3) User's Manual
3. Bluetooth® Audio Receiver Overview
1 ‐ MFB
2 ‐ USB
3 ‐ LED
4 ‐ Microphone
5 ‐ 3.5mm Male Connector
4. Charging the battery
The Music Receiver is operated with a rechargeable battery.
Charge the battery completely before its first use.
1) Connect USB cable to a general USB power supplier.
2) The red indicator light will turn on while the charger is
connected. Charging the battery fully may take up to 2
hour.
3) The red indicator light will turn blue when the battery
is fully charged. Disconnect the charger from the
device and the outlet.
NOTE:
‐ The fully charged battery has power for up to 6 hours of
play‐time, and up to 240 hours of standby time. However,
the talk and standby times may vary when used with
different Bluetooth® devices, usage settings, usage styles,
and environments.
‐ When the battery power is low, the Wireless Music
Receiver will remind you by the "Beep" tone every 20
seconds, and the red indicator light starts to flash.
‐ To avoid a complete discharge of the battery, it should be
charged at least every 3 months if leaving the device unused.
5. Pairing to your Bluetooth® phone
Before you use Wireless Music Receiver the first time, you
must pair the unit Bluetooth® device. Please follow the
instruction to pair with a Bluetooth® enabled mobile phone.
Pairing is a one‐time process and required only for the first
connection with the cell phone.
1) Keep it within range of a Bluetooth®‐ready cell phone;
the distance should not exceed 1 meter.
2) Hold the MFB button for approx. 5 seconds, the
indicator light intermittently flashes red and blue. The
device is in pairing mode.
3) Find the Bluetooth® setting of your cell phone and
start the search for Bluetooth® devices. (For further
details, please read the operating instructions of your
cell phone).
4) From the list of devices found, select the "BAR109".
5) If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, the
indicator changes to flash blue.
6) After pairing, the music receiver will connect with the
cell phone automatically.
Note: If pairing is not completed within 2 minutes, the
receiver will turn off automatically. Please repeat the
pairing process if this happens.
6. Turning
on /off
Bluetooth® Wireless Music Receiver
Turning on
Press and hold MFB for 5 seconds to turn on the receiver.
Connecting to a Bluetooth® phone
If it has completed the pairing process successfully, it will
connect to the phone you last connected automatically
while it turns on. Please ensure your phone's Bluetooth®
function is active.
Turning off
Press and hold MFB for 5 seconds to turn the receiver off.
Note:
To conserve power, if it is not connected to a device for
approximately 10 minutes, it will turn off automatically.
7. Using the wireless music receiver
Listen to the music
Connect your earphone to the AUX port to listen to the
music. Press MFB to play/pause the music.
Answer a call
When you receive an incoming call, press the MFB button
shortly to answer the incoming call. The music will pause
automatically while a call is dialed out/incoming, and
resume when the conversation has ended.
Ending a call
Press the MFB button shortly to end a call.
Last number re‐dialing
In standby mode, double click MFB button to re‐dial the last
number you dialed out.
8. Safety and general information
1)
2)
3)
4)
Please read this User's Manual carefully and follow all
instructions.
To avoid any damage or malfunction of the device do
not drop the device from high places.
Keep device away from humidity, water and any other
liquid. If the device is exposed to water, moisture and
other liquids do not operate it to avoid any electrical
shock, explosion and damage to the device or yourself.
Do not place or keep this device near any heat sources,
such as, direct sunlight, radiators, stoves or other
apparatus that produce heat. This may cause an
explosion, degrade the performance and/or reduce
battery life.
5) Do not modify, repair or disassemble device (Especially
the battery). Doing this will void the warranty.
6) Do not place heavy objects on the device.
7) Use only the supplied and approved chargers.
8) Please contact the retailer for replacement or support
with this product.
9) Unplug this device when unused for long periods of
time or during lightening storms.
10) The battery used in this device may present a risk of
fire or chemical burn if mistreated.
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not
expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2016:09:20 14:17:32+08:00
Modify Date                     : 2016:09:20 14:17:32+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - BAR109 User说明书
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:5b2a048c-c719-41b1-be1f-913cfda4ce7e
Instance ID                     : uuid:6eb4a9df-5fff-4f41-8786-252407d9d14e
Page Count                      : 10

EXIF Metadata provided by EXIF.tools