ATI Electronics H904 Bluetooth Earbuds User Manual H904 user manual

Download:
Mirror Download [FCC.gov]
Document ID	3412070
Application ID	3cWqN1OI+1x3MUzILJ1oDQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.35kB (166875 bits)
Date Submitted	2017-06-02 00:00:00
Date Available	2017-06-02 00:00:00
Creation Date	2017-06-02 10:47:03
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	2017-06-02 10:47:03
Document Title	Microsoft Word - H904?user?manual
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

User manual
®
Bluetooth Headset H904
-1-
1.
Notice Before Using
Thank you for purchasing the Bluetooth® Headset H904. Please
read this User's Manual completely before you use the Headset.
The H904 has been developed using Bluetooth® wireless
technology and is capable of connecting with Bluetooth® devices
designed with Audio Gateway. PDAs, Desktops and Notebook
computers can be connected and paired with the Headset using a
USB Bluetooth® Dongle or built‐in Bluetooth capability (if
applicable). Before using the Headset please verify your
Bluetooth® device (Phone, PDA) complies with Bluetooth®
V1.1/V1.2/V2.0/V2.1/3.0 and supports the Bluetooth® Headset or
Hands‐free profile.
-2-
2.
Package Contents List
Please inspect this package and refer to the package contents list
below to verify all items were included in this package:
1)
Headset.............................................................................1
2)
Ear hooks ..........................................................................2
3)
Ear gels (3 Sizes) ................................................................3
4)
User's Manual ...................................................................1
5)
Warranty card ...................................................................1
-3-
3.
H904 Bluetooth® Headset Overview
①
②
③
④
⑤
⑥
⑦
⑧
Answer button
Dual‐color indicator
Charging socket
Ear hook
Ear cap
Volume(+)
Volume(‐)
Microphone
-4-
4.
Battery information
The device is equipped with an integrated lithium‐polymer
battery. The battery cannot be replaced. Do not attempt to
remove the battery from the device since it would damage the
device. The full performance of a new battery is not achieved
until after two or three complete charging‐discharging cycles. The
battery can be charged and discharged several hundred times,
but it loses its capacity over time.
Disconnect the H904 from the power supply as soon as the
battery is fully charged, overcharging would reduce the service
life of the battery. A charged battery will lose its capacity if it is
not used on a regular basis.
Important:
Ensure that the battery is fully charged if you do not use the
device for a long period of time. To avoid a complete discharge of
-5-
the battery, the H904 should be charged at least every 6 months.
5.
Charging the battery
The H904 is operated with a rechargeable battery. Charge the
battery completely before its first use. Read the section "Battery
information" before starting the charging process.
1)
Connect USB cable to a general USB power supplier.
2)
When the charger is connected to the headset, the red
indicator light will turn on. Charging the battery fully may
take up to 1‐2 hours.
-6-
3)
When the battery is fully charged, the red indicator light
will turn blue. Disconnect the charger from the headset
and the outlet. The headset is ready to use.
NOTE:
‐ For first time use, please charge the headset fully.
‐ The fully charged battery has power for up to 5 hours of
talk‐time, and up to 120 hours of standby time. However, the talk
and standby times may vary when used with different mobile
phones or other compatible Bluetooth® devices, usage settings,
usage styles, and environments. When the battery power is low,
the headset will remind you by a "Beep" tone every 20 seconds,
and the red indicator light starts to flash.
6.
Pair to your Bluetooth® phone
Before you use your headset the first time, you must pair the unit
with a Bluetooth® enabled mobile phone. Pairing is a one‐time
-7-
process and required only for the first connection with the cell
phone. The H904 can be connected simultaneously with two cell
phones.
6)
Keep the H904 within range of a Bluetooth®‐ready cell
phone; the distance should not exceed a meter.
7)
Hold the Answer button for approx. 5 seconds until you
hear a short‐low signal tone and the indicator light
intermittently flashes red and blue. The device is in pairing
mode. Pairing mode should engage automatically upon
the first time turning on the headset.
8)
Find the Bluetooth® setting of your cell phone and start
the search for Bluetooth® devices. (For further details,
please read the operating instructions of your cell phone).
9)
From the list of devices found, select the "H904".
10)
If required, enter the PIN code "0000" and confirm the
entry. If the pairing process was successful, you will hear a
-8-
11)
signal tone and the indicator lights blue for 3 seconds.
(Note: The PIN code is preprogrammed and cannot be
changed.)
After pairing, the H904 automatically connects with the
cell phone. For some cell phones you have to manually
confirm the connection. Once paired, the headset will
change to standby mode and the indicator light will flash
blue 2 times every 5 seconds.
NOTE:
If pairing is not completed within 2 minutes, the headset will turn
off. If this happens, repeat the pairing process.
7.
Switch the headset on /off
Switch on your headset
Long press the Answer button for 3s to turn on your headset. If
your headset has completed the pairing process successfully,
-9-
when the headset is turned on, it will connect to the phone you
last connected automatically. Please ensure your phone's
Bluetooth® function is active.
Switch off the headset
Long press the power button for 4s to turn off the headset. the
Red indicator will flash red.
Note:
To conserve power, if the headset is not connected to a device for
approximately 10 minutes, the headset will turn off
automatically.
8.
Wearing your headset
According to your preference, you can
wear the headset on your left or right
ear. The adjustable ear hook design
allows for a comfortable fit.
- 10 -
9.
Using the H904
Voice‐Dialing
In standby mode, press the Answer button shortly to activate the
voice assistant of the cellphone for voice dial even other voice
commands.
Note: the voice dialing is available only for the first device if two
Mobile phones are connected. The connection sequence can be
determined by reconnect manually.
Last number re‐dialing
In standby mode, double press the Answer button, the last
number you dialed will be re‐dialed.
Note: If two Mobile phones are connected with the H904hold the
Volume (‐) button for 2 seconds to dial the last number of the
- 11 -
second device.
The connection sequence can be determined by reconnect
manually.
Answering a call
Press Answer button shortly to answer the incoming call.
Reject an incoming call
Press and hold Answer button for 3 seconds to reject the
incoming call.
Transferring a call
Press and hold Volume (+) for 3 seconds to transfer the call
between the phone and headset.
Ending a call
Press the Answer button shortly to end a call.
Call‐waiting
‐ If there is an incoming call while a call is in progress, press
- 12 -
Answer button shortly to accept the waiting call and end current
calling.
‐ If there is an incoming call while a call is in progress, press and
hold Answer button for 3 seconds to accept the incoming call
and place the current call on hold.
Note:
The same operation could be performed in case of
Multi‐connection.
Volume adjusting
Press the Volume(+) and Volume(‐) button to adjust the volume.
Mute
While a call is in progress, press and hold Volume decrease
button for 2s to mute the headset, a remindful tone would be
heard every 10 seconds. Repeat the operation to un‐mute.
Streaming music
- 13 -
The H904 supports A2DP profile that allows for wireless
streaming of stereo music from a phone or other Bluetooth
enabled music device. The music will pause automatically while a
call is dialed out/incoming, and resume when the call
conversation has ended.
10.
Safety and general information
1)
Please read this User's Manual carefully and follow all
instructions.
To avoid any damage or malfunction of the device do not
drop the device from high places.
Keep device away from humidity, water and any other
liquid. If the device is exposed to water, moisture and
other liquids do not operate it to avoid any electrical
shock, explosion and damage to the device or yourself.
Do not place or keep this device near any heat sources,
2)
3)
4)
- 14 -
5)
6)
7)
8)
9)
10)
11.
such as, direct sunlight, radiators, stoves or other
apparatus that produce heat. This may cause an explosion,
degrade the performance and/or reduce battery life.
Do not modify, repair or disassemble device (Especially
the battery). Doing this will void the warranty.
Do not place heavy objects on the device.
Use only the supplied and approved chargers.
Please contact the retailer for replacement or support
with this product.
Unplug this device when unused for long periods of time
or during lightning storms.
The battery used in this device may present a risk of fire or
chemical burn if mistreated.
SRRC Declaration of Conformity
This product is SRRC certified according to the provision of Radio
- 15 -
Type Approval Certification issued by State Radio Regulatory
Commission of the People’s Republic of China.
12.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
13.
EC Declaration of Conformity
Operation is subject to the following two conditions:
- 16 -
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY interference,
for example RADIO or TV interference, caused by unauthorized
modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment. This product is CE certified according to the provision
of the R&TTE Directive (99/5/EC). This declares that this product
is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. Please note that this
product uses radio frequency bands not harmonized within EU.
Within the EU this product is intended to be used in Austria,
Belgium, Denmark, Finland, France, Germany, Greece, Ireland,
Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden,
and United Kingdom and within EFTA in Iceland, Norway and
- 17 -
Switzerland.
14.
Warranty
The condition of this warranty and supplier's responsibilities
under this warranty are as follows:
Warranty is non‐transferable and is limited to the original
purchaser only.
‐ You must be able to prove the date of original purchase of the
unit with a dated receipt.
‐ The warranty is not applicable if the product has been subject
to physical abuse, improper installation, modification or repair by
an unauthorized third party.
‐ Supplier's responsibility shall be limited to the repair or
replacement of the product at its sole discretion.
‐ Specifically exempt from any warranty are limited‐life
consumable components subject to normal wear and tear such
- 18 -
as batteries, decorates and other accessories.
‐ Supplier is not responsible, for failure resulting from accident,
abuse, misuse, or any unauthorized repair, or modification.
‐ Modification and repair of the unit should be done by an
authorized and qualified service center or returned to the
manufacturer.
‐ This warranty gives you specific legal rights, and you may also
have other rights, which vary under local laws.
‐ To replace a defective device please contact customer service .
Visit our website for more information
Bluetooth® is a trademark owned by the Bluetooth® SIG, Inc.
- 19 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : Administrator
Create Date                     : 2017:06:02 10:47:03+08:00
Modify Date                     : 2017:06:02 10:47:03+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : Microsoft Word - H904?user?manual
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Document ID                     : uuid:18ecee71-544d-492c-a52f-360cb4b47ad1
Instance ID                     : uuid:2399ade4-c589-49a6-bf19-88de9cb954fc
Page Count                      : 19

EXIF Metadata provided by EXIF.tools