ATI Electronics SH042 Bluetooth Headset User Manual

ATI Electronics (Shenzhen) Co. Ltd Bluetooth Headset Users Manual

Users Manual

Vivitar® Infinite BH-C26 Bluetooth® Headphones User GuideThank you for purchasing the Vivitar® Infinite BH-C26 Bluetooth® Headphones. IntroduconWith these headphones, you will enjoy listening to high quality music wirelessly using Bluetooth® technology. Easily connect to any mobile phone for both conversaon and music listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR specificaon and HSP, HFP, A2DP and AVRCP profiles).Specificaons• Bluetooth Specificaon: V2.1+EDR• Operaon Frequency: 2.402-2.48GHz• Supported Profile: HSP, HFP, A2DP, AVRCP• Operaon Range: Up to 33 feet (10 meters) • Talk Time: 4 hours• Play Time: 3 hours• Standby Time: 7 hours• Baery Type: 120mAh, 3.7V, Polymer Lithium Ion Baery• Charge Time: 2 HoursIn the Box• BH-C26 Bluetooth® headphones• USB Charging Cable• User ManualSafety Precauons• Please read this User Manual carefully and follow all instrucons.• To avoid damage or malfuncon of the headphones do not drop them from high locaons and/or on to hard surfaces, do not place heavy objects on them.• Keep headphones away from humidity, water and other liquids. If they get wet, do not operate as this may cause an electrical shock, explosion and damage to the device or to the user.• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves or any other apparatus that produces heat. This may cause an explosion, degrade the performance and/or reduce baery life.• Do not modify, repair or disassemble device (especially the baery). Doing so will void the warranty. The baery in this device may present a risk of fire or chemical burns if misused or tampered with.• Use only supplied and manufacturer-approved chargers and unplug this device when not in use for long periods of me or during lightning storms.
FCC and IC StatementOperaon is subject to the following two condions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operaon.Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modificaons to this equipment. Such modificaons could void the user's authority to operate the equipment.EC Declaraon of ConformityOperaon is subject to the following two condions:1. This device may not cause harmful interference.2. This device must accept any interference received, including interference that may cause undesired operaon.Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV interference, caused by unauthorized modificaons to this equipment. Such modificaons could void the user's authority to operate the equipment. This product is CE cerfied according to the provision of the R&TTE Direcve (99/5/EC). This declares that this product is in compliance with the essenal requirements and other relevant provisions of Direcve 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland.Locaon of Controls (Drawing FPO)① Next Track / Volume +② Power / Play / Pause / Answer③ Previous Track / Volume –④ Charging Port⑤ Auxiliary Port⑥ Microphone⑦ Indicator LED①②③④⑤⑥⑦
First Time UseCharging the BaeryThe BH-C26 Headphones have a built-in, rechargeable lithium-polymer baery. To avoid damage, do not aempt to remove the baery. The full performance of the baery is achieved aer two or three charging-discharging cycles. Charge the baery fully before first use.1. Connect the USB cable to the headphones.2. Connect to the correct outlet (wall, computer, car charger).3. When the charger is connected to the headphones, the red indicator light will turn on. Note: Charging the baery fully may take up to 2 hours.4. When the baery is fully charged, the red indicator light will turn off. Disconnect the charger from the headset and the outlet. The headset is ready for use.Note: Overcharging could reduce the life of the baery. A charged baery will lose its capacity if it is not used on a regular basis.Important!Ensure that the baery is fully charged if the headphones are not used for a long period of me. To avoid a complete discharge of the baery, charge the headphones at least every six (6) months.Baery Notes• A fully charged baery provides up to four (4) hours of talk-me, three (3) hours music playback, and up to seven (7) hours of standby me. Talk and standby mes vary depending on mobile phones or other compable Bluetooth® devices, sengs, styles, etc.• When the baery power is low, the headset will beep every 30 seconds and the red indicator light will flash every seven (7) seconds.• When using with your iPhone, an addional baery meter feature will display the remaining baery on your phone’s touch screen.Pairing with your Phone1. Place the headphones in close range of a Bluetooth®-enabled mobile phone.2. Press and hold POWER buon for three (3) seconds. Unl indicator lights flash blue and red.3. Set your mobile phone to pairing mode (as explained in operang instrucons for your phone) and search for Bluetooth® devices.4. Select "Vivitar HP" from the list shown on your phone.5. If requested, enter the PIN code "0000" and confirm the entry. Once the pairing is successful, the BH-C26 connects to your phone automacally before switching to standby mode. The indicator will blink blue twice every three (3) seconds.Note: If pairing is not completed within two (2) minutes, the headset will enter standby mode. If this happens, turn the headset off and repeat the pairing steps above.
General OperaonTurning ON/OFF1. Press and hold the POWER buon for three (3) seconds to turn the headphones ON. If pairing was successful (instrucons above), the headphones will remain paired to your mobile device.2. Press and hold the POWER buon for seven (7) seconds to turn the headphones OFF.Note: The headphones will turn OFF automacally when not connected to a mobile device for approximately ten (10) minutes.Music Playback (Picture FPO)• Play/Pause buon: Press to play or pause music playback.• Next Track / Volume + buon: Press to increase sound level. Press and hold to skip to the next track.• Previous Track / Volume – buon: Press to decrease the sound level. Press and hold to return to the previous track.Using the Phone Funcon (Picture FPO)• Last Number Re-dial: In standby mode, press the ANSWER buon twice to re-dial the last number called. • Answering a Call: Short press the ANSWER buon to answer an incoming call.• Reject an Incoming Call: Press and hold the ANSWER buon for two (2) seconds to reject an incoming call.• Transferring a Call: Press and hold Next Track / Volume + buon for two (2) seconds to transfer a call from the phone to headphones.• Ending a Call: Short Press the ANSWER buon to end a call.• Call Waing: If there is an incoming call while a call is already in progress there are two opons: Answer the incoming call ending the current call; or answer the incoming call placing the current call on hold.� To answer the incoming call and end the current call, short press the ANSWER buon.� To answer the incoming call and place the current call on hold, press and hold the ANSWER buon. To return to the call on hold, press and hold the ANSWER buon again.Warranty InformaonThis warranty is non-transferable and is limited only to the original purchaser. The condions of this warranty and supplier's responsibilies under this warranty are as follows:• You must be able to prove the date of original purchase of the unit with a dated receipt.• The warranty is not applicable if the product has been subject to physical abuse, improper installaon, modificaon or repair by an unauthorized third party.① Next Track / Volume +② Play/Pause③ Previous Track / Volume –② Answer⑥ Microphone
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole discreon.• Specifically exempt from any warranty are limited-life consumable components subject to normal wear and tear such as baeries, decorates and other accessories.• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any unauthorized repair, or modificaon.• Modificaon and repair of the unit should be done by an authorized and qualified service center or returned to the manufacturer.• This warranty gives you specific legal rights, and you may also have other rights, which vary under local laws.What is CoveredThis warranty covers for the original consumer purchaser only and is not transferable. Products that fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship will be repaired at no charge for parts or labor for a period of one year from the me of purchase.What is NOT CoveredDamages or malfuncons not resulng from defects in material or workmanship and damages or malfuncons from other than normal use, including but limited to, repair by unauthorized pares, tampering, modificaon or accidents.Service and ReturnsWhen returning a defecve product (postage pre-paid) for service, the package should include:1. Copy of original bill of sale.2. A detailed wrien descripon of the problem.3. Your return address and telephone number (Dayme).Where to send defecve productsUnited States United Kingdom / Europe AustraliaSakar Internaonal Sakar Internaonal Return faulty device to theAenon: Service Department Aenon: Service Department Refund Counter at the store195 Carter Drive 2D, Siskin Parkway East where the product wasEdison, NJ 08817 4020 Middlemarch Business Park purchased. Coventry, CV3 4PETechnical SupportFor technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ’s are available on line. If you can’t find what you are looking for, e-mail us at support@vivitar.com where one of our technical support team members will help you. US phone: 1-800-592-9541; UK phone: 0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries can be found at:www.vivitar.com.

Navigation menu