ATI Electronics SH042 Bluetooth Headset User Manual
ATI Electronics (Shenzhen) Co. Ltd Bluetooth Headset Users Manual
Users Manual
Vivitar® Infinite BH-C26 Bluetooth® Headphones
User Guide
Thank you for purchasing the Vivitar® Infinite BH-C26 Bluetooth® Headphones.
Introducon
With these headphones, you will enjoy listening to high quality music wirelessly using
Bluetooth® technology. Easily connect to any mobile phone for both conversaon and music
listening. It also pairs with other Bluetooth-enabled devices (Bluetooth V2.1+EDR specificaon
and HSP, HFP, A2DP and AVRCP profiles).
Specificaons
• Bluetooth Specificaon: V2.1+EDR
• Operaon Frequency: 2.402-2.48GHz
• Supported Profile: HSP, HFP, A2DP, AVRCP
• Operaon Range: Up to 33 feet (10 meters)
• Talk Time: 4 hours
• Play Time: 3 hours
• Standby Time: 7 hours
• Baery Type: 120mAh, 3.7V, Polymer Lithium Ion Baery
• Charge Time: 2 Hours
In the Box
• BH-C26 Bluetooth® headphones
• USB Charging Cable
• User Manual
Safety Precauons
• Please read this User Manual carefully and follow all instrucons.
• To avoid damage or malfuncon of the headphones do not drop them from high locaons
and/or on to hard surfaces, do not place heavy objects on them.
• Keep headphones away from humidity, water and other liquids. If they get wet, do not
operate as this may cause an electrical shock, explosion and damage to the device or to the
user.
• Do not place or keep this product near heat sources, such as direct sunlight, radiators, stoves
or any other apparatus that produces heat. This may cause an explosion, degrade the
performance and/or reduce baery life.
• Do not modify, repair or disassemble device (especially the baery). Doing so will void the
warranty. The baery in this device may present a risk of fire or chemical burns if misused or
tampered with.
• Use only supplied and manufacturer-approved chargers and unplug this device when not in
use for long periods of me or during lightning storms.
FCC and IC Statement
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such modificaons
could void the user's authority to operate the equipment.
EC Declaraon of Conformity
Operaon is subject to the following two condions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operaon.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modificaons to this equipment. Such modificaons
could void the user's authority to operate the equipment. This product is CE cerfied
according to the provision of the R&TTE Direcve (99/5/EC). This declares that this product
is in compliance with the essenal requirements and other relevant provisions of Direcve
1999/5/EC. Please note that this product uses radio frequency bands not harmonized within
EU. Within the EU this product is intended for use in Austria, Belgium, Denmark, Finland,
France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain,
Sweden, and United Kingdom and within EFTA in Iceland, Norway and Switzerland.
Locaon of Controls (Drawing FPO)
① Next Track / Volume +
② Power / Play / Pause / Answer
③ Previous Track / Volume –
④ Charging Port
⑤ Auxiliary Port
⑥ Microphone
⑦ Indicator LED
①
②
③
④
⑤
⑥
⑦
First Time Use
Charging the Baery
The BH-C26 Headphones have a built-in, rechargeable lithium-polymer baery. To avoid
damage, do not aempt to remove the baery. The full performance of the baery is achieved
aer two or three charging-discharging cycles. Charge the baery fully before first use.
1. Connect the USB cable to the headphones.
2. Connect to the correct outlet (wall, computer, car charger).
3. When the charger is connected to the headphones, the red indicator light will turn on.
Note: Charging the baery fully may take up to 2 hours.
4. When the baery is fully charged, the red indicator light will turn off. Disconnect the charger
from the headset and the outlet. The headset is ready for use.
Note: Overcharging could reduce the life of the baery. A charged baery will lose its capacity
if it is not used on a regular basis.
Important!
Ensure that the baery is fully charged if the headphones are not used for a long period of
me. To avoid a complete discharge of the baery, charge the headphones at least every six (6)
months.
Baery Notes
• A fully charged baery provides up to four (4) hours of talk-me, three (3) hours music
playback, and up to seven (7) hours of standby me. Talk and standby mes vary depending
on mobile phones or other compable Bluetooth® devices, sengs, styles, etc.
• When the baery power is low, the headset will beep every 30 seconds and the red indicator
light will flash every seven (7) seconds.
• When using with your iPhone, an addional baery meter feature will display the remaining
baery on your phone’s touch screen.
Pairing with your Phone
1. Place the headphones in close range of a Bluetooth®-enabled mobile phone.
2. Press and hold POWER buon for three (3) seconds. Unl indicator lights flash blue and red.
3. Set your mobile phone to pairing mode (as explained in operang instrucons for your
phone) and search for Bluetooth® devices.
4. Select "Vivitar HP" from the list shown on your phone.
5. If requested, enter the PIN code "0000" and confirm the entry. Once the pairing is successful,
the BH-C26 connects to your phone automacally before switching to standby mode. The
indicator will blink blue twice every three (3) seconds.
Note: If pairing is not completed within two (2) minutes, the headset will enter standby mode.
If this happens, turn the headset off and repeat the pairing steps above.
General Operaon
Turning ON/OFF
1. Press and hold the POWER buon for three (3) seconds to turn the headphones ON. If
pairing was successful (instrucons above), the headphones will remain paired to your
mobile device.
2. Press and hold the POWER buon for seven (7) seconds to turn the headphones OFF.
Note: The headphones will turn OFF automacally when not connected to a mobile device for
approximately ten (10) minutes.
Music Playback (Picture FPO)
• Play/Pause buon: Press to play or
pause music playback.
• Next Track / Volume + buon: Press to
increase sound level. Press and hold to
skip to the next track.
• Previous Track / Volume – buon:
Press to decrease the sound level. Press
and hold to return to the previous track.
Using the Phone Funcon (Picture FPO)
• Last Number Re-dial: In standby mode, press the
ANSWER buon twice to re-dial the last number called.
• Answering a Call: Short press the ANSWER buon to
answer an incoming call.
• Reject an Incoming Call: Press and hold the ANSWER
buon for two (2) seconds to reject an incoming call.
• Transferring a Call: Press and hold Next Track / Volume
+ buon for two (2) seconds to transfer a call from the
phone to headphones.
• Ending a Call: Short Press the ANSWER buon to end a call.
• Call Waing: If there is an incoming call while a call is already in progress there are two
opons: Answer the incoming call ending the current call; or answer the incoming call placing
the current call on hold.
� To answer the incoming call and end the current call, short press the ANSWER buon.
� To answer the incoming call and place the current call on hold, press and hold the ANSWER
buon. To return to the call on hold, press and hold the ANSWER buon again.
Warranty Informaon
This warranty is non-transferable and is limited only to the original purchaser. The condions of
this warranty and supplier's responsibilies under this warranty are as follows:
• You must be able to prove the date of original purchase of the unit with a dated receipt.
• The warranty is not applicable if the product has been subject to physical abuse, improper
installaon, modificaon or repair by an unauthorized third party.
① Next Track / Volume +
② Play/Pause
③ Previous Track / Volume –
② Answer
⑥ Microphone
• Supplier's responsibility shall be limited to the repair or replacement of the product at its sole
discreon.
• Specifically exempt from any warranty are limited-life consumable components subject to
normal wear and tear such as baeries, decorates and other accessories.
• Supplier is not responsible, for failure resulng from accident, abuse, misuse, or any
unauthorized repair, or modificaon.
• Modificaon and repair of the unit should be done by an authorized and qualified service center
or returned to the manufacturer.
• This warranty gives you specific legal rights, and you may also have other rights, which vary
under local laws.
What is Covered
This warranty covers for the original consumer purchaser only and is not transferable. Products
that fail to funcon properly UNDER NORMAL USAGE, due to defects in material or workmanship
will be repaired at no charge for parts or labor for a period of one year from the me of purchase.
What is NOT Covered
Damages or malfuncons not resulng from defects in material or workmanship and damages or
malfuncons from other than normal use, including but limited to, repair by unauthorized pares,
tampering, modificaon or accidents.
Service and Returns
When returning a defecve product (postage pre-paid) for service, the package should include:
1. Copy of original bill of sale.
2. A detailed wrien descripon of the problem.
3. Your return address and telephone number (Dayme).
Where to send defecve products
United States United Kingdom / Europe Australia
Sakar Internaonal Sakar Internaonal Return faulty device to the
Aenon: Service Department Aenon: Service Department Refund Counter at the store
195 Carter Drive 2D, Siskin Parkway East where the product was
Edison, NJ 08817 4020 Middlemarch Business Park purchased.
Coventry, CV3 4PE
Technical Support
For technical support issues, visit our website at www.vivitar.com. Manuals, soware and FAQ’s
are available on line. If you can’t find what you are looking for, e-mail us at support@vivitar.com
where one of our technical support team members will help you. US phone: 1-800-592-9541; UK
phone: 0800 917 4831; Australia phone: 1800-006-614. Telephone numbers from other countries
can be found at:
www.vivitar.com.