ATI Electronics SH805C Bluetooth Headset User Manual SH805C UserManualx

Download:
Mirror Download [FCC.gov]
Document ID	2979005
Application ID	DB7mt/TjYEFdd1q7TK/o/w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	17.63kB (220430 bits)
Date Submitted	2016-05-04 00:00:00
Date Available	2016-05-06 00:00:00
Creation Date	2016-04-29 10:12:26
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2016-04-29 10:12:26
Document Title	Microsoft Word - SH805C UserManual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Administrator

Bluetooth Stereo Earphones
Operation Manual
Thank you for purchasing theSH805C Bluetooth Stereo
Earphones. Please read all instructions carefully before
using and retain this manual for future use and
reference.
PACKAGE CONTENTS
. Bluetooth Stereo Earphones
. USB Charging Cable
. 1Extra Sets of Ear Cushions
. Operation Manual
KEY FEATURES
. Compatible with Bluetooth‐enabled devices
. Built‐in rechargeable battery
. Volume control
SAFETY INSTRUCTIONS
Keep the unit away from heat sources. Direct sunlight，
humidity，water and any other liquids.
Do not operate the unit of it has been exposed to water,
moisture or any other liquids to prevent against electric
shock, explosion and/or injury to yourself and damage
to the unit.
Do not use the unit if it has been dropped or damaged
in any way.
Repairs to electrical equipment should only be
performed by a qualified electrician. Improper repairs
may place the user at serious risk.
Do not puncture or harm the exterior surface of the
product in any way.
Keep the unit free from dust. lint. etc.
Do not use this unit for anything other than its intended
use or purpose. Doing so may damage the device.
This product is not a toy. Keep out of reach of children.
Do not use the headset at excessive levels as this may
damage hearing.
Do not expose batteries, battery pack, or batteries to
installed to excessive heat, such as direct sunlight or
open flame.
FEATURES/PARTS
I . Power On/Off
Multifunction Button
Answer/End Cal
2. Indicator LED
3. Volume Up/Next Track
4. Volume Down/Previous Track
5. Charging Port
6. Microphone
CHARGING THE EARPHONES
The earphones come with a built‐in rechargeable
battery. Before using it for the first time, we recommend
you charge the battery fully. Only use the supplied USB
cable to charge the headphones.
Connect the USB cable to a computer USB port and the
USB plug to the charging jack of the headset. The red
LED light will illuminate while the earphones are
charging A full charge of the battery takes around 2
hours. When the battery is fully charged, the LED light
will turn blue.
Disconnect the headset at this point. The headset will
then be ready for use.
When the battery is low, the LED will flash red and emit
Voice prompt every 20 seconds. When this occurs,
please recharge the headset.
When using your earphones with an iPhone, the top
right corner will indicate your ear bud's battery life.
VOICE PROMPT
The earphone will notify you of status by tones“Power
On", “Power Off", And “Pairing code" “connected;
when applicable.
TURNING HEADSET ON/OFF
Power On: Press and hold the Power On/Off button for
3seconds until the LED flashes blue.
Power Off: Press and hold the Power On/Off button for
5seconds until the LED flashes red.
In order to save power, the headset will automatically
turn off if not paired with a device after 10 minutes.
PAIRING THE EARPHONES
1 . Ensure the earphones are turned off. If they are not,
please turn off the earphones first before pairing.
2. Press and hold the Power On/Off button for
5‐7seconds until the LED flashes red and blue. This will
indicate your earphones are now in pairing mode.
3. Place the earphones and the Bluetooth device to
which you would like to pair it within the operating
distance. We recommend keeping the two devices no
further than 3 feet apart.
4. Ensure Bluetooth is enabled on your phone or music
device. Refer to the manufacturer's instructions for how
to enable Bluetooth on your device.
5. Once you have activated Bluetooth on your device,
select the earphones 'MERKURY BTE41' from the list
of available Bluetooth devices.
6. Please note, pairing mode on the earbuds will last for
two minutes. If no devices are paired after two minutes,
the earphones will automatically switch off.
7. If pairing is unsuccessful, turn off the earphones first
and repair following the aforementioned steps. Once
you have paired the earphones with a device. The
earphones will remember this device and will pair
automatically when the device's Bluetooth is activated
and in range. You do not need to re‐pair any previously
connected devices.
Your earbud can pair up to two multi‐point devices. You
can reconnect a previously paired device without going
through the pairing or PIN process on up to two devices.
During use, the battery life of your earphones is visible
on your iPhone or iPad screen.
LISTENING TO MUSIC
Once the earphones are paired to your device, you can
stream music wirelessly to the earphones. Select the
track you wish to listen to on your device to listen via
earphones. Should you encounter any problems while
streaming, please refer to your device's user manual.
MANUAL KEY FUNCTIONS
Your earphones are equipped with a few shortcut keys.
Please note the following functions.
1. Increase Volume: Press the Vol + Button once
2. Decrease Volume: Press the Vol ‐ Button once
3. Play/Pause: Press the Multifunction Button
4. Previous Track: double press the the Vol ‐ Button
5. Next Track: double press the Vol + Button
CARE AND MAINTENANCE
. Do not expose the headset to liquid, moisture, or
humidity to avoid damage to the product's intimal
circuitry.
. Do not use abrasive cleaning solvents to dean the
unit.
. Do not expose the headset to extremely high or low
temperatures as this will shorten the life of the
electronic device, destroy the battery, and/or distort
certain plastic parts.
. Do not dispose of the earphones in fire as they may
explode or combust.
. Do not expose the earphonesto contact with sharp
objects as this will cause scratches and damage
. Do not let the earphones fall from high places. as
doing so may damage the internal circuitry.
. Do not attempt to disassemble the earphones. In the
event that the earphones do not function properly
return it to the store where it was purchased.
SPECIFICATIONS
Bluetooth:V3.0 + EDR, Class II
Bluetooth Profiles: HSP, HFP, A2DP and AVRCP
Operating Distance: Up to 33ft (10 m)
Play Time: Up to 4 Hours
Talk Time: Up to 5 Hours
Standby Time: Up to 100 Hours
Charging Input: DC 5V
Charging Time: 2 Hours
Warranty
The condition of this warranty and supplier's
responsibilities under this warrant/ are as follows:
Warranty is non‐transferable and is limited to the
original purchaser only.
‐ You must be able to prove the date of original
purchase of the unit with a dated receipt.
‐ The warranty is not applicable if the product has been
subject to physical abuse, improper installation,
modification or repair by an unauthorized third party.
‐ Supplier's responsibility shall be limited to there pair
or replacement of the product at if’s sole discretion.
‐ Specifically exempt from any warranty are limited‐life
consumable components subject to normal wear and
tear such as batteries, decorates and other accessories.
‐ Supplier is not responsible, for failure resulting from
accident, abuse, misuse, or any unauthorized repair or
modification.
‐ Modification and repair of the unit should be done by
an authorized and qualified service center or returned
to the manufacturer.
‐ This warranty gives you specific legal rights, and you
may also have other rights, which vary under local laws.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for
help.
NOTE 2: Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2016:04:29 10:12:26+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2016:04:29 10:12:26+08:00
Format                          : application/pdf
Title                           : Microsoft Word - SH805C UserManual.docx
Creator                         : Administrator
Document ID                     : uuid:46918dac-2087-4724-be5b-0bc85d99a247
Instance ID                     : uuid:6b53ded1-6c3b-450a-9e83-25c43b8511ff
Page Count                      : 19
Author                          : Administrator

EXIF Metadata provided by EXIF.tools