ATTOWAVE STR65 RADAR DETECTOR User Manual S650 manual E

ATTOWAVE CO., LTD. RADAR DETECTOR S650 manual E

User Manual

Download: ATTOWAVE STR65 RADAR DETECTOR User Manual S650 manual E
Mirror Download [FCC.gov]ATTOWAVE STR65 RADAR DETECTOR User Manual S650 manual E
Document ID1261717
Application IDY3em7hSqnx1IUYIHpqN5Zg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize71.56kB (894528 bits)
Date Submitted2010-04-05 00:00:00
Date Available2010-04-05 00:00:00
Creation Date2010-03-04 14:32:44
Producing SoftwareAFPL Ghostscript 8.13
Document Lastmod2010-04-02 15:23:19
Document TitleMicrosoft Word - S650_manual_E.doc
Document CreatorPrimoPDF http://www.primopdf.com
Document Author: cho

OWNER’S MANUAL
STINGER S650
ALL-BAND RADAR AND LASER DETECTOR
WITH VG-2, POP™
ULTRA-K
MODES
AND ULTRA-X /
RADAR DETECTION
Contents
• Contents
• Congratulations!
• Package Contents
• Identifying parts of the unit
• Basic Features and Controls
• Feature descriptions
• Installing the Unit
Mounting guidelines
Windshield mounting
Hook-and-Loop Mounting
Changing the Panel
• Operation
• Power On
• Volume control
• Blue backlit display
• Mute on/off selection (Mute mode)
• Highway/City mode selection
• Tutorial mode
• Compass Calibration Set-up
• Menu Mode
1. Voice Alert Language selection
2. VG-2 detection On/Off selection
3. Voice Alert On/Off selection
4. Tone selection
5. Compass display selection
• Pulse Protection
• Memory confirmation
• Troubleshooting
• Care and Maintenance
• Specifications
Stinger S650
Radar detector
10
10
11
11
11
11
11
11
11
12
13
14
Congratulations!
You have purchased the STINGER S650, the newest radar/laser detector.
The STINGER S650, incorporates the advanced new antenna technology
and extremely low power-consuming circuitry to ensure top-class
performance. The STINGER S650, is a complete integrated laser/radar
detector, which detects all police radar guns, including Ultra-X and Ultra-K
pulse mode radars, as well as laser guns.
Besides, STINGER S650 is able to detect signals of VG-2 (devices detecting
radar-detectors).
The STINGER S650, provides distinct visual and audio alerts to warn you of
the presence of X-, K-, Ka- band and VG2 radar signals as well as laser
signals in front of you for 180º round.
You can drive with confidence when you bring along the STINGER S650.
Note: Some local regions and federal regulations may prohibit the use of
detection device. Please check with authorities regarding the use of this
device in your area before operating it.
Package Contents
Your STINGER radar/laser detector package includes the following
components:
• The STINGER S650 radar/laser detector
• Changeable Panel (2ea)
• Windshield mounting bracket with suction cups (3ea) and bumper
• Coiled 12-volt DC power cord
• Dashboard mounting hook and loop fasteners (1ea)
• Operation manual
Identifying parts of the unit
Power Cord
Spare Fuse
Stinger S650
Mounting Bracket
Radar detector
Fastener Tape
Changeable Panel
STINGER 650
Basic Features and Controls
Stinger S650
Radar detector
Feature descriptions
•
•
•
•
•
•
•
•
•
•
•
•
protection against all radar bands (X, K, and super wide Ka)
360° laser coverage against all laser guns
VG-2 signal Detection Capabilities
pulse signal Detection Capabilities
digital compass display mode
city mode to virtually eliminate false radar alerts
user selectable brightness and mute on/off
power on/off and volume control wheel
BLUE BACKLIT DIGITAL Text Display
tutorial mode to demonstrate operations
memory to retain previously set operational modes after power-off
corded power connection into 12-volt car lighter socket (Power cord
included)
Installing the Unit
Mounting guidelines
The STINGER radar/laser detector can be mounted on your windshield or
dashboard using the mounting bracket and hook-and-loop fastener provided.
• Mount on the windshield in a centered location that will not obstruct the
view of the driver and is within reach, so the buttons can be easily accessed.
• Do not mount behind windshield wipers, metal surfaces, ornaments, or
mirrored sunscreen glass, as these affect radar/laser signals. Tinted glass
does not affect radar/laser signal reception.
Conceal the STINGER radar/laser detector when you leave your vehicle to
prevent theft and to minimize the unit's exposure to extreme temperatures,
which can temporarily impair performance.
Windshield mounting
1. Install the suction cups and
bumper onto the windshield
mounting bracket by sliding them
into their holes (if not pre-installed).
2. Press the bracket base firmly
against the windshield until the
suction cups securely take hold.
3. Fasten the bracket at the top sides’ slots of the unit.
Stinger S650
Radar detector
4. Bend the angle of the windshield mounting bracket, if necessary, to adjust
for best viewing and detection angle.
5. When you want to connect power from your vehicle, plug the small
connector of the power cord into the 12-volt DC power input jack located on
the side of the detector.
6. Plug the large adapter of the power cord into the lighter socket of your
vehicle.
Hook-and-Loop Mounting
The hook-and-loop tape included with your detector might be the best
mounting method for some dashboards. Follow these instructions to use the
hook-and-loop tape.
1. Use a damp cloth to thoroughly clean both the bottom of the detector and
the dashboard.
2. Peel off the tape's paper backing and apply the tape to the bottom of the
detector.
3. Remove the paper backing from the other side of the tape and press the
detector onto the dashboard.
Changing the Panel
To change the panel to another one, follow these steps.
1. Lift up the panel by forefinger or screwdriver from the slot at the mounting
bracket location. The panel will pop out as follows.
2. Insert the tap of replacing panel near the display into the unit. Gently snap
in the other taps to the back of the unit.
Stinger S650
Radar detector
Operation
Power On
Rotate the wheel controller (located on the side of the detector) until you hear
it click. The STINGER radar/laser detector goes through a self-diagnosis
sequence and displays the last mode previously set in memory.
Volume control
Use the volume thumb wheel, located on the side of the STINGER radar/laser
detector to adjust volume level.
Blue backlit display
Press DIM/MENU button to turn on the blue backlit.
Mute on/off selection (Mute mode)
Press the MUTE/CITY button repeatedly to toggle between mute on (1 beep)
and mute off (2 beep) modes. Mute on will silence the audio alarm for the
remainder of an existing signal and for any new alert received.
You may also adjust the audio level by using the volume thumb wheel.
Highway/City mode selection
Press the MUTE/CITY button for three seconds each time to toggle Highway
(2 beep) and City (1 beep) modes. The CITY mode is indicated by "CITY" at
the display.
X-band, occupied by police radar, is also shared for other uses, such as
automatic door openers like the ones used at supermarkets, burglar alarms,
terrestrial microwave emission, RF braking systems, and other devices.
In addition, other radar detectors in close proximity may falsely alert your
detector. To reduce false alerts, the STINGER radar/laser detector has city
filtering settings. City mode will give you the rejection of X-band alarms by
approximately 20%.
highway mode
city mode
H I G H W A Y Ka
Stinger S650
C I T Y X K
Radar detector
When the Compass mode is engaged, it will display a compass heading as
follows. When user changes the HIGHWAY/CITY mode, it will be displayed
‘HIGHWAY’ or ‘CITY’ for two seconds and will display compass heading again.
N E 4 5°°
Tutorial mode
The STINGER S650 radar/laser detector has a tutorial mode intended to
familiarize you with the various visual displays and distinct audible alerts the
unit performs.
To begin the tutorial mode turn the radar/laser detector on while holding the
‘DIM/MENU’ button and it will demonstrate how it operates when each radar
and laser band signal is detected.
Tutorial mode start
T u t o r i a l
X band signal detected operation
►
►►
►►►
►►►►
►►►►► 9
(weak signal)
(strong signal)
Stinger S650
Radar detector
K band signal detected operation
(weak signal)
►
►►
►►►
►►►►
►►►►► 9
(strong signal)
Ka band signal detected operation
Ka ►
Ka ►►
Ka ►►►
Ka ►►►►
Ka ►►►►► 9
(weak signal)
(strong signal)
Laser signal detected operation
L A S E R
VG-2 signal detected operation
V G - 2
It automatically exits from the end of tutorial mode and go to ‘HIGHWAY/
CITY’ mode.
Stinger S650
Radar detector
Compass Calibration Set-up
Press ‘DIM/MENU’ and ‘MUTE/CITY’ buttons simultaneously more than 2
seconds to go ‘Compass Calibration Mode’.
Perform the calibration on a level surface, following these steps:
1. When entering ‘Calibration mode’, it speaks “start your calibration”.
2. The Calibration will be continued until user presses any key. Please drive 2
circles and press any key when finished. It displays and toggles ‘Drive_2’ and
‘CIRCLE’ during drive. The size of the circles and the direction you drive does
not matter. The circles do not need to be perfect circles but must be
completed in the same direction. Each circle should take a minimum of 20
seconds but no more than 1 minute to complete.
3. In case ‘Compass Calibration’ is completed successfully, it display
‘COMPLETE’ with voice of ‘Calibration completed’ and exit automatically.
4. In case it is not completed successfully, it displays ‘CANCELLED’ and exit.
5. If any button is not pressed during one minute, the calibration is stopped
and displays ‘ERROR’ and a ‘CANCELLED’ message.
Menu Mode
Pressing ‘DIM/MENU’ button for 3 seconds to go to ‘Menu’ mode. You can set
each sub menu as follows.
Press ‘DIM/MENU’ button again to scroll each sub menu and press ‘MUTE/
CITY’ button to select sub menu. After selecting sub menu, press ‘DIM/
MENU’ button more than 3 seconds to save and exit. Otherwise it is
automatically exit after 5 seconds with selected sub menu.
SUB MENU
Language Mode
SELECTION
REMARK
[LANG:ENG] / [LANG:RUS]
ENGLISH or RUSSIAN
VG-2 Mode
[VG-2:ON] / [VG-2:OFF]
VG-2 ON or OFF
Voice Mode
[VOICEoN] / [VOICEoFF]
VOICE ON or OFF
Tone Mode
[TONE:HIG] / [TONE:LOW]
High tone or Low tone
Compass Mode
[CMPS:ON] / [CMPS:OFF]
Compass ON or OFF
Stinger S650
10
Radar detector
1. Voice Alert Language selection
The STINGER S650 has two voice versions, which are English and Russian
voice. You can select one at the Menu mode.
2. VG-2 detection On/Off selection
You can select VG-2 detection On/Off at the Menu mode. Pressing ‘DIM/
MENU’ button for 3 seconds to go to ‘Menu’ mode.
3. Voice Alert On/Off selection
You can select Voice Alert On/Off at the Menu mode. When the detector is set
to VOICE ON, you will be notified by voice and visual alerts. VOICE OFF
turns off all alert-related voice messages but does not affect any other voice
messages.
4. Tone selection
The STINGER S650 has two tones of alarm sound (High/ Low). You can set it
at the Menu mode.
5. Compass display selection
You can select Compass display at the Menu mode. It displays as follows
when selected.
N E 4 5°°
S E 1 6 5°°
Pulse Protection
Pulse (or instant-on) radar is more difficult to detect than conventional radar
because it remains “off” until activated to measure the speed of a targeted
vehicle.
When a pulse type transmission is detected, your STINGER detector sounds
an urgent audio warning and flashes the Alert strength indicators at their
fastest rate.
Memory confirmation
It will automatically remember your last settings when the unit is turned off or
removed from the power. All features selected are retained in the memory
except MUTE. Whenever it resets the power, it makes MUTE OFF.
Stinger S650
11
Radar detector
Troubleshooting
If the detector does not turn on:
• Make sure that the POWER is in the ON position.
• Check the power cord or battery. Be sure all power connectors are properly
installed.
• Check the fuse that controls power to the cigarette lighter socket. See your
vehicles owner's manual.
• The cigarette lighter socket might be dirty. Clean it with fine emery cloth to
ensure a good, clean connection.
• Vehicle electrical problem exists.
Caution: Do not place any metal object other than the cigarette lighter or a
cigarette lighter plug in the cigarette lighter socket. Doing so could blow a
fuse in your vehicle or cause the metal object to become very hot.
If the detector gives a false alert when the vehicle hits or bumps:
• Check the vehicle's electrical system, including main battery cable and
alternator connections.
• Install a filter capacitor (470uF/25volts) on the back of the cigarette lighter
socket across the power connections.
If the receiving signals are weak:
• Check the angle of detector.
• Point to the horizon.
• Radar antenna / laser sensor is obstructed.
• Relocate the detector clear of any obstruction outside the windshield, such
as a wiper blade (see mounting manual).
Stinger S650
12
Radar detector
Care and Maintenance
Here are some tips to help you care for your STINGER S650:
• To prevent theft, remove your STINGER radar/laser detector from your
windshield or dashboard when you leave your vehicle.
• Avoid extended exposure to direct sunlight. Remove your STINGER
radar/laser detector from your windshield when your vehicle is parked for an
extended period of time. On hot days the temperature inside your vehicle
can reach levels that could damage your STINGER radar/laser detector.
• Do not expose the STINGER radar/laser detector to rain, moisture, spray
cleaners, or liquids that could damage the internal circuitry of the detector.
Fuse replacement
The lighter socket adapter of the power cord has a replaceable 2-Amp SAG
fuse located below the silver tip. To check or replace the fuse:
• slowly and carefully unscrew the tip of the plug, making sure the spring and
silver tip located inside the plug do not fly out when you remove the cap.
• Check fuse and replace if necessary.
Stinger S650
13
Radar detector


Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
XMP Toolkit                     : 3.1-701
Create Date                     : 2010:03:04 14:32:44Z
Creator Tool                    : PrimoPDF http://www.primopdf.com
Modify Date                     : 2010:04:02 15:23:19+09:00
Metadata Date                   : 2010:04:02 15:23:19+09:00
Format                          : application/pdf
Creator                         : cho
Title                           : Microsoft Word - S650_manual_E.doc
Producer                        : AFPL Ghostscript 8.13
Document ID                     : uuid:e0a8d6e5-74aa-415b-83bc-4f34ba7a4c55
Instance ID                     : uuid:132ad0dd-f5f0-4331-b1d7-d17bd672ffa2
Page Count                      : 14
Author                          : cho
EXIF Metadata provided by EXIF.tools
FCC ID Filing: W75-STR65

Navigation menu