ATake Digital Technology AWD-23TBT Bluetooth Speaker User Manual Dancing

ATake Digital Technology (ShenZhen) Co., Ltd. Bluetooth Speaker Dancing

user manual

USER MANUELAUDIOINUSBPOWERPOWER SUPPLYThe speaker can only operate on plug-in USB power.Please connect the USB socket with PC or adapterthrough supplied USB cable.PLAY FROM AN EXTERNAL DEVICEStep 1: Connect your speaker with an externaldevice via the supplied audio cable.Step 2: Start playing music and adjust the volumesand tracks on your device.PLAY FROM A BLUETOOTH DEVICEStep 1: Connect two speakersStep 2: Activate the Bluetooth function in your Bluetooth deviceStep 3: Select “ DE 23TBT ” on your Bluetoothdevice for pairing. (For some devices,you may need to input “0000” as pairingpassword.)Step 4: Start playing music on your Bluetoothdevice.Note: The effecitve operating range between the speaker and your Bluetooth device is approximately 10 meters (about 30 feet).To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. No sound• Adjust volume on your mobile phone or PC/Mac.• Make sure that your Bluetooth mobile phone is within the effective operation range.• Check if you have selected the correct audio source.No response from the speaker• Restart the speaker.Warning•Never remove the casing of this apparatus.TROUBLESHOOTINGDE 23TBTWATER DANCES TO THE PULSE OF YOUR TUNESBleed5.75 x 8.25
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for helpChanges or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu