ATake Digital Technology AWD-23TBT Bluetooth Speaker User Manual Dancing
ATake Digital Technology (ShenZhen) Co., Ltd. Bluetooth Speaker Dancing
user manual
USER MANUEL
AUDIO
IN
USB
POWER
POWER SUPPLY
The speaker can only operate on plug-in USB power.
Please connect the USB socket with PC or adapter
through supplied USB cable.
PLAY FROM AN EXTERNAL DEVICE
Step 1: Connect your speaker with an external
device via the supplied audio cable.
Step 2: Start playing music and adjust the volumes
and tracks on your device.
PLAY FROM A BLUETOOTH DEVICE
Step 1: Connect two speakers
Step 2: Activate the Bluetooth function in
your Bluetooth device
Step 3: Select “ DE 23TBT ” on your Bluetooth
device for pairing. (For some devices,
you may need to input “0000” as pairing
password.)
Step 4: Start playing music on your Bluetooth
device.
Note: The effecitve operating range between the speaker and
your Bluetooth device is approximately 10 meters (about 30 feet).
To keep the warranty valid, never try to repair the system yourself.
If you encounter problems when using this apparatus, check the following points before requesting service.
No sound
• Adjust volume on your mobile phone or PC/Mac.
• Make sure that your Bluetooth mobile phone is within the effective operation range.
• Check if you have selected the correct audio source.
No response from the speaker
• Restart the speaker.
Warning
•Never remove the casing of this apparatus.
TROUBLESHOOTING
DE 23TBT
WATER DANCES TO THE PULSE OF YOUR TUNES
Bleed
5.75 x 8.25
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment. This device complies with Part
15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.