ATrack Technology ATVT1303 CDMA GPS VEHICLE TRACKER User Manual

ATrack Technology Inc. CDMA GPS VEHICLE TRACKER

User Manual

Download: ATrack Technology ATVT1303 CDMA GPS VEHICLE TRACKER User Manual
Mirror Download [FCC.gov]ATrack Technology ATVT1303 CDMA GPS VEHICLE TRACKER User Manual
Document ID2010408
Application IDyE3nlCfqyo6oMRabMYPXqA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize34.41kB (430175 bits)
Date Submitted2013-07-08 00:00:00
Date Available2014-01-04 00:00:00
Creation Date2017-10-26 18:18:03
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 18:18:03
Document TitleUser Manual
Document CreatorPScript5.dll Version 5.2.2

AU7
User Manual
Revision: 10
Revision Date: 2012/06/25
ATrack Technology Inc.
Tel: +886-2-27975852
3F., No. 88, Sec. 1, Neihu Rd., Neihu Dist.,
Fax: +886-2-27974030
Taipei City 11493, Taiwan (R.O.C.)
http://www.atrack.com.tw
Confidential Document
Contents
1.
Notification .............................................................................................................................. 3
1.1. Disclaimer .................................................................................................................................... 3
1.2. Copyright ...................................................................................................................................... 3
1.3. Warning ........................................................................................................................................ 3
2.
Hardware ................................................................................................................................. 4
2.1. Package Content ......................................................................................................................... 4
2.2. Pin Assignments .......................................................................................................................... 5
2.2.1. Serial Cable (JST Female Connector to DB9 Female Connector).......................................... 5
2.2.2. Power/IO connector (Male; On Device) ................................................................................... 5
2.3. Installation .................................................................................................................................... 6
3.
Firmware Upgrade ................................................................................................................. 7
3.1. Firmware Upgrade by serial connection ...................................................................................... 7
3.2. LED Indications .......................................................................................................................... 13
4.
Appendix................................................................................................................................ 14
4.1. Hardware Specification .............................................................................................................. 14
4.2. FCC Regulations:....................................................................................................................... 15
© ATrack Technology Inc. All Rights Reserved.
Page 2 of 15
Confidential Document
1. Notification
1.1. Disclaimer
This document, and all other related products, such as device, firmware, and software, is developed by
ATrack Technology Inc. thoroughly. At the time of release, it is most compatible with specified firmware version.
Due to the functionalities of the devices are being developed and improved from time to time, the change in
the protocol, specification, and firmware functions are subjects to change without notice. ATrack Technology
Inc. is obligated to modify all the documentation without the limitation of time frame. A change notice shall be
released to ATrack Technology Inc. customers upon the completion of document modification.
ATrack Technology Inc. products are not intended to be used as life support or rescue equipments. ATrack
Technology Inc. is not liable for any loss or injury caused by using or referencing to any products. Any possible
means of using or integrating ATrack Technology Inc. products shall be avoided.
1.2. Copyright
ATrack Technology Inc. holds all parts of intellectual rights applicable in the copyright laws in all the countries.
Any or all parts of this document shall not be exposed to non-authorized party without any form of approval
from ATrack Technology Inc. Any forms, including but not limited to oral, copy, or internet sharing, of releasing
or exposing information to an unauthorized party shall be prohibited. ATrack Technology Inc. reserves the
rights of litigation in the violation of such copyright laws.
1.3. Warning
Connecting the wire inputs can be hazardous to both the installer and your vehicle’s electrical system if not
done by an experienced installer. This document assumes you are aware of the inherent dangers of working
in and around a vehicle and have a working understanding of electricity.
© ATrack Technology Inc. All Rights Reserved.
Page 3 of 15
Confidential Document
2. Hardware
2.1. Package Content
Each package contains the following device/accessories:
 Device * 1
 CDMA Antenna * 1
 GPS Antenna * 1
 Power/IO Cable * 1
 Serial Cable * 1
© ATrack Technology Inc. All Rights Reserved.
Page 4 of 15
Confidential Document
2.2. Pin Assignments
2.2.1. Serial Cable (JST Female Connector to DB9 Female Connector)
The Pin 9 is a power output port to provide a 5V, 300mA power source for accessory that
connects to the serial port. If the connected accessory requires more power, please use external
power source instead.
2.2.2. Power/IO connector (Male; On Device)
Positive Inputs: IN0, IN1 (Triggered when connects to V+ range from 3.7 ~ 40V)
Negative Inputs: IN2, IN3 (Triggered when connects to ground range from 0.8 ~ 0V)
Analog Input: 0 ~ 40 V; 10-bit Resolution.
All outputs are open collector type (grounded when enabled).
DO NOT CONNECT ANY POWER SOURCE TO 1-WIRE IO AND 1-WIRE GND TO AVOID DAMAGE.
© ATrack Technology Inc. All Rights Reserved.
Page 5 of 15
Confidential Document
2.3. Installation
When installing the device onto the vehicle, it is necessary to make sure that the direction of the device is
following the picture demonstrated in the below picture, in order to have the G-Sensor working properly for
harsh driving event detections. The forces on the axes are used to determine the harsh driving event status,
hence if the installation is not able to be like in the picture, it is suggested to use GPS for detection instead.
Y-Axis
X-Axis
Z-Axis
Note: when installing the device, the vehicle should be parked on a horizontal place (not tilted). The
device then should be installed parallel to the vehicle body and fixed with mounting bracket or double
side adhesive as shown to ensure the G-Sensor is functioning properly.
© ATrack Technology Inc. All Rights Reserved.
Page 6 of 15
Confidential Document
3. Firmware Upgrade
3.1. Firmware Upgrade by serial connection
(1) Run HyperTerminal program
© ATrack Technology Inc. All Rights Reserved.
Page 7 of 15
Confidential Document
(2) Enter a name for the connection
(3) Choose COM port and click [Configure…] button.
© ATrack Technology Inc. All Rights Reserved.
Page 8 of 15
Confidential Document
(4) Choose 57600,8,N,1 None flow control properties and click [OK] button.
(5) Click [File][Properties]
© ATrack Technology Inc. All Rights Reserved.
Page 9 of 15
Confidential Document
(6) Click [Settings] tab and [ASCII Setup…] button
(7) Checked the following option and click [OK] button
© ATrack Technology Inc. All Rights Reserved.
Page 10 of 15
Confidential Document
(8) Power ON the device. The startup message will show on the screen.
(9) Type “AT$FWDL” command and press [Enter] key. Choose [Transfer][Send File…]
© ATrack Technology Inc. All Rights Reserved.
Page 11 of 15
Confidential Document
(10) Choose the firmware filename which is provided by ATrack and select [Ymodem] Protocol option and
click [Send] button.
(11) When [Send] button is clicked, the file transfer progress will show as below:
© ATrack Technology Inc. All Rights Reserved.
Page 12 of 15
Confidential Document
(12) When file sending is completed, the device will program and restart itself automatically.
3.2. LED Indications
LED
Indication
Description
Solid On
In full operation mode
1 blink (0.1 sec.) in every 10 sec.
In sleep mode
PWR (Green)
GPS module off, External power lost, running on
1 sec. On, 1 sec. Off
backup battery
0.7 sec. On, 0.7 sec. Off
Searching GPS signal
Solid On
Position get fixed
Off
CDMA module off
0.7 sec. On, 0.7 sec. Off
Searching CDMA signal
0.2 sec. On, 2 sec. Off
Registered to CDMA network
Continuous blinking
SIM PIN Error
GPS (Red)
CDMA (Red)
Note: In the case of SIM PIN Error, the device will check the AT$SPIN every 10 minutes and try to access the SIM again.
If the PIN is not corrected within 3 times of checking, including the first inserting time, the SIM card will be locked. Once
the SIM is locked, you need to contact your CDMA carrier for the PUK to unlock the SIM card on a cellular phone.
© ATrack Technology Inc. All Rights Reserved.
Page 13 of 15
Confidential Document
4. Appendix
4.1. Hardware Specification
AU7
Physical Characteristics
Dimension
100 * 65 * 26 mm
CDMA Module
Bual band CDMA 850/1900MHz
GPS Module
High Sensitivity (44 Channel)
CDMA and GPS Antennas
SMA Connector Type
Accelerometer
Built-In 3-Axis @ 16GMAX
Audio Amplifier
Built-In
Real-Time Clock
Built-In
Memory Capacity
8MB
Casing
Aluminum alloy
Electrical Characteristics
Power Source
8-40 VDC
Power Consumption
Operational
80 mA @ 12VDC
Sleep
18 mA @ 12VDC
Deep Sleep
4 mA @ 12VDC
I/O Characteristics
Device I/O Ports
Positive Inputs
2 (Triggering voltage: 3.7 ~ 40V)
Negative Inputs
2 (Triggering voltage: 0 ~ 0.8V)
Analog Input
Negative Outputs
Serial
Configurable
Baud rates
1 (0 ~ 40V with 10-bit resolution)
3 (Open Collector Type @ 300mAMAX)
1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200 bps
1-Wire (AU7 ONLY)
Environmental Characteristics
Operation
Temperature
-30 ~ +65°C (Note: Temp. up to +85°C with
extreme condition)
Storage
Temperature
Relative Humidity
© ATrack Technology Inc. All Rights Reserved.
-40 ~ +85°C
5 ~ 95%
Page 14 of 15
Confidential Document
4.2. FCC Regulations:
 This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
 This device has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiated radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the
user‘s authority to operate the equipment.
RF Exposure Information
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal Communications Commission of the U.S. Government.
 This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. In
order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to
the antenna shall not be less than 20cm (8 inches) during normal operation.
© ATrack Technology Inc. All Rights Reserved.
Page 15 of 15

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : 
Create Date                     : 2013:05:31 17:47:37+08:00
Modify Date                     : 2013:07:04 20:43:04+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:07:04 20:43:04+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:90a10685-4eed-46ab-a93c-0388839a0b55
Instance ID                     : uuid:352b5850-bc57-4bae-be5d-f44d67a871f5
Page Count                      : 15
EXIF Metadata provided by EXIF.tools
FCC ID Filing: YA7-ATVT1303

Navigation menu