AUTOEQUIPS TECH CM11W Digital Wireless System User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2929072
Application ID	MuCY1Q5gJb9GIJqqFozcIQ==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	61.16kB (764495 bits)
Date Submitted	2016-03-14 00:00:00
Date Available	2016-03-14 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat Distiller 9.3.2 (Windows)
Document Lastmod	0000-00-00 00:00:00
Document Title	Users Manual
Document Creator	CorelDRAW
Document Author:	Administrator

1.Attach the supplied bracket on the glass or flat area and make sure it
fix firmly.
7” TFT WIRELESS
MONITOR WITH 4CH
USER MANUAL
DISPLAY MODE SETTING
Press “ SELECT” to enter the sub-menu.
First,find a best position and angle
Second,pull the pressure valve down
2.Mount monitor and tighten the knob,adjust the angle of the monitor.
CAM2
1 2
1 3
1 4
SPLIT 1-2
SPLIT 1-3
SPLIT 1-4
2 3
2 4
3 4
SPLIT 2-3
SPLIT 2-4
SPLIT 3-4
H-SPLIT
OFF
Press “+”, “-” to move
the cursor.
Press “SELECT” to
confirm it.
Press“ MENU” to exit.
SELECT
QUAD
. The 4TX VS 1RX digital wireless system is specially designed for
truck,trailer and farm cultivator.
With significant long-distance and stable transmission capacity,
the transmission range can be as far as 150M.
Applicable for DC 12V/24V vehicle.
With re-pairing function.
With record function.
Line1, line 2 is split mode, line 3 is quad mode, OFF is cancel split and
quad mode.
SWITCHING CHANNEL AND ITS TIME SETTING
(CM11W*4)
Press “+” to “AUTOSCAN” option,then press
“SELECT” to enter the sub-menu.
CT
SELE
SELECT
SELECT
OPTION 2
: (power indicator): power on, indicator turns red.
2 REC : start up/stop recording.
3 + : select the item and increase the value of this item.
4 - : select the item and decrease the value of this item.
5 SELECT : confirm the desired item and in work mode, press“SELECT” to switch
display mode as the following order:
AUTOSCAN-CAM1-CAM2-CAM3-CAM4-QUAD MODE-AUTOSCAN
6 MENU : menu is activated and exit the OSD menu.
7 POWER : power on/off.
: (Photosensitive resistance) enter day/night mode automatically. Power
on/off the system.
(CM111)
Ground wire(Black)
Power inpout lead
(Red)(DC IN)
OPTION 1
( CB213+CAM)*4
Power input lead (Red)
Ground wire (Black)
ACC for record (Yellow)
Trigger for cam1 (Green)
Trigger for cam2 (Blue)
Trigger for cam3 (Brown)
Trigger for cam4 (Gray)
CAM2
OPERATION
Press “+ ”, “-” to choose which channel do you want to display,press
“SELECT”to confirm it, then press “+”, “-” to select “ON/OFF”,at last
press “SELECT”.
Press “MENU” to enter main menu
Remark: The switch channel is effected by the setting display mode,
CAM2
eg: When you choose “ SPLIT 3-4 ”, the default setting is
“CAM3 ON”, “CAM4 ON”,“CAM1 OFF”, “CAM2 OFF”.
MONITOR INSTALLATION
. Install the monitor on the windshield of the vehicle.
. Don't install the unit in an extremely hot or humid place (radiator,air
PAIRING SETTING
duct, ect.) or in a place subject to direct sunlight, excessive dust,
mechanical vibration or shock.
Press “SELECT” to choose the channel which do you want to pairing,
then press “MENU” to enter the main menu.
. The monitor is not designed for waterproof.
RECORD SETTING
: adjust the brightness of view.
Press“+”to“PAIRING”option,then press“SELECT”to enter into pairing
mode, countdown to pair with 50 seconds, power on a transmitter, at
last ,the system do the pairing automatically.When paired for the first
time, it will not longer be interference.
Press “+” to “RECORD” option,then press
“SELECT” to enter the sub-menu.
: adjust the contrast of view.
Press “ SELECT ” to confirm it, then the
storage is nearly full,the oldest recording
file will be overlapped.
CAM2
MIRROR /NORMAL SETTING
OFF
:adjust the hue of view.
OFF
Press “+” to “MIR-FLIP” option,then press
“SELECT” to enter the sub-menu.
Press “SELECT” to confirm it, then all the
parameters return to the factory setting.
OFF
OFF
Choose which camera do you want to
record.
: adjust the volume of the loudspeaker.
Press “SELECT” to confirm the desired item.
CAM2
Press “+” or “-” to adjust the value.
SYSTEM'S PARAMTER SETTING
Press “+” to “SYSTEM” option,then press
“SELECT” to enter the sub-menu.
Press “+”, “-” to choose “NORMAL”, “MIRROR”, “FLIP” or “MIR-FLIP”,
then press “ SELECT ” to confirm it. After that the camera view will
change according the setting and exit the sub-menu.
CAM2
PICTURE'S PARAMETERS SETTING
2015/10/26
Press “+” to “PICTURE” option, then press
“SELECT” to enter the sub-menu.
Press “SELECT ” to
confirm the desired
item
PA L
Press“+”,“-”to adjust
the value of the item,
then press“SELECT”
to confirm it.
YES
Parking line
CAM2
PLAYBACK
The value
choose
from 0~9.
Press “+” to “PLAY” option,then press
“SELECT” to enter the sub-menu.
7 inch Digital TFT LCD monitor ..................................................16:9
Video input &Video output: ....................................................... 4CH
Wide view angle(CR>10):.............(up/ down): 50/70, (left/right):70/70
High brightness (cd/m2): ........................................................... 400
Contrast ratio:........................................................................... 500
Resolution :....................................................... 800*3（RGB）*480
Day/ night sensor for automatic adjustment
Build-in speaker
Frequency Range:.................................................. 2406 - 2476 MHz
Barrier-free Transmission Distance: ..................... ≤150M (free sight)
Memory mode:................................. high speed SD card Max.128GB
Start Up Time: ..................................................................... 1S Max
Latency: ........................................................................... < 120 ms
Video Code: ........................................................................ MPEG4
Audio Code: .............................................................WAV, 1 channel
Frame Rate:NTSC:................................................... 30f/s PAL:25f/s
Color system: ................................................................. PAL/NTSC
With soon respond (ms) (at 25℃) :................................................. 20
Power requirement: ...................................................... 12V/24V DC
Power consumption: ............................................................... ≤5W
Operating temperature:.............................................. -20℃ to +70℃
Dimension: ............................................... 192(L)*121(W)*28(D) mm
Weight:................................................................................... 476g
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : Administrator
Create Date                     : 0000:01:01 00:00:00
Modify Date                     : 0000:01:01 00:00:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : Administrator
Title                           : TM70W-4成套说明书1.0版20151104.cdr
Creation Date--Text             : 
Mod Date--Text                  : 
Producer                        : Acrobat Distiller 9.3.2 (Windows)
Creator Tool                    : CorelDRAW
Metadata Date                   : 2016:03:07 14:31:17+08:00
Document ID                     : uuid:c3fa83c2-7686-4504-905d-163f9c6f06c2
Instance ID                     : uuid:0896c134-a37c-4560-a72b-e903fec9b7e7
Page Count                      : 2

EXIF Metadata provided by EXIF.tools