AUTOLAND SCIENTECH ISCANII-BU Car Diagnostician User Manual
AUTOLAND SCIENTECH Co. LTD Car Diagnostician
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1053871 |
| Application ID | 3CO3VDT5snQJJoA9Kz+YrA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 94.01kB (1175065 bits) |
| Date Submitted | 2009-01-09 00:00:00 |
| Date Available | 2009-01-09 00:00:00 |
| Creation Date | 2008-12-09 14:39:46 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2008-12-09 14:39:46 |
| Document Title | untitled |
SCANNER FEATURES 1. FEATURES Display Screen Keypad for Directions Bluetooth Indication light Power supply indication light Status light indicator USB socket for for diagnostic circuits software update Keypad for numbers 25-Pin Connector For connection to the 25-Pin Diagnostic Cable 9-Pin Connector For connection to a PC or Thermal Printer Bluetooth Antenna Interface specified connector Ashtray lighter power / Screen Brightness Dial Battery power, DC: 9-16V 25-Pin Connector For connection with 25-Pin diagnostic adapter/cable. Interface Specified Connector The connector for the special interface cards. 9-Pin Connector Used for attaching optional devices such as a personal computer or the thermal printer. Display Screen Displays data and messages for the user. Keypad Used for entering commands and selecting data on the scanner screen. USB Socket Download the software from the Internet and program the internal memory. Users should download the drivers and PS-Module Manager to program the software. Install the driver before start PS-Module Manager. Contrast Dial Used to adjust the brightness for the screen. Bluetooth Indication Light The blue light will flash without PC connection. Always ON when connected with PC. Ashtray Lighter Power / Battery Power Some diagnostic connector does not have power supply or ground. For such models users have to plug the ashtray lighter power cable or battery power cable together with the diagnostic cable. 2. KEYPAD Left and Right arrow keys: Enables movement through diagnostic functions, vehicle models and systems from the current page to the NEXT or PREVIOUS page. Up and Down arrow keys: Used for selecting test functions, vehicle models and systems that are listed on the CURRENT page. Enter commands into the scanner. Interrupts the current procedure and returns to the previous menu or test mode selection. Digits 0 through 9. Selects the functions, vehicle models or systems by pressing the numbered keys. 0~9 3. INDICATOR LIGHTS Power Indicator (Red LED light) Data Link Indicator (Green LED light) Data Link Indicator (Orange LED light). Bluetooth Status Indicator (Blue LED light) If the diagnostic link circuit is shorted to ground or if the control unit is faulty, the green or orange LED light will turn on steadily when the scanner is connected to the vehicle’s diagnostic connector. 4. QUICK START (1) FIND THE DIAGNOSTIC CONNECTOR Most of the connectors are on the driver’s side below the dash board. Sometimes covered by a plastic plate. Please note that prior to the year 2000 most vehicles were equipped with manufacturer specific connector. Some manufacturers used different connectors to access different systems. Ex: Toyota. These connectors are located in the engine compartment. To retrieve manufacturer information, please connect to the appropriate port, failure to do so will result in a communication error. (2) SELECT THE INTERFACE MODULE There are some interface modules available. For example, OBDII-IM5. Insert the interface module into the base unit. WARNING! Wrong selection may be harmful for the vehicle or fail to communicate. (3) CONNECT TO THE VEHICLE Connect the iSCAN-II and the diagnostic connector in the vehicles. Find the models from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. 5. ICONS Along the top or bottom of the display, the following icons may appear which will provide more information to the user. DATA STREAM 3/8 Engine Speed Coolant Temperature Injection Time Ignition Angle Battery Voltage Electric Load Brake Signal 915 rpm 85 ºC 10 ms 5º 13.2 V ON OFF Connecting Failed Page Keys When either of these icons appears in the top line or bottom line on the screen, there is more information available. Press the (left), (right), (down), and (up) arrow key to view additional information. 0..9 Number Keys 1. Press the Number key from 1 to 9 to directly select the vehicle make or system items. 3/8 Page Information Displays current page number and total number of pages. Faulty Connection Indication Check and see if the Ignition key is on or if the engine is running. Check the power requirement for the scanner (10.5 to 14.5 Volts) Check and make sure that the connection to the vehicle’s diagnostic connector is secure. Check for a short circuit in the vehicle’s diagnostic connector. Check and make sure that the cartridge in use supports this vehicle’s system. Check to make sure that you have selected the correct cables. ACURA® HONDA® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for ACURA / HONDA diagnostic system. Prior to the year 1998, most vehicles were equipped with 3-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. The rest of sockets may be located under the glove compartment on passenger side or close to the side kicker on driver's. Please refer to the sticker direction under the dashboard on driver side and near the steering column. The socket may locate at the following position. The diagnostic socket is located under the dashboard on driver side, near the left side of the steering column. For example ACCORD (’98-03), CIVIC (’96-00), PASSPORT (96-99). The diagnostic socket is located in the central console. It is under the ashtray. (Remove the ashtray). For example, ACCORD (‘95-97). The vehicle’s diagnostic socket is located under the glove compartment. For example, S2000 (00-03), Pilot (‘03) The vehicle’s diagnostic socket is located on the right side of the central console, near the passenger’s glove compartment. For example, DEL SOL, CR-X (’96-97), ODYSSEY (’96-98), PRELUDE, CR-V (‘97-01), INSIGHT (’00-02). Note: To connect PRELUDE (’97-01), remove the trim panel. The diagnostic socket is located under the armrest. To connect, remove the beverage holder. For example, PRELUDE (‘96). The diagnostic socket is located under the dashboard on driver side , near the right side of the steering column. For example, CIVIC (’01-03), ODYSSEY (’99-03), CR-V (‘02-03) 3-PIN Socket For the older models which were not equipped with OBD-II socket, there is a 3-PIN socket available. Please refer to the sticker direction under the dashboard on driver side and near the steering column. The diagnostic socket is located under the glove compartment on passenger side. It is very close to side kicker. For example, CIVIC, CR-X (‘92-95), DEL SOL (‘93-95) The diagnostic socket is located in the central console. It is above the ashtray or coin tray. For example, PRELUDE (‘92-95). The diagnostic socket is located in the central console. It is under the ashtray or coin tray. For example, PASSPORT (‘94-95/5) The diagnostic socket is located under the glove compartment on passenger side. It is near the side kicker. For example, ACCORD (‘94-95 L4) The diagnostic socket is located under the glove compartment. For example, ODYSSEY (’95). iSCAN-II for ACURA / HONDA © 2008 Autoland Scientech. Page 1 ACURA / HONDA AUT LAND® S C I E N T E C H iSCAN-II Documentation There is only one interface module available for ACURA / HONDA diagnostic system, OBDIIIM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. 3. CONNECT TO THE VEHICLE Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the ACURA / HONDA from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 12 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 ISUZU iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for ACURA / HONDA © 2008 Autoland Scientech. Page 2 ACURA / HONDA 2. SELECT THE INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. HND-AC-3P HND-C-2P The adapter for the old models. The adapter to trigger the self-test light at the instrument cluster. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for ACURA / HONDA © 2008 Autoland Scientech. Page 3 ACURA / HONDA ADAPTERS AND INTERFACE MODULE ACURA and HONDA vehicles are equipped with the same diagnostic systems. Select ACURA or HONDA may have the same functions for the diagnostic system. Select ACURA or HONDA by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. ACURA ENGINE A/T ABS / VST SRS EPS 2-PIN CODE LOOKUP ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM CLEAR ADAPTATION ECU RESET The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for ACURA / HONDA. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for ACURA / HONDA © 2008 Autoland Scientech. Page 4 ACURA / HONDA START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for ACURA / HONDA © 2008 Autoland Scientech. Page 5 ACURA / HONDA TROUBLE SHOOTING BMW® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for BMW diagnostic system. From 1987 to 2000, the models were equipped with round type 20-Pin diagnostic socket. The models since 2001 have been equipped with OBD-II socket. OBD-II Socket For the newer models, ex. E65, E60, E90...etc, OBD-II diagnostic socket can be found under a plastic cover of dashboard on driver side. It is very close to side kicker and near the door. US models from 1995 to 2000 were equipped with both 20-Pin and OBD-II diagnostic sockets. Only 20-PIN diagnostic socket can work in the diagnostic communication. OBD-II diagnostic socket is for Generic OBD-II communication purpose only. OBD-II socket 20-PIN Socket The oldest models equipped with 20-PIN socket. The socket is covered by a plastic cover and under the engine hood, beside the absorber strut tower. 20-PIN socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for BMW diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for BMW © 2008 Autoland Scientech. Page 1 BMW Diag AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the BMW Diag from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4 FIAT iSCAN-II (V1.00) BMW GT2 1 BMW Diag iSCAN-II (V1.00) 2 BMW CODING iSCAN-II (V1.00) 3 BMW SSS iSCAN-II (V1.00) 4. MINI 5 JAGUAR iSCAN-II (V1.00) 6 LANDROVER iSCAN- II (V1.00) iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P BM-AC1-20P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models from 2001. Connect to the OBDII-IM5 with AC-EC1. The adapter for the old models up to 2000. Connect directly to iSCAN-II using BU-EC. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for BMW © 2008 Autoland Scientech. Page 2 BMW Diag 3. CONNECT TO THE VEHICLE Select BMW Diag by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. BMW Diag 1 series 3 series 5 series 6 series 7 series X series EWS / DME Sync CAS / DME Sync DME 7.2 ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION ADAPTATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for BMW. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for BMW © 2008 Autoland Scientech. Page 3 BMW Diag START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there is no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connects to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. After selecting the model, the green light is always ON before communication starts? If the diagnostic circuit is shorted to ground or if a faulty control unit is in the vehicle, the green or yellow LED light on the scanner will remain on steadily when the scanner is connected to the vehicle diagnostic connector. Try to remove the faulty ECU from the bus. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for BMW © 2008 Autoland Scientech. Page 4 BMW Diag TROUBLE SHOOTING CHRYSLER® DIAGNOSTIC SYSTEM GETTING STARTED iSCAN-II CHRYSLER Diagnostic Software cover the following brand: Chrysler, Dodge and Jeep. 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket !!!!!Most OBD-II diagnostic sockets are located under the steering wheel on driver or glove !!!!!compartment on passenger side. !!!!!OTHER Socket !!!!!iSCAN-II Chrysler Diagnostic Software does not support the vehicles which are equipped with !!!!!the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for CHRYSLER diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. ISCAN-II for CHRYSLER © 2008 Autoland Scientech. Page 1 CHRYSLER AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the CHRYSLER from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. ISCAN-II for CHRYSLER © 2008 Autoland Scientech. Page 2 CHRYSLER 3. CONNECT TO THE VEHICLE Select CHRYSLER by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. CHRYSLER ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for CHRYSLER. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. ISCAN-II for CHRYSLER © 2008 Autoland Scientech. Page 3 CHRYSLER START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. ISCAN-II for CHRYSLER © 2008 Autoland Scientech. Page 4 CHRYSLER TROUBLE SHOTTING CITROËN® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under a plastic cover of dashboard on driver side. Some of them can be found behind the ashtray box or the relay box. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for CITROËN diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for CITROËN © 2008 Autoland Scientech. Page 1 CITROËN AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the CITROEN from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP FRENCH PKG 1 1 RENAULT 2 iSCAN-II (V1.00) 2 CITROEN iSCAN-II (V1.00) 3 PEUGEOT iSCAN-II (V1.00) 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models The most common adapter for the equipped with only OBD-II socket. new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for CITROËN © 2008 Autoland Scientech. Page 2 CITROËN 3. CONNECT TO THE VEHICLE Select CITROËN by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. CITROEN BERLINGO C2 C3 C4 C5 C8 JUMPY XSARA ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for CITROËN. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for CITROËN © 2008 Autoland Scientech. Page 3 CITROËN START TO DIAGNOSE iSCAN-II never show anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connects to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for CITROËN © 2008 Autoland Scientech. Page 4 CITROËN TROUBLE SHOOTING DAEWOO® DIAGNOSTIC SYSTEM GETTING STARTED iSCAN-II Daewoo Diagnostic Software focus on Daewoo except GM Daewoo vehicles. GM Daewoo, please select iSCAN-II GM Diagnostic Software for North America area. 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for DAEWOO diagnostic system. Prior to the year 1998, most vehicles were equipped with 12-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. OBD-II socket 12-PIN Socket For the old models equipped with 12-PIN socket, please refer to the sticker direction under the dashboard on driver side and near the steering column. Some models equip both of the sockets, only 12-PIN socket can be worked. 2. SELECT THE INTERFACE MODULE There is only one interface module available for DAEWOO diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for DAEWOO © 2008 Autoland Scientech. Page 1 DAEWOO AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the DAEWOO from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAEWOO 2 iSCAN-II (V1.00) 2 HYUNDAI iSCAN-II (V1.00) 3 KIA iSCAN-II (V1.00) 4 SSANGYONG iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P GM-AC-12P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. The adapter for the old models. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for DAEWOO © 2008 Autoland Scientech. Page 2 DAEWOO 3. CONNECT TO THE VEHICLE Select DAEWOO by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. DAEWOO ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for DAEWOO. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for DAEWOO © 2008 Autoland Scientech. Page 3 DAEWOO START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 1. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for DAEWOO © 2008 Autoland Scientech. Page 4 DAEWOO TROUBLE SHOOTING DAIHATSU® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket The OBD-II diagnostic socket is located under the steering wheel on driver side. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for DAIHATSU diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for DAIHATSU © 2008 Autoland Scientech. Page 1 DAIHATSU AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the DAIHATSU from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 ISUZU iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for DAIHATSU © 2008 Autoland Scientech. Page 2 DAIHATSU 3. CONNECT TO THE VEHICLE Select DAIHATSU by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. DAIHATSU ENGINE A/T ABS SRS EPS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for DAIHATSU. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for DAIHATSU © 2008 Autoland Scientech. Page 3 DAIHATSU START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for DAIHATSU © 2008 Autoland Scientech. Page 4 DAIHATSU TROUBLE SHOOTING FIAT® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II FIAT Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for FIAT diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for FIAT © 2008 Autoland Scientech. Page 1 FIAT AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the FIAT from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for FIAT © 2008 Autoland Scientech. Page 2 FIAT 3. CONNECT TO THE VEHICLE Select FIAT by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. FIAT ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for FIAT. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for FIAT © 2008 Autoland Scientech. Page 3 FIAT START TO DIAGNOSE TROUBLE SHOOTING 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The 2. software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software do not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connects to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for FIAT © 2008 Autoland Scientech. Page 4 FIAT iSCAN-II never shows anything on LCD screen and there’s no back-light? !FORD® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. OBD-II socket OTHER Socket If another connector is found, ex. 17+8 / 6+1 / 20-PIN socket, please select iSCAN-II MAZDA Diagnostic Software. 2. SELECT THE INTERFACE MODULE There is only one interface module available for FORD diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. ISCAN-II for FORD © 2008 Autoland Scientech. Page 1 FORD AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the FORD from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. ISCAN-II for FORD © 2008 Autoland Scientech. Page 2 FORD 3. CONNECT TO THE VEHICLE Select FORD by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. FORD ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for FORD. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. ISCAN-II for FORD © 2008 Autoland Scientech. Page 3 FORD START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connects to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. ISCAN-II for FORD © 2008 Autoland Scientech. Page 4 FORD TROUBLE SHOOTING GM® DIAGNOSTIC SYSTEM GETTING STARTED The iSCAN-II GM Diagnostic Software cover the following brand: Buick, Cadillac, Chevrolet, GM Daewoo, GMC, Hummer, Oldsmobile, Pontiac and Saturn. For old Daewoo, please select iSCAN-II DAEWOO Diagnostic Software. For Opel / Vauxhall, please select iSCAN-II OPEL Diagnostic Software. For Saab, please select iSCAN-II SAAB Diagnostic Software. For Holden, please select iSCAN-II HOLDEN Diagnostic Software. 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side or under the glove compartment on passenger's. OTHER Socket iSCAN-II GM Diagnostic Software does not support the 10-Pin and 12-Pin socket models for old GM vehicles. 2. SELECT THE INTERFACE MODULE There is only one interface module available for GM diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. ISCAN-II for GM © 2008 Autoland Scientech. Page 1 GM AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the GM from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. ISCAN-II for GM © 2008 Autoland Scientech. Page 2 GM 3. CONNECT TO THE VEHICLE GM START TO DIAGNOSE Select GM by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. GM ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for GM. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. ISCAN-II for GM © 2008 Autoland Scientech. Page 3 GM TROUBLE SHOTTING iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything in LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then shows 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. ISCAN-II for GM © 2008 Autoland Scientech. Page 4 AUT LAND® S C I E N T E C H HYUNDAI® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for HYUNDAI diagnostic system. Prior to the year 2000, most vehicles were equipped with 12-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. For new models after 2006, the communication protocol of ECUs is CAN. Please use OBDII-IM5 first on new models, then try ASIAN-IM1 if the communication with some systems are failed. OBD-II socket 12-PIN Socket For the old models equipped with 12-PIN round socket, located in the fuse box under the steering wheel on driver side. Some models may be equipped with OBD-II and 12-PIN connectors together. Try both connectors by using ASIAN-IM1. 2. SELECT THE INTERFACE MODULE There are two interface modules available for HYUNDAI diagnostic system, OBDII-IM5 and ASIAN-IM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for HYUNDAI © 2008 Autoland Scientech. Page 1 HYUNDAI iSCAN-II Documentation Plug the diagnostic adapter into the diagnostic socket in the vehicle. Select the HYUNDAI from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. If the model equipped with 12PIN diagnostic socket, plug the ashtray lighter power cable, BU-EC-1. 12-PIN diagnostic connector should connect to ASIAN-IM1, MIT port. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAEWOO 2 iSCAN-II (V1.00) 2 HYUNDAI iSCAN-II (V1.00) 3 KIA iSCAN-II (V1.00) 4 SSANGYONG iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for HYUNDAI © 2008 Autoland Scientech. Page 2 HYUNDAI 3. CONNECT TO THE VEHICLE There are two interface modules available for the diagnostic system, OBDII-IM5 and ASIAN-IM1. OBDII-IM5 ASIAN-IM1 OBD-II Full Specification Multiplexer ASIAN Interface Module for TOYOTA / NISSAN / MITSUBISHI / HYUNDAI / KIA OBDII-AC-16P MIT-AC-12P BU-EC-1 The most common adapter for the new models. Connect to the OBDII-IM5 or ASIAN-IM1 with AC-EC1. The adapter for the old models. Ashtray lighter power cable, the Connect to the ASIAN-IM1 with power source for 12-PIN AC-EC1. diagnostic socket models. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for HYUNDAI © 2008 Autoland Scientech. Page 3 HYUNDAI ADAPTERS AND INTERFACE MODULE Select HYUNDAI by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. HYUNDAI ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for HYUNDAI. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for HYUNDAI © 2008 Autoland Scientech. Page 4 HYUNDAI START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. For models manufactured at 2006, which interface module should I insert? Try OBDII-IM5 first, then ASIAN-IM1. OBDII-IM5 is applicable to CAN-protocol, and ASIANIM1 is to HYUNDAI specific protocol. To connect with CAN-protocol models, ASIAN-IM1 may send traditional signals to interrupt the inter-connection of the CAN-bus and cause fault codes. Please use OBDII-IM5 with iSCAN-II HYUNDAI diagnostic software to clear the fault codes. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for HYUNDAI © 2008 Autoland Scientech. Page 5 HYUNDAI TROUBLE SHOOTING AUT LAND® S C I E N T E C H INFINITI® NISSAN® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for INFINITI / NISSAN diagnostic system. Please note that prior to the year 1998, most vehicles are equipped with 14-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. For new models after 2006, the communication protocol of ECUs is CAN. Please use OBDII-IM5 first on new models, then try ASIAN-IM1 if the communication with some systems are failed. 14-PIN Socket For the old models equipped with 14-PIN round socket, located in the fuse box under the steering wheel on driver side. Some models might be equipped with OBD-II and 14-PIN connectors together, only 14-PIN diagnostic socket can be worked. 2. SELECT THE INTERFACE MODULE There are two interface modules available for INFINITI / NISSAN diagnostic system, OBDII-IM5 and ASIAN-IM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for INFINITI / NISSAN © 2008 Autoland Scientech. Page 1 INFINITI / NISSAN iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the INFINITI or NISSAN from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 3 HONDA iSCAN-II (V1.00) 4 NISSAN iSCAN-II (V1.00) 5 INFINITI iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for INFINITI / NISSAN © 2008 Autoland Scientech. Page 2 INFINITI / NISSAN 3. CONNECT TO THE VEHICLE There are two interface modules available for the diagnostic system, OBDII-IM5 and ASIAN-IM1. OBDII-IM5 ASIAN-IM1 OBD-II Full Specification Multiplexer ASIAN Interface Module for TOYOTA / NISSAN / MITSUBISHI / HYUNDAI / KIA OBDII-AC-16P NSN-AC-14P The most common adapter for the new models. Connect to the OBDII-IM5 or ASIAN-IM1 with AC-EC1. The adapter for the old models. Connect to the ASIAN-IM1 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for INFINITI / NISSAN © 2008 Autoland Scientech. Page 3 INFINITI / NISSAN ADAPTERS AND INTERFACE MODULE Select NISSAN or INFINITI by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. INFINITI ENGINE A/T ABS / VST SRS EPS 2-PIN CODE LOOKUP ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM CLEAR ADAPTATION ECU RESET The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for INFINITI / NISSAN. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for INFINITI / NISSAN © 2008 Autoland Scientech. Page 4 INFINITI / NISSAN START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. For models manufactured at 2006, which interface module should I insert? Try OBDII-IM5 first, then ASIAN-IM1. OBDII-IM5 is applicable to CAN-protocol, and ASIANIM1 is to INFINITI / NISSAN specific protocol. To connect with CAN-protocol models, ASIANIM1 may send traditional signals to interrupt the inter-connection of the CAN-bus and cause fault codes. Please use OBDII-IM5 with iSCAN-II INFINITI / NISSAN diagnostic software to clear the fault codes. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for INFINITI / NISSAN © 2008 Autoland Scientech. Page 5 INFINITI / NISSAN TROUBLE SHOOTING ISUZU® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket The OBD-II diagnostic socket is located under the steering wheel on driver side. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for ISUZU diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for ISUZU © 2008 Autoland Scientech. Page 1 ISUZU AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the ISUZU from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 ISUZU iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for ISUZU © 2008 Autoland Scientech. Page 2 ISUZU 3. CONNECT TO THE VEHICLE Select ISUZU by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. ISUZU ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for ISUZU. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for ISUZU © 2008 Autoland Scientech. Page 3 ISUZU START TO DIAGNOSE iSCAN-II never show anything in LCD screen and no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for ISUZU © 2008 Autoland Scientech. Page 4 ISUZU TROUBLE SHOOTING JAGUAR® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II JAGUAR Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for JAGUAR diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for JAGUAR © 2008 Autoland Scientech. Page 1 JAGUAR AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the JAGUAR from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for JAGUAR © 2008 Autoland Scientech. Page 2 JAGUAR 3. CONNECT TO THE VEHICLE Select JAGUAR by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. JAGUAR ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for JAGUAR. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for JAGUAR © 2008 Autoland Scientech. Page 3 JAGUAR START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software do not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but show 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for JAGUAR © 2008 Autoland Scientech. Page 4 JAGUAR TROUBLE SHOOTING KIA® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for KIA diagnostic system. Please note that prior to the year 1998, most vehicles were equipped with 20-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. 20-PIN Socket For the old models equipped with 20-PIN socket, located in the engine compartment, beside the driver side absorber strut tower or relay / fuse box. 2. SELECT THE INTERFACE MODULE There are two interface modules available for KIA diagnostic system, OBDII-IM5 and ASIANIM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for KIA © 2008 Autoland Scientech. Page 1 KIA AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the KIA from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAEWOO 2 iSCAN-II (V1.00) 2 HYUNDAI iSCAN-II (V1.00) 3 KIA iSCAN-II (V1.00) 4 SSANGYONG iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for KIA © 2008 Autoland Scientech. Page 2 KIA 3. CONNECT TO THE VEHICLE There are two interface modules available for the diagnostic system, OBDII-IM5 and ASIAN-IM1. OBDII-IM5 ASIAN-IM1 OBDII-IM5 is for CAN-BUS protocol only. Select ASIAN-IM1 with MIT port first. OBDII-AC-16P KIA-AC-20P The most common adapter for the new models. Connect to the OBDII-IM5 or ASIAN-IM1 with AC-EC1. The adapter for the old models. Connect to ASIAN-IM1 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for KIA © 2008 Autoland Scientech. Page 3 KIA ADAPTERS AND INTERFACE MODULE Select KIA by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. KIA ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for KIA. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for KIA © 2008 Autoland Scientech. Page 4 KIA START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. For models manufactured at 2006, which interface module should I insert? Try OBDII-IM5 first, then ASIAN-IM1. OBDII-IM5 is applicable to CAN-protocol, and ASIANIM1 is to KIA specific protocol. To connect with CAN-protocol models, ASIAN-IM1 may send traditional signals to interrupt the inter-connection of the CAN-bus and cause fault codes. Please use iSCAN-II KIA diagnostic software to clear the fault code. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for KIA © 2008 Autoland Scientech. Page 5 KIA TROUBLE SHOOTING LANDROVER® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II LANDROVER Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for LANDROVER diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBDII, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for LANDROVER © 2008 Autoland Scientech. Page 1 LANDROVER AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the LANDROVER from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for LANDROVER © 2008 Autoland Scientech. Page 2 LANDROVER 3. CONNECT TO THE VEHICLE Select LANDROVER by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. LANDROVER ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for LANDROVER. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for LANDROVER © 2008 Autoland Scientech. Page 3 LANDROVER START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connects to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connect to the system but show 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for LANDROVER © 2008 Autoland Scientech. Page 4 LANDROVER TROUBLE SHOOTING LEXUS® TOYOTA® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are three kinds of diagnostic sockets for LEXUS / TOYOTA. Please note that prior to the year 1998, most vehicles are equipped with 17-Pin round socket or 23-Pin square socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. The connector of some models can be found behind the coin box / ashtray box. For new models after 2006, the communication protocol of ECUs is CAN. Please use OBDII-IM5 first on new models, then try ASIAN-IM1 if the communication with some systems are failed. 17-PIN Round Socket For the older models equipped with 17-PIN round socket, located under the steering wheel on driver side. Some models might be equipped with OBD-II and 17-PIN connectors together. Try both connectors for each system. For these models, only ASIAN-IM1 interface module is available. 23-PIN Square Socket For the old models which equipped with 23-PIN square socket, located in the engine compartment, beside driver side or passenger side absorber strut tower. Some models might be equipped with OBD-II, 17-PIN, 23-PIN connectors together. Try all connectors for each system. For those models, only ASIAN-IM1 interface module is available. 2. SELECT THE INTERFACE MODULE There are two interface modules available for LEXUS / TOYOTA diagnostic system, OBDII-IM5 and ASIAN-IM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for LEXUS / TOYOTA © 2008 Autoland Scientech. Page 1 LEXUS / TOYOTA AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diangostic socket in the vehicles. Select the LEXUS or TOYOTA from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) iSCAN-II (V1.00) 4 TOYOTA iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 LEXUS iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for LEXUS / TOYOTA © 2008 Autoland Scientech. Page 2 LEXUS / TOYOTA 3. CONNECT TO THE VEHICLE There are two interface modules available for the diagnostic system, OBDII-IM5 and ASIAN-IM1. OBDII-IM5 ASIAN-IM1 OBD-II Full Specification Multiplexer ASIAN Interface Module for TOYOTA / NISSAN / MITSUBISHI / HYUNDAI / KIA OBDII-AC-16P TYT-AC-17P TYT-AC-23P The most common adapter for the new models. Connect to the OBDII-IM5 or ASIAN-IM1 with AC-EC1. The adapter for the old models. The adapter for the oldest Connect to the ASIAN-IM1 with models. Connect to the ASIANIM1 with AC-EC1. AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for LEXUS / TOYOTA © 2008 Autoland Scientech. Page 3 LEXUS / TOYOTA ADAPTERS AND INTERFACE MODULE Select TOYOTA / LEXUS by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. LEXUS ENGINE A/T ABS / VST SRS EPS 2-PIN CODE LOOKUP ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM CLEAR ADAPTATION ECU RESET The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for TOYOTA / LEXUS. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for LEXUS / TOYOTA © 2008 Autoland Scientech. Page 4 LEXUS / TOYOTA START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. For models manufactured at 2006, which interface module should I insert? Try OBDII-IM5 first, then ASIAN-IM1. OBDII-IM5 is applicable to CAN-protocol, and ASIANIM1 is to LEXUS / TOYOTA specific protocol. To connect with CAN-protocol models, ASIAN-IM1 may send traditional signals to interrupt the inter-connection of the CAN-bus and cause fault codes. Please use OBDII-IM5 with iSCAN-II LEXUS / TOYOTA diagnostic software to clear the fault codes. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for LEXUS / TOYOTA © 2008 Autoland Scientech. Page 5 LEXUS / TOYOTA TROUBLE SHOOTING MAZDA® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET Mazda is a partial subsidiary of Ford Motor Company. The Mazda software only covers on old cars with old sockets, ex. 17+8 pin, 6+1 pin and 20-pin. For new Mazda, please select iSCAN-II FORD Diagnostic Software. OBD-II Socket IF YOU FIND OBDII SOCKET, PLEASE SELECT iSCAN-II FORD DIAGNOSTIC SOFTWARE. Most OBD-II diagnostic sockets are located under the steering wheel on driver side. The connector can be found behind the coin box / ashtray box for some models.. 17+8 PIN Round Socket For the old models which were not equipped with OBD-II socket, there is a 17+8 PIN round socket available. Most the 17-PIN round sockets are located under the steering wheel on driver side. The diagnostic socket in some models are located in the engine compartment, beside the driver side or passenger side absorber strut tower. Some models will equip with OBD-II and 17PIN connectors together, but only 17+8 PIN socket can be worked. For these models, only ASIAN-IM1 interface module is available. 6+1 PIN / 20-PIN Socket The diagnostic socket is located in the engine compartment, beside the driver side or passenger side absorber strut tower. Connect the diagnostic socket to the base unit with BU-EC cable. The pin location will be shown on the screen of iSCAN-II. 2. SELECT THE INTERFACE MODULE There is only one interface module available for Mazda diagnostic system, ASIAN-IM1. Insert the interface module into the base unit firmly IF THERE IS A 17+8 PIN SOCKET IS FOUND, connect to TYT-connector. For 6+1 pin and 20-pin socket, connect directly with BU-EC cable. iSCAN-II for MAZDA © 2008 Autoland Scientech. Page 1 MAZDA AUT LAND® S C I E N T E C H iSCAN-II Documentation 3. CONNECT TO THE VEHICLE MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, ASIAN-IM1. ASIAN-IM1 MAZ-AC-17P D51-C1-2P-MAZ For 17+8 PIN socket For 17+8 connector. BE CAREFUL!! TYT-AC-17P is almost the same as MAZ-AC17P and it will NOT work for Mazda vehicle. The adapter for the old models equipped with 6+1/20 pin socket. Connect directly to the base unit with BC-EC. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for MAZDA © 2008 Autoland Scientech. Page 2 MAZDA Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the MAZDA from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. Select MAZDA by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. MAZDA ENGINE A/T ABS / VST SRS EPS 2-PIN CODE LOOKUP ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for MAZDA. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for MAZDA © 2008 Autoland Scientech. Page 3 MAZDA START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for MAZDA © 2008 Autoland Scientech. Page 4 MAZDA TROUBLE SHOOTING MERCEDES BENZ® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side and are covered by a plastic cover. US models from 1995 to 2000 were equipped with both 38-Pin and OBD-II diagnostic sockets. Only 38-PIN diagnostic socket can work in the diagnostic communication. OBD-II diagnostic socket is for Generic OBD-II communication purpose only. OBD-II socket 38-PIN Socket For the old models from 1990 to 2001 equipped with 38-PIN socket. The socket is covered by a plastic cover, close to the firewall of engine compartment or near the either side of engine compartment. The diagnostic socket for the van may be found under the driver's seat. 38-PIN socket 16-PIN / 8-PIN Socket For the oldest models, like 107/124/126 and etc., equipped with 16-PIN or 8-PIN socket, the socket is near the firewall of engine compartment. 16-PIN pole socket iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. 8-PIN pole socket Page 1 MERCEDES BENZ AUT LAND® S C I E N T E C H iSCAN-II Documentation 9-Pole socket Access trouble codes: Ensure ignition switched OFF. Connect Multimeter between data link connector (DLC) Pole 3 and earth. Switch ignition ON. Check that Multimeter indicates 70%. This indicates that the system has a fault memory. Start engine. Allow to idle. If readout fluctuates: No trouble codes have been recorded. If readout does not fluctuate: Note trouble codes. Compare with trouble table. Switch ignition OFF. Trouble code identification: (Ex. Model W126, 1985-1991, Engine: at idle) Percentage code: engine idling Fault location 0% Data link connector (DLC) - wiring 0% Weak mixture – with catalyst 10% Closed throttle position (CTP) switch/volume air flow (VAF) sensor 20% Wide open throttle (WOT) switch 30% Engine coolant temperature (ECT) sensor 40% Volume air flow (VAF) sensor 50% Oxygen sensor (O2S) – with cat 50% No fault – without catalyst 60% Vehicle speed sensor (VSS), during dynamic testing only 70% Engine speed (RPM) sensor 80% Intake air temperature (IAT) sensor (9/89-)/barometric pressure (BARO) sensor 90% Differential pressure regulator 95% Overrun cut-off active 100% Rich mixture/O2S – with cat 100% Engine control module (ECM) – supply voltage iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. Page 2 MERCEDES BENZ 9-Pole Diagnostic Socket The old models were equipped with 9-Pole diagnostic socket. Using On-Off Ratio Meter or Multimeter with duty cycle scale to read out the On-Off Ratio fault codes from Pole 3 of the diagnostic socket. There are only two interface modules available for MERCEDES BENZ diagnostic system, OBDII-IM5 and MB38-IM2. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. 3. CONNECT TO THE VEHICLE Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the MB from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. Page 3 MERCEDES BENZ 2. SELECT THE INTERFACE MODULE There are two interface modules available for the diagnostic system, OBDII-IM5 and MB38-IM2. Select the interface module corresponds to the socket found in the vehicle. OBDII-IM5 MB38-IM2 OBD-II Full Specification Multiplexer. Mercedes-Benz 38-Pin Electronic Multiplexer for old models from Year 1990 to 2001. OBDII-AC-16P MB-C-38P D51-C-MBLV The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. The adapter for the old models. The adapter for the oldest models. Connect directly to the iSCAN-II base unit. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. Page 4 MERCEDES BENZ ADAPTERS AND INTERFACE MODULE Select MB by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. MB S-Class E-Class C-Class ML-Class SL-Class A-Class HFM ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION WAVEFORM CODING ADAPTATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for Mercedes-Benz. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. Page 5 MERCEDES BENZ START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for Mercedes Benz © 2008 Autoland Scientech. Page 6 MERCEDES BENZ TROUBLE SHOTTING MINI® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBDII diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II MINI Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for MINI diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for MINI © 2008 Autoland Scientech. Page 1 MINI AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic socket into the diagnostic socket in the vehicles. Select the MINI from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. MINI iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered.. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for MINI © 2008 Autoland Scientech. Page 2 MINI 3. CONNECT TO THE VEHICLE Select MINI by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. MINI ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for MINI. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for MINI © 2008 Autoland Scientech. Page 3 MINI START TO DIAGNOSE MINI TROUBLE SHOOTING iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The 2. software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for MINI © 2008 Autoland Scientech. Page 4 MITSUBISHI® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for MITSUBISHI diagnostic system. Please note that prior to the year 2000 most vehicles were equipped with 12-pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. For new models after 2006, the communication protocol of ECUs is CAN. Please use OBDII-IM5 first on new models, then try ASIAN-IM1 if the communication with some systems are failed. 12-PIN Socket For the old models which equipped with 12-PIN round socket, located in the fuse box under the steering wheel on the driver side. Some models may be equipped with OBD-II and 12-PIN connectors together. Try both connectors by using ASIAN-IM1. 2. SELECT THE INTERFACE MODULE There are two interface modules available for MITSUBISHI diagnostic system, OBDII-IM5 and ASIAN-IM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for MITSUBISHI © 2008 Autoland Scientech. Page 1 MITSUBISHI AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the MITSUBISHI from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. If the model is equipped with 12-PIN diagnostic socket, plug the cigarette lighter power cable, BU-EC1. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 MITSUBISHI iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for MITSUBISHI © 2008 Autoland Scientech. Page 2 MITSUBISHI 3. CONNECT TO THE VEHICLE There are two interface modules available for the diagnostic system, OBDII-IM5 and ASIAN-IM1. OBDII-IM5 ASIAN-IM1 OBD-II Full Specification Multiplexer ASIAN Interface Module for TOYOTA / NISSAN / MITSUBISHI / HYUNDAI / KIA OBDII-AC-16P MIT-AC-12P BU-EC-1 The most common adapter for the new models. Connect to the OBDII-IM5 or ASIAN-IM1 with AC-EC1. The adapter for the old models. Connect to the ASIAN-IM1 with AC-EC1. Ashtray lighter power cable, the power source for 12-PIN diagnostic socket models. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for MITSUBISHI © 2008 Autoland Scientech. Page 3 MITSUBISHI ADAPTERS AND INTERFACE MODULE Select MITSUBISHI by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. MITSUBISHI ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for MITSUBISHI. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for MITSUBISHI © 2008 Autoland Scientech. Page 4 MITSUBISHI START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. For models manufactured at 2006, which interface module should I insert? Try OBDII-IM5 first, then ASIAN-IM1. OBDII-IM5 is applicable to CAN-protocol, and ASIANIM1 is to MITSUBISHI specific protocol. To connect with CAN-protocol models, ASIAN-IM1 may send traditional signals to interrupt the inter-connection of the CAN-bus and cause fault codes. Please use OBDII-IM5 with iSCAN-II MITSUBISHI diagnostic software to clear the fault code. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for MITSUBISHI © 2008 Autoland Scientech. Page 5 MITSUBISHI TROUBLE SHOOTING OPEL® VAUXHALL®DIAGNOSTIC SYSTEM GETTING STARTED iSCAN-II OPEL Diagnostic Software has many sub-versions for different areas. 1. FIND THE DIAGNOSTIC SOCKET There are 3 kinds of diagnostic sockets for OPEL / VAUXHALL diagnostic system. Please note that prior to the year 1998 most vehicles were equipped with 12-pin socket or 10-pin socket. OBD-II Socket Most OBD-II diagnostic socket is located under the steering wheel on driver side. 12-PIN Socket For the old models equipped with 12-PIN socket, the connector of the socket needs the power source from Ashtray lighter power cable. 10-PIN Socket The 10-Pin socket is located either in the engine compartment beside the driver side or in the absorber strut tower on passenger side. 2. SELECT THE INTERFACE MODULE There is only one interface module available for OPEL diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. ISCAN-II for OPEL © 2008 Autoland Scientech. Page 1 OPEL / VAUXHALL AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the OPEL from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. OPEL iSCAN-II (V1.00) 6. OPEL UK iSCAN-II (V2.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ISCAN-II for OPEL © 2008 Autoland Scientech. Page 2 OPEL / VAUXHALL 3. CONNECT TO THE VEHICLE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBD-II Full Specification Multiplexer OBDII-AC-16P GM-AC-12P OPL-AC-10P The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. The adapter for the old models. The adapter for the old models. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. ISCAN-II for OPEL © 2008 Autoland Scientech. Page 3 OPEL / VAUXHALL ADAPTERS AND INTERFACE MODULE Select OPEL by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. OPEL ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for OPEL / VAUXHALL. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. ISCAN-II for OPEL © 2008 Autoland Scientech. Page 4 OPEL / VAUXHALL START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The 2. software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. ISCAN-II for OPEL © 2008 Autoland Scientech. Page 5 OPEL / VAUXHALL TROUBLE SHOOTING PERODUA® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket The OBD-II diagnostic socket is located under the steering wheel on driver side. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for PERODUA diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for PERODUA © 2008 Autoland Scientech. Page 1 PERODUA AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the PERODUA from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. PERODUA iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for PERODUA © 2008 Autoland Scientech. Page 2 PERODUA 3. CONNECT TO THE VEHICLE Select PERODUA by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. PERODUA ENGINE A/T ABS SRS EPS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for PERODUA. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for PERODUA © 2008 Autoland Scientech. Page 3 PERODUA START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for PERODUA © 2008 Autoland Scientech. Page 4 PERODUA TROUBLE SHOOTING PEUGEOT® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. Some of them can be found behind the Ashtray box or the relay box. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for PEUGEOT diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for PEUGEOT © 2008 Autoland Scientech. Page 1 PEUGEOT AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the PEUGEOT from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP FRENCH PKG 1 1 RENAULT 2 iSCAN-II (V1.00) 2 CITROEN iSCAN-II (V1.00) 3 PEUGEOT iSCAN-II (V1.00) 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for PEUGEOT © 2008 Autoland Scientech. Page 2 PEUGEOT 3. CONNECT TO THE VEHICLE Select PEUGEOT by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. PEUGEOT 106 206 207 306 307 406 407 607 ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for PEUGEOT. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for PEUGEOT © 2008 Autoland Scientech. Page 3 PEUGEOT START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for PEUGEOT © 2008 Autoland Scientech. Page 4 PEUGEOT TROUBLE SHOOTING PORSCHE® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic adapters for PORSCHE diagnostic system. Please note that prior to the year 2000 most vehicles were equipped with the PORSCHE specified socket under the dash board. OBD-II Socket For the newer models, ex. Cayenne, 996, Cayman...etc, the diagnostic socket can be found under the dashboard on driver side and covered by a plastic cover. It is very close to side kicker and near the door. OBD-II socket 19-PIN PORSCHE Specified Socket 19-Pin diagnostic socket can be found under the dashboard on driver side or under the glove compartment on passenger's. 2. SELECT THE INTERFACE MODULE There is only one interface module available for PORSCHE diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for PORSCHE © 2008 Autoland Scientech. Page 1 PORSCHE AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the PORSCHE from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module PORSCHE 3. CONNECT TO THE VEHICLE 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. PROSCHE iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. PCSH-AC-19P OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for The adapter for the old the new models. Connect to the models. Connect directly to OBDII-IM5 with AC-EC1. iSCAN-II using BU-EC. iSCAN-II for PORSCHE © 2008 Autoland Scientech. Page 2 PORSCHE There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. Select PORSCHE by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. PORSCHE Cayenne Cayman 997 987 996 986 968 944 DME 7.2 ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION ADAPTATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for PORSCHE. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for PORSCHE © 2008 Autoland Scientech. Page 3 PORSCHE START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything in LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for PORSCHE © 2008 Autoland Scientech. Page 4 PORSCHE TROUBLE SHOOTING AUT LAND® S C I E N T E C H PROTON® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for PROTON diagnostic system. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. Please use ASIAN-IM1. 12-PIN Socket For the old models equipped with 12-PIN round socket, located in the fuse box under the steering wheel on driver side. Some models may be equipped with OBD-II and 12-PIN connectors together. Try both connectors by using ASIAN-IM1. 2. SELECT THE INTERFACE MODULE There is only one interface module available for PROTON diagnostic system, ASIAN-IM1. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for PROTON © 2008 Autoland Scientech. Page 1 PROTON iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the PROTON from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. If the model is equipped with 12-PIN diagnostic socket, plug the cigarette lighter power cable, BU-EC1. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. PROTON iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. iSCAN-II for PROTON © 2008 Autoland Scientech. Page 2 PROTON 3. CONNECT TO THE VEHICLE There is only one interface module available for the diagnostic system, ASIAN-IM1. ASIAN-IM1 ASIAN Interface Module for TOYOTA / NISSAN / MITSUBISHI / HYUNDAI / KIA OBDII-AC-16P MIT-AC-12P BU-EC-1 The most common adapter for the new models. Connect to the ASIAN-IM1 with AC-EC1. The adapter for the old models. Connect to the ASIAN-IM1 with AC-EC1. Ashtray lighter power cable, the power source for 12-PIN diagnostic socket models. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for PROTON © 2008 Autoland Scientech. Page 3 PROTON ADAPTERS AND INTERFACE MODULE Select PROTON by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. PROTON ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for PROTON. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for PROTON © 2008 Autoland Scientech. Page 4 PROTON START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for PROTON © 2008 Autoland Scientech. Page 5 PROTON TROUBLE SHOOTING RENAULT® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic sockets can be found under the dashboard on driver side and are covered by a plastic cover. Some of them can be found behind the Ashtray or the relay box. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for RENAULT diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for RENAULT © 2008 Autoland Scientech. Page 1 RENAULT AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the RENAULT from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP FRENCH PKG 1 1 RENAULT 2 iSCAN-II (V1.00) 2 CITROEN iSCAN-II (V1.00) 3 PEUGEOT iSCAN-II (V1.00) 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDIIIM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for RENAULT © 2008 Autoland Scientech. Page 2 RENAULT 3. CONNECT TO THE VEHICLE Select RENAULT by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. RENAULT AVANTIME CLIO II ESPACE KANGOO LAGUNA MEGANE THALIA TRAFIC ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for RENAULT. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for RENAULT © 2008 Autoland Scientech. Page 3 RENAULT START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for RENAULT © 2008 Autoland Scientech. Page 4 RENAULT TROUBLE SHOOTING SAAB® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II SAAB Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for SAAB diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for SAAB © 2008 Autoland Scientech. Page 1 SAAB AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diangostic socket in the vehicle. Select the SAAB from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. SAAB iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for SAAB © 2008 Autoland Scientech. Page 2 SAAB 3. CONNECT TO THE VEHICLE Select SAAB by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. SAAB ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for SAAB. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for SAAB © 2008 Autoland Scientech. Page 3 SAAB START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connect to the system but show 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for SAAB © 2008 Autoland Scientech. Page 4 SAAB TROUBLE SHOOTING SMART® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket Most OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. OBD-II socket Other Socket iSCAN-II SMART Diagnostic Software does not support the vehicles which are equipped with the other sockets. 2. SELECT THE INTERFACE MODULE There is only one interface module available for SMART diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for SMART © 2008 Autoland Scientech. Page 1 SMART AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the SMART from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. SMART iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for SMART © 2008 Autoland Scientech. Page 2 SMART 3. CONNECT TO THE VEHICLE Select SMART by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. SMART ENGINE TRANSMISSION ABS SRS TRANSMISSION ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for SMART. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for SMART © 2008 Autoland Scientech. Page 3 SMART START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for SMART © 2008 Autoland Scientech. Page 4 SMART TROUBLE SHOTTING SUBARU® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET OBD-II Socket The OBD-II diagnostic socket is located under the steering wheel on driver side. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for SUBARU diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for SUBARU © 2008 Autoland Scientech. Page 1 SUBARU AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the SUBARU from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) 5 SUBARU iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the new models. Connect to the OBDII-IM5 with ACEC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for SUBARU © 2008 Autoland Scientech. Page 2 SUBARU 3. CONNECT TO THE VEHICLE Select SUBARU by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. SUBARU ENGINE A/T ABS SRS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for SUBARU. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for SUBARU © 2008 Autoland Scientech. Page 3 SUBARU START TO DIAGNOSE iSCAN- II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for SUBARU © 2008 Autoland Scientech. Page 4 SUBARU TROUBLE SHOOTING SUZUKI® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for SUZUKI diagnostic system. Please note that prior to the year 1998, most vehicles are equipped with 12-Pin socket. OBD-II Socket Most OBD-II diagnostic sockets are located under the steering wheel on driver side. OBD-II socket 12-PIN Socket For the old models equipped with 12-PIN socket, please refer to the sticker direction under the dashboard on driver side and near the steering column. 2. SELECT THE INTERFACE MODULE There is only one interface module available for SUZUKI diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly. Select the adapter that corresponds to the socket, ex. OBDII-AC-16P. iSCAN-II for SUZUKI © 2008 Autoland Scientech. Page 1 SUZUKI AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicles. Select the SUZUKI from the screen of iSCAN-II. Press ENTER to start the diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 1 DAIHATSU NON-CAN 2 iSCAN-II (V1.00) 2 DAIHATSU CAN iSCAN-II (V1.00) 3 CHRYSLER iSCAN-II (V1.00) 4 FORD OEM(OBDII 95~) 3 HONDA MAZDA OEM(OBDII 01~) iSCAN-II (V1.00) 5. GM US iSCAN-II (V1.00) iSCAN-II (V1.00) 4 ACURA iSCAN-II (V1.00) 5 SUZUKI iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. GM-AC-12P OBDII-IM5 OBDII-AC-16P OBD-II Full Specification Multiplexer The most common adapter for the The adapter for the old models. new models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for SUZUKI © 2008 Autoland Scientech. Page 2 SUZUKI 3. CONNECT TO THE VEHICLE Select SUZUKI by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. SUZUKI ENGINE A/T ABS SRS EPS ENGINE ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for SUZUKI. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for SUZUKI © 2008 Autoland Scientech. Page 3 SUZUKI START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there's no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserve the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for SUZUKI © 2008 Autoland Scientech. Page 4 SUZUKI TROUBLE SHOOTING VASS® DIAGNOSTIC SYSTEM GETTING STARTED VASS means Volkswagen, Audi, Seat, Skoda (the Volkswagen groups). 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for VASS diagnostic system. Please note that prior to the year 1995, most vehicles were equipped with black/white socket under the engine hood. OBD-II Socket For the newer models, OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. For old models equipped with OBD-II socket, the location may be different. OBD-II socket BLACK / WHITE Socket BLACK / WHITE diagnostic socket can be found in the engine compartment beside the driver side. Or near the absorber strut tower on the either side of driver and passenger. 2. SELECT THE INTERFACE MODULE There is only one interface module available for VASS diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. iSCAN-II for VASS © 2008 Autoland Scientech. Page 1 VASS AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket in the vehicle. Select the VASS from the screen of iSCAN-II. Press ENTER to start to diagnostic function. If the model is not listed on the screen, try to press RIGHT / LEFT buttons to turn the page. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II(V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. VASS iSCAN-II (V1.00) 6. LANDROVER iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P VASS-C Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. The adapter for the old models. Connect to the OBDII-IM5 with AC-EC1. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for VASS © 2008 Autoland Scientech. Page 2 VASS 3. CONNECT TO THE VEHICLE Select VASS by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. AUDI Power Train Chassis Body Information and Communication 5 Air condition Engine ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM BASIC SETTING ADAPTATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. Autoland Scientech will keep updating the diagnostic software for VASS. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for VASS © 2008 Autoland Scientech. Page 3 VASS START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. 2. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owners. iSCAN-II for VASS © 2008 Autoland Scientech. Page 4 VASS TROUBLE SHOOTING VOLVO® DIAGNOSTIC SYSTEM GETTING STARTED 1. FIND THE DIAGNOSTIC SOCKET There are two kinds of diagnostic sockets for VOLVO diagnostic system. Please note that prior to the year 1997 most vehicles were equipped with AB-diagnostic socket under the engine hood. A/B Diagnostic Socket For the models 700/800/900 Series, between year 1989 to 1996, A/B diagnostic socket can be found in the engine compartment, behind the driver side or passenger side absorber strut tower. OBD-II Socket For the newer models, ex. S70 / S80 / XC90...etc, OBD-II diagnostic socket can be found under the dashboard on driver side and are covered by a plastic cover. It is very close to side kicker and near the door. OBD-II socket 2. SELECT THE INTERFACE MODULE There is only one interface module available for VOLVO diagnostic system, OBDII-IM5. Insert the interface module into the base unit firmly if the socket in the vehicle is OBD-II, and connect the adapter that corresponds to the socket, OBDII-AC-16P. Do NOT insert any interface module for old models equipped with AB-diagnostic socket. iSCAN-II for VOLVO © 2008 Autoland Scientech. Page 1 VOLVO AUT LAND® S C I E N T E C H iSCAN-II Documentation Plug the available diagnostic adapter into the diagnostic socket at the vehicles. Select the VOLVO from the screen in iSCAN-II. Press ENTER to start to diagnose. If the models are not listed in the screen, try to press RIGHT / LEFT buttons to find more models. MAIN MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 IMS2(Interface Module 1 2 Simulation System) 3 Component Test System 10 OBDII Standard Compliant iSCAN-II (V1.00) 20 SETUP 1 2 3 MB iSCAN-II (V1.00) 4. FIAT iSCAN-II (V1.00) 5. JAGUAR iSCAN-II (V1.00) 6. VOLVO iSCAN-II (V1.00) The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. ADAPTERS AND INTERFACE MODULE There is only one interface module available for the diagnostic system, OBDII-IM5. OBDII-IM5 OBDII-AC-16P D51-C-MBLV Insert this interface module for the models equipped with only OBD-II socket. The most common adapter for the new models. Connect to the OBDII-IM5 with AC-EC1. MB 8/16-pin and Volvo A/B connectors. The adapter for the old models. Connect directly to iSCAN-II using BU-EC. There are some adapters available. Refer to the “Diagnostic Cable Connection Quick Manual” for more detailed connection / wiring information. iSCAN-II for VOLVO © 2008 Autoland Scientech. Page 2 VOLVO 3. CONNECT TO THE VEHICLE Select VOLVO by pressing the ENTER button. Turn ignition ON or make engine running at idle. WARNING! Ignition ON without engine running may have a flat battery. Select the system from the screen. There may be many systems on the vehicle, try to press RIGHT button to turn the page. If the ECU response is successful, the screen will show all the available functions. VOLVO XC90 1 Models up to 1997 2 Models from 1997 ID CODES READ FAULT CODE CLEAR FAULT CODE DATA STREAM ACTIVATION ADAPTATION The figure is for reference only. Autoland Scientech updates the software very often. The screen shown may not be the same as the newest software delivered. We may simplify the steps of the procedure. Autoland Scientech will keep updating the diagnostic software for VOLVO. Please refer to the software specification. Visit our website, http://www.autolandscientech.com , and apply for membership. You will get E-paper every month and find more diagnostic technical information. iSCAN-II for VOLVO © 2008 Autoland Scientech. Page 3 VOLVO START TO DIAGNOSE iSCAN-II never shows anything on LCD screen and there’s no back-light? 1. 2. 3. 4. Please check the cable and the connector again. The voltage of the battery should be higher than 10V. Check the power from OBD-II connector. PIN-16 is power, PIN-4 or PIN-5 is ground. Check fuses in BU-EC (25-Pin Base Unit Extension Cable). iSCAN-II never shows anything on LCD screen and the back-light is ON? 1. 2. Check the diagnostic software using iSCAN-II/PSModule3 File Manager from PC. The software for iSCAN-II may be missing or broken. Adjust the brightness dial for the LCD panel. The brightness may be too dark. Can't find the system on the screen? 1. 2. Press Right button for more systems. There are too many systems which can't be shown on the same page. The diagnostic software does not have this system. Please refer to the specification. We apologize for the inconvenience. The green or yellow LED flashed on for a while, then showed 'CONNECTION FAILED' on the LCD screen? 1. 2. 3. 4. Make sure the ignition is ON or make the engine running at idle. Ignition OFF for a while, then Ignition ON and try again. Check the cable and the adapter. Unplug all cables and adapters and plug-in again. Make sure the vehicle equips with the correct system. For example, the manual transmission will not have A/T transmission ECU. 5. The vehicle will NOT equip with all the systems listed on the software. Some special systems are only available on the luxury models. 6. The ECU is malfunction or the diagnostic line from the ECU is open or short to the ground or power. 7. Battery voltage is too low. Successfully connected to the system but shows 'VERSION UNKNOWN' on the LCD screen? Due to the prompt development of the Motor manufactures, the diagnostic software might not be able to communicate with all ECU versions. Download the newest software from the member area of Autoland Scientech website and try again. (http://www.autolandscientech.com) If the same situation occurs, please report the information of ID pages to our local distributors. We will keep updating the diagnostic software for new ECUs. Please excuse any inconvenience this may cause. Successfully connects to the system but shows 'LINK FAILURE' on the title? Some ECUs are not as stable as our research department expected. Please report the information of ID pages to our local distributors. Our R/D department will do our best to fix the problems as soon as possible. Please excuse any inconvenience this may cause. The ECU successfully responds but the data stream seems wrong? Try to select OTHER YEARS. VOLVO changes the protocols EVERY year and the manufacture year may not be the same as the list in the license plate. For A/B diagnostic sockets: The ECU failed to respond, received fault codes? For old cars, the ground pin of an A/B diagnostic socket is not so stable. Try to make the ground pin stable by connect a wire to the battery or polish the ground in the diagnostic socket. iSCAN-II for VOLVO © 2008 Autoland Scientech. Page 4 VOLVO TROUBLE SHOOTING Fail to reset the service light for S70 / V70 ? Document Version 1.00 for iSCAN-II, © 2008 Autoland Scientech The information contained herein is the exclusive property of Autoland Scientech® and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of Autoland Scientech®. Autoland Scientech® reserves the right to make any change without notice. The trademarks mentioned belong to the owner. iSCAN-II for VOLVO © 2008 Autoland Scientech. Page 5 VOLVO The service light can not be reset directly. Modify the service time / distance, then reset the service again. USER’S NOTICE ACKNOWLEDGMENT Products referred to in this manual are mentioned for identification purposes only. Product names appearing in this manual or on the Scanner’s screen may or may not be registered trademarks or copyrights of their respective companies. ACURA is a registered trademark of Honda Motor Company, Limited. ALFA ROMEO is a registered trademark of Fiat S.p.A. AUDI is a registered trademark of AUDI AG. BENTLEY is a registered trademark of Bentley Motors Limited, Volkswagen AG. BMW is a registered trademark of Bayerische Motoren Werke AG. BUICK is a registered trademark of General Motors Corporation. CADILLAC is a registered trademark of General Motors Corporation. CHERY is a registered trademark of Chery Automobile Co., Ltd.. CHEVROLET is a registered trademark of General Motors Corporation. CHRYSLER is a registered trademark of Chrysler LLC. CITROЁN is a registered trademark of PSA Peugeot Citroën. DAEWOO is a registered trademark of GM Daewoo Auto & Technology. DAIHATSU is a registered trademark of GM Daihatsu Motor Company. DODGE is a registered trademark of Chrysler LLC. FIAT is a registered trademark of Fiat S.p.A. FORD is a registered trademark of Ford Motor Company. GM is a registered trademark of General Motors Corporation. GMC is a registered trademark of General Motors Corporation. GREATWALL is a registered trademark of Great Wall Motor Company. HOLDEN is a registered trademark of GM Holden Ltd. HONDA is a registered trademark of Honda Motor Company, Limited. HYUNDAI is a registered trademark of Hyundai Motor Company. INFINITI is a registered trademark of Nissan Motor Company. ISUZU is a registered trademark of Isuzu Motors Ltd. JAGUAR is a registered trademark of Jaguar Cars Limited. JEEP is a registered trademark of Chrysler LLC. KIA is a registered trademark of KIA Motors, Hyundai Kia Automotive Group. LANDROVER is a registered trademark of Premier Automotive Group, Ford Motor Company, and Tata Motors. LEXUS is a registered trademark of Toyota Motor Corporation. MAYBACH is a registered trademark of Maybach-Motorenbau GmbH, Daimler AG. MAZDA is a registered trademark of MAZDA Motor Corporation. MERCEDES BENZ is a registered trademark of Daimler AG. MINI is a registered trademark of Bayerische Motoren Werke AG. MITSUBISHI is a registered trademark of Mitsubishi Motors Corporation. NISSAN is a registered trademark of Nissan Motor Company. OLDSMOBILE is a registered trademark of General Motors Corporation. OPEL is a registered trademark of Adam Opel GmbH, General motors Corporation. PONTIAC is a registered trademark of General Motors Corporation. PERODUA is a registered trademark of Perodua Automotive. PEUGEOT is a registered trademark of PSA Peugeot Citroën. PORSCHE is a registered trademark of Porsche AG. PROTON is a registered trademark of Proton Holdings Berhad. RENAULT is a registered trademark of Renault S.A. SAAB is a registered trademark of Saab Automobile AB. SATURN is a registered trademark of Saturn Corporation, General Motors Corporation. SCION is a registered trademark of Toyota Motor Corporation. SEAT is a registered trademark of SEAT S.A., Volkswagen Group. SKODA is a registered trademark of Skoda Auto, Volkswagen Group. SMART is a registered trademark of Smart GmbH, Daimler AG. SSANGYONG is a registered trademark of SsangYong Motor Company. SUBARU is a registered trademark of Fuji Heavy Industries Co., Ltd. SUZUKI is a registered trademark of SUZUKI Motor Corporation. TOYOTA is a registered trademark of Toyota Motor Corporation. VOLKSWAGEN is a registered trademark of Volkswagen AG. VOLVO is a registered trademark of the Volvo Car Coporation, Ford Motor Company. SII is a registered trademark of Seiko Instruments Inc. Microsoft © and Windows © are registered trademarks of Microsoft Corporation. COPYRIGHT ® This instruction manual and PC Scanner CD-ROM are published by AUTOLAND SCIENTECH and are protected by copyright and other intellectual property rights in existence at all times and in all territories throughout the world. Permission is hereby granted to print a hard copy ONLY for the sole purpose of using this as an information resource for ® operating products manufactured by AUTOLAND SCIENTECH . No part of this instruction manual or the PC Scanner software may be reproduced republished or transmitted, in any form or by any means, whether electronic, mechanical, ® copied, or otherwise, unless a prior consent from AUTOLAND SCIENTECH has been obtained. DISCLAIMER AND LIABILITY The information and illustrations contained in this manual are based on the latest information available at the time of ® publication. AUTOLAND SCIENTECH reserves the right to make changes at any time without notice. This instruction manual tells users how to use the Scanner to perform diagnostic tests and find possible locations of vehicle problems. It does NOT tell users how to correct the problems. Consult the manufacturer’s vehicle service manual or other publication for repair instructions. To make full use of the Scanner’s capabilities, the user should be knowledgeable and well-trained in each of the vehicle computer control systems described in this manual. Service data that appear to be non-functional on some vehicles may be due to changes in vehicle manufacturing design. In ® addition, AUTOLAND SCIENTECH shall not accept responsibility for any incidental or consequential damages under any circumstances, in connection with using this instructional manual or PC-Scanner software, nor shall AUTOLAND ® SCIENTECH be liable for any errors contained in this instruction manual. iSCAN-II Manual, Version 1.0 May 2008 ® © Copyright 1998 by AUTOLAND SCIENTECH Co., Ltd. All rights reserved OPERATIONAL GUIDELINES This section explains crucial operational guidelines that must be observed when using diagnostic tools and memory ® cartridges produced by AUTOLAND SCIENTECH . It is important to read these guidelines before operating on a vehicle in order to avoid any personal injury or damage to the vehicle or diagnostic equipment. TO AVOLD VOLTAGE SPIKES To avoid the possible voltage spikes and to protect the vehicle and diagnostic tools from resultant damage, please do not connect or disconnect the diagnostic tool while the ignition key is ON or while the engine is running. TURN THE DIAGNOSTIC TOOL OFF WHILE INSERTING/REMOVING MEMORY CARTRIDGE Please do not insert or remove memory cartridges while the diagnostic tool’s power is ON. To change a memory cartridge, please follow the steps below: a. Turn the ignition OFF. b. Disconnect the diagnostic tool’s power supply source. c. Change the memory cartridge. d. Reconnect the diagnostic tool’s power supply source. e. Turn the ignition ON. PUT THE PARKING BRAKE ON In order to avoid personal injury or damage to the vehicle that might result from incorrect operation, please always apply the parking brake and block the wheels when operating the diagnostic tool. DANGER! DRIVING TEST Please DO NOT leave any moving parts below the driving seat. Any moving parts may block the brake pads. The car will lost control and the drivers will injure if the brake fail. DO NOT drive too quick if the diagnostic connecter is below the engine hood. Too heavy the wind will open the engine hood because the hood is not proper locked. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Create Date : 2008:12:09 14:39:46+08:00 Modify Date : 2008:12:09 14:39:46+08:00 Metadata Date : 2008:12:09 14:39:24+08:00 Document ID : uuid:71A34B1EBCC5DD1183AFC03BE823F659 Instance ID : uuid:8200a3b5-b996-46b8-8ad0-ebd38e609f01 Derived From Instance ID : uuid:a355ab32-c8a6-4015-b4e0-9c6622537b4a Derived From Document ID : uuid:2cb7898d-8522-497f-8c40-e8b4c34fe09e Format : application/postscript Title : untitled Page Count : 148EXIF Metadata provided by EXIF.tools