AVITA SCW-10XX Bluetooht Weight Scale User Manual Instruction Manual

Download:
Mirror Download [FCC.gov]
Document ID	1334224
Application ID	wMCDpSJxRG9jckZYgT6Zow==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	52.32kB (654021 bits)
Date Submitted	2010-08-27 00:00:00
Date Available	2010-08-27 00:00:00
Creation Date	2010-06-25 12:03:31
Producing Software	Corel PDF Engine Version 1.0.0.536
Document Lastmod	0000-00-00 00:00:00
Document Title	Instruction Manual.cdr
Document Creator	CorelDRAW 版本 12.0

Model : SC101
Specifications SC101
Before Use
Precautions……………………………….... 1
Scale Components………………………... 2
Error Displays..…………………………..... 3
Installing(or Replacing) Batteries …….... 4
Operations
Measurement weight……….………………6
Wireless connection…………….………… 8
References
Specifications……………………………… 9
Maintaining the Scale……………..……... 9
FCC Staeement.................................10
Read Before Use
Type BF Applied Part
Precautions
Please read this booklet before using your scale.
Do not place your scale on a soft, wet or slippery
floor.It is recommended that the scale be used on
a solid level surface, such as tile, wood, or
laminate flooring.
Place your scale on a solid level flooring surface.
Your scale contains delicate, high-precision
parts. Avoid extremes in the temperature,
humidity, direct sunlight,shock , moisture and
dust.
Do not disassemble repair, or remodel the scale.
Do not step onto your scale with wet feet. Make
certain that feet are dry to prevent slipping or
serious injury.
Do not step on the edge.
Do not place feet on the display window.
Indications for use
This scale is designed for indoor use to measure
the weight.
Scale components
Front
Display
RESET
Bluetooth
KG/L
Slide Mod
Back
!
The following measurement can be selected by
slide switch and are classified into two
categories WEIGHT MODE and WEIGHT
CONNECTION MODE, you have choice to
select and have your weight displayed in KG or
LB.
The scale has an “automatic- power-off”
function to turn off in about sixty seconds after
non-operation.
Error Display
Low battery mark
(Replace the batteries
with new ones)
Your weight is overload
Installing (or Replacing) Batteries
Caution:
Insert the battery with the positive (+) and
negative (-) terminals properly aligned with the
corresponding symbols in the battery
compartment.
Improper installation of the batteries may
cause battery leakage.
Replace all four batteries with new ones, when
“Lo” symbol is displayed.
Do not mix used and new batteries. It may
result in damage to the scale or shorten battery
life.
The battery life is dependant upon the
environmental temperature, battery type and
usage.
Remove the batteries from the battery
compartment, when the scale is not to be used
for a long time. They may leak and damage
your scale.
Discard waste batteries according to the local
law.
Steps for Installing (or Replacing) Batteries
1. Remove the battery
compartment cover on
the underside of the
scale by gently pushing
on the arrow and lifting
the cover backward.
2. Place four new batteries
with the positive (+) and
negative (-) terminals
properly aligned with the
corresponding symbols
in the battery compartment.
3. Replace the cover by sliding
it into the compartment and
gently pressing into place.
Measurement Weight
Measurement Your Weight
1. Slide switch to correct
Mode Example
A: Set the slide switch to
“BLUETOOTH ON”, Tap
on the scale,the scale
will calibrate and display
. Bluetooth indicator
light to flash, Means
Bluetooth connection is
open. (Concrete
operation please look at in
wireless connection)
B. Set the slide switch to
“BLUETOOTH OFF”,Tap
on the scale, the scale ill
calibrate and display
Bluetooth indicator light
is power-off, This is
measurement weight
only All display segments
are visible for three
seconds.
Wait until 0.00 is displayed.
(The display show
0.00kg/0.00lb)
Step on the scale and position
your feet in a manner that will
distribute your weight evenly
over the entire scale platform.
The LCD display will flash two
times, then the display will
show your weight. Stand still
while reading the display.
Now you step off the scale,
the display will show
0.00kg/0.00lb,You can
measurement your weight
again.
(Caution: If you remain standing on the scale
or step off the scale without sixty seconds after
your weight has displayed and then turn off
automatically).
Wireless Connection
1. Turn the Scale to the back side.
2. Turn on the bluetooth switch (From “0” to “1”),
while the device is performing an inquiry to find
other devices to which to connect, the LED on
the front side of the Scale will be quickly flashing.
When the device connects successfully to health
Monitoring devices, such as a computer or a
mobile phone, the LED is keeping on shining. At
the end of the measurement, your Scale will be
sent to your health monitoring device.
3.To disconnect from health monitoring devices,
turn off the bluetooth switch (From “1” to “0”),
then the LED will stop shining.
RESET
Bluetooth
KG/L
Slide Mod
Back
Specifications SC101
Digital display
Maximum capacity
Minimum display
Bluetooth connection
Power source
batteries
Battery life
Liquid crystal display,
38mm character height
200kg/440lb
0.05kg/0.11lb
BlueMod+B20 (
Stollmann E+V GMBH))
Four type AAA
(1.5 volt X 4, included)
Approximately 1000
Measurements
5℃~35℃,30~85%RH
Operation Environment
Storage & Transportation
Environment
-20℃~60℃,10~95%RH
Specifications are subjects to change without
prior notice and any obligation on the part of the
manufacturer.
Maintaining the scale
□ Clean the scale with a dry, soft cloth or a
cloth moistened with water and a mild
detergent. Never use alcohol, benzene,
thinner or other harsh chemicals to clean
the scale.
□ Remove the batteries, if the scale is not
going to be used for a long time.
FCC Statement
FCC Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be colocated or operating in conjunction with any other
antenna or transmitter.
10
EC
REP
EU Representative:
Golden Star Computer (UK) Ltd.,
Unit 39, Rainbow Industrial Estate,
Trout Road, West Drayton,
Middx. UB7, 7RN, United Kingdom
AViTA Corporation
9F, No.78, Sec.1, Kwang-Fu Rd.,
San-Chung, Taipei County,
Taiwan
No.28 Xinyang Road,
Economic Development Zone,
Yangzhou City, Jiangsu Province,
China 225009

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Creation Date--Text             : 
Producer                        : Corel PDF Engine Version 1.0.0.536
Mod Date--Text                  : 
Creator Tool                    : CorelDRAW 版本 12.0
Modify Date                     : 2010:08:24 10:39:57+08:00
Metadata Date                   : 2010:08:24 10:39:57+08:00
Format                          : application/pdf
Title                           : Instruction Manual.cdr
Document ID                     : uuid:3eab1fac-9160-4704-a13f-2a7db05501c7
Instance ID                     : uuid:19fbb920-747a-406c-8ed9-435c9fcb3287
Has XFA                         : No
Page Count                      : 13
Create Date                     : D:20100625120331
Creator                         : CorelDRAW 版本 12.0

EXIF Metadata provided by EXIF.tools