Abocom Systems AOP7120 AOP7120 Super WiFi CPE/AP User Manual

Abocom Systems Inc AOP7120 Super WiFi CPE/AP Users Manual

Users Manual

LAN Use standard LAN cables (RJ45 connectors) to connect your PCs to this port. If required, any port can be connected to other hub. Any LAN port will automatically function as an “Uplink” port when necessary. WAN 1. Connect a 24V PoE switch to get power with RJ45 cable. 2. Connect the ADSL or Cable Modem to a PoE switch to get Internet connection. If your modem came with a cable, use the supplied cabled, otherwise, use a standard LAN cable. Quick Install GuideAOP7120 Super WiFi CPE/AP 1 Hardware Overview Hardware Connection 2Step1. Connect to your local area network:connect the Ethernet cable to LAN port of the device, and the other end to a PC, hub, switch, router or other Wireless Access Point. Step2. Power on the device: power on the device by PoE switch via WAN port. Step3. Check the LEDs: the power LED should be always on when system is ready. Login Software Configuration 3Wireless_2.4G DefaultSSID: OpenWRT2G Security: none 1. Start your computer and make sure the connection by an Ethernet cable between your computer and the Wireless Router. 2. Start your WEB Browser. 3. In the Address box, enter the IP address: 192.168.1.1 4. Login User Name “admin” and Password “password”

Navigation menu