Abocom Systems BSH203 Bluetooth Stereo Headset User Manual bsh203 headset indd

Download:
Mirror Download [FCC.gov]
Document ID	557672
Application ID	STTHxcm4AxCl5E488NkxXw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	50.44kB (630544 bits)
Date Submitted	2005-06-30 00:00:00
Date Available	2005-06-30 00:00:00
Creation Date	2005-04-28 16:50:23
Producing Software	Adobe PDF Library 6.0
Document Lastmod	2005-06-22 10:24:43
Document Title	bsh203-headset.indd
Document Creator	Adobe InDesign CS (3.0.1)

1—Check the package contents
3—Turn on the power
To turn on the power, press and hold the
power button until the power LED lights blue.
To turn off the power, press and hold the
power button until the power LED turns off.
Unpack the Bluetooth Headset and check
that the following items are included:
Power/link LED
FF
Mute
on/off
Bluetooth A/V Transmitter
or Bluetooth Audio Dongle
OFF
Forward/
backward
DC jack
FF
Bluetooth Headset
Charging LED
Power button
USB Cable
Quick Guide
Audio Cable
Power Adapter
Battery low LED
Volume +/-
Blue LED power is on
Blue flashing LED connected to device
Red LED battery is charging, turns off when
charged
Red flashing LED battery is low, recharge
before LED turns off
2—Charge the battery
4—Pair with headset or audio dongle
The battery lasts eight hours and is recharged using the power adapter or the
USB cable. To recharge:
Plug the USB cable into the DC jack on
the Bluetooth Headset and connect the
other end to your PC.
or
Plug the power adapter into the DC jack
on the Bluetooth Headset and connect the
other end to an electrical outlet.
The Bluetooth Headset can be used with
a Bluetooth A/V Transmitter or Bluetooth
Audio Dongle. On first use, the devices must
be paired.
To pair the devices.
1. Connect your transmitter to an audio
device.
2. Turn on the power on your Bluetooth
Headset.
3. Turn on the power on the transmitter.
Recharging takes 90 minutes.
7—Troubleshooting
5—Wait for devices to connect
The devices connect (pair) after 90 seconds.
If the Bluetooth Headset does not work, try
the following:
- Ensure connecting devices are charged
- Turn off all devices and then turn them on
in the order shown in this guide
- Ensure devices are within the 10-meter
range
90 seconds
6—Using with your mobile phone
The Bluetooth Headset can be used with a
8—Specifications
Standards
Bluetooth specification V1.2 compliant.
Bluetooth A2DP profile (AV Profile)
Bluetooth AVRCP profile
Headset and Hand free
Power save mode (power sleep mode).
Frequency Band
2402 ~ 2480 MHz
Tx Power
0.25 ~ 2.5mW (Bluetooth Power Class II)
Rx Sensitivity
< -80dBm (BER 0.1%)
Distance
> 10m (open space)
Audio Streaming Format
SBC 48.000 kHz
Audio Frequency Range
20Hz ~ 22 kHz
Audio S/N
> 85dB
Audio THD
< -83dB
Audio Output Power
> 20mWrms
Power supply
Supply by integrated rechargeable battery cell. Music plays : > 5hrs.
Physical Specification:
Dimension: 180x140x60(max), 98x72x75(min)
Weight: 62 gm
Environmental Range:
Operating temperature:-10 ~ +50 degrees centigrade
Humidity: Relative humidity 0 ~ 95%
Bluetooth-enabled mobile phone.
To pair with your phone
1. Enable Bluetooth on your phone (refer to
the phone’s user manual).
2. Turn on the headset.
3. In the phone’s Bluetooth menu, search for
devices.
4. Select Stereo Headset.
5. Enter the passcode “0000”.
Answering calls
To answer a call, push the power button.
To end a call, push the power button for
three seconds.
Serial number & Firmware version:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:04:28 16:50:23Z
Creator                         : Adobe InDesign CS (3.0.1)
Modify Date                     : 2005:06:22 10:24:43+08:00
About                           : uuid:6dc553a4-c4d8-4936-821e-5a63addd53e7
Producer                        : Adobe PDF Library 6.0
Trapped                         : False
Creation Date                   : 2005:04:28 16:50:23Z
Mod Date                        : 2005:06:22 10:24:43+08:00
Metadata Date                   : 2005:06:22 10:24:43+08:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:1acb4242-b78f-11d9-989a-c10db2e6f088
Instance ID                     : uuid:b213de4a-323a-44e3-a80a-724d36e0afb5
Derived From Instance ID        : 1acb4241-b78f-11d9-989a-c10db2e6f088
Derived From Document ID        : adobe:docid:indd:bc11325b-b2d9-11d9-a394-ffa3098e626b
Format                          : application/pdf
Title                           : bsh203-headset.indd
Page Count                      : 3

EXIF Metadata provided by EXIF.tools