Abocom Systems PLW52 11n WiFi Extender Smart Plug User Manual PLW522 PLW52P PLW52S QIG ok

Download:
Mirror Download [FCC.gov]
Document ID	2318189
Application ID	naHxPQWnGABwqV8FmF1N2A==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.24kB (152967 bits)
Date Submitted	2014-07-08 00:00:00
Date Available	2014-07-08 00:00:00
Creation Date	2017-10-22 02:40:08
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 02:40:08
Document Title	Microsoft Word - PLW522_PLW52P_PLW52S_QIG-ok.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	SharonJiang

PLW522(P)(S)MA / PLW522(P)(S)ME /
PLW522(P)(S)MK WiFi Smart Plug
Power on the Extender
Step1. Plug your Wireless Extender into an
electrical socket.
Step2. Check the LEDs: the power LED
should be always on when system is
ready.
Quick
Install
Guide
Setup for Repeater Mode
Manually Configuration:
Step1. Open Wireless Settings / AP Client
page.
Step2. Setup the SSID and Security of AP
that you want to connect to: Click
APPLY to finish.
Connect to the Wireless
Extender
Notes:
The Wireless Extender is designed as a pure wireless
device, so there are no any RJ-45 ports for Ethernet
cable to connect to. Please prepare any IEEE802.11
ac/b/g/n compliant wireless adapter for next setup
step.
Step1. Default SSID is “PLW522MS-24” and
security key is “12345678”.
OR you can use “SCAN” to refresh the
wireless network and select an AP to
connect to.
Step2. Set your wireless adapter in DHCP
client and waiting for getting IP
Address from the Wireless Extender.
Step3. Open a web browser and enter
“192.168.1.254” in URL field to open
the configuration page.
Step4. Default user name is “admin” and
password is “password” to access
WEB GUI.
“The product shall be used in the residential
environment notwithstanding use in commercial,
business environments. If you want to use other
than the above environments, please contact
AboCom first.”
WPS Configuration:
Step1. Press the WPS button of the Wireless
Extender over 3 seconds.
Step2. Then press the WPS button of the
wireless router/AP over 3 seconds
too. Step 1 and Step 2 need to be
done in 200 seconds.
4
Check if Connected
The green–checked icon ahead is the
Wireless Router/AP which the Wireless
Extender is working to.
Hardware Button Behavior
WPS button behavior:
Less than 2 sec → N/A, WPS LED no blinking.
More than 2 sec → Do WPS, WPS LED start blinking
Reset button behavior:
Less than 2 sec → N/A, D5-D1 LEDs no blinking.
2-5 seconds → Do REBOOT, D5-D1 LEDs fast blinking.
More than 5 sec→ Do Factory Default, D5-D1 LEDs
blinking slowly.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not
possible.
This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter
except in accordance with FCC multi-transmitter product procedures.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : SharonJiang
Create Date                     : 2014:07:07 17:38:03+08:00
Modify Date                     : 2014:07:07 18:01:03+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : SharonJiang
Title                           : Microsoft Word - PLW522_PLW52P_PLW52S_QIG-ok.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2014:07:07 18:01:03+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:2191165d-7226-4ce9-a67e-08d1cc2de3e1
Instance ID                     : uuid:42551ad1-c9b9-4a8b-a0d0-785c417f66cc
Page Count                      : 3

EXIF Metadata provided by EXIF.tools