Abocom Systems UFE1KB Ethernet Adapter User Manual page
Abocom Systems Inc Ethernet Adapter page
Contents
- 1. users manual 1
- 2. users manual 2
users manual 1
USB 1 0/1 DOM FAST ETHERNET llsar Guide M73-AP008-050 JNSTTiti . ONs- MANUAL - , FEDERALCOMMUNICATIONS COMMISSION ' INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against han'nful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmfiil interference to radio or television reception; which can be determined by turning the equipment oil” and on, the user is encouraged to try to correct the interference by one or more of the following measures: »- Reorient or relocate the receiving antenna. »- Increase the separation between the equipment and receiver. -- Connect the euipment into an outlet on a circuir different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help, CAUTION: To assure continued FCC compliance: (1) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the euipment. FCC Label Compliance Statement: This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. INTRODUCTIONS The USB 10/ IOOM Fast Ethernet Adapter provides outside-the-box plug-and-play local area network connections for USE-enabled PCs, notebooks and laptops. This adapter uses a B type USB port to connect with the USB host, and an M45 port to connect with a 10/100 Fast Ethernet LAN link. Installation is easy and no external power is required! The network sharing is easier than ever. System Requirements - A PentiumG’ processor-based personal computer 166MMX or above. - At least 16 MB ofRAM. ' One USB port. ' Microsoft Windows 98. Specifications Network standard . IEEE 802.3 for lOBaseT - IEEE 802.3u for lOOBaseTX Data Rate - 10/100 Mbpsl ' Double data transfer rate in full duplex mode Supported operating systems ' Windows 98 Physical - Ports: 1 RJ-45, 1 USB B-Type - LED indicators: Link, Transmit/Receive ' Dimensions: 2.7”x 2” x 1” (LxWxH) 1 CATS cable is required for 100M data hansfer rate Parts Names and Functions (D USB Connection Cable: connects the USB host port with the USB 10/100M Fast Ethemot Adapter. connecmoflytlSIhoflm @ <2) USB-B Port: USB device port. G) USB Fast Ethernet Adapter © Rx/Tx LED indicator: WM Ethernet Adapter is tranm (5) Link LED indicator: glows Network is linked; when :_ ” Network is linked. © Network Port: connects the Fast totheHUBwiflitheLANcable.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 2001:01:02 09:38:45-05:00 Create Date : 2001:01:02 09:38:18-05:00 Title : page) Author : Max Creator : Print 00AH031 Producer : Acrobat PDFWriter 4.0 for Windows Page Count : 4EXIF Metadata provided by EXIF.tools