Abocom Systems UFE1KB Ethernet Adapter User Manual page

Abocom Systems Inc Ethernet Adapter page

Contents

users manual 2

Download: Abocom Systems UFE1KB Ethernet Adapter User Manual page
Mirror Download [FCC.gov]Abocom Systems UFE1KB Ethernet Adapter User Manual page
Document ID131122
Application ID1J+PVYu3ux/hAAwDoEFmjA==
Document Descriptionusers manual 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize240.14kB (3001747 bits)
Date Submitted2001-01-02 00:00:00
Date Available2000-12-26 00:00:00
Creation Date2001-01-02 09:36:55
Producing SoftwareAcrobat PDFWriter 4.0 for Windows
Document Lastmod2001-01-02 09:37:25
Document Titlepage)
Document CreatorPrint 00AH031
Document Author: Max

lNSTALLATION
Precaution
Before the installation, make sure the USB port exists
in your computer and is enabled. To check this, go to
My Computer9Control Pane19System. Open the
Device Manager tab. If the Universal Serial Bus
controller device is found, it means your USB port is
installed and enabled. If not, either no USB port is
installed or the USB bios is not properly enabled. In
this case, consult your computer dealer for USB
support.
MDMM-P”
5mm
It“ mflADIEB PU to USB wnucm ‘
US! Hod Nth
Getting Hooked Up
1.Locate the USB host port of your system. Align the
USB connector toward the USB host poxt, push
evenly and steadily until it is seated.
2. Connect another end of the USB connection cable
to the device port (USB B) of your USB 10/100M
Fast Ethernet Adapter until it Flicks.
3.Connect the UTP cable to the Fast Ethernet
Adapter.
4. Connect the other end to a Hub.
5. Windows 98 will automatically detect the new
hardware device. Perform the following procedures
for installing the device driver.
w Hunlwnv VA
l.Insert the device driver disk into your floppy drive.
When the above figure appears, click Next.
2. The installation program will proceed
automatically. Follow the on-screen instruction to
finish.
3. When Windows prompts you to restart your
computer, click No to make some changes to your
network settings.
4. Go to the Start menu. Point to Settings. Click
Control Panel. Double-click Network.
(Ian! la Mieroodl New:
USE 101mm Fm: Elfnmsl
5. When the Network dialog box appears, select USB
10/100 Fast Ethernet and click Add. Set the
appropriate protocols and client for you needs.
When completed, click OK.
6. Remember to restart your computer to activate the
new device .
Setup Diagnostlcs
You can perform the following steops to check if this
USB 10/ IOOM Fast Ethernet Adapter is well
installed.
1. Go to Desktop.
2. Right-click My Computer.
3. Click Properties.
4. Open the Device Manager tab‘
5. Click the plus sign “+”.
If the 10/100 USB Network Adapter appears as
illustrated below, it means your 10/ 100 Fast Ethernet
. Adapter is well installed. If otherwise or a question
mark “?” is found next to it, then the 10/ 100 Fast
Ethernet Adapter is not properly installed.
a» meMlLP‘l]
5 5mm
Uriv-wuidhnmnlu

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:01:02 09:37:25-05:00
Create Date                     : 2001:01:02 09:36:55-05:00
Title                           : page)
Author                          : Max
Creator                         : Print 00AH031
Producer                        : Acrobat PDFWriter 4.0 for Windows
Page Count                      : 5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MQ4UFE1KB

Navigation menu