Abocom Systems VM311R01 60GHz Wireless HD Sink Module User Manual

Abocom Systems Inc 60GHz Wireless HD Sink Module

user manual

Download: Abocom Systems VM311R01 60GHz Wireless HD Sink Module User Manual
Mirror Download [FCC.gov]Abocom Systems VM311R01 60GHz Wireless HD Sink Module User Manual
Document ID1345241
Application IDjkkgQYEb39xxf7fMZEVogw==
Document Descriptionuser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.3kB (341275 bits)
Date Submitted2010-09-17 00:00:00
Date Available2011-03-16 00:00:00
Creation Date2010-09-17 14:11:19
Producing SoftwareAcrobat Distiller 8.1.0 (Windows)
Document Lastmod2010-09-17 16:57:12
Document TitleMicrosoft Word - Abocom_VM311R_User_Manual_2010-0918.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: USER

Draft Version
AboCom System, Inc.
Product Manual
VM311R
60GHz Gen2 WirelessHD Receiver Module
Release 0.3
Date:
Sep. 18, 2010
Author:
Wayne Tseng
Reviewer
AboCom systems, Inc.
CD Kuo
Proprietary & Confidential Information
Specifications are subject to change without notice
Draft Version
Table of Contents
1.0
REVISION HISTORY............................................................................................................................. 3
2.0
RELATED DOCUMENTS....................................................................................................................... 3
3.0
INTRODUCTION.................................................................................................................................. 4
4.0
FEATURES ........................................................................................................................................... 4
5.0 SPECIFICATION ......................................................................................................................................... 6
5.1. HARDWARE SPECIFICATIONS ....................................................................................................................... 6
5.2 RF SPECIFICATIONS .................................................................................................................................... 7
6.0 PHYSICAL SPECIFICATIONS ...................................................................................................................... 8
6.1 ENCLOSURE SPECIFICATIONS ........................................................................................................................ 8
6.1.1 PROPOSED FRONT PANEL AND SIDE CONFIGURATION:..................................................................................... 8
6.1.2 PROPOSED REAR PANEL CONFIGURATION:.................................................................................................... 8
6.2 POWER SUPPLY ......................................................................................................................................... 8
7.0 MECHANICAL DESIGNS ............................................................................................................................ 8
8.0 NECESSARY APPROVALS .......................................................................................................................... 9
8.1 MAJOR APPROVALS .................................................................................................................................... 9
AboCom systems, Inc.
Proprietary & Confidential Information
Specifications are subject to change without notice
Draft Version
1.0 Revision History
Date
Apr. 22, 2010
Jun. 8,2010
Sep. 18,2010
Release
0.1
0.2
0.3
Author
Sandy Chen
Wayne Tseng
Wayne Tseng
Description
Draft version
Modification for FCC submission
Modification for IC & FCC module submission
2.0 Related Documents
Date
Author
AboCom systems, Inc.
Document
Proprietary & Confidential Information
Specifications are subject to change without notice
Draft Version
3.0 Introduction
For coming huge flat TV Screen and high definition resolution, user like to set up the AV system in living
room, but the cable placement always be a great harassment to the interior of beautiful house. Also the
HDMI cable is as expensive as the length as be. Users deserve to have a wireless cable replacement to
match their high class AV systems. Here shows up a high edge solution to meet users’ equipment:
60GHz wirelessHD Audio-Video Adapters, VM311R. This elegant and practical product has HDMI
interface to take multiple content sources like multimedia center, Blue ray player and Set-Top Box,
without compression of content, the WirelessHD technology will offer multiple gigabit throughout for
FullHD video transmission. Users do not need to sacrifice video quality for lower transmission
bandwidth anymore. VM311R also has compliance to WirelessHD, HDMI and DTCP for content security
and quality assurance.
4.0 Features
Input
HDMI X 1
WIRELESS
Frequency: 60GHz
Video Format
Video Format Vertical Refresh
Color Space Sampling
Bits/Pixel
480i
59.94/60Hz
YCbCr
04:02:02
04:04:04
24/30/36‐bits
224/30/36‐bits
59.94/60Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
50Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
04:04:04
04:02:02
04:04:04
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
224/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
224/30/36‐bits
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
480p
576i
576p
50Hz
720p
50Hz
RGB
YCbCr
YCbCr
RGB
YCbCr
59.94/60Hz
RGB
YCbCr
AboCom systems, Inc.
Proprietary & Confidential Information
Specifications are subject to change without notice
Draft Version
50Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
59.94/60Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
23.976/24Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
50Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24/30/36‐bits
24‐bits
24‐bits
59.94/60Hz
RGB
YCbCr
04:04:04
04:02:02
04:04:04
24‐bits
24‐bits
24‐bits
RGB
RGB
RGB
RGB
RGB
RGB
RGB
04:04:04
04:04:04
04:04:04
04:04:04
04:04:04
04:04:04
04:04:04
24‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24/30/36‐bits
24‐bits
1080i
1080p
VGA
WVGA
SVGA
XGA
SXGA
WSXGA+
60Hz
60Hz
60Hz
60Hz
60Hz
60Hz
Specification subject to change without notice, Sibeam may change the features.
Audio Format
Audio up to 8‐ch., 24‐bit 192 kHz LPCM, surround sound audio (6/8‐ch. PCM, Dolby Digital, DTS)
Audio Sample Rate, F's
Multiples of Fs
2/6/8‐channels
2‐channel
128
256
384
32 kHz
4.096
8.192
12.288
44.1 kHz
5.645
11.29
16.934
48 kHz
6.144
12.288
18.432
88.2 kHz
11.29
22.579
33.864
96 kHz
12.288
24.576
36.864
512
16.384
22.579
24.576
45.158
49.152
176.4 kHz 192 kHz
22.579
24.576
45.158
49.152
Specification subject to change without notice, Sibeam may change the features.
Dolby and DTS supported in SDK 2.6.0
AboCom systems, Inc.
Proprietary & Confidential Information
Specifications are subject to change without notice
Draft Version
5.0 Specification
‐‐ The column of “Designer Input “is for PM/RD of Product House to fill in, according to its product definition
‐‐ The column of “FCS options” is for PM to fill in, according to marketing requirements
‐‐ The column of “Note” is for adding comments or clarifications on each feature listed
‐‐ Besides specific descriptions, the usable comments for “Designer Input” and “FCS options” are listed as below
1. “Y” means YES, which this product applies and supports such a feature before FCS
2. “TBD” means “To Be Discussed”, which it’s negotiable to support a feature before FCS.
3. “FR” means “Future Released”, which a feature will be supported AFTER FCS.
4. “TBC” means “To Be Checked”, which is NOT CLEAR if this feature is or will be supported before FCS.
5. “N” means NO, which this product will NOT support a feature now or future
6. “N/A” means this feature is not applicable, or not necessarily defined for this product.
5.1. Hardware Specifications
VM311T
1. Hardware Features
1.1
1.2
1.3
Primary Processor
Designer
Input
Processors
AT91SAM7S256MU
Memory
SRAM
FLASH
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
1.4
HDMI
1.5.
WirelessHD 60GHz
Range
1.6.
Power Consumption
Note
64KB
256KB
Operating Environment
0 OC to 40 OC
‐30 OC to 70 OC
10% to 90%
Non‐Condensing
5% to 90%
Non‐Condensing
AV Port
1 Port
Wireless
32 Antenna Array
10 meter NLOS
Power
TBD W(Max/Typ)
HDMI v1.4 (3D)
Ceramic package
Target
Draft Version
5.2 RF Specifications
TX
1. RF Designs
1.1.
Designer
Input
Note
Antenna Designs
Antenna
Antenna Type
32 Antenna Array
Integrate Ceramic
1.2.
LRP Radiated Power(EIRP)
Maximum 21dBm (Max)
1.3
LRP Transmite Antenna Gain
Maximum 13dBi (Max)
1.4
LRP Radiated Power(EIRP)
Maximum 27dBm (Max)
1.5
HRP Transmite Antenna Gain
Maximum 17dBi (Max)
RX
1. RF Designs
1.1.
1.2.
1.3
Designer
Input
Antenna Designs
Antenna
Antenna Type
LRP Radiated Power(EIRP)
LRP Transmite Antenna Gain
32 Antenna Array
Integrate Ceramic
Maximum 21dBm (Max)
Maximum 13dBi (Max)
Receive Sensitivity
Maximum ‐69dBm (Max)
Note
Full rate
Draft Version
6.0 Physical Specifications
TBD
6.1 Enclosure Specifications
Please refer to above page.
6.1.1 Proposed front panel and side configuration:
One LED display
6.1.2 Proposed rear panel configuration:
Power Jack, HDMI interface
6.2 Power Supply
External Power adapter:Input AC 100 – 240V @60Hz; Output 5V 2A
7.0 Mechanical Designs
TBD
Draft Version
8.0 Necessary Approvals
8.1 Major approvals
Status
Regulations
Regions
Standard
Safety
North America
UL + CUL
(Yes, No, or TBD)
No
International
CB IEC 60950-1, 60065
No
European Union
LVD EN 60950-1, 60065
Yes
others
TBD
No
USA
FCC Part15B Class B
Yes
Canada
ICES-003
Yes
European Union
CE EN 301 489-1, 301 489-3
Yes
Japan
VCCI Class B
No
Korea
MIC
No
others
TBD
No
EMF
European Union
CE EN62311
Yes
RF
USA
FCC Part15C
Yes
Canada
IC RSS 210
European Union
CE EN 302 567
EMC
Able to convert from
FCC
Yes
Specified low-power radio equipment
Japan
Item 8 of Article 2 Paragraph 1
Yes
of Certification Ordinance
Others
Others
TBD
No
International
HDMI v1.3
Yes
International
WiHD CTS v1.0
Yes
Draft Version
FCC module Statement:
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC
compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the
host this module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for
an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the FCC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly approved by
the manufacturer could void the user's authority to operate this equipment. If the size of the end product is
smaller than 8x10cm, then additional FCC part 15.19 statement is required to be available in the users
manual: This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID:
MQ4-VM311R01 ". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19
statement has to also be available on the label: This device complies with Part 15 of FCC rules. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
IC module Statement:
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the
host this module is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set
forth for an population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm
separation with the antenna while this end product is installed and operated. The end user has to be
informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be satisfied.
The end user has to also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment. IC statement is required to be
available in the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation
is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX IC : 2826B–
VM311R01 ".
10
Draft Version
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
IC Statement
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm between the
radiator & your body.
11

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:09:17 16:57:12+08:00
Create Date                     : 2010:09:17 14:11:19+08:00
Metadata Date                   : 2010:09:17 16:57:12+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Abocom_VM311R_User_Manual_2010-0918.doc
Creator                         : USER
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Document ID                     : uuid:177b2720-e69e-4125-b994-f288af3198bd
Instance ID                     : uuid:e0e5aea9-97e8-4a1b-9dc4-8c5da36cb060
Page Count                      : 11
Author                          : USER
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MQ4-VM311R01

Navigation menu