Accton Technology HWG6507CAM WaltzOne All-in-One IP Cam User Manual Waltzone QSG R01 safety
Accton Technology Corp WaltzOne All-in-One IP Cam Waltzone QSG R01 safety
Users Manual
WaltzOne HWG6507 Connect the AC adapter to the WaltzOne and to an AC outlet. Remove the base of the WaltzOne to access the ports, buttons, and DC jack. All-in-One Home Security Camera/Gateway Quick Start Guide WPS button RJ-45 port Connect to your home Internet router. Wireless: To connect the WaltzOne using a Wi-Fi connection, press the WPS button on the base of the unit, and then within two minutes, press the WPS button on your Internet router. Monitor your home or office from anywhere using any iOS or Android smartphone or tablet. What’s in the box? WaltzOne Ethernet Cable AC Adapter Place the WaltzOne on a flat surface with a clear view of the area you want to monitor. This Guide Unique identification QR code. Note: For detailed information on WaltzOne installation and other features, refer to the User Guide on the website. E042016-CS-R01 (Optional) Wired LAN: Use Ethernet cable to connect the WaltzOne RJ-45 port to your home Internet router. 15020000XXXXA R01 Note: The WaltzOne also automatically pairs with your other home security door and window sensors. WPS < 2 minutes WPS From your smartphone or tablet, download the WaltzOne App from Google Play or Apple iTunes. 5 Add the WaltzOne by touching “+” and then “Add”. Scan the identifcation QR code supplied with the device. When the WaltzOne is initialized and connected, enter your own 6-digit access code to become “owner” of the device. AccessCode AF34014252’s access code is factory default. Please enter a new one CANCEL From the device list, touch the WaltzOne entry to access its control screen and view the live camera display. OK Note: Be sure to keep a record of your access code in a safe place. Register an account for the WaltzOne. An account allows you to manage a number of devices from different smartphones or tablets. Touch “Sign In” on the app menu. User Sign In User Register Quick-access icons for camera snapshot, motion sensor, and other sensors. Touch the camera image to view a full-screen display. Name Name Password Email Sign In Forget password? Manage all the WaltzOne features from the control screen. Refer to the User Guide for detailed information. No account yet? Register one Register Technical Specification FCC Statement Image Layout Fisheye Len, Glass type View Angle: H 165/ V90 degrees F=2.0 Video Compression H.264/Motion JPEG ( MJPEG) Resolution: 720 p (25 fps), 360 p (15 fps) Audio Compression 2-way audio Built-in omni directional microphone Built-in 2 Watts speaker Siren 85 db @ 3 m Ethernet IEEE 802.3 10/100 BASE-T RJ-45 Connector WiFi 802.11 b/g/n @2.4GHz (2412~2462MHz Ch1~Ch11) MIMO 2X2 WPS ZigBee IEEE 802.15.4 ZigBee @ 2.4GHz (2405~2475MHz) Coordinator HA 1.2 or later version AES 128 bits encryption Built-in Sensors PIR Sensor (5 m detection range) Temperature Sensor Humidity Sensor I/O Port Top push button with Multicolor status RGB LED SDHC slot RJ-45 connector 3 buttons inside: RESET, WPS, and Sensor pairing DC Jack Power AC Input: 100~240 VAC @ 50~60 Hz DC Output: 5 V/2 A Cable 3M length Mechanical Size: 76.5 (D) * 132.5 (H) mm Weight: 220 g Temperature Operating: 0°C ~ 45°C (32°F ~ 113°F) Storage: -10°C to 50°C (14°F to 122°F) Humidity 5% to 85% Non-Condensing Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: t Reorient or relocate the receiving antenna. t Increase the separation between the equipment and receiver. t Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. t Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Producer : GPL Ghostscript 9.16 Modify Date : 2016:05:12 11:45:48+08:00 Create Date : 2016:04:28 17:21:31+08:00 Creator Tool : Adobe Acrobat 11.0.0 Metadata Date : 2016:05:12 11:45:48+08:00 Document ID : uuid:17d448f0-0f7e-11e6-0000-5a10cfddafce Instance ID : uuid:dfebe9bb-7b9a-4f0a-a26f-13fbe7e55e94 Format : application/pdf Title : Waltzone QSG R01-safety.pdf Creator : edward_chou Page Count : 3 Author : edward_chouEXIF Metadata provided by EXIF.tools