Accton Wireless Broand FWA81US25005W Mobile WiMAX USB Adapter User Manual US211 3 5 81 UG R01

Download:
Mirror Download [FCC.gov]
Document ID	1252993
Application ID	jxi8oeT2Ldx39+VwGYVeeA==
Document Description	User Manual 2
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	120.07kB (1500904 bits)
Date Submitted	2010-03-16 00:00:00
Date Available	2010-03-17 00:00:00
Creation Date	2009-07-24 09:00:56
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2009-11-26 18:01:13
Document Title	US211-3.5-81 UG R01.book
Document Creator	FrameMaker 9.0
Document Author:	angel_peng

ADMINISTRATOR MODE
The WiMAX USB Adapter has an Administrator Mode for configuring profiles
and accessing the Advanced Configuration settings.
Administrator Mode is intended for qualified service personnel only.
ACCESSING ADMINISTRATOR MODE
Administrator Mode is accessed through the key sequence “Alt + t,” which
prompts for a password.
The password for Administrator Mode is “wimax123” (case sensitive).
Figure 30: WCM Change Mode
Once in Administrator Mode, the user can create, edit, and delete profiles,
configure authentication settings, and access the Advance Configuration
screen.
Using the key sequence “Alt + t” a second time exits Administrator Mode.
– 30 –
CHAPTER 4 | Administrator Mode
Setting Profiles
Figure 31: Administrator Mode
SETTING PROFILES
The WCM profiles allow a user to set their specific details for connecting to
various WiMAX networks. The WCM utility must have at least one profile
configured and set as the Default Profile” to be able to connect to a WiMAX
service.
The WCM allows up to ten profiles to be configured. You can create, edit,
and delete profiles in the list. One profile must be set as the “Default
Profile.”
– 31 –
CHAPTER 4 | Administrator Mode
Setting Profiles
Figure 32: Setting Profiles
CREATING A NEW Clicking the Create button on the Profile screen displays the Create Profile
PROFILE window.
Figure 33: Create Profile Screen - General Tab
– 32 –
CHAPTER 4 | Administrator Mode
Setting Profiles
The General tab on this screen displays the following items:
Profile Name — A name used to identify the new profile (up to 20
characters).
Select Service Provider — The ID number and name of the WiMAX
network operator for this profile. You can click the Add button to add other
operator names and IDs.
Figure 34: Add Operator
Operator Restriction — When set to “Home Operator,” the user can only
connect to the service provider specified in the profile. When set to “No
Operator Restriction,” the operator specified in the profile is used when the
network is detected, otherwise the user can roam to other networks.
Connection Mode — When set to “Auto Connection” the utility will use the
profile settings to automatically scan and connect to a WiMAX network.
Power Save Mode — To save power, the card can operate in one of three
modes:
◆
High: The card will go to sleep and idle whenever it can.
◆
Medium: The card will go to sleep and idle only after a predefined
time.
◆
Application Optimized: The card will go to sleep and idle only when
the PC operating system allows it.
Save as Default Profile — Saves the profiles settings and sets it as the
default.
Clicking the Scan tab on the Add Profile screen displays the profile
frequency and bandwidth settings.
– 33 –
CHAPTER 4 | Administrator Mode
Setting Profiles
Figure 35: Create Profile Screen - Scan Tab
The Scan tab on the Add Profile screen displays the following items:
Frequency — Specifies a center frequency to scan.
Bandwidth — Specifies the bandwidth of the channel; 5, 7, 8.75, or
10 MHz.
Clicking the Authentication tab on the Add Profile screen displays the user
authentication settings.
– 34 –
CHAPTER 4 | Administrator Mode
Setting Profiles
Figure 36: Create Profile Screen - TTLS Authentication
The Authentication tab on the Add Profile screen displays the following
items:
Enable Authentication — Enables user authentication for connection to
the network.
EAP Method — Selects the Extensible Authentication Protocol (EAP)
method to use for authentication. When EAP-TTLS or EAP-TLS is selected,
the appropriate parameters need to be configured.
◆
EAP-TTLS-MSCHAPV2 — Tunneled Transport Layer Security with
Microsoft’s version 2 of CHAP (Challenge-Handshake Authentication
Protocol). This security method provides for certificate-based, mutual
authentication of the client and network through an encrypted channel.
Unlike EAP-TLS, EAP-TTLS requires only server-side certificates. The
MS-CHAP protocol requires a user name and password to be
configured. The user name and password can be up to 50 characters.
(The following characters are not permitted; /\|”?@#$%^&*():;<>,.)
◆
EAP-TLS — Transport Layer Security. Provides for certificate-based and
mutual authentication of the client and the network. It relies on clientside and server-side certificates to perform authentication and can be
used to dynamically generate user-based and session-based encryption
keys to secure subsequent communications between the user and the
network.
– 35 –
CHAPTER 4 | Administrator Mode
Setting Profiles
Outer Identity — The Network Access Identifier (NAI) text string that is
used to identify the home authentication realm for device authentication
during roaming. The NAI string (defined in RFC 4282) is used to proxy an
authentication request to another remote server. The authentication is then
performed using the unique X.509 authentication certificate included with
the device. The string can be defined by three methods:
◆
MAC: Uses the device MAC address as part of the identity.
◆
RANDOM: Uses a generated random number of 26 hexadecimal digits.
◆
CUSTOMIZE: Allows the whole string to be defined as required.
Trust CA Certificate — The security certificate issued by a recognized
certification authority (CA) that is used for mutual authentication with the
authentication server when EAP-TLS is used. The browse button can be
used to locate the file on the host PC.
Certificate in EEPROM — Indicates if the device certificate, key, and
password is included in memory on the device. If the certificate files are
not in EEPROM, they can be located or specified using the following fields.
◆
Client Certificate — The name of the file on the host PC that contains
the device security certificate. The browse button can be used to locate
the file.
◆
Client Private Key — The name of the file on the host PC that contains
the encryption key for use with the security certificate.
◆
Client Private Key Password — The required password for the
private key.
User name — A text string used by EAP-TTLS-MSCHAPV2 to identify the
user to the authentication server.
Password — The password used by EAP-TTLS-MSCHAPV2 to confirm the
identity of the user to the authentication server.
– 36 –
CHAPTER 4 | Administrator Mode
Advanced Configuration
Figure 37: Create Profile Screen - TLS Authentication
ADVANCED CONFIGURATION
The Advanced Configuration screen allows you to configure extended
features for the WiMAX connection.
Figure 38: Advanced Configuration
– 37 –
CHAPTER 4 | Administrator Mode
Advanced Configuration
The displayed items on this screen can be described as follows:
Center Frequency — Displays the center frequency used by the WiMAX
service.
Bandwidth — Displays the channel bandwidth.
Customize — Displays a value used for compatibility with different base
stations.
Radio Parameter — Selects the supported WiMAX radio band.
PKMv2 Enable — PKMv2 (Privacy Key Management version 2) is the
standard security solution for WiMAX networks. The security protocol
provides mutual authentication of the subscriber station and base station,
as well as distributing traffic encryption keys. It is also used to transport
EAP (Extensible Authentication Protocol) messages.
ARQ Enable — The ARQ (Automatic Repeat reQuest) mechanism is an
optional part of the WiMAX MAC layer and a protocol for error control in
data transmission. When a packet error is detected, the transmitter is
automatically requested to resend the packet.
Idle Mode Enable — Idle mode enables power savings for the WiMAX
adapter. The feature can turn off the MS and not be registered with any
base station, and yet receive downlink broadcast traffic.
Invert MSK — Inverts the Master Session Key used in the EAP process.
Handoff Enable — Enable handoffs when moving between base stations.
Auto Sync Up — Enable automatic synchronization with the base station
signal.
Auto Linkup by Firmware — Enable automatic connection to the base
station.
– 38 –
A
TROUBLESHOOTING
DIAGNOSING LED INDICATORS
Table 2: LED Indicators
LED Status
Probable Cause
Action
Blue LED is Off
The USB adapter is not
receiving power
◆
Remove the USB adapter and reinsert it in
the slot. Be sure the card is securely seated
in the port.
◆
Try the USB adapter in another USB port. If
this also fails, test your PC with another
USB adapter that is known to operate
correctly.
◆
Check the USB adapter and port connectors
for any physical damage.
◆
Try the USB adapter in another PC’s port that
is known to operate correctly.
◆
If you cannot resolve the problem, contact
your local dealer for assistance.
◆
Verify the area covered by your WiMAX
service provider.
◆
Move to another location within the WiMAX
service area.
Green/Orange
LED is Off
The USB adapter
cannot detect a WiMAX
base station
NETWORK CONNECTION PROBLEMS
If you cannot access the Internet from the PC, check the following:
◆
Make sure the WCM software and driver is correctly installed on your
system. If necessary, try uninstalling and reinstalling the software.
◆
If you cannot access the Internet, be sure your Windows system is
correctly configured for TCP/IP. The IP settings should be set to “obtain
an IP address automatically.”
◆
You may have moved out of the service area of the WiMAX network.
The WCM main screen should indicate that there is no connection. Call
the service provider for service coverage information.
◆
The service provider’s profile may not be configured correctly. Check
that the Authentication Mode settings are correct.
– 39 –
APPENDIX A | Troubleshooting
Uninstalling the WCM Software
◆
If you cannot resolve the problem, check the error logs from the WCM
Status screen and contact your service provider.
UNINSTALLING THE WCM SOFTWARE
If you are having problems with the WiMAX USB Adapter or the WCM
software, you may need to uninstall the USB adapter driver and software
from the Windows system.
Follow these steps:
1. From the Windows Start menu, go to the WCM software entry.
2. Click the Uninstall WCM option on the menu.
Figure 39: Uninstall WCM
WCM unistall option on the
Window Start menu
3. Click the OK button to confirm the uninstall process.
Figure 40: Confirm Uninstall
– 40 –
APPENDIX A | Troubleshooting
Uninstalling the WCM Software
4. When the uninstall is complete, click Finish to exit.
Figure 41: Uninstall Complete
– 41 –
B
SPECIFICATIONS
HOST INTERFACE USB 2.0 specification
STANDARD COMPLIANT IEEE 802.16e-2005 Wave 2
AIR INTERFACE Scaleable OFDMA
DUPLEX MODE TDD/5ms frame
ANTENNA iMAT
Transmit: Single antenna
Receive: Two antennas using Maximal-Ratio Combining (MRC)
Gain: 2 dBi
Pattern: Omnidirectional
Impedance: 50 Ohm
POWER CONSUMPTION 2.4 W maximum
PHYSICAL SIZE 25 x 89 x 16 mm (0.98 x 3.50 x 0.62 in.)
WEIGHT 23 g (0.81 oz)
OPERATING FREQUENCY
Frequency Band
CE
FCC
2.3G
NCC
2305-2320
2345-2360
2.5G
2500-2690
2496-2690
3.5G
3400-3600
3650-3700
– 42 –
2500-2690
APPENDIX B | Specifications
BANDWIDTH
ALLOCATION
Bandwidth
Allocation
2.3G
2.5G
3.5G
8.75 MHz
5 MHz
10 MHz
5 MHz
7 MHz
10 MHz
3.5 GHZ MODEL: 5,7, PRBS subcarrier randomization
AND 10 MHZ Contains pilot, preamble, and ranging modulation
MODULATION SCHEME
MODULATION AND Down Link
CODING TYPES QPSK 1/2 CTC
QPSK 3/4 CTC
16 QAM 1/2 CTC
16 QAM 3/4 CTC
64 QAM 1/2 CTC
64 QAM 2/3 CTC
64 QAM 3/4 CTC
64 QAM 5/6 CTC
Up Link
QPSK 1/2 CTC
QPSK 3/4 CTC
16 QAM 1/2 CTC
16 QAM 3/4 CTC
MAXIMUM THROUGHPUT Downlink Peak Rate: > 20 Mbps
Uplink Peak Rate: > 7 Mbps
TRANSMIT POWER Maximum Power class less than +23 dBm
RECEIVE SENSITIVITY QPSK 1/2 CTC: -94 dBm
16-QAM 3/4 CTC: -85 dBm
64-QAM 3/4 CTC: -75 dBm
SECURITY/ENCRYPTION PKMv2 with 128 bit AES/CCM, EAP-TLS, EAP-TTLS
QOS MECHANISM Dynamic Service Flow Creation, Change, Deletion
Scheduling: UGS, RT-VR, NRT-VR, ERT-VR and BE
– 43 –
APPENDIX B | Specifications
OPERATING Operating: 0 °C to 40 °C (32 to 113 °F)
TEMPERATURE
HUMIDITY Operation: 10% to 90% (non-condensing)
Maximum Storage: 90%
EMMISSIONS FCC 47 CFR Part 15 Class B
COMPLIANCE EN 55022 class B
EN 301 489-1/-4
SAFETY EN60950-1
CNS14336
RADIO SIGNAL US: 2.3 GHz - CFR 47 Part 27D; 2.5 GHz - CFR 47 Part 27M
CERTIFICATION Europe (3.5GHz): EN 302 326-1/-2/-3
SPECIFIC ABSORPTION US: Part 2.1093
RATE (SAR) Europe: EN62311
SOFTWARE DRIVERS Windows XP SP2,Windows Vista and Windows 7
NDIS 5.0 PnP ETH 802.3 device driver specification
WHQL certified
LED
Status
Description
Power
On Blue
The USB adapter is correctly installed in a USB
port and is receiving power.
Link/Activity
On Green
The USB adapter is searching for a WiMAX base
station.
On Orange
The USB adapter has an established link with a
base station and is transmitting or receiving data.
– 44 –
GLOSSARY
AUTHENTICATION The process to verify the identity of a subscriber requesting network
access.
BANDWIDTH The difference between the highest and lowest frequencies available for
network signals. Also synonymous with network speed, the actual speed of
data transmission through a medium.
BASE STATION A WIMAX service provider’s equipment that is installed at a fixed location
to provide network connectivity for subscriber stations within a defined
service area.
CINR Carrier-to-Interference-Plus-Noise-Ration: A measurement of the channel
quality in a WiMAX link. Subscriber stations measure the received CINR
and send the information back to the base station. The base station can
then adjust modulation and coding for the link to optimize throughput.
CENTER FREQUENCY The radio frequency at the center of a WiMAX channel. WiMAX channels
can be of different widths (the channel bandwidth) and the transmitted
radio signal is spread across the full width of the channel.
CHANNEL BANDWIDTH The range of frequencies occupied by a WiMAX radio signal. The amount of
information that can be transmitted in a radio signal is related to the
channel bandwidth, which is measured in Megahertz (MHz). WiMAX
supports a range of channel bandwidths that can be defined by the service
operator depending on performance requirements, operating preferences,
and regulatory constraints.
CPE Customer-Premises Equipment: Terminal equipment provided by a service
provider that is located at a subscriber’s premises and supports a
communication channel between a customer and the service provider.
CPU Central Processing Unit: The CPU, or processor, is the part of a computer
where most calculations take place. In most of today’s PCs, the CPU is
contained on a single chip. The type and speed (in GHz) of a CPU largely
defines the processing power of a computer.
– 45 –
GLOSSARY
DNS Domain Name System: A system used for translating host names for
network nodes into IP addresses.
DHCP Dynamic Host Configuration Protocol: Provides a framework for passing
configuration information to hosts on a TCP/IP network. DHCP is based on
the Bootstrap Protocol (BOOTP), adding the capability of automatic
allocation of reusable network addresses and additional configuration
options.
ENCRYPTION Data passing between a base station and subscribers uses encryption to
protect from interception and evesdropping.
EAP Extensible Authentication Protocol: An authentication protocol used to
authenticate subscribers. EAP is used with TLS or TTLS authentication to
provide “mutual authentication” between a subscriber and a WiMAX
network.
IEEE 802.16E The WiMAX standard that provides mobile broadband wireless access using
Scalable Orthogonal Frequency Division Multiple Access (SOFDMA).
INTERNET SERVICE A company that offers an access service that connects customers to the
PROVIDER Internet.
IP ADDRESS The Internet Protocol (IP) address is a numerical identification assigned to
a device that communicates in a network using the Internet Protocol.
LED Light Emitting Diode: Used for indicating a device or network condition.
LAN Local Area Network: A group of interconnected computers and support
devices.
MAC ADDRESS The physical layer address used to uniquely identify network nodes.
MS-CHAPV2 Microsoft’s version 2 of the Challenge-Handshake Authentication Protocol.
Introduced by Microsoft with Windows 2000, MS-CHAPV2 (defined in RFC
2759) provides mutual authentication between peers using user names
and passwords.
NETWORK ADAPTER A hardware device that enables a computer to communicate over a
network. The adapter provides physical access to a particular networking
medium.
– 46 –
GLOSSARY
RAM Random Access Memory: The memory in a computer where the operating
system, application programs, and other data currently in use are stored.
RAM is volatile memory where data is lost when the computer is turned off.
Having more RAM in a computer reduces the time the processor takes to
read data, which increases overall computer performance.
RSSI Receive Signal Strength Indicator: A measurement of the strength of a
received wireless signal. The higher the RSSI value, the stronger the
received signal from the antenna.
ROAMING The process where a WiMAX subscriber can move onto another operator’s
network while maintaining a continuous connection.
RSSI See Receive Signal Strength Indicator.
SOFDMA Scalable Orthogonal Frequency Division Multiple Access: The air interface
defined for mobile WiMAX. SOFDMA is a multiple access method that allows
simultaneous transmissions to and from several users, employing a
subchannel structure that scales with bandwidth.
SERVICE PROVIDER See Internet Service Provider.
SIM Subscriber Identity Module: A standard for a small removable integrated
circuit card that securely stores information used to identify a mobile
wireless subscriber.
SUBSCRIBER STATION A general term for a customer’s terminal equipment that provides
connectivity with a WIMAX network.
TCP/IP Transmission Control Protocol/Internet Protocol: Protocol suite that
includes TCP as the primary transport protocol, and IP as the network layer
protocol.
TLS Transport Layer Security: An standard defined in RFC 5216, EAP-TLS is an
authentication protocol that provides strong security through the use of
client-side certificates.
TTLS Tunneled Transport Layer Security: EAP-TTLS is a protocol extension of
EAP-TLS. The authentication server is authenticated to the client using its
Certification Authority certificate, this establishes a secure “tunnel”
through which the client is then authenticated.
– 47 –
GLOSSARY
USIM Universal Subscriber Identity Module: See Subscriber Identity Module.
URL Uniform Resource Locator: An easy-to-read character string that is used to
represent a resource available on the Internet. For example, “http://
www.url-example.com/.”
WIMAX The IEEE 802.16 standard for Worldwide Interoperability for Microwave
Access. The IEEE 802.16-2004 standard, known as “fixed WiMAX,”
supports only point-to-point links and has no support for mobility. The IEEE
802.16e-2005 standard, known as “mobile WiMAX,” is an amendment to
IEEE 802.16-2004 and supports mobility. Note that mobile WiMAX standard
is not backward compatible with the fixed WiMAX standard.
– 48 –
INDEX
NUMERICS
24
802.1X bindings, disabling
alert sounds 28
Always on Top setting 17
auto connection 33
autolaunch minimized 22
autolaunch on card insert 22
call guard 23
card eject warning 23
card lock 28
card status 18
CINR 18, 26
compact view, WCM 17
Connect button 18
connection mode 20, 33
connection status 18
connection status icons 15
data rates 26
data volume 26
Debug Monitor, enabling
Disconnect button 18
docking WCM 17
download rate 26
EAP methods 35
eject warning 23
event sounds 28
exit prompt 23
full scan 19
Home Operator 33
22
icons, connection status 15
idle mode 38
introduction 8
jet black skin
16, 17, 19
LED indicators 10
lost signal 18
online duration 26
operator restriction 20, 33
package checklist 9
PKMv2 38
power save mode 20, 33
profiles
auto connection 33
prompt, before exit 23
roaming call guard 23
RSSI 18, 26
signal lost 18
signal quality status 18
signal strength, receive 18
SIM card status 18
software upgrade 29
sounds for events 28
specifications 42
transmit power 26
troubleshooting 39
– 49 –
INDEX
upgrading software 29
upload rate 26
USIM enable 23
USIM status 18
Wave Version 18
WCM utility
compact view 17
Connect button 18
exit prompt 23
starting 15
– 50 –
US211
E082009-AP-R01
149100000031W

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Mode                       : UseOutlines
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Creator Tool                    : FrameMaker 9.0
Modify Date                     : 2009:11:26 18:01:13+08:00
Create Date                     : 2009:07:24 09:00:56Z
Metadata Date                   : 2009:11:26 18:01:13+08:00
Format                          : application/pdf
Title                           : US211-3.5-81 UG R01.book
Creator                         : angel_peng
Document ID                     : uuid:05eb3a52-2ba6-4d2c-9bf2-d8ba75c6c91f
Instance ID                     : uuid:9a3f9b2e-46e6-4067-8c33-fe4a6d08900b
Has XFA                         : No
Page Count                      : 22
Author                          : angel_peng

EXIF Metadata provided by EXIF.tools