Accutech Security HWHY-662017 RFID Tag activated by Controllers at Portals of egress and respond per customer needs User Manual CS WWTag

Accutech Security, LLC RFID Tag activated by Controllers at Portals of egress and respond per customer needs CS WWTag

Exhibit D Users Manual per 2 1033 b3

Download: Accutech Security HWHY-662017 RFID Tag activated by Controllers at Portals of egress and respond per customer needs User Manual CS WWTag
Mirror Download [FCC.gov]Accutech Security HWHY-662017 RFID Tag activated by Controllers at Portals of egress and respond per customer needs User Manual CS WWTag
Document ID4049718
Application IDDmRf+bFE/NEc9R2itDKLhg==
Document DescriptionExhibit D Users Manual per 2 1033 b3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize7.7kB (96311 bits)
Date Submitted2018-10-26 00:00:00
Date Available2018-10-26 00:00:00
Creation Date2018-10-25 10:16:48
Producing SoftwarePDFCreator 3.2.0.11758
Document Lastmod2018-10-25 10:16:48
Document TitleCS_WWTag
Document CreatorPDFCreator 3.2.0.11758
Document Author: MarkK

CUT SHEET: Wander Wearable Tag
A Wander Wearable Tag is a stylized form fitting waterproof tag and band worn by a resident or patient. When a resident
or patient enters a Tx Activation Field, the Tag sends a signal to the receiver in the door controller. The door controller
processes this information for an appropriate response (e.g., sounding alarms, locking doors). Door controllers can be an
LC Unit, ES Unit or a LS unit. WW (L) is for LC and ES systems and WW (S) is for LS and IS systems. The WW tags are
warranted for 6 months and have been engineered for greater than 6 months usage and can be activated/deactivated with a
STAD or IDTAD. The WW tag is used with band, part # 100917-5 (5 pack).
ELECTRICAL:
Power: 3.0V lithium battery
Access Control Accessory
MECHANICAL:
Tag Size: 2.25” x 0.625” x 0.875”
Tag Weight: 0.5 ounce
Band Size: 14.25” x 0.95” x 0.25”
Band Weight: 0.25 ounce
OPERATING CHARACTERISTICS:
Transmit Frequency: 418 MHZ
Receive Frequency: 127-137 kHz
FCC ID: JM7-HWHY-662017
Canada IC: 2683A-662017
ATTACHMENT:
WW Tags are attached with a size adjustable silicon band. The
band is designed to resist tearing caused by pulling or chewing on
the band. However, if the band becomes frayed or torn it will need
to be replaced. The band should be replaced periodically for
cleanliness. Tags are typically attached to a wrist or ankle.
MAINTENANCE:
WW Tags are reusable but they must be thoroughly cleaned
and sanitized between applications.
Acceptable cleaning methods:
Antibacterial wipes or Hydrogen peroxide (wipe, do not soak)
In long-term applications, periodically replace the bands and
clean the Tags.
TESTING:
Enter a monitored zone (Alarm may sound)
With an STAD, IDTAD or TTS
STORING:
To preserve battery life and prevent nuisance alarms, WW Tags
should be turned off with an STAD or IDTAD, stored away from
sources of electrical noise, and stored in a metal container with
lid. Extra Tag bands should be stored in a clean and dry
environment.
ENVIRONMENTAL:
Operating Temperature: 32º to 120º Fahrenheit
Tag Model Number: WW (L)
Part Number: 77L017
Tag Model Number: WW (S)
Part Number: 77S017
Band Model Number:
Part Number: 100917-5
800-356-2671 | Accutech | www.AccutechSecurity.com
Page 1 of 2
“Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate
the equipment”
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement
800-356-2671 | Accutech | www.AccutechSecurity.com
Page 2 of 2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:7db4d986-dac4-11e8-0000-67041d5aefa9
Producer                        : PDFCreator 3.2.0.11758
Keywords                        : 
Modify Date                     : 2018:10:25 10:16:48-05:00
Create Date                     : 2018:10:25 10:16:48-05:00
Creator Tool                    : PDFCreator 3.2.0.11758
Document ID                     : uuid:7db4d986-dac4-11e8-0000-67041d5aefa9
Format                          : application/pdf
Title                           : CS_WWTag
Creator                         : MarkK
Description                     : 
Author                          : MarkK
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: JM7-HWHY-662017

Navigation menu