Acer B223W User Manual To The 932dec48 Acdd 4b89 A1e2 248872a84717
User Manual: Acer B223W to the manual
Open the PDF directly: View PDF .
Page Count: 55
Download | |
Open PDF In Browser | View PDF |
Acer Acer –LCD-B223W Service Manual LCD Monitor Acer B223W -0- 1 Table of Contents Important Safety Notice .........................................................................................01 01 Product Specification ..........................................................................................03 02 Flat Panel Specification .......................................................................................18 03 Exploded Diagram ..............................................................................................37 04 Troubleshooting ....................................................................................................39 05 Spare Parts List ...................................................................................................44 06 Schematics and Layouts.......................................................................................45 07 Assembly and Disassembly ................................................................................48 Appendix : User’s manual Copyright Copyright 2006 InnoLux Tech. Corp. Ltd All Rights Reserved This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd. Acer B223W Service Manual 1 Acer Acer –LCD-B223W Important Safety Notice 1. Safety precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper used or installation may cause damage to the monitor as well as to the user. Warning: This monitor should be operated only at the correct power sources indicated on the label on the rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer or Power Company. Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should only be repaired by a qualified technician. Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric shock to human bodies. Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable immediately and consult your closed dealer. Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply non-ammonia based cleaner onto the cloth, not directly onto the class screen. Do not place heavy objects on the monitor or power cord. z z z z z z z 2. Product safety notice Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this manual carefully. The use of substitute replacement parts, which do not have the same safety characteristics as specified in the parts list, may create shock, fire, or other hazards. 3. Service notes z When replacing parts or circuit boards, clamp the lead wires around terminals before soldering. z Keep wires away from high voltage, high temperature components and sharp edges. z Keep wires in their original position so as to reduce interference. z Adjustment of this product please refers to the user’ manual. 2 Acer Acer –LCD-B223W 01 Product Specification 1. General: BV223W series LCD monitor is designed with a wide screen 22.0” WSXGA+ TFT LCD panel, LVDS interface, Analog RGB signal input. It featured with embedded universal AC power supply. This monitor can support maximum resolution up to 1680 x 1050@60Hz. Details in this document DVI referred to is an option function depending on client’s requirement. In our factory, products should be distinguished by module names. 1.1 Main Features Maximum resolution Back light system Pixel pitch Display area Brightness Contrast ratio Response time (Tr+Tf) Viewing angle Input interface Digital Option(DVI-D 24 pin) Power management Plug & Play OSD language : 1680 x 1050 @ 60Hz : 4 CCFL (top & bottom edge side) : 0.282 (H) x 0.282 (V) : 473.76(H)x296.1(V) 22.0 inch diagonal : ≥250cd/m² : 1000׃1 (typ.) : 5ms (typ.) : 160°(H)/ 160°(V), typ : Analog (D-sub 15 pin) (1) (2) (3) : Compatible with VESA DPMS : VESA DDCCI : English, French, Spanish, Italian, Deutsch, Simplified Chinese, Traditional Chinese, Japanese (Dutch, Finnish, Russian depend on sale region) Universal AC power supply Note (1)(2)(3): This item spec depend on the LCD panel. 1.2 Accessories AC Power Cord VGA cable User manual Warranty card DVI cable (option) : 1.8 m. (Black. Cord type depend on sale region) : 1.8 m. (15 pin D-SUB, black cable with blue male connector) : English (640Mb CD) : 1.8 m. (18+1 pin, black cable with white connector) 2. Operation Specifications The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence. 2.1.1 Operating: Temperature range Relative humidity 2.1.2 Storage note 1: Temperature range Humidity range 2.1.3 : 0°C to 40°C : 20% to 90% : -20°C to 60°C : 10% to 90% Altitude note 2 Operating Storage 10000 ft (Ta=50, t=24h) 40000 ft (Ta=30, t=24h ) Note 1: Temperature and relative humidity range must be in the area shown as the following figure due to panel limited 3 Acer Acer –LCD-B223W Note 2: Altitude spec must not over panel spec. Figure 1 Absolute Ratings of Environment 2.1 Safety, EMC, Ergonomics and Compatibility Requirements Safety & EMC cUL, UL, CE, CB, CCC, TUV/GS, TUV/EGO, TUV/ISO-13406-2, C-Tick (N214), VCCI, FCC, CE, CCC, BSMI, C-Tick Ergonomics TCO99, TCO03 Compatibility Windows 98/Me/2000, Windows XP, Window Vista Power Management Energy Star V4 2.2 Electrostatic Discharge Requirements The subject unit must withstand ±8KV for contact discharge and ±15KV for air discharge of Electrostatic Discharge and meet the standard of IEC61000-4-2(EN55024). (without discharge on VGA/DVI/HDMI pin) 2.3 Reliability The MTBF of this product shall be greater than 40,000 hours excluding the LCD panel. The LCD panel life which is defined as the time period for the maximum luminance to reduce to 50% of the initial value is 40,000 hours minimum at the condition of displaying an all WHITE field at mid Brightness and Contrast settings. 3. Electrical and Optical Characteristics and Performance 3.1 Backlight Power Supply 3.1.1 AC Input Voltage Range It is a universal type and the input voltage range is from 100 ~ 240Vrms 3.1.2 AC Input Current 1.2A (max) at 100VAC input 0.6A (max) at 240VAC input 3.1.3 AC Frequency Range The frequency range is from 50Hz to 60Hz 3.1.4 Inrush Current a. 40A max at cold-start, 25°C, DC output full-loading and 100Vac input b. 60A max at cold-start, 25°C, DC output full-loading and 240Vac input Notes: 1. Before each test, the buck capacitor need to be discharged. 2. Before each test, it must be 10 minutes at least after the latest test. 3.1.5 Regulator Efficiency≥75% 4 Acer Acer –LCD-B223W (DC output full loading and nominal AC input voltage range) 3.1.6 Ripple and Noise Total composite ripple and noise less than 320mV for +16V output, and less than 150mV for +5V output, and 50mV for +3.3V output tested by DC loading side parallel with a 47uF/EC and 0.1uF/Ceramic. Capacitors and measured band-width with DC-20MHz 3.1.7 DC Output Voltage and Current DC Output Voltage VCC16V VCC5V 15.2V-18.5V 4.75~5.25V Current Typ. 1.8A 1.5A Max. 2.2 A 1.8A Note: For the normal loading test ,the output loading use typical current. 3.1.8 Protection a. SCP: For short circuited protection and with auto-recovery function.(for 5V output it must be shorted before F802) b. OPP: Over-power protection, Range: 60W ( min ) on nominal AC input. c. BOP: Brown Out protection Condition: Pattern: Dot pattern, Timing: 1680x1050 60Hz, Brightness: Max. Contrast: Max Spec: system shutdown voltage must be > 50V system restart voltage must be <85V 3.1.9 Power consumption Max. 55W. Follow Energy Star V4 condition 49W 3.1.10 Power management BV223W supports Energy Star V4 and VESA DPMS Status On Mode/Active Power Sleep Mode/Low Power Off Mode/Standby Power H-sync V-sync Video Power on on active ≤ 55W Blue off on blanked < 2W Orange on off blanked < 2W Orange off off blanked < 2W Orange -- -- -- < 1W Off 3.2 Backlight Item Symbol Min. Typ. Max. Unit Remark Input Voltage Vin 15.2 16.0 18.5 V Von 2.0 3.3 5.5 V Voff -0.3 --- 0.8 V Enable (On/Off) Kick off Voltage: Item Symbol Min. Typ. Max. Unit Kick off Voltage Vs 1700 --- Vrms --- 5 Remark LED Acer Acer –LCD-B223W On Load Function: Item Symbol Min. Typ. Max. Unit Input Current Iin --- 1.8 2.2 A Frequency F 40.0 45.0 80 kHz @Max-Load Output Current for IL One Lamp 3.0 7.0 8.0 mArms PWM dimming control mode: 2mA≤IL ≤8mA Operating Voltage Vo --- 750 --- Vrms Brightness PWM duty 35% --- 100% Kick Off Voltage Hold Up Time T 1.0 1.5 --- Efficiency η 75% --- --- S Remark @Vin=16.0V Brightness=3.3V @Vin=16.0V Brightness=3.3V 3.3 Brightness output The test to verify specifications in this section shall be performed under the following standard conditions unless otherwise noted. Temperature Test pattern Video Resolution Video input level Warm-up time : 25 ± 5°C : white : 1680 x 1050 : 700 mV ± 2% : 30 minutes Set brightness control and also contrast control at maximum, to measure the screen center, the light output shall ≥ 250 cd/m2 (as panel spec) 3.4 White balance The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 ) Chromaticity Coordinate Mode y Cool 9300K 0.283 ± 0.030 0.297 ± 0.030 Warm 6500K 0.313 ± 0.030 0.329 ± 0.030 Panel While x Panel While y User 3.5 x Brightness uniformity The test standard conditions refer to Sec 3.4. Min. luminance of nine points (backlight ) ≥75% Max. luminance of nine points (backlight ) 6 Acer Acer –LCD-B223W L/10 L/2 4 5 6 1 2 3 7 8 9 W/10 W/2 4. Input / Output Signal Specifications 4.1 Video signals Analog RGB signal: 0.7Vp-p Sync: TTL level (Input impedance ≧ 1k Ohm) (Input impedance = 75 Ohm) Positive and negative sync of Separate Horizontal/Vertical Sync Digital : TMDS Signal: (min) ±200mVpp@24Bit 4.2 Signal Timing Through D-SUB/DVI connectors, this unit can support FH= 31.5~84 KHz, Fv=56~76Hz, with maximum pixel clock 165MHz input signal and WSXGA+ output. Modes details as below: VESA MODES Mode VGA SVGA XGA SXGA SXGA+ Horizontal Vertical Nominal Frequency +/-0.5KHz Sync Polarity Nominal Frequency +/-1Hz Sync Polarity 640*480@60Hz 31.469 N 59.941 N 25.175 640*480@72Hz 37.861 N 72.809 N 31.500 640*480@75Hz 37.500 N 75.000 N 31.500 800*600@56Hz 35.156 P 56.250 P 36.000 800*600@60Hz 37.879 P 60.317 P 40.000 800*600@72Hz 48.077 P 72.188 P 50.000 Resolution Total Nominal Pixel Clock (MHz) 800*600@75Hz 46.875 P 75.000 P 49.500 1024*768@60Hz 48.363 N 60.004 N 65.000 1024*768@70Hz 56.476 N 70.069 N 75.000 1024*768@75Hz 60.023 P 75.029 P 78.750 1152*864@75Hz 67.500 P 75.000 P 108.000 1280*960@60Hz 60.000 P 60.000 P 108.000 1152*720@60Hz 44.859 N 59.972 P 66.750 1280*1024@60Hz 63.981 P 60.020 P 108.000 1280*1024@75Hz 79.976 P 75.025 P 135.000 1400x1050@60Hz 65.317 N 59.978 N 121.75 7 Acer Acer –LCD-B223W UXGA 1600*1200@60Hz 75.000 P 60.000 P 162.000 WXGA 1360*768@60Hz 47.712 P 60.015 P 85.5 1440*900(Red)@60Hz 55.469 P 59.901 N 88.75 1440*900@75Hz 70.635 N 74.984 P 136.75 1680*1050@60Hz 65.290 N 59.954 N 146.250 640*350@70Hz 31.469 P 70.087 N 25.175 720x400@70Hz 31.469 N 70.087 P 28.322 WXGA+ WSXGA+ IBM MODES EGA MAC MODES VGA 640*480@66.7Hz 35.000 P 66.667 P 30.240 SVGA 832*624@75Hz 49.725 N 74.550 N 57.283 XGA 1024*768@75Hz 60.241 N 74.927 N 80.000 1152*870@75Hz 68.681 N 75.062 N 100.00 Other MODES XGA 1024*768@72Hz 57.669 N 72.086 N 78.434 SXGA 1280*1024@70Hz 74.882 P 69.853 P 127.000 Note: 1. Non-interlace signals only (An interlace signal cannot be display) 2. Please refer to F/W specification for more detail 3. Each frequency of Power Macintosh and Sun Ultra is a reference value 4.3 Timing requirements The LCD monitor must be capable of displaying standard resolutions within the vertical frequency range of 56 ~ 76 Hz and the horizontal scan range of 31.5 ~ 84 KHz with maximum pixel clock of 190MHz. Vertical / Horizontal Sync polarity: positive or negative. If input signal is out of range of horizontal 31.5~84 KHz or vertical 56-76Hz, or pixel clock large than 165MHz, message “Input Not Supported” is shown on screen. 4.1 DDC data V223W Analog 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 00 FF FF FF FF FF FF 00 04 72 1B 00 00 00 00 00 1 00 00 01 03 08 2F 1E 78 EA DE 95 A3 54 4C 99 26 2 0F 50 54 BF EF 90 A9 40 71 4F 81 40 01 01 95 00 3 95 0F 90 40 01 01 21 39 90 30 62 1A 27 40 68 B0 4 36 00 DA 28 11 00 00 19 00 00 00 FD 00 38 4D 1F 5 54 11 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30 6 30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC 7 00 56 32 32 33 57 0A 20 20 20 20 20 20 20 00 CS 8 Acer Acer –LCD-B223W V223W DVI 0 1 00 FF 00 00 0F 50 95 0F 36 00 54 11 30 30 00 56 0 1 2 3 4 5 6 7 2 FF 01 54 90 DA 00 30 32 3 FF 03 BF 40 28 0A 30 32 4 FF 80 EF 01 11 20 30 33 5 FF 2F 90 01 00 20 30 57 6 FF 1E A9 21 00 20 30 0A 7 00 78 40 39 19 20 30 20 8 04 EA 71 90 00 20 30 20 9 72 DE 4F 30 00 20 30 20 A 1B 95 81 62 00 00 30 20 B 00 A3 40 1A FD 00 0A 20 C 00 54 01 27 00 00 00 20 D 00 4C 01 40 38 FF 00 20 5. Function Specifications All the tests to verify specifications in this section shall be performed under the following standard conditions unless otherwise noted. The standard conditions are: Temperature Warm-up time Checking display modes : 25 ± 5°C : 30 minutes minimum : All the specified modes 5.1 Panel general specifications A General specifications Supplier Model name Display Area Pixel Pitch InnoLux INL MT190AW01(V-5) Display Colors: 16.7 Million (6-bit + HI-- FRC) Number of Pixel Pixel Arrangement Brightness Contrast Ratio 1440x900 pixels RGB vertical stripe 300cd/m2 (Typ.) 250cd/m2 (Min.) 700:1 Typical Hor:160°, Ver: 160° (Typical, CR>10) Normally White 75Hz Tr + Tf = 5ms Typical Anti-glare, Haze = 25%, Hard coating (3H) 4 CCFL 427.2(W)x277.4(H)x16(D) Typ 410.4 ( H ) x256.5 ( V ) 0.285(H) x 0.285(V) Viewing Angle Display Mode Frame rate Response Time Surface Treatment Lamp Outline Dimension 5.2 Keypad Function 5.2.1 Control buttons on the front bezel CONTROL KEY [AUTO] KEYS FUNCTION A. When OSD un-displays, press [AUTO] to perform auto-adjustment B. When OSD displays, press [AUTO] to return to previous level menu C. When “e Color OSD” OSD displays, press [AUTO] to exit the OSD 9 E 00 99 95 68 4D 00 00 00 F 00 26 00 B0 1F 30 FC CS Acer Acer –LCD-B223W A. When OSD isn’t shown on screen, press [MENU] to enter OSD interface. The OSD interface uses “ACER e Color Management” and “User” to instead “Contrast” and “Brightness” separately. When press “ACER e Color Management” to show “e Color OSD”, and press “User” to show OSD interface before. The translations of “ACER e Color Management” and “User” are always English. B. When OSD displays, press [MENU] to perform function of menu icon that is highlight or enter next level menu [MENU] A. When “MENU OSD” displays, press these keys to change the contents of an adjustment item, or change an adjustment value B. When “MENU OSD” un-displays, if it is with audio, press [►] to show “Audio” OSD and increase the volume, press [◄] to show “Audio” OSD and decrease the volume; else it has no use to press these keys. A. When OSD un-displays, press [e Color] to show “e Color OSD”, and press again the OSD can not disappear, but the time of “e Color OSD” disappearing is reset 10 second again. B. When OSD disappear not including “e Color OSD”, press [e Color] to show “e Color OSD” OSD, the OSD before disappears, but the parameters of it should be saved [►], [◄] [e Color ] [POWER] Power on or power off the monitor 5.3 Hot Key Operation HOT KEY OPERATION AUTO e Color ◄ ► MENU POWER FUNCTION FACTORY MODE ● ● ON Press [e Color ] & [MENU] at the same time, and then press [POWER] for DC power on. OSD menu will be shown with “F” on the left top. Select “F” for entering factory mode. 5.4 OSD Structure The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their default values. First Second Contrast Third Control Range --- 0 ~ 100 Brightness Brightness --- 0 ~ 100 10 Default Value User mode 50 Text mode 50 Standard mode 50 Graphics mode 60 Movie mode User mode 56 77 Text mode 44 Standard mode 77 Graphics mode 97 Movie mode 77 Acer Acer –LCD-B223W ------------- 0 ~ 100 Depend on each timing 0 ~ 100 50 ○1 0 ~ 100 50 0 ~ 100 Depend on each timing Red 0 ~ 100 80 Green 0 ~ 100 80 Blue 0 ~ 100 80 --------------------------- ----------------- English 0 ~ 100 50 0 ~ 100 50 10~ 120 20 ----- DDCCI ON/OFF ----ON DDCCI ON/OFF ON Focus Image Clock Horizontal Position Vertical Warm (6500K) Cool (9300K) Color User Language NO-EMEA EMEA English English Deutsch Deutsch Español Español 简体中文 Hollands 繁體中文 Русский Français Français Italiano Italiano 日本語 Suomalainen Hor. Position OSD Ver. Position OSD Timeout Analog Input (Dual) Input (Analg only) Digital Resolution Info H. Freq V. Freq ----- ------- ------- ----- ----- S/N Reset Exit ----- Notes; ○ 1 Clock default 50 is for Visa timing. Others depend on timing. 11 ------ET000….0000(22) ----- Acer Acer –LCD-B223W 6. SOP of firmware upgrade 6.1 Operational condition: Equipment: PC, ISP card, signal cable and power cable. ESD requirements: antistatic wrists, antistatic gloves (fingers), and connecting cable Name of ISP program: RTDTool_4.6.exe Manufacture of FW IC:RTD 2525L 6.2 Operational steps: 1. Connection: connect PC to PCBA with signal cable, and then keep AC and DC in open state. One port of ISP program card is connected to PC print port. 2. Adjust ISP programming Firstly, double click ISP_Tool_v3.7.5EXEI and open ISP program, then select “Device”, next select manufacturer model of FW IC, which should be correspondent with that of PCBA FW IC. Double click Figure One. FW IC Model 12 Acer Secondly﹐download FW software: (Fig.2). Acer –LCD-B223W first select “READ”, and then load FW software in Rooter FW software rooter Software Checksum Thirdly, select “Connect” and enter ISP MODE as in the following Figure 3. 13 Acer Acer –LCD-B223W Fourthly, select “AUTO”, and keep its default value. Click “RUN” for beginning programming. There will be prompting if programming is OK. Note: if programming fails or success rate is not high, click “Config” and adjust its speed in “E2PROM DEVICE SETTING” 14 Acer Acer –LCD-B223W After connecting, AC ON, DC ON ◆Flowing chart OK Open ISP program OK Choose manufacturer and model of FW IC OK LOAD FW software OK Click Connect and enter ISP MODE OK Choose Config and adjust programming Click AUTO and RUN for beginning programming OK NG Turn off power if programming is OK 15 Acer Acer –LCD-B223W 02. Flat Panel Specification 16 SPEC NO. PAG E M T 2 2 0W W 0 1 V. 0 3/23 Contents: A. General Specification B. Electrical Specifications 1. Pin assignment 2. Absolute maximum ratings 3. Electrical characteristics a. Typical operating conditions b. Display color vs. input data signals c. Input signal timing d. Display position e. Backlight driving conditions C. Optical specifications D. Reliability test items E. Safety F. Display quality G. Handling precaution H. Label I. Mechanical drawings Appendix ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 PAG E 4/23 A. General Specification NO. Item Specification 1 Display resolution (pixel) 1680(H) X 1050(V), WSXGA+ resolution 2 Active area (mm) 473.76(H) X 296.1(V) 3 Screen size (inch) 22 inches diagonal 4 Pixel pitch (mm) 0.282(H) X 0.282(V) 5 Color configuration R, G, B vertical stripe 6 Overall dimension (mm) 493.7 (W) X 320.1 (H) X 16.5 (D) (typ.) 7 Weight (g) 2900 (max.) 8 Surface treatment Anti-glare, Haze = 25%, Hard coating (3H) 9 Input color signal 8 bit LVDS 10 Display colors 16.7 M (6 bit with Hi-FRC) 11 Optimum viewing direction 6 o’clock 12 Backlight 4 CCFL 13 RoHS RoHS compliance Remark ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. PAG E M T 2 2 0W W 0 1 V. 0 5/23 B. Electrical Specifications 1.Pin assignment Connector JAE FI-XB30SSRL-HF16, Foxconn GS23302-0311R-7F or mechanical interface equivalent connector. Pin No. Symbol Description Frame VSS 1 RXinO0- -LVDS differential data input, Chan 0-Odd 2 RXinO0+ +LVDS differential data input, Chan 0-Odd 3 RXinO1- -LVDS differential data input, Chan 1-Odd 4 RXinO1+ +LVDS differential data input, Chan 1-Odd 5 RXinO2- -LVDS differential data input, Chan 2-Odd 6 RXinO2+ +LVDS differential data input, Chan 2-Odd 7 VSS 8 RXOC- -LVDS differential Clock input (Odd) 9 RXOC+ +LVDS differential Clock input (Odd) 10 RXinO3- -LVDS differential data input, Chan 3-Odd 11 RXinO3+ +LVDS differential data input, Chan 3-Odd 12 RXinE0- -LVDS differential data input, Chan 0-Even 13 RXinE0+ +LVDS differential data input, Chan 0-Even 14 VSS 15 RXinE1- -LVDS differential data input, Chan 1-Even 16 RXinE1+ +LVDS differential data input, Chan 1-Even 17 VSS 18 RXinE2- -LVDS differential data input, Chan 2-Even 19 RXinE2+ +LVDS differential data input, Chan 2-Even 20 RXEC- -LVDS differential Clock input (Even) 21 RXEC+ +LVDS differential Clock input (Even) 22 RXinE3- -LVDS differential data input, Chan 3-Even 23 RXinE3+ +LVDS differential data input, Chan 3-Even 24 VSS Ground 25 VSS Ground 26 NC No Connection 27 VSS Ground 28 VCC +5.0V power supply 29 VCC +5.0V power supply 30 VCC +5.0V power supply Frame VSS Ground Ground Ground Ground Ground ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 6/23 PAG E #30 #1 #1 #30 Rear view of LCM ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. M T 2 2 0W W 0 1 V. 0 SPEC NO. 7/23 PAG E 2. Absolute maximum ratings Parameter Values Symbol Unit Min. Max. Remark Power voltage Vcc -0.3 6 V At 25°C Input signal voltage VLH -0.3 4.3 V At 25°C Operating temperature Top 0 50 °C Note 1 Storage temperature TST - 25 60 °C Note 2 CCFL Current ICFL 3 8 [mA] Note 1: The relative humidity must not exceed 90% non-condensing at temperatures of 40°C or less. At temperatures greater than 40°C, the wet bulb temperature must not exceed 39°C. Note 2: The unit should not be exposed to corrosive chemicals. ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. M T 2 2 0W W 0 1 V. 0 SPEC NO. 8/23 PAG E 3. Electrical characteristics a. Typical operating conditions Item Symbol Min. Typ. Max. Unit Input Voltage Vcc 4.5 5 5.5 V Permissive Power Input Ripple VRF - - 0.25 V Black Icc - 900 - White Icc - 700 - Mosaic Icc - 800 IRush - - 4 A Input Current Rush Current Remark Note 1 mA Note 2 Note 3 Note 4 Logic Input Common Mode Voltage VCM - 1.2 - V Voltage Differential Input Voltage VID 100 - 600 mV Threshold Voltage (High) VTH - - 100 mV Note 5 Threshold Voltage (Low) VTL -100 - - mV Note 5 LVDS: IN+, IN- Note 1 : The specified current is under the Vcc =5V, 25°C, fv=60Hz (frame frequency) condition whereas black pattern is displayed. Note 2 : The specified current is under the Vcc =5V, 25C, fv=60Hz (frame frequency) condition whereas white pattern is displayed. Note 3 : The specified current is under the Vcc =5V, 25C, fv=60Hz (frame frequency) condition whereas mosaic pattern(black & white [8*6] ) is displayed. White : 255 Gray Black : 0 Gray ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 9/23 PAG E Note 4 : test condition : (1) VDD = 5 V, VDD rising time = 470 s ± 10% (2) Pattern: Mosaic pattern 90% VDD Ton=470 s 10% (3) Test circuit M1 5V 2SK1059 VDD ( LCD INPUT) FUSE R1 47K C1 1uF R2 CONTROL SIGNAL M2 2SK1399 1K (HIGH to LOW) 12V R3 C3 1uF 47K C2 10000pF Note 5 : LVDS signal definition VIN+ = Positive differential DATA & CLK Input VIN- = Negative differential DATA & CLK Input VID = VIN+ – VIN- , ∆VCM =VCM+–VCM-, ∆VID =VID+–VID-, VID+ =VIH+–VIH-, VID- =VIL+–VIL-, VCM = (VIN+ +VIN-)/2, VCM+ = (VIH+ +VIH-)/2, VCM- = (VIL+ +VIL-)/2, ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. PAG E M T 2 2 0W W 0 1 V. 0 10/23 Note 6 : Power on sequence for LCD VDD Parameter Value Unit Min. Typ. Max. ms T1 0.1 -- 10 ms T2 0 -- 50 ms T3 200 250 -- ms T4 100 250 -- ms T5 0 20 50 ms T6 0.1 -- -- ms T7 1000 -- -- ms ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 11/23 PAG E b. Display color vs. input data signals The brightness of each primary color (red, green and blue) is based on the 8-bit gray scale data input for the color; the higher the binary input, the brighter the color. The table below provides a reference for color versus data input. Input color data Color Red Green MSB LSB MSB Blue LSB MSB LSB R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0 Black Red(255) Green(255) Basic Blue(255) colors Cyan Magenta Yellow White 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 Red(000) dark Red(001) Red(002) : Red(253) Red(254) Red(255) bright 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 Green(000)dark Green(001) Green(002) Green : Green(253) Green(254) Green(255)bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 Blue(000) dark Blue(001) Blue(002) Blue : Blue(253) Blue(254) Blue(255) bright 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 0 0 0 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 0 : 1 1 1 0 0 1 : 0 1 1 0 1 0 : 1 0 1 Red ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 12/23 PAG E c. Input signal timing Support Input Timing Table The input signal timing specifications are shown as the following table and timing diagram. Signal Clock Vertical Horizontal Item Description Min. Typ. Max. Unit period 12.2 16.8 17.9 nS frequency 56 59.6 82 MHz TV_TOTAL V total line number 1059 1080 1100 TH TV_DATA Data duration 1050 1050 1050 TH TVB V-blank 9 30 50 TH fV frequency 56 60 76 Hz TH_TOTAL H total pixel number 890 920 1004 DClk TH_DATA Data duration 840 840 840 DClk THB H-blank 73 80 164 DClk Dclk Note: Because this module is operated by DE only mode, Hsync and Vsync input signals should be set to low logic level or ground. Otherwise, this module would operate abnormally. INPUT SIGNAL TIMING DIAGRAM Tv Tvd Tvb DE Th DCLK Tc Thb Thd DE DATA ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 13/23 PAG E d. Display Position D(1, 1) D(2, 1) …… D(840, 1) …… D(1679, 1) D(1680, 1) D(1, 2) .. . D(2, 2) …… D(840, 2) .. . …… D(1679, 2) .. . D(1680, 2) .. . D(1, 525) .. . D(2, 525) D(1680, 525) .. . D(1, 1049) D(1, 1050) …… …… …… …… D(840, 525) .. . …… …… D(1679, 525) .. . D(2, 1049) …… D(840, 1049) …… D(1679, 1049) D(1680, 1049) D(2,1050) …… D(840, 1050) …… D(1679,1050) D(1680, 1050) e. Backlight driving conditions Parameter Lamp voltage VL Lamp operation current IL Lamp starting voltage Frequency Lamp life time Note: Symbol Min. Typ. Max. 758(8mA) 794(7mA) 955(3mA) 3 7 8 1250 VLstart 1570 F 40 55 40000 80 Unit Remark Remark Vrms mArms Vrms Note 1 T = 25 Note 2,3,4,5 T = 0 Note 2,3,4,5 KHZ Note 5 Hr Note 6 The waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. The performance of the Backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the DC-AC inverter for the lamp. All the parameters of an inverter should be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. When designing or ordering the inverter please make sure that a poor lighting caused by the mismatch of the Backlight and the inverter (miss-lighting, flicker, etc.) never occurs. If the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. Note 1 : The degree of unbalance: less than 10% The ratio of wave height: less than 2 ± 10% Ip Ip: high side peak I-p I-p: low side peak The degree of unbalance = |Ip-I-p| /Irms*100(%) The ratio of wave height = Ip(or I-p)/Irms Lamp should be completely turned on. ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 14/23 PAG E Note 2: Test equipment: AS-114B Note 3: The voltage shown above should be applied to the lamp for more than 1 second after startup. Otherwise, the lamp may not be turned on normally. Note 4: Inverter should provide more than min. value, and then lamp could be completely turned on. Note 5:Lamp frequency may produce interference with horizontal synchronous frequency and this may cause line flow on the display. Therefore lamp frequency shall be detached from the horizontal synchronous frequency and its harmonics as far as possible in order to avoid interference. Note 6:Lamp life definition: The brightness of lamp becomes 50% of the initial brightness or not normal lighting. Backlight connector : 35001HS-02L Pin no. Symbol Function Remark 1 VIH Lamp high voltage input Cable color: Pink 2 VIL Lamp low voltage input Cable color: White 3 VIH Lamp high voltage input Cable color: Blue 4 VIL Lamp low voltage input Cable color: Black ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. M T 2 2 0W W 0 1 V. 0 SPEC NO. 15/23 PAG E C. Optical Specifications Specification Item Symbol Condition Min. Tr Response time Tf = 0 Tr+Tf Contrast ratio CR Top Bottom Viewing angle Left Right Brightness (Center) 1.5 3 3.5 7 5 10 700 1000 CR10 70 80 CR5 75 85 CR10 70 80 CR5 75 85 CR10 75 85 CR5 80 89 CR10 75 85 CR5 80 89 250 300 YL Wx 0.313 Wy 0.329 Rx 0.640 Gx Gy -0.03 = 0 0.349 0.284 0.142 By 0.067 δw Cross talk Ct Unit Remark ms Note 4 Note 3,5 +0.03 deg. Note 3,5,7 nit Note 3,6 Note 3 0.617 Bx White uniformity (9 points) Note Note Note Note Max. θ= 0 Ry Color chromaticity(CIE) Typ. 0.75 0.80 2% Note 3,8 Note 9 1: Ambient temperature = 25°C. 2: To be measured in dark room after backlight warm up 30 minutes. 3: To be measured with a viewing cone of 2°by Topcon luminance meter BM-5A. 4: Definition of response time: The output signals of BM-7 are measured when the input signals are changed from “Black” to “White” (falling time) and from “White” to “Black” (rising time), respectively. The response time interval is between the 10% and 90% of amplitudes. Refer to figure as below : ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SPEC NO. M T 2 2 0W W 0 1 V. 0 16/23 PAG E "Black" "White" "White" Signal(Relative value) 100% 90% 10% 0% Tr Tf Note 5: Definition of contrast ratio: Contrast ratio is calculated by the following formula. Contrast ratio (CR)= Brightness on the "white" state Brightness on the "black" state Note 6: Driving conditions for CCFL: IL= 7mA, 50 KHz Frequency. Note 7: Definition of viewing angle. Note 8: Definition white uniformity: Luminance are measured at the following nine points (P1~P9). Minimum Brightness of nine points (P1~P9). W= Maximum Brightness of nine points (P1~P9). ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. M T 2 2 0 W W 0 1 V. 0 SP EC NO. 17/23 PAG E Note 9: 1/2 1/6 2/3 1/6 A 1/2 1/3 1/6 1/6 A’ 1/3 1/2 1/2 B 127 gray level B’ 2/3 127 gray level 0 gray level l LA-LA’ l / LA x 100%= 2% max., LA and LA’ are brightness at location A and A’ l LB-LB’ l / LB x 100%= 2% max., LB and LB’ are brightness at location B and B’ Note 10: Optical characteristic measurement setup. Photo-detector (BM-5A) Field=2˚ 50cm LCD Panel ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SP EC NO. M T 2 2 0W W 0 1 V. 0 18/23 PAG E : D. Reliability test items Test Item Test Condition Judgment Remark High temperature storage 60°C, 240Hrs Note 1 Note 2 Low temperature storage -25°C, 240Hrs Note 1 Note 2 High temperature & high 40°C, 90%RH, 240Hrs Note 1 Note 2 humidity operation (No condensation) High temperature operation 50°C, 240Hrs Note 1 Note 2 Low temperature operation 0°C, 240Hrs Note 1 Note 2 Thermal Shock -20°C~60°C Note 1 Note 2 (non-operation) 1Hr, 10mins, 1Hr, 100cycles Note 1 Note 2 Note 1 Note 2 Note 1 Note 2 Note 1 Note 3 Electrostatic discharge (ESD) Contact:+/-8kV, 150pF(330ohms), (non-operation) 25 times/1 point, 1 time/1 sec Air discharge:+/-15kV, 150pF(330ohms), 25 times/1 point, 1 time/1 sec Vibration Vibration level : 1.5G (non-operation) Bandwidth : 10-300Hz Waveform : sine wave, sweep rate : 10min 30 min for each direction X, Y, Z (1.5 Hrs in total) Mechanical Shock Shock level : 50G, 11ms (non-operation) Waveform : Half sine wave Direction : ±X, ±Y, ±Z One time each direction MTBF Demonstration 40,000 hours with confidence level 90% Note1: Pass: Normal display image with no obvious non-uniformity and no line defect. Partial transformation of the module parts should be ignored. Fail: No display image, obvious non-uniformity, or line defects. Note2: Evaluation should be tested after storage at room temperature for one hour. Note 3: The MTBF (exclude the CCFL ) calculation is based on the assumption that the failure rate distribution meets the Exponential Model. ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. SP EC NO. M T 2 2 0W W 0 1 V. 0 PAG E : 19/23 E. Safety 1. Sharp Edge Requirements There will be no sharp edges or corners on the display assembly that could cause injury. 2. Materials a. Toxicity There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used, they will be reviewed and approved by the responsible InnoLux Toxicologist. b. Flammability All components including electrical components that do not meet the flammability grade UL94-V1 in the module will complete the flammability rating exception approval process. The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be printed on the printed circuit board. c. Capacitors If any polarized capacitors are used in the display assembly, provisions will be made to keep them from being inserted backwards. F. Display quality The display quality of the color TFT-LCD module should be in compliance with the Innolux’s Incoming inspection standard. G. Handling precaution The Handling of the TFT-LCD should be in compliance with the Innolux’s handling principle standard. ALL RIGHTS RESERVED ANY PORTION OF THIS DOCUMENT SHALL NOT BE REPRODUCED, COPIED, OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PRIOR WRITTEN PERMISSION FROM INNOLUX DISPLAY CORPORATION. Acer Acer –LCD-B223W 03 3.1 Exploded Diagram Screw List Fixed Item Part No. Description Qty T(kg*cm Remark ) 1 509146306102R SCREW P CROSS W/W-SPR M3*6 Zn 2 3.75±0.25 FOR POWER 2 509000000700R BOLT,#4-40x11.8,Ni 4 4.0±0.25 D-SUB CON&DVI 3 50911661210 2R 4 10.5±0.25 For back-cover to STAND ASSY 4 509146306200R 5 3.75±0.25 FOR POWER&IF SCREW,P,CROSS,M4*12,BLK-Zn,RO HS(NYLOK) SCREW P CROSS W/WAS M3*6 ZN-Cc 17 Acer 3.2. LCD Exploded drawing (All) Acer –LCD-B223W 18 Acer Acer –LCD-B223W 04 Troubleshooting 1. No Power & LED Off Unstable power Check sampling Circuit Check R822, R823, R824 Change R822,R823, R824 Check the C pin voltage of IC803 if 3V Check the R pin voltage of IC803 about 2.5V Check R819, R820 Check pin2 of IC802 voltage is 3V Check R818, D804, C807 if short Change R818, D804, C807 Check pin1 of IC802 voltage below 1V Change R808, R 809, R810, R 811, R815, R814 Q803 END 19 Change IC803 Acer Acer –LCD-B223W 2. No raster N o b a c k li g h t Y es L E D la m p is O K N o p o w e r su p p ly t o i n v e rt e r No Y es C h e c k t h e c a b l e t h a t fro m I/ F B D t o P / I B D i s o k Y es Is t h e re 1 6 V v o l ta g e o n p in 3 ,4 o f T 5 0 1 ,T 5 0 2 No U 5 0 1 , U 5 0 2 fa i l Y es Y es Is t h e re PW M si g n a l o n p i n 4 o f IC 5 0 1 No No C h e c k I/ F B D No C h e c k I/ F B D Y es L a m p c o n n e c to r o p en ed C hec k p o w e r su pp ly R e p l a c e U 5 0 1 ,U 5 0 2 Y es Is th e re H ig h le v e l v o l t a g e o n p i n 1 0 o f IC 5 0 1 Y es V se n s e v o l t a g e i s 2 .9 V No A re t h e re P W M si g n a l o n p in 1 , p i n 1 5 o f IC 5 0 1 No IC 5 0 1 fa i l u re Y es F e e d b a c k c i rc u it fa i lu re Y es C h e c k C 5 2 4 ,R 5 2 8 , R 5 3 3 , D 5 07 IC 5 0 1 p ro t e c t e d Y es C h eck D 5 0 5 , D 5 1 1, D 5 12 , D 51 3 , R 5 20 , C 5 2 0 Y es P i n 5 o f IC 5 0 1 v o lt a g e i s L ow leve l NO P in 3 o f IC 5 0 1 v o l t a g e i s h i g h l e v e l v o l ta g e Y es Y es EN D 20 Acer Acer –LCD-B223W 3.Black screen B la c k s c re e n NG C heck pow er s u p p l y :p i n 1 ,2 o f C N 101 P o w e r fa il OK NG C heck F B 1 0 2 ,F B 1 0 3 , C h e c k p o w e r s u p p ly fo r U 1 0 4 OK NG C h e c k re s e t (p in 1 0 8 ) of U 104 C h e c k C 1 5 1 ,R 1 6 5 OK NG C h e c k c ry s ta l (p in 1 2 7 ,1 2 8 ) w a v e f o r m o f U 105 C heck X 1 0 1 ,C 1 5 0 ,C 1 5 2 OK C heck C C FL E n a b l e ,B r i g h t n e s s ( p i n 1 0 9 ,1 2 5 ) of U 104 NG OK OK C h e c k p i n 5 ,6 o f C N 101 In v e rte r F a il NG C h e c k R 1 1 1 ,Q 1 0 6 , R 1 1 2 ,R 1 4 7 ,R 1 4 8 U 1 0 4 F A IL 21 Acer Acer –LCD-B223W 4.Bad Screen Black screen NG Check p ower supply:pin 1,2 of CN10 1 Pow er fail Y ES NG Check pow er su pply for U1 04 Check F B102 ,FB10 3, Y ES NG Ch eck reset (pin1 08) of U1 04 Ch eck C15 1,R165 Y ES NG Check cry stal (pin 127 ,128) waveform of U10 5 Check X101 ,C150,C 152 Y ES Check CCF LEnable,Brightness(pin 109 ,125) of U1 04 NG YES YES Check pin5,6 of CN10 1 In verter Fail NG Check R1 11,Q 106, R1 12,R14 7,R148 U104 FA IL 22 Acer Acer –LCD-B223W 5. White screen White screen OK LVDS Cable Reinsert Workmanship NG OK Change LVDSCable LVDS cable NG NG OK OK Check VLCD is 5V Check LVDS signal NG NG NG Check Panel-Enable of U104(pin73) U104 Fail OK Check Q101,Q103,Q104, R108,R104,C110,C 108 END 23 Panel Fail Acer Acer –LCD-B223W 6. No Sound No sound NG Pin1,pin2 of P701 No sound signal input OK NG Check 16V Power supply Pin13 of U701 OK NG Check pin7,pin8 of CN101 Check R141,R142,R157,R 158 of IF board OK NG Check Pin3,Pin10 of U701 Check Q701,Q702,Q703,Q 704,R701,R702, OK NG Check C705,C707 U701 Fail OK Check speaker 24 Acer Acer –LCD-B223W 05 Spare parts List 8221D271A1E0R OEM PART NO DESCRIPTION ET.LBM0C.003 791411301601R PCBA,I/F BOARD(V2,EMEA,W/SPK)LE22D2-612 1 791411301602R PCBA,I/F BOARD(V2,W/SPK),LE22D2-612 ROHS 0 791411401610R PCBA,P/I BOARD,W/SPK,LE22D2-612 ROHS 1 791401500000R PCBA,KEYPAD BOARD,LE9D0-612 ROHS 1 453070801190R PWRCORD 16A/250V BLK 6FT VDE/KTL H05VV-F 1 453070800230R PWRCORD 5A/250V BLK 6FT UK3Gx.75mm(SP60/ 1 453030300370R CABLE,DVI-D 18+1P MALE 6FT BLACK , ROHS 1 453010100380R CABLE,D-SUB 15P MALE 6FT BLACK/BLUE, ROH 1 453030300120R CABLE AUDIO 1P 6FT BLACK/GREEN CP03B06P0 1 430300801700R HRN ASSY 2x4P 100mm UL1571#28,ROHS 1 430300801690R HRN ASSY 2x4P to 8P 245mm UL1571#28,ROHS 1 430303001510R HRN LVDS FFC 30P 228mm W/TASTE ROHS 1 714011202700R ASSY,STAND,B223W/LE22D2 1 714030015520R ASSY,BEZEL,FRONT,(black),B223W/LE22D2 1 714050014231R ASSY,COVER,BACK,W/DVI,W/SPK,AUO,B223W/LE 1 502090310311R CHASSIS,W/DVI,W/SPK,B223W/LE22D2 1 618100200350R SPEAKER 2W 8Ω 340mm&370mm R/G/B W/CASE 1 631102220180RA LCP 22" M220EW01-V0-000(A)(AUO)ROHS 1 631102220190RA LCP 22" M220EW01-V0-00A(A)(AUO)ROHS 1 631102220220RA LCP 22" M220EW01-V0B(AUO)ROHS 1 25 Acer Acer –LCD-B223W 06 Schematics and Layouts 6.1 PI BD Layout 26 Acer Acer –LCD-B223W 6.2 IF BD Layout 27 3 2 R827 10 C805 2200p/400V DC 380V Max. T801 SPW-100 1 R805 0R2 1W 10 R828 10 + + C804 150u/450V P6KE150A AC 264V 3 L801 20mH 2 R810 3M C R818 100K 1% RT801 NTC 5R 3 4 D806 5uH L803 C824 470u/16V + SP1040C + C820 1000u/10V 9 Q801 2PC1815GR 3 R830 200 2 3 D + C822 0.1/50V C823 1000u/10V /NC F802 5A/35V VCC5V 3 8 5 OUT R832 470Ω 1% C828 2200p/400V C808 100p/1KV R822 15K4 1% R823 C826 100k 1% 0.1/50V 3 6 LD7522 IC802 4 2 1 7 8 5 OVP C827 470p/50V (-)LATCH AC 264V RMS R812 330K 1% C811 2.2u/50V RMS AC 264V C803 0.47/275V CS LTV817M IC801 R816 1K C814 100p/50V C813 1000p/50V R814 10K R815 0R43 2W 4 1 3 2 R826 NC R833 10K R820 4K7 1% C821 0.47/100V R821 2K2 1% C D807 1N4148 A R + C809 10u/35V IC803 TLV431ALP B R824 10K 1% C802 1000p/400V CN801 SW801 SW DPST A 2 3 N L 1 Q804 AP2761I 1 R813 10R COMP 10K 1% 3 R819 BNO C801 1000p/400V C807 10u/35V FB801 120Ω 3A 1 ZD801 13V C R803 330K F801 2.5A/250V + C812 100P/50V R811 3M 330K B D804 FR103 VCC R802 6 DC 650V Max GND R801 330K C810 0.1/50V 7 C817 C818 C819 1000u/25V 470u/25V 680u/25V /NC D805 SP1040C /NC 1 2 3 R831 100Ω 1W + R829 10K 1 R809 3M R808 82K DC 650V Max RMS D802 MUR1100ERL R807 82K +16V 3,4 + R825 82K 1% AC 264V 4 - RMS 3 4 C806 4700p/400V 2 R806 82K 5uH L802 C816 1000p/500V 2 1 ZD802 2 D803 SP10100C 1 2 3 + D D801 BL4-06 1 C815 1000p/500V 2 4 1 5 1 2 3 4 5 6 7 8 9 10 11 12 VCC5V TO SCALER BD CN101 ON/OFF ON/OFF BRIGHTNESS VOLUME MUTE Document Number : 3 3 4 4 HDMI_Audio_L 4 HDMI_Audio_R 4 PC_HDMI_SWT 4 12P 2.0mm DATE : SHEET 4 SIZE : A4 APPRO BY : TITLE : P801 AC_SKT 5 B223W InnoLux C825 0.1/50V 3 2 POWER SUPPLY CHECK BY : 2008-01-23 DRAWN BY : OF 2 5 Rev : V01 1 A 5 2,4 4 3 2 +16V 8 6 2 7 4 6 4 5 R506 1M5 3KV C505 T501 1000p/50V SPW-080 1 3 op1 C508 NC 3 C506 12p/3KV 3 1 8.2K 1% 1 C503 NC 2 R510 2K 1% 1 R521 470 R515 1M 1% 13 SSTCMP 12 LCT 11 ISEN 5 PID 6 RSTR 7 RT OVPT 10 8 ENA VSEN 9 IC501 INL837 C529 1000p/50V 1 8 2 7 3 4 6 C526 NC 5 6 7 4 C523 12p/3KV 8 3 1 0.1/50V D511 SN4148 R518 470K 1% R537 10K 1% 3 D506 BAT54 C517 6800p/50V 1 IS1 2 IS2 C519 0.1/50V op2 C R527 910 1 R529 470 2 3 C525 270p/50V NC 1 D509 BAV99 2 C527 4700p/50V H CN504 4100-D02 L 1 3 D507 BAV99 IS2 2 C524 B R528 820 1% 2200p/50V R533 6K8 1% InnoLux Document Number : R538 10K 1% SIZE : doc APPRO BY : Custom TITLE : CHECK BY : Inverter B223W DATE : SHEET 4 H CN503 4100-D02 L R519 1M A 5 2 R531 2K 1% op1 D512 SN4148 R539 5K1 1% R523 820 1% R541 8.2K 1% C528 3p/3KV op2 R501 10K C518 0.01/50V R536 6K8 1% C530 T502 SPW-080 U502 AP9971GD D505 R526 SN4148 1M C520 ON/OFF 2 IS1 R525 1M5 3KV D508 BAV99 2 3 1 C522 1000p/50V H CN502 4100-D02 L 1 2200p/50V R520 5V 30K 1% B C514 4700p/50V 2 1 C515 2.2u/16V 220p/50V CT DIM 4 3 D504 BAV99 R530 33 C521 TIMER 14 270p/50V 15 3 R532 33 C512 R542 200K GNDA 0.047/25V R513 68K 1% VDDA 604K 1% C510 1000p/50V DRV2 2 R516 BRIGHTNESS DRV1 16 1000p/50V 2 R535 33 1 2 D503 1BAV99 3 C513 270p/50V NC + C531 470u/25V C507 2.2u/16V R512 10K C C509 3p/3KV 2,4 +16V R534 33 C516 R522 200K H CN501 4100-D02 L D 8 U501 AP9971GD R508 R507 3M3 1% 43K 1% 2 R524 910 D502 BAV99 R540 7 VCC5V C511 2 5V 1 R505 33 C504 1000p/50V D R517 33 R504 33 C501 470u/25V C502 2.2u/25V 2 1 3 DRAWN BY : 2008-01-23 3 OF 2 5 Rev : V01 1 A 5 4 3 2 +16V VCC16V C703 0.1/50V R701 10K Line_L 13 R733 220/NC VAROUT_R 2 VAROUT_L 4 + 220u/25V Right_Out C707 0 0 R731 7 Right_in R730 SVR + 14 C705 D ST-510 4 3 2 1 + 11 15 1 13a 4a 12a 3 2 12 4 13 CN701 1K 1K OUTR 220u/25V 470u/16V VOLUME 12 R706 R707 STBY 3 220/NC Left_Out OUTL GND GND 9 C711 4700p/50V 10K 10K 4K7 C710 4700p/50V R710 R709 C701 5K6 R708 10K + S_GND MUTE R732 4P 2.0mm 90° R719 2 PMBT3904 10u/25V C714 10u/16V 1 C715 + 220u/25V FB702 FERR BEAD R711 Q703 PMBT3904 1 MUTE 3 3 5K1 2 1K 3 2 Q704 R718 C 2 C 10 10K PMBT3904 R714 30K P702/NC Left_in 0.1/50V 1 1 10K Q702 1 R705 30K 2,3 C712 220u/25V C708 ESD R715 R703 R704 47K 6 C706 0.47/16V 1 INR 8 R717 VCC16V C702 220u/25V C709 ESD R702 D702 10K VS D701 C704 0.47/16V 5 INL NC 2 2 Line_R 600Ω +16V R734 0R2 1W + + U701 TDA8496SA D FB701 1 VCC16V 5K6 VCC5V 3 R712 VOLUME R713 100 1 Q701 PMBT3904 + C720 100u/16V Line_L 2 2 C716 0.1/16V Line_L VCC5V 1B1 12 4 2A VCC 11 5 GND 2S 10 6 2B0 2B1 9 7 NC NC 8 20K 1B0 R723 13 3 B HDMI_Audio_L 2 Pin6(1B1) HDMI Audio L input HDMI_Audio_R 2 20K 14 1S 20K VCC GND 20K 1A 2 Pin4(2B1) HDMI Audio R input Line_R R720 Line_R R727 0.1/50V FSA2257 VCC5V C719 VCC5V U702 1 R726 20K 20K Pin1(2B0) PC Audio R input R725 PC_Line_L R724 C7181u/16V 20K PC_Line_R R729 2 3 4 5 1 0 P701 AUDIO IN C7171u/16V Pin9(1B0) PC Audio L input R722 B R721 R728 20K 0 VCC5V Pin10,13 Connect to MCU GPIO to Switch PC_HDMI_Audio PC_HDMI_SWT 2 InnoLux A Document Number : APPRO BY : SIZE : doc Custom TITLE : CHECK BY : Audio_ BV223W 2007-12-12 DATE : SHEET 5 4 3 4 2 OF 5 DRAWN BY : Rev : V01 1 A 5 4 3 2 1 Pin Define 2x4p 2.0mm 180degree D CON CN302 CON CN301 IF CN102 2x4p 2.0mm 180degree 2x4p 2.0mm 90degree KEYPD CON 1x8p 1.25mm180degree 1 2 1 8 2 1 2 7 3 4 3 6 4 3 4 5 5 6 5 4 6 5 6 3 7 8 7 2 8 7 8 1 D C C CN302 CN301 1 2 MENU 1 2 RIGHT&Left 3 4 Auto 3 4 E-color 5 6 LED_A 5 6 GND 7 8 LED_G 7 8 POWER 2x4P 2.0mm 2x4P 2.0mm From IF BD To Keypad B B InnoLux Document Number : SIZE : doc APPRO BY : A TITLE : CHECK BY : Connector_ BV223W A 2007-12-12 DATE : SHEET 5 4 3 5 5 OF 2 DRAWN BY : Rev : V01 1 A Acer Acer –LCD-B223W 7.0 Assembly and Disassembly Sequence S1 S2 S3 Item Place panel Photo Procedures P/N Description (1).Take panel out of box and place it on the foam. LCP (2).Tear open the PE bag and put it in 22"MT220WW0 the designated carton. (3).Place panel on the foam like the 631102220091R 1-V0G1,AM2200001 attached picture. 001(INNO Remark:Do not touch the lamp cord and place the surface of panel downsides on the cushion. HRN ASSY 2x4P to 8P 430300801690R 245mm UL1571#28,RO HS Insert Keypay's wrie 1.Check if the keypad and relevent wire you choose are OK. 2.Insert the wire into the keypad like the Picture Fix front bezel 1.Check if there is any lacquer missed or ASSY,BEZEL,F sctratch happened to the front bezel. 714030015400R RONT,(silver),LE 2.Insert the fixed keypad into the front 22D3 bezel as picture 28 Acer Acer –LCD-B223W Assembly and Disassembly (continue) Assemble front bezel 1.Reverse the panel by 180 degree,put the surface of panel upsides and insert front bezel in the panel. 2.Reverse the panel by 180 degree using both hands,put the surface of panel downsides and make sure FFC interface is closer to operator. 714030015400R 3.Paste tinfoil on the position which refers to attached picture,in order to cover the gap in the panel completely. Remark:Make sure the fixed job is finished properly and lamp wire is closer to right hand;Make the tinfoil smooth in the corner of panel. ASSY,BEZEL,F RONT,(silver),LE 22D3 S5 Fix mainboar d (1).Insert FFC wire into its relevant interface of mainboard properly like attached picture1. (2).Insert the short keypad into its relevant interface like picture1. (2).Put the fixed mainboard in the right position. 791411300600R PCBA,I/F BOARD(V0,EME A,W/O),LE22D3 -612 R S6 Fix chassis &powebo ard Place the chassis on the cushion after check,like the attached Picture1. 701000007010R ASSY,CHASSIS ,W/DVI,LE22D3 S4 29 Acer Acer –LCD-B223W Assembly and Disassembly (continue) S7 Fix chassis &powebo ard Insert powerboard into the designated location of chassis ,like the attached Picture S8 Connect mainboar d&powerb oard Connent powerboard with the relevant PIN in the mainboard like the attached Picture S9 Twist PCBA screw Handle electric opener and one pcs of M3*6 screw 30 791411401600R PCBA,P/I BOARD,W /O SPK,LE22D2612 ROHS SCREW ,P,CRO 509146306200RSS,W /W AS,M3* 6,Zn-Cc Acer Acer –LCD-B223W Assembly and Disassembly (continue) 3 S10 4 Twist PCBA screw Fix 3 pcs of screws separately on the poweboard and mainboard like the attached Picture1 2 S11 S12 Twist screw for groundwire Paste FFC wire on the disignated location like the attached Picture Twist Hexagonal screws 4 3 2 1 (1). Handle hexagonal screws and electric opener (2). Twist screw in the interface like the attached Picture1. (3). Place cushion on the designated location after iron frame is taken away. 31 SCREW,P,CRO 509146306200RSS,W/WAS,M3* 6,Zn-Cc Acer Acer –LCD-B223W Assembly and Disassembly (continue) S13 S14 S15 Fix chassis Thread lamp wire into the relevant hole of chassis like the attached Picture Fix chassis 1)Fix chassis on the back of panel and front bezel 2)Put lamp wire and FFC wire in order as picture Insert FFC cable 1.Tear off the adhensive tape of FFC wire; 2.Insert FFC wire into the interface of panel 3.Put FFC wire in order and paste them on the panel 4.Fix chassis on the back of panel 1 S16 Insert light wire 2 3 4 1)Insert 4pcs light wire into the relevant position 2) put the balance light wire to the position as picture 32 Acer Acer –LCD-B223W Assembly and Disassembly (continue) make sure the red cabel in left S17 Insert keypad Cable 3 S18 Fix back cover 3 2 2 Fix stand Check if back cover is fixed properly 1 1 S19 1)Insert keypad wire into the relevant PIN in the keypad (2)Fix button on the relevant position of assemble (3)Confirm if keypad is inserted properly and make sure the red cable in left 4 3 1 Use 4pcs screw fix stand on the back of assemble like attached Picture 2 33
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 55 Has XFA : No XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:d456d2de-b9be-45b3-bc03-f65c245e4509 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2008:07:21 16:53:49+08:00 Modify Date : 2008:07:21 17:10:38+08:00 Metadata Date : 2008:07:21 17:10:38+08:00 Document ID : uuid:4fd2ead0-1dc5-4c44-9e95-4d2349cc51a6 Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools