Aclara Power Line Systems Y72140-1 Low Power Transmitter User Manual manual

Aclara Power-Line Systems Inc. Low Power Transmitter manual

Users Manual for Y 72140 1

Radiometrics Midwest Corporation (815) 293-0772 – info@radiomet.comUsers ManualEquipment Tested (Company, Model) FCC ID:DCSI, Y72140-1 PN3Y72140-1Instructions for Transmitters1. Mount RF transmitter module on side of structure with the cable going out the bottom of the unit. Thebattery should already be connected from the factory.2. Connect dial encoder.3. The RF module will “wake up” and detect the dial encoder within one hour and start to transmitinformation once an hour thereafter.4. Each transmission will take approx 0.48 seconds.NOTE: The RF transmitter module will not start transmitting data until the dial encoder is detected.NOTE: The RF module will transmit an internally generated dial encoder number once an hour as soon as thebattery is connected.NOTE: Changes not expressly approved by DCSI could void the user's authority to operate this equipment.

Navigation menu