Acon Biotech 001 On Call Bluetooth Adapter User Manual Manual

Acon Biotech (Hangzhou) Co., Ltd. On Call Bluetooth Adapter Manual

Manual

On Call ® Bluetooth® Adapter
User’s Manual (iOS)
REF G124-15A
English
Welcome, and Thank you for choosing the On Call® Bluetooth® Adapter.
On Call® Bluetooth® Adapter uses Bluetooth® Core Specification version 4.0
technologies for rapid build-up of simple links. Bluetooth® 4.0 version aimed at
very low power applications running off a coin cell with a long distance of data
transfer. Our On Call® Bluetooth® Adapter is intended for our On Call® Blood
Glucose Monitoring System (BGMS) users who want to monitor their glucose
levels remotely. In this manual The On Call® Bluetooth® Adapter provides a
wireless Bluetooth® connection between your Apple iOS mobile device and
your On Call® BGMS. So you can enjoy the comfortable and convenient data
processing after blood glucose data transfer.
Before using, read the instructions carefully.
Please refer to user’s manual of On Call® BGMS to learn about all the
components this Bluetooth® Adapter works together.
Use only On Call® BGMS and Apple iOS mobile device with the On Call®
Bluetooth® Adapter.
Keep out of reach of children.
On Call® Bluetooth® Adapter Overview
BGMS and Device Compatibility
On Call® BGMS: All On Call® meters with data transfer function.
Compatible devices: Apple iOS mobile device: iphone4s, iphone5, itouch4s and
itouch5
Replace the Battery
One CR 2032 3.0V Coin Cell Battery has been preinstalled in the adapter.
Please turn over the adapter and pull out the preinstalled insulation sheet to
start use.
The Red indicator light will flash when the battery is low, it can be used for only
very short time from then on, please replace the battery as soon as possible
according to the following steps:
1. Turn over the adapter and slide the battery cover off the adapter
2. Insert one CR 2032 3.0V coin cell battery into the battery carrier. Make sure
it is aligned with the Plus (+) side facing up.
3. Slide the battery cover back on and make sure that it snaps shut.
Note: Your battery will last longer if you remove it when you will not be using
your Bluetooth® Adapter for a month or longer.
Warning: Only use Lithium CR 2032 3.0V coin cell battery. Using any other
type of battery may cause an explosion.
Using your On Call® Bluetooth® Adapter
The On Call® Bluetooth® Adapter is designed to be simply operated with only
one control button. Button will provide alternative operations depending on the
color and the duration of the time they it is pressed.
1. Turning the Bluetooth® Adapter on and off
To turn the adapter on, press the button briefly.
The On Call® Bluetooth® Adapter will shut itself off automatically after finishing
the data transmission or 2 minutes after last action.
2. Pairing with your mobile device
Before you can start using the Bluetooth® adapter, you need to connect it to
your On Call® Blood Glucose Meter.
1) Inert the headphone plug of your Bluetooth® Adapter into the headphone
jack of your On Call® Blood Glucose Meter.
2) When the “PC” symbol appearing on screen of meter, it comes into data
transmission mode.
Note: If the meter does not show “PC” symbol, please refer to the relevant
User’s Manual of blood glucose meter and coordinate with meter buttons
to display the “PC” symbol on the screen.
3) Press button to start the automatic pairing with Bluetooth® Adapter and
iOS device.
Warning: Connect On Call® Bluetooth® Adapter ONLY to On Call® BGMS.
Connecting it to any other device may make your readings inaccurate or
damage one or both devices. Do not touch the metal part of the headphone
plug of the Bluetooth® Adapter by your hand.
3. Data transmission
1) After your iOS device finding and pairing with Bluetooth® Adapter, press
command of “receiving data” in iOS interface.
2) Meter is displaying “to” and “PC” to indicate the data transmission to
Bluetooth® Adapter, when the Green indicator light on Bluetooth® Adapter
flashes every 1 second.
3) When the Meter appears “End” and “PC” the pairing is complete.
4) The Bluetooth® Adapter is transferring date to iOS device when the Green
indicator light of the Bluetooth® Adapter flashes every 0.3 seconds.
Warning: Do not put the Bluetooth® Adapter on a metal surface or in a metal
box or enclosure. This may affect its ability to send data.
Indicator Light and Instruction Card
Indicator light
Work Mode
Green indicator light flashes every 1 second
Working mode
Green indicator light flashes every 0.3 seconds
Wireless transmission
Red indicator light flashes every 1 second
Low battery
Help Information
Aconlab: ACON Laboratories, Inc.
10125 Mesa Rim Road
San Diego, CA 92121, USA
Web: http://www.acondiabetescare.com
Phone: 1-858-875-8000
E-mail: DC.techsupport@aconlab.com.cn
Adapter Use and Precautions
1. Always store your On Call® Bluetooth® Adapter with power off and safely
protected.
2. Keep your adapter dry and avoid exposing it to extreme in temperature, keep
it away from heat and direct sunlight. Storage at high temperatures (above
45°C / 113°F) can degrade performance and reduce battery life. Storage at
low temperatures (down to –10°C / 14°F) will shorten battery life and may
affect operation.
3. Do not expose your On Call® Bluetooth® Adapter to water or other liquids.
4. Never operate this device in an area where there is a risk of explosion. Using
electrical equipment in the presence of flammable anesthetics or oxygen
may cause an explosion.
5. Do not take the adapter apart. Taking the adapter apart will void the
warranty.
Note: Follow proper precautions and all local regulations when disposing of the
Adapter and used batteries.
Maintenance
Your On Call® Bluetooth® Adapter does not require special maintenance or
cleaning. A cloth dampened with water and a mild detergent solution can be
used to wipe the outside the adapter. Take care to avoid getting liquids, dirt,
blood or control solution into the adapter.
On Call® Bluetooth® Adapter is a precision electronic instrument. Please handle
it with care.
Specifications
Feature
Bluetooth® Version
On/Off Source
Transmission Range
Transmission Data Time
Adapter Size
Adapter Weight
Storage Temperature
Operating Temperature
Operating Relative Humidity
Troubleshooting
What’s wrong?
Causes
Solutions
Green indicator light
doesn’t come
Battery is exhausted
Change battery
Cannot pair with
your iOS device
The Bluetooth® of your
iOS device is not in the
discoverable state
1. Confirm the Bluetooth® of
your iOS device is in
discoverable state
2. Restart the Bluetooth® of
your iOS device.
Red indicator flash
Battery voltage is too low
Change battery
Data cannot upload
from Meter to
Bluetooth®.
Connector is not
connected correctly or
improper meter type
used.
1. Reconnect the connector.
2. Confirm the meter type is
compatible.
Certification and Safety Approvals
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: To assure continued compliance, any changes or modifications
not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
The user must place the distance (20cm) or more from any personnel in
order to comply with FCC RF exposure requirements.
FCC ID: 2AA3K001
CE
This product is CE marked according to the provisions of the R & TTE Directive
(1999/5/EC).
Hereby, ACON declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
For further information please consult http://www.acondiabetescare.com
Please note that this product uses radio frequency bands not harmonized within
EU.
Bluetooth®
The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by ACON is under license. Other trademarks and
trade names are those of their respective owners. Bluetooth QD ID BXXXXXX
REFERENCES
Number: XXXXXXXXXX
Effective Date: 2013-XX-XX
Warranty
Please complete the warranty card that came with this product and mail it to
your local distributor to register your purchase.
If the adapter fails to work for any reason other than obvious abuse within the
first one (1) years from purchase, we will replace it with a new adapter free of
charge. For your records, also write the purchase date of your product here.
Date of purchase: _______________________________________________
Note:
i. This warranty applies only to the adapter in the original purchase, and
does not apply to the battery supplied with the adapter.
ii. Changes made to the product, unless expressly approved by ACON
could void the user’s license for and the warranty of the device.

Navigation menu