Acoustic Arc AAI-BH1410-00 ARC AUREM Bluetooth Earbuds User Manual 1

Acoustic Arc International Ltd. ARC AUREM Bluetooth Earbuds 1

User Manual

P/N: 95-08-BH1410US-02Material: 128g C2S折页：上、下对折（Logo 面朝外）折页成品尺寸：260* 125mm公差: +/- 1mm“L” mark for leftUSB ChargeQuickStartGuideContentsofthePackaging1.ARCAuremwirelessearbudsx2(L&R)2.USBtomircoUSBcable3.ARCEarhookforARCAuremearbudsx2(L&R)4.CarryingChargingCase5.Earcushionx2(LargeandSmallsize)IdentificationsPower Button“R” mark for rightManualPlease visit our website WWW.ARCSTORE.ME to download the full user manual, if anyWarnings/Caution/General InformationPlease check about warning information of the product container in separate sheets or check in our full manual before initial usage of the product.WarrantyPlease register warranty service at our website WWW.ARCSTORE.ME in 7 days after purchaseHotlinePlease get your support service at our Hotline : 1-844-ARC-7222Copyright © 2014 ARC All rights reserved.Get Ready To Use1. ARC Aurem two pieces earbuds have been paired during manufacturing. 2. Press and hold Power button of L earbud for 5 seconds,LED ring will turn from Blue/Red to fast flashing Blue.3. Turn on the Bluetooth device4. Select “ARC Aurem” in the Bluetooth device.5. Paired automaticall (Enter “0000” if password required) 6. Press and hold Power button of R earbud for 2 seconds,7. Play music at the Bluetooth devicePhone1. Make sure earbuds and cell are paired2. Dial at cell and talk with earbuds3. Accept incoming call by pressing Power button at L earbud4. Refuse incoming call, press Power button for 2 secondsRemark: Talk feature will only be activated on L earbuds.FCC ID: VHC-AAI-BH1410-00 BCLED ring will turn from Blue/Red to flashing Red.8. Adjust volume level on the Bluetooth deviceReset1. Turn the R earbud off2. Press Power button for 12 seconds to clear old memory and reset3. LED ring will flash between RED and BLUE three times4. Repeat the above procedures on L earbud.5. Start the processes of Pair processesPair (If not getting the earbuds start to work)1. In case paring is needed, do the following procedures.2. Press and hold Power button of L earbud 5 seconds, LED ring will turn from Blue/Red to fast flashing Blue. Do the same for R earbud.3. Fast press Power button of L earbud and LED ring turns to Red. Slow press Power button twice of R earbud and LED ring turns toBlue/Red. Both LED rings will flash slowly in Red when they are paired. 4. Press Power button of L earbud for 2 seconds to turn it off. Turn it on again by pressing Power button for 5 seconds until LED ring flashes fast in Blue.5. Turn on Bluetooth device and choose “ARC Aurem” for pairing.6. LED rings flash slowly in Blue at L earbud ,and LED rings flash slowly in Red 7. LED rings flash slowly in Blue at both L & R earbuds when getting music to both L & R earbuds. at R earbud when pairing with Bluetooth device is completed. 8. Adjust volume level on the Bluetooth device“The rating plate is located at the bottom enclosure of the apparatus.” “ Battery shall not be exposed to excessive heat such as sunshine, fire or the like” Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. “ Warning for lithium battery”ity This device complies with part 15 of the FCC Rules.

Navigation menu