Acoustic Arc AAI-BS0950-00 Bluetooth Waterproof Speaker User Manual Hinge Hook

Download:
Mirror Download [FCC.gov]
Document ID	1893112
Application ID	IbHwKa9LHuupSwZnBOG97Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	189.52kB (2368999 bits)
Date Submitted	2013-02-04 00:00:00
Date Available	2013-08-02 00:00:00
Creation Date	2013-01-30 17:37:15
Producing Software	OpenOffice.org 3.2
Document Lastmod	2013-02-04 12:28:05
Document Title	Hinge Hook
Document Creator	Writer
Document Author:	rimbackp

Bluetooth Waterproof Speaker
BS0950US / 8007332
Instruction Manual
A. INTRODUCTION
This Bluetooth wireless speaker system applies the latest BT 3.0 wireless technology platform
that enables you to enjoy music, video everywhere you want.
B. FEATURES
1. Bluetooth 3.0 Platform
2. Operating distance up to 10 meters / 33 feet (open area)
3. Powered by 6x AA alkaline batteries (included)
4. IPX 3 Water-proof feature
5. Floating feature
6. Blue mood light
C. PACKIANG
1 X Bluetooth speaker
1 X User manual
6 X AA size alkaline batteries
D. COMPONENT IDENTIFICATION
Insert batteries in correct direction
1. Power On/Off Control
2. Power LED Indicator
3. Pair
4. Mood Light
5. Volume +
6. Volume –
7. Batteries door
E. PAIRING
1. Press the power button for 3 seconds to turn the speaker on, the Blue LED light will flash
slowly.
2.
Enable your Bluetooth device such as cell phones, tablets or other Bluetooth media, and
make sure it is in searching mode.
3.
The Bluetooth speaker will automatically search your Bluetooth device and pair it up.
4.
If no auto pairing connection is made, press the Pair button and hold for 5 seconds until the
Blue LED flashes quickly.
“PAIR”
5. Select “inStudio8007332” in the list shown in the Bluetooth device.
6. Enter “0000” if password is required.
7. When Bluetooth connection is made, the Blue LED will be solid.
8. Listen to your music.
CAUTION: Your speaker will operate best and loudest with no water resting on top of the speaker. Periodically
draining the speaker by inverting it will ensure that not too much water remains standing on top of the speaker
driver. Turn the speaker over and lightly shake it to let the water drain out quickly for best audio performance
and when storing the speaker between uses.
When you find the floater with low volume or no volume in the water, it might because the floater fills in with too
much water on top of the speaker driver, which prevents the driver from producing sound. Reverse the floater,
drain out the water. After that, the floater will work properly again.
Water outlet
F. TECHNICAL SPECIFICATIONS
Carrier Frequency
Power Requirements
Frequency Response
Distortion
S/N Ratio
Operation Distance
Output Power
: Bluetooth 3.0
: By 6x AA alkaline batteries (included)
: 30Hz – 18KHz
: <0.5%
: 65dB (typical)
: Up to 10 meters / 33 feet (open area)
: 5W (Max)
NOTES: This speaker is in compliance with the specified Bluetooth version. It does not guarantee
compatibility of all functions on every Bluetooth enabled device. Please check with your mobile
phone's user manual for compatibility and functionality.
G. TROUBLE SHOOTING
NO SOUND
- The speaker’s battery charge is too low. Replace with the new batteries.
- Ensure the speaker is ON.
- Ensure Bluetooth device is ON.
- The volume of speaker is too low, adjust the volume to an appropriate level.
- Unable to connect with Bluetooth device, restart the pairing process.
- The speaker may be too far away from the Bluetooth device，move closer to it.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: Clean the speaker with soft, lint - free, dry cloth. Never use detergents or abrasive cleaners
to clean.
THE FCC WANTS YOU TO KNOW
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
“Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.”
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject
to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of
the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
The Bluetooth word, mark and logo are owned by Bluetooth SIG, Inc. Any and all other
trademarks and trade names are those of their respective owners.
This equipment should be installed and operated with a minimum distance of 20 centimeters
between the radiator and your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Language                        : zh-CN
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : rimbackp
Title                           : Hinge Hook
Create Date                     : 2013:01:30 17:37:15+08:00
Creator Tool                    : Writer
Modify Date                     : 2013:02:04 12:28:05+08:00
Metadata Date                   : 2013:02:04 12:28:05+08:00
Producer                        : OpenOffice.org 3.2
Document ID                     : uuid:404a685a-8517-45e6-9b48-405db16bc8c0
Instance ID                     : uuid:c16aa8c5-fab6-497b-a2ac-7e5c3cd5bacc
Page Count                      : 6
Author                          : rimbackp

EXIF Metadata provided by EXIF.tools