Acoustic Arc AAI-BT1210-00 Bluetooth Headphone User Manual Exhibit 08 Users Manual

Acoustic Arc International Ltd. Bluetooth Headphone Exhibit 08 Users Manual

Exhibit 08 Users Manual

BLUETOOTH HEADPHONEBT1210USINSTRUCTION MANUAL
INTRODUCTIONThis Bluetooth wireless headphone applies the latest BT 2.1 wireless technology platform that enables you toenjoy music and video and cell phone handsfree calling anywhere inside or outside your home.A. PACKAGING1. Bluetooth stereo headphone2. 2.5mm to USB charging cable3. 3.5mm to 3.5mm audio cableB. FEATURES1. Bluetooth 2.1 Platform2. A2DP profile3. Hands free telephone calling4. Stereo music5. Operating distance up to 10 meters6. Auto Shut-Off7. Operation time upto 12 hours (median volume level)
C. COMPONENT IDENTIFICATIOND. PAIRING1. Press the Power button, LED On and hold pressing until LED flashes.2. Enable your Bluetooth device such as cell phones, tablets or other BT media, and make sure it is atsearching mode.3. When Bluetooth connection is made, the LED will flash slowly.4. listen your music or make/take your telephone call on the headphoneE. CHARGING1. Make sure the headphone is fully charge before initial use.2. Connect headphone with your PC by the supplied 2.5mm to USB cable for charging.3. Charging is workable to connect with other power adapter with USB jack at 5V 1A specifications.4. The charging LED will illuminate when charging is under processing. Charging will be finished when LEDbecomes Green.1. Power LED Indicator2. Power / Pair / Talk3. Volume+, Volume -4. 3.5mm Audio In Jack5. Volume +2.5mm Charge in Jack6. Microphone
F. Telephone Call1. If there is an incoming call when streaming music on headphone, the music will be muted and ring tone willbe heard.2. Take your call by pressing the Power/Pair/Talk button. Press once again when ending the call. Music willcome out again automatically.3. To make a call, simply dialing at your cell phone, and talk at the headphone.*Check the instruction manual for your cell phones, if getting any process different from the above.G. LINE-IN1. Connect the headphone with your audio device directly by the supplied 3.5mm cable2. The Bluetooth wireless music will be by pass after line-in connection is made
H. TECHNICAL SPECIFICATIONSCarrier Frequency : Blue Tooth 2.1Battery Capacity : 3.7V 470mA via built-in Lithiumrechargeable batteryFrequency Response:20Hz–20KHzDistortion : 0.5%S/N Ratio : 65dB (typical)Channel Separation : 50dB (Typical)Operation Distance:Up to 10 meters (open area)K. TROUBLE SHOOTINGNO SOUND Ensure the headphone is charged and with enough power for operation Ensure the headphone is switch ON. Ensure BT device is ON. The volume of speaker is too low, adjust the volume to an appropriate level. Unable to connect with Blue Tooth device, RESET the headphone by pressing and holding thePower/Pair/Talk for 12 seconds.WARNING : Changes or modifications to this unit not expressly approved by the party responsible forcompliance could void the user’s authority to operate the equipment. Operation is subject tothe following two conditions: (1) this device may not cause interference, and (2) this device mustaccept any interference, including interference that may cause undesired operation of thedevice.Battery warning:Caution: Danger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.Safety warning:Battery shall not be exposed to excessive heat such as sunshine, fire or the like.1. Do not covering the ventilation.2. No naked flame sources, such as lighted candles, should be placed on the apparatus.3. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.4. No objects filled with liquids, such as vases, shall be placed on the apparatus.5. The apparatus shall not be exposed to dripping or splashing.6. The On/Off switch is a secondary functional switch and not for disconnection of the mainssupply.7. Do not dispose of electrical products in the general waste and ensure the used product or batteries aredisposed safely according to your local authority and regulations.8. No replaceable parts inside, repair work should be carried out by manufacturer or authorized agent.9. The risks of hearing impairment due to exposure to music or other sounds may be reduced by listening atlower volumes and for shorter durations.
10. Warning: Listening at high volumes from earphones and headphones can cause hearing loss.11. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.FCC STATEMENT:This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and(2) this device must accept any interference received, including interference thatmay cause undesired operation.NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a residentialinstallation. This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guarantee that interferencewill not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one ormore of the following measures:—Reorient or relocate the receiving antenna.—Increase the separation between the equipment and receiver.—Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected.—Consult the dealer or an experienced radio/TV technician for help.Changes or modifications not expressly approved by the party responsible for compliancecould void the user’s authority to operate the equipment.IC STATEMENT:This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subjectto the following two conditions:(1) this device may not cause interference, and (2) this device must accept anyinterference, including interference that may cause undesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditionssuivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur del'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillageest susceptible d'en compromettre le fonctionnement.This ClassB digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classeB est conforme à la norme NMB-003 du Canada.IC: 255A-8003763

Navigation menu