Acoustic Arc AAI-DH1150-00 2.4GHz Wireless Headphone System (Transmitter) User Manual DH115UST

Download:
Mirror Download [FCC.gov]
Document ID	1735116
Application ID	pKQOCPqieJ9VD0TrIA6x9w==
Document Description	DH115UST User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.62kB (407739 bits)
Date Submitted	2012-07-03 00:00:00
Date Available	2012-12-29 00:00:00
Creation Date	2012-06-15 16:34:16
Producing Software	pdfFactory 3.18 (Windows XP Home Chinese)
Document Lastmod	0000-00-00 00:00:00
Document Title	DH1150US FCC IC 認證 User Manual 13-JUN-2012.doc
Document Creator	pdfFactory www.pdffactory.com
Document Author:	Owner

2.4GHz Wireless/Wired Headphone
DH1150US (Transmitter:DH115UST, Receiver:DH115USR)
8003764
Instruction Manual
PDF created with pdfFactory trial version www.pdffactory.com
INTRODUCTION
Thank you for purchasing this system!
This 2.4GHz stereo wireless
headphone system offers you advances in wireless transmission technology so
that you can listen to ultra stereo sound from your audio components upto 50
meters.
The transmitter is compatible to any audio sources, say DVD player,
CD player, i-pod, MP3, TV set, VCR, Hi-Fi system or radio.
FEATURES
1. 2.4GHz FHSS Digital technology.
2. High quality stereo sound that is virtually interference-free.
3. Transmission is not restricted solely to line of sight
4. Digital Pairing System on Headphone & Transmitter
5. Electronic Volume Control on Headphones
6. Low Power indicator on headphone
7. Automatic battery recharging
8. Auto Shut-off on headphone
9. Auto On/Off RF function on transmitter
10. 3.5mm Line in feature for corded headphone application (1.5 meters)
11. Operating distance up to 50 meters
PACKAGING
1. RF receiver headphone
2. RF transmitter
3. 6V 300mA power adapter
4. 3.5mm to 3.5mm cable (1.5 meters)
5. 3.5mm jack to RCA cable
6. Instruction Manual
PDF created with pdfFactory trial version www.pdffactory.com
INSTALLATION
TRANSMITTER
POWER SIGNAL
1. Connect the mains adapter provided to an electrical outlet.
2. Connect the mains adapter to the DC IN input connector located on the transmitter
rear panel.
3. Use the audio cable attached with the transmitter to connect audio outputs on audio
sources like TV set, Hi-Fi system, ipods, VCR or radio-cassette player.
4. Turn the switch to ON and the Green LED indicator will light up. The Blue LED
indicator will light up when audio source is on. If the Blue indicator led remains off,
switch on the audio source and increase its output level until the Blue indicator light
comes on.
PDF created with pdfFactory trial version www.pdffactory.com
HEADPHONE RECEIVER
1.
Power LED Indicator
2.
Power Key
3.
Vol+, Pair, Vol-
4.
3.5mm Audio In Jack
①
②
③
④
Press the Power button on the right hand side Headphone ‘cup’for 3seconds to turn
the wireless function on - the Blue LED light will flash.
The headphones are now linked up (paired*) with the Dongle and the Blue LED light
will be on continuously.
OPERATIONS
To start up this system and enjoy the music, please take following steps:
1.
Connect the power adapter between the transmitter and wall outlet., the LED on the transmitter will
light up in green.
2.
Connect the transmitter with your audio source, turn the source ON, the LED will turn from Green to
Blue.
3.
Turn on the headphone receiver by pressing ON/OFF switch, LED will then be Blue flashes.
4.
If the LED on the headphone is OFF immediately, please put the headphone back to the transmitter for
recharging.
5.
When the audio link is established, LEDs turns to Blue
and music comes out.
6.
If the LED on the headphone remains in Blue flashes, please check with troubles shooting processes.
7.
When listening is ended, turn OFF the headphone.
PDF created with pdfFactory trial version www.pdffactory.com
NOTE:
If the LED on headphone remains in Blue flashes and does not work, start Pairing
process by pressing the Pair button for 3 seconds on the transmitter and the headphone
simutaneously until the Blue LEDs flash. The LEDs will change to solid Blue when pairing
process is finished.
To both protect the transmitter and save power, the transmitter will automatically switch
off after approximately 4 minutes if there is no audio signal, or the signal that it receives
from the audio source is too weak for proper reception. If however the signal returns to
an acceptable level, then the transmitter will automatically switch back on.
The headphone receiver will automatically shut off if getting no signal from transmitter in
15 minutes.
PDF created with pdfFactory trial version www.pdffactory.com
CHARGING THE BATTERIES
1.
Switch OFF the receiver headphone.
2. To recharge the headphone batteries, place the headphone on the
transmitter, taking care to ensure that the charge contacts touch the
transmitter's charge pins and the LED on the headphone will light up in red
when charging is finished the headphone LED will be green.
3. Be sure to charge new batteries for 12 hours before using them for the first
time in the headphones.
The red indicator light will be on continuously during
battery charging.
PDF created with pdfFactory trial version www.pdffactory.com
Wired Headphone Application
The headphone can be applied in corded mode. Simply connect the headphone and the
audio source by the supplied 1.5 meters audio cable. You will then enjoy the audio in
wired mode.
WARNINGS:
**
Never use another type of battery or non-rechargeable batteries to replace the
rechargeable batteries. When the headphones are not in use, switch OFF the
headphones to avoid damaging the batteries.
**
The batteries must be fully charged before first use. An initial 5 hours charge is
required to guarantee an acceptable service life for the rechargeable batteries. Always
ensure that the headphones are switched to the OFF position while the batteries are
charging.
**
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference that
may cause undesired operation of the device.
PDF created with pdfFactory trial version www.pdffactory.com
Battery warning:
Caution: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Safety warning:
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
a. Do not dispose of electrical products in the general waste and
ensure the used product or batteries are disposed safely
according to your local authority and regulations.
b. No naked flame sources, such as lighted candles, should be
placed on the apparatus
c. No objects filled with liquids, such as vases, shall be placed on the apparatus
d. No replaceable parts inside, repair work should be carried out by
manufacturer or authorized agent
e. Warning: Listening at high volumes from earphones and headphones can
cause hearing loss.
IMPORTANT
**
This unit should be operated with rechargeable batteries only. When
replacing the batteries or when disposing of the unit, always comply with
applicable laws relating to the disposal of batteries. Please place them in a
proper disposal container to ensure that they are eliminated safely and in an
environmentally-friendly way.
PDF created with pdfFactory trial version www.pdffactory.com
TECHNICAL SPECIFICATIONS
Transmission mode
: 2.4GHz digital FHSS stereo
Carrier frequency
: 2.4GHz
Operating voltage
: Transmitter 6 V 300 mA
Receiver 3.7V 470mA via built-in
Lithium rechargeable battery
Frequency response
: 20 Hz – 20 KHz (electrical)
Distortion
: 0.5 %
Signal-to-noise ratio
: 75 dB
Channel separation
: 60 dB
Range
: 50 meters (open area)
PDF created with pdfFactory trial version www.pdffactory.com
TROUBLESHOOTING
NO SOUND
- Ensure that the mains adapter is pushed fully into the power outlet and that its cable is
properly connected to the DC IN 6V connector on the transmitter.
- Ensure that the headphones On/Off switch is switched to the On
- The headphones battery charge level may be too low. Recharge the batteries or
replace them with fully charged batteries.
- Ensure that your DVD, TV set, Hi-Fi system or audio component is switched on and set
to a channel that broadcasts an audio signal.
- Use the headphones volume control to increase the sound level (only when use as a
wireless headphone).
- The audio signal input level is too low. Increase the volume from the audio source of
Hi-Fi, CD, or TV, etc.
- The connected audio/video equipment may not be in playback mode. Start playback on
by the equipment.
- The headphones output level is set too low. Adjust the volume to a suitable level.
DISTORTION
- Restart the Pairing process. Press the “Pair” button 3sec on the transmitter and the
headphone. The process is finished when both LEDs are in Blue.
- The headphone’s batteries charge level may be too low. Recharge the batteries
- Ensure that the volume knob setting is correct.
- The headphones may be too far away from the transmitter. Move closer to it.
- The audio signal input level is too low. Increase the volume from the audio source of
Hi-Fi, CD, or TV, etc.
10
PDF created with pdfFactory trial version www.pdffactory.com
1. Do not covering the ventilation.
2. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
3. Battery shall not be exposed to excessive heat such as sunshine, fire or the
like.
4. No objects filled with liquids, such as vases, shall be placed on the
apparatus.
5. The apparatus shall not be exposed to dripping or splashing.
6. The On/Off switch is a secondary functional switch and not for disconnection
of the mains supply.
7. Do not dispose of electrical products in the general waste and
ensure the used product or batteries are disposed safely
according to your local authority and regulations.
8. No replaceable parts inside, repair work should be carried out by
manufacturer or authorized agent.
9. The risks of hearing impairment due to exposure to music or other sounds
may be reduced by listening at lower volumes and for shorter durations.
10. Warning: Listening at high volumes from earphones and headphones can
cause hearing loss.
11. Caution: Danger of explosion if battery is incorrectly replaced. Replace only
with the same or equivalent type.
11
PDF created with pdfFactory trial version www.pdffactory.com
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
12
PDF created with pdfFactory trial version www.pdffactory.com
IC STATEMENT:
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subjectto the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the
device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage
est susceptible d'en compromettre le fonctionnement.
This ClassB digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classeB est conforme à la norme NMB-003 du
Canada.
IC: 255A-8003764
13
PDF created with pdfFactory trial version www.pdffactory.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Title                           : DH1150US FCC IC 認證 User Manual 13-JUN-2012.doc
Author                          : Owner
Creator                         : pdfFactory www.pdffactory.com
Producer                        : pdfFactory 3.18 (Windows XP Home Chinese)
Create Date                     : 2012:06:15 16:34:16+08:00
Page Count                      : 13

EXIF Metadata provided by EXIF.tools