Acrowave Systems AVP-2000B IP Phone System (Handset) User Manual
Acrowave Systems Co., Ltd IP Phone System (Handset)
users manual
WiFi VoIP Phone WiFi SIP VoIP Phone AVP-2000B Users Manual Copyright® 2005-2006 Acrowave Systems Co,Ltd. All rights reserved WiFi VoIP Phone -- INDEX -1. OVERVIEWS 1.1 LCD DISPLAY 1.1.1 Pictograms on LCD 1.1.2 Key Buttons 2. AVP-2000B MENU TREES 2.1 BASIC MENU TREE 2.2 PHONEBOOK MENU TREE 2.3 MESSAGE MENU TREE 2.4 INCALL SOFT MENU TREE 3. OPERATIONS 3.1 POWER ON / OFF 3.1.1 Power On 3.1.2 Power Off 3.2 SIP REGISTRATION / UNREGISTRATION 3.2.1 Registration 3.2.1 Unregistration 11 3.3 CALL MAKING / ANSWERING / HANGUP / DND 12 3.3.1 Making Call 12 3.3.2 Answering Call 12 3.3.3 Hangup Call 12 3.3.4 DND Call 12 4. PHONE FUNCTIONS 13 4.1 MENU DESCRIPTIONS 13 4.1.1 RING / BELL 13 4.1.1.1 Ringing Type 13 4.1.1.2 Ring Color 13 4.1.1.3 Ring Volume 13 4.1.2 PHONE DIARY 14 4.1.2.1 Alarm 14 4.1.2.2 Calculator 14 4.1.3 USER SETUP 14 4.1.3.1 Standby Display Mode 14 4.1.3.2 LCD Contrast 15 WiFi VoIP Phone 4.1.3.3 LCD Backlight 15 4.1.3.4 Auto Answering 15 4.1.3.5 Localization 15 4.1.3.6 Call Prefix 16 4.1.3.7 Call Forward 16 4.1.3.8 Call Waiting 16 4.1.3.9 Password Change 17 4.1.3.10 Ring-Back Tone Mode 17 4.1.3.11 DTMF Mode 17 4.1.4 ADMIN SETUP 17 4.1.4.1 Networks 18 4.1.4.2 SIP 18 4.1.4.3 Wireless LAN 18 4.1.4.4 NAT 20 4.1.4.5 CODEC 21 4.1.4.6 Initializaionz 22 4.1.4.7 Ping Test 22 4.2 INPUT CHARACTERS 23 4.3 PHONEBOOK 24 4.3.1 OUTBOUND CALL 24 4.3.2 INBOUND CALL 24 4.3.3 SEARCH PHONEBOOK 25 4.3.4 ADD NEW ENTRY 25 4.4 MESSAGE 26 4.4.1 RECEIVED MESSAGE 26 4.4.2 SEND MESSAGE 26 4.5 SOFT MENUS 28 4.5.1 PHONEBOOK 28 4.5.2 CALL MUTE 28 4.5.3 CALL TRANSFER 28 4.5.4 CALL HOLD 29 4.5.5 CALL WAIT 29 WiFi VoIP Phone This page is blank area. WiFi VoIP Phone 1. OVERVIEWS 1.1 LCD DISPLAYS 1.1.1 Pictograms on LCD 아이콘 설 명 WiFi Signal Strength. : Weak : Strong Out of Service area. Indicates in call state Indicates alarm is on. Indicates that there is/are new message(s) that has/have not been read. Indicates vibration mode or manner mode is on Indicate key-lock state is on Battery life gauge : Full : Sufficient : Shortage 1.1.2 Key buttons 버튼 이름 기 능 Send or Receive [M] Menu Upper direction Down direction Right direction / Message Menu Left direction / Phonebook Menu [ S] OK / Selection [ CLR ] Cancel Key [0]~[9] Number / Character input Keys [*] Symbol Key / Manner Mode [#] Symbol Key / Keylock Mode Power On / Off / Cancel : Empty WiFi VoIP Phone 2. AVP-2000B MENU TREES This chapter shows the menu trees of AVP-2000B 2.1 BASIC MENU TREES MENU 1.SOUND 1.RING TYPE 2.RING COLOR 1.RING 2.VIBRATOR 3.RING AFTER VIBRATOR 4.RING WITH VOBRATOR 1.RING COLOR 1 2.RING COLOR 2 3.RING COLOR 3 4.RING COLOR 4 5.RING COLOR 5 3.RING VOLUME 2.DIARY 1.ALARM SETTING 1.SET ON/OFF 2.SET TIME 3.SET BELL TYPE 1.ALARM ON 2.ALARM OFF 1.RING COLOR 1 2.RING COLOR 2 3.RING COLOR 3 4.RING COLOR 4 5.RING COLOR 5 2.CALCULATOR 3.USER SETUP 1.DISPLAY TYPE 2.LCD CONTRAST 3.LCD BACKLIGHT 4.AUTO ANSWER 5.LOCALIZATION 1.NUMBER MODE 2.LOGO MODE 1.ALWAYS OFF 2.10 SEC ON 3.20 SEC ON 4.ALWAYS ON 1.DISABLE 2.AFTER 1 BELL 3.AFTER 3 BELL 1.LANGUAGE 2.TIME SERVER 3.TIME ZONE 4.DST SETUP 6.CALL PREFIX 7.CALL FORWARD 8.CALL WAITING 9.PASSWORD CHG 0.DTMF *.RINGBACK TONE 1.CALL FWD OFF 2.CALL FWD ON 1.DISABLE 2.ENABLE 1.SIP INFO 2.INBAND 1.ENABLE 2.DISABLE 1.ENGLISH 2.KOREAN 1.DST ENABLE 2.DST DISABLE 1.FORWARD NUMBER 2.CONDITION WiFi VoIP Phone 4.ADMIN SETUP 1.NETWORK 2.SIP SETUP 2.WLAN 1.DHCP 2.STATIC IP 1.AP SELECT 2.SECURITY PHONE ADDRESS NET MASK GATEWAY IP 1.SCAN AP 2.INPUT DIRECT 1.DISABLE 2.ENABLE 1.64 BITS 1.ASCII 2.HEXA 1.ASCII 2.HEXA 2.128 BITS 3.802.1X 4.ROAMING 5.CONNECTION 4.NAT 1.NAT DISABLE 2.NAT ENABLE 1.DISABLE 2.ENABLE 1.ENABLE 2.DISABLE 1.INFRA STRUCT 2.AD-HOC 1.STUN SETUP 2.STATIC NAT 5.CODEC 6.INITIALIZE 1.G.711 2.G.711+G.723 3.G.711+G.729 4.G.711+G.726 1.SOFT RESET 2.RESET PARAM 3.FACTORY RESET 1.YES 2.NO 1.YES 2.NO 7.TEST MODE 5.INFORMATION 1.PING TEST 2.RF TEST 1.VERSIONS 2.NETWORK 3.SIP 4.CODEC 5.WLAN 6.MAC ADDRESS 1.RF Tx TEST 2.RF Rx TEST USER ID PASSWORD STUN SERVER STUN PORT WiFi VoIP Phone 2.2 PHONEBOOK MENU TREE PHONEBOOK 1:OUTBOUND Î MENU 1:DEL 2:DEL ALL Î MENU Î OK 1:DEL 2:INBOUND CALL Î MENU 1:DEL 2:DEL ALL 3:SEARCH Î MENU Î OK 1:EDIT 2:DELETE Î MENU Î EDIT Î Î Î SHORT NUMBER 4:NET ENTRY NAME PHONE NUMBER 2.3 MESSAGE MENU TREE MESSAGE 1:SHOW MESSAGE 2:SEND MESSAGE 1:WRITE MSG 2:SHOW SENT MSG Î MENU 1:DEL 2:DEL ALL Î CONTENTS Î 2,4 INCALL SOFT MENU TREE MENU Î 1: PHONEBOOK 2:CALL MUTE 3:CALL TRANSFER 4:CALL HOLD 1:OUTBOUND CALL 2:INBOUND CALL 3:SEARCH Î XFER NUMBER MENU 1:RESENT 2:DEL WiFi VoIP Phone 3. OPERATIONS This chaper describes how to operate and configure the AVP-2000B WiFi Phone. 3.1 POWER ON / OFF 3.1.1 Power On Press [ ] button during 2 or 3 seconds to power on the AVP-2000B, then AVP-2000B turn on the power with short beep sound. 3.1.2 Power Off Press [ ] button during 2 or 3 seconds to power off the AVP-2000B, then AVP-2000B turn off with “Good-Bye” message on LCD windows. 3.2 SIP REGISTRATION / UNREGISTRATION 3.2.1 REGISTRATION AVP-2000B can use after SIP registration operation on SIP REGISTRAR SERVER. The operations of SIP registration are as below ; 1) Press [M] button in standby state. 2) Select “4.Admin Setup” menu. 3) Default password is “0000”. 4) First, select “1. Setup Network” menu and configure the network informations. AVP-2000B supports two kind of IP address mode which are DHCP mode and Static IP address mode. When used as Static IP address mode, SubNet Mask value and Default Gateway Address are also needed. (Refer to clause 4.2 how to input IP address) 5) Select “2. Setup SIP” menu and configure the SIP informations. AVP-2000B need some SIP informations to make / receive call. - SIP Phone Number - Administrator will be supported - SIP Registrar Server IP Address - Administrator will be supported - SIP Domain Name – Administrator will be supported. (SIP Registrar Server IP Address will be used as default value - SIP Authenticate Name – Administrator will be supported if not supported.) WiFi VoIP Phone (Press [S] button to skip this value) - SIP Authenticate Password – Administrator will be supported (Press [S] button to skip this value) - SIP Registration Expire Time – Administrator will be supported (Default value is 3600 seconds) 6) Select “3.Setup WLAN” menu and configure the WLAN informations Input the SSID of AP(Access Point), Encryption mode of WiFi, Security configure, Roaming mode and Connection mode of WLAN in this mode. - SSID of AP : Scanning Mode and Direct input mode - Encryption Mode : Configure Static WEP key value of AP when using Encryption mode. - 802.1x Security : Configure security informations when using Security mode. - Roaming mode : Select Roaming state of AVP-2000B (Default is disable) - Connection mode : Select WiFi Connection mode (Default is Infra-structure mode) 7) Select “4.Setup NAT” menu and configure the NAT informations when needed. (AVP-2000B supports two kind of NAT mode, one is STUN protocol and the other is Static NAT. Administrator will be support for about this operation.) - STUN Mode Administrator can supports STUN server IP address and port value. Default value of STUN server IP address is same as SIP Registrar Server IP address and value of STUN port is 3478. - Static NAT Some kind of Route Server can not support dynamic allocation of port number. In this case, select “Static NAT” mode to operate normally. 8) Select “5.Setup CODEC” menu if need to change. AVP-2000B supports G.711 a/mu – law and G.729ab mode CODEC as default. 9) Press [ ] button to save and reboot AVP-2000B AVP-2000B will reboot and register on SIP Registrar Server. 10 WiFi VoIP Phone 3.2.2 UNREGISTRATION The unregistration of AVP-2000B Phone means that administrator or user is to remove registration for AVP-2000B on purpose using already registered on SIP registration server. Following both the means provide removing information in phone registered on SIP registration server. 3.2.2.1 Phone Power Off AVP-2000B Power Off is to remove registered information in AVP-2000B registered on SIP registration server. 3.2.2.2 Phone Factory Initialization Initializing phone setup figures is to remove registered information from SIP registration server and initialize all figures of AVP-2000B. [Using Method] [Menu] Î [4.Administrator setup] Î [6.Initialization setup] Î [3.Factory Initialization] 3.3 Call Making / Answering / Hangup / DND 3.3.1 Making Call There is 3 ways to make a call with AVP-2000B Phone. 1) At registered state of AVP-2000B on SIP server, (If registered, LCD window shows registered phone number) press the phone number you want to make a call and press button[ ] and then the phone is called. 2) In case that there is the shortened number registered in the phone book, press the number a long while and then automatically you can make a call to the stored number in shortened number. 3) In standby state, press button [ ] and then there appears previous calling list. After you choose number in the list you want with the use of direction key [ Button [ ] and then you can make a call to the relevant number. 11 ] , press WiFi VoIP Phone 3.3.2 Answering Call AVP-2000B phone is ringing and its LCD window shows sender’s phone number. At this time, press some button except button [CLR] [Power/Off] and then the phone is connected with the sender’s. 3.3.3 Hangup Call To finish calling in AVP-2000B, press button [Power/Off] once and then call is finished. For 3 seconds, call time is indicated. 3.3.4 DND Call If you do not want to answer the phone after checking sender’s phone number when AVP-2000B rings, press button [Power/Off] and then the phone is disconnected. At the same time, “Denied Call” message is transmitted to the sender. 12 WiFi VoIP Phone 4. Phone Functions 4.1 Menu Descriptions AVP-2000B provides each menu for setup of each function. The composition of whole menu is <1.Menu Tree> Each function is described as follows : 4.1.1 Ring/ Bell Ring/ Bell menu of AVP-2000B provides 3 kinds of function listed below : 1. Ringing Type 2. Ring Color 3. Ring Volume 4.1.1.1 Ringing Type This mode is for setup about how AVP-2000B operates when phone is called. Phone Bell, Vibration, Bell after Vibration, Vibration + Bell By using direction key or figure key [ ], they can be selected. [Using Method] [Menu] Î [1:Ring/Bell] Î [1:Ringing Type] Î [1:Phone Bell] 4.1.1.2 Ring Color This menu is for setup about Ring Color when phone is called, AVP-2000B have 5 kinds of Ring Color to be selected. By using direction key or figure key [ ], they can be selected. [Using Method] [Menu] Î [1:Ring/Bell] Î [2:Ring Color] Î [1:Ring Color 1] 4.1.1.3 Ring Volume This is for setup about Ring Volume when phone is called By using direction key or figure key [ ], they can be selected. [Using Method] [Menu] Î [1:Ring/Bell] Î [1:Ring Volume Type] Î [3:Ring Volume] 13 WiFi VoIP Phone 4.1.2 Phone Diary AVP-2000B provides functions of alarm and calculator for user’s convenience. 4.1.2.1 Alarm This is to provide user with sound of bell by AVP-2000B at setting time with alarm setup. By using direction key or figure key [ ], they can be selected. [Using Method] [Menu] Î [2:Phone Diary] Î [1:Alarm] Î [1:Alarm] Î [2:Time setting] Î [3:Bell setting] 4.1.2.2 Calculator AVP-2000B provides function of calculator for user’s convenience. [Using Method] [Menu] Î [2:Phone Diary] Î [2:Calculator] The using method is that first of all, after input of initial figure by using direction key, do select calculation symbol corresponding to the direction indicated in LCD window and then select the calculation method required. After selection of calculation symbol, do input second figure by using figure key and press button [OK], and then the calculation results are indicated in below line of LCD window. At this state, if direction key button [ ] is pressed, previous calculation results are moved to figure window to calculate first and are waiting for selection input of next calculation symbol. The next methods are just like the description mentioned above. 4.1.3 User Setup This user setup menu provides setup made by user of AVP-2000B. 4.1.3.1 Standby Display Mode AVP-2000B, at standby state, provides dual ways to indicate LCD window. There is mode showing your telephone number and present time with date. And also there is other mode showing logo of Acrowave Systems with phone number time and date. Basic mode of AVP-2000B is to show logo of Acrowave Systems. By using direction key or figure key [ ][ ], they can be selected. [Using Method] [Menu] Î [3:User Setup ] Î [1:Standgby Display Mode] 14 WiFi VoIP Phone 4.1.3.2 LCD Contrast This menu is adjusting contrast of LCD window. There are total 11 steps for adjusting contrast. After selecting menu, by using direction key ], contrast can be adjusted. [Using Method] [Menu] Î [3:User Setup] Î [2:LCD Contrast] 4.1.3.3 LCD Backlight In case that key button of AVP-2000B is pressed or when phone is called, this menu is adjusting time to light up. There are total 4 steps to be selected. By using direction key or figure key [ Always not lighting, ], they can be selected. 10 seconds lighting, 20 seconds lighting, always lighting. [Using Method] [Menu] Î [3:User Setup] Î [3:LCD Backlight] Î [2:10 seconds lighting] 4.1.3.4 Auto Answering This menu is for user to answer the phone automatically without pressing button [ ] with setting conditions when AVP-2000B is called. There is mode for user to answer the phone by using button [ ] when phone is called and also there is other mode for user to answer the phone automatically after bell rings once or three times. - 1. No Use 2. Bell Once 3. Bell three times By using direction key or figure key [ ] , they can be selected. [Using Method] [Menu] Î [3:User Setup] Î [4:Auto Answering] Î [3:Bell three times] 4.1.3.5 Localization This menu is setup using language, standard time server, time zone and sunlight saving time when AVP-2000B is used. For getting standard time with Internet, standard time server must be designated. IP address of basic server is 203.254.163.74. - 1 : using language 2 : time server setup By using direction key or figure key [ 3 : time zone setup 4: sunlight saving setup ] , they can be selected. 15 WiFi VoIP Phone [Using Method] [Menu] Î [3:User Setup] Î [5:Localization] Î [1:Using Language] Î [2:Korean] 4.1.3.6 Call Prefix AVP-2000B can be used through PSTN network using connection equipment (example: AVG-5400G) with PSTN network in Wireless Lan circumstances. In this case, for using PSTN network , it is needed to press country line selected number in advance to differentiate from VolP phone generally. This menu provides automatic function for those procedures. By using this menu, if PSTN country line selection number is input in advance, user can call by pressing phone number regardless of VoIP telephone number or PSTN telephone number. AVP-2000B provides country line selection number with one digit. If this menu is not needed, press button [CONFIRM] without inputting any figures after selecting this menu and then this function is removed. [Using Method] [Menu] Î [3:User Setup] Î [6:Call Prefix] Î [Country Line Selected number input] 4.1.3.7 Call Forward AVP-2000B have function for Call Forward when phone is called. This menu is setup for “Call Forward” function. [Using Method] [Menu] Î [3:User Setup] Î [7:Call Forward] Î [2:Call Forward] Î [Call Forward Phone number input] 4.1.3.8 Call Waiting AVP-2000B have function for Call Waiting when phone is called. This menu is setting for “Call Waiting” function. [Using Method] [Menu] Î [3:User Setup] Î [8:Call Waiting] Î [2:Call Waiting] 16 WiFi VoIP Phone 4.1.3.9 Password Change AVP-2000B is using password to remove phone lock function for phone setup change. At this time, user can change password to use. Initial password of AVP-2000B is “0000”. [Using Method] [Menu] Î [3:User Setup] Î [9:Password Change] Î[New Password] Î [Password Confirmation] 4.1.3.10 RingBack Tone Mode When you are phoning with AVP-2000B, you can select sending sound to people answering the phone. [Using Method] [Menu] Î [3:User Setup] Î [10:RingBack Tong Change] Î[1.RingBack Tone On] Î [Yes] 4.1.3.11 DTMF Mode While phoning with AVP-2000B, you can transmit DTMF. This mode is menu for DTMF transmitting methods. AVP-2000B supports following 3 modes. 1. SIP INFO (RFC2976) 2. RFC2833 OOB 3. Inband Mode Basic mode is setup for SIP INFO to be supported. [Using Method] [Menu] Î [3:User Setup] Î [0:Call DTMF] Î[1.SIP INFO] Î [Example] 4.1.4 Administrator Setup This menu provides setup for registration of AVP-2000B phone. This menu can be used after user does input password decided in advance. 4.1.4.1 Network Setup This menu can do setup and change of AVP-2000B network environment. - 1:DHCP 2:Fix IP By direction key or figure key [ [ ], they can be selected. 17 WiFi VoIP Phone 1) DHCP This menu is to be used with IP allotted automatically. [Using Method] [Menu] Î [4:Administrator Setup] Î [Password input] Î [1:Network Setup] Î [1:DHCP] Selection 2) Fix IP This menu is for Fix IP. [Using Method] [Menu] Î [4:Administrator Setup] Î [Password input] Î [1:Network setup] Î [1:Fix IP] selectionÎ [Phone IP address] Î [Net Mask Figures] Î [Gateway Address] Input 4.1.4.2 SIP Setup This menu is for setup and change of AVP-2000B registration. [Using Method] [Menu] Î [4:Administrator Setup] Î [Password input] Î [1:SIP Setup] selection Î [SIP Phone number] Î [SIP Server Address] Î [Domain Name] Î [SIP License Name] Î [SIP License Password ] Input 4.1.4.3 Wireless Lan AVP-2000B is phone used with connection of network by WiFi Wireless Land, IEEE802.11b. This menu is for setup and change relevant to IEEE802.11b Wireless Lan. 1:SSID setup, 2:passwordization setup, 4:Roaming setup, 3:802.1X License, 5:contact mode setup By direction key of figure key [ [ ], they can be selected. 1) SSID Setup This menu is for selection of AP to be contacted or to change AP already contacted with AVP-2000B. - 1:AP Scan, 2:direct Input [Using Method] [Menu] Î [4:Administrator Setup] Î [4:Wireless Lan Setup] Î [1:SSID Change] Î [1:AP Scan] or [2:Direct Input] selection 18 WiFi VoIP Phone 3) Passwordization Setup This is setup menu relevant to safety to be setup with use of wireless lan. Fixed Web key, supplied from IEEE802.11b standard, and be used by this menu. Fixed Web key, provided by AVP-2000B, supports 64 beat, 128 beat, ASKI Word mode and 16 digit mode. [Using Method] [Menu] Î [4:Administrator Setup] Î [4:Wireless Lan Setup] Î [2:Passwordization Setup] Î [2:Setup] Î [1:64 beat mode] Î [1:Character line Mode] Î [Fix Web key] Î [WEP key Number ] Input 4) 802.1X License This menu is relevant to license required by Wireless Lan Internet operators for use of wireless lan. This menu makes it possible to input user’s ID and password provided by the relevant operator when applied wireless Lan. For use of 802.1X license with AVP-2000B, first with this menu, do input user’s ID and password provided by the operator and then make contact with Wireless Lan AP so that it can be used by Wireless Lan License. Basic setup of AVP-2000B is mode not using 802.1X license function. [Using Method] [Menu] Î [4:Administrator Setup] Î [4:Wireless Lan Setup] Î [3:802.1X License] Î [1:Mode Setup] Î [User ID input] Î [User password input] 4) Roaming Setup This menu provides AVP-2000B with roaming or hand-over function under the circumstances of lots of AP setup. Basic setup of AVP-2000B is made to permit roaming movement. [Using Method] [Menu] Î [4:Administrator Setup] Î [4:Wireles Lan Setup] Î [4:Roaming Setup] Î [1:Roaming Setup] 5) Contact Mode This menu is to setup contact mode of wireless lan mode. This menu can do setup following 2 modes. *Infra-Structure mode, that is general AP mode stipulated in IEEE802.11b standard. *AdHoc mode that is only card contact mode without AP. 19 WiFi VoIP Phone With use of this menu, after selecting Wireless Lan Contact mode, AP connection have to be tried . For registration of phone, first check state of wireless lan to contact and select contact mode and complete phone registration procedures so that the relevant contact mode works. After contact completed, with the use of function <1.SSID change>, contact the relevant AP or card. [Using Method] [Menu] Î [4:Administrator setup] Î [4:Wireless Land setup] Î [5:contact mode] Î [1:general mode] 4.1.4.4 NAT This menu is for using to do setup or change the relevant circumstances to NAT with AVP-2000B. AVP-2000B provides functions passing NAT by two ways. One way is using STUN server for private network use. The other is to do port forwarding function in NAT server. - 1:NAT removal, 2:NAT setup 1) NAT removal This menu is to remove STUN and NAT port forwarding functions in AVP-2000B. [Using Method] [Menu] Î [4:Administrator setup] Î [3:NAT setup] Î [1:NAT Removal] selection 1) NAT setup This menu is to do setup STUN server and NAT port forwarding functions for private network use. Following are for NAT setup. - 1:STUN setup, 2:Fix NAT setup [Using Method] [Menu] Î [4:Administrator setup] Î [3:NAT setup] Î [1:NAT setup] selection 1. STUN setup This menu is for setup of STUN server and STUN port. [Using Method] [Menu] Î [4:Administrator setup] Î [3:NAT setup] Î [1:NAT setup] Î [1:STUN setup]Î [STUN server address] Î [STUN port] Input 20 WiFi VoIP Phone 2. Fix NAT setup This is menu for setup of NAT Port Forwarding Function. NAT server address, NAT SIP Port, and NAT RTP Port can be setup. [Using Method] [Menu] Î [4:Administrator setup] Î [3:NAT setup] Î [1:NAT setup Î [1:Fix NAT setup]Î [NAT server address] Î [NAT SIP Port] Î [NAT RTP Port] Input 4.1.4.5 CODEC Following are voice CODEC which can be used with AVP-2000B. - G.711 a/u law, G.723.1, G.726, G.729a Among the above, AVP-2000B can support another CODEC except G.711 a/u law. At the same time, two kinds of CODEC can be supported. So, user can do setup the kinds of CODEC to use. This menu has following selections. - G.711 a/u law - G.711 a/u law + G.723.1 - G.711 a/u law + G.729 - G.711 a/u law + G.726 [Using Method] [Menu] Î [4:Administrator setup] Î [2:CODEC setup] Î [3:G.711 + G.729] 4.1.4.6 Initialization This menu is to initialize the variables which are setup in AVP-2000B or to remove the registration of SIP registration server normally. 1) Rebooting This menu is enabling user to start AVP-2000B again. [Using Method] [Menu] Î [4:Administrator setup] Î [6:Initialization setup] Î [1:Rebooting] 2) Variables Initialization This menu is enabling user to change all setup figures in AVP-2000B to initial setup figures. If initialization is carried out by this menu, all figures, such as bell sound, contrast, backlight setup, password and etc, which were setup in AVP-2000B, are initialized. 21 WiFi VoIP Phone [Using Method] [Menu] Î [4:Administrator setup] Î [6:Initialization setup] Î [2:Variables Initialization] Î [1:Yes] 3) Factory Initialization This menu is to return all of AVP-2000B phone state to initial factory setup. [Using Method] [Menu] Î [4:Administrator setup] Î [6:Initialization setup] Î [3:Factory Initialization] Î [Yes] 4.1.3.7 Ping Test This menu is to carry out Ping Test to confirm simply network state and etc. with AVP-2000B. [Using Method] [Menu] Î [4:Administrator setup] Î [7:Test Mode]Î[1.Ping Test] Î [Address input]Î[Test rounds input] 22 WiFi VoIP Phone 4.2 Input Characters In case of transmitting short text message or making phonebook, AVP-2000B phone is converted to Input Characters Mode and waiting for characters input. Input characters methods are as follows: If AVP-2000B is converted to characters input mode, pictogram, showing characters input mode, is indicated at upper right side of LCD window. At this state, the wanted characters can be input by figure key and “*” “#”key of AVP-2000B. On input of characters, stipulated characters are supposed to show the corresponding characters to characters indicated on figure key. Input characters setup is as follows: Digit Button ㄱ ㄴ ㄷ ㅂ ㅅ ㅈ Input character Korean Alphabet @_+-= ㅋ ㄲ ABC ㄹ DEF ㅌ ㄸ GHI ㅍ ㅃ JKL ㅎ ㅆ MNO ㅊ ㅉ Digit Button Input charecter Korean Alphabet PQRS ㅁ TUV XYZ ㅇ . (vowel) Space ^ ! ~ % l (vowel) .*$&? ㅡ (vowel) # < > ( ) The kinds of indicating characters input are Korean, alphabet, capital/small character and digit. The pictogram at upper right side of LCD window shows pictures corresponding to each character input mode. That is, pictures show like [가] in korean [A] in English capital, [a] in English small character and [1] in digit. If it is needed to change kind of character during character input, it can be made by using sound adjustment button [ ] in left side of AVP-2000B. If present character input mode of Korean is to be changed English capital, press once sound adjustment button [ ]. Pictogram at upper right side of LCD window changes [가] to [A]. After that, if characters are input by figure key, English capital is input in LCD window. Change of kinds of character is made according to following sequence. Korean Î English Capital Î English small character Î Digit Î Korean 23 WiFi VoIP Phone 4.3 Phone book AVP-2000B provides function of phone book so that user can easily control phone numbers. AVP-2000B can keep memory of 100 phone numbers in shortened numbers. If direction key button [ ] of AVP-2000B is pressed, it enters menu of phonebook. Phone book menu is consisted of following 4 items. 1: Recent sent number, 2:Recent received number, 3:Phone number scan , 4:Phone number registration 4.3.1 OUTBOUND CALL AVP-2000B can store up to 32 phone numbers sent. With stored phone numbers, user can make a call. In case that the sent number is registered in phone book, it is shown as registered name in phone book. Otherwise, it is shown as the number sent. After selection of the relevant number in recent sent number menu, if button [call] is pressed, User can make a call again with the selected number, After selection of the relevant number, if button [confirm] is pressed, details on sent time and etc. are indicated. At this time, if menu button is pressed, <1.store> <2.removal>menu is indicated. If <1.store> is selected, it is moved to screen for registration of phone book. If <2.removal> is selected, the relevant number is removed in recent sent number list. 4.3.2 INBOUND CALL AVP-2000B can store up to 32 phone numbers received and using stored numbers, it can make a call. In case that the received number is registered in phone book, it is shown as registered name in phone book. Otherwise, it is shown as the number received. If user presses button [call] after selecting the relevant number among recent received number, the user can make a call again with the selected number. After selecting the relevant number, if button [confirm] is pressed, details on received time and etc. are indicated. At this time, if button [menu] is pressed, <1.store> <2.removal>menu is indicated. If <1.store> is selected, it is moved to screen for registration of phone book. If <2.removal>is selected, the relevant number is removed in recent received number list. 24 WiFi VoIP Phone 4.3.3. SEARCH PHONEBOOK Using function of “phone number registration” of AVP-2000B, it shows all the stored phone numbers and the registered numbers can be found. If “Search phonebook” menu is selected, LCD window shows 3 phone numbers registered in one screen. At this time, user can make it move to next screen for finding required phone numbers by direction key [ ]. After having the cursor positioned to the required phone list, press button [menu]. Then, it shows menu <1.compilation> <2.removal>for the relevant phone number. If menu <1.compilation>is selected by number key, it is converted to the screen to revise information of the relevant phone number. If menu <2.removal>is selected, the relevant phone number is removed in phone book. 4.3.4 ADD NEW ENTRY For user’s convenience, AVP-2000B can register up to 100 phone numbers that user wants. In order to register new phone number, first select phone number new registration menu. If it is selected, LCD window is waiting for name input to be given to new phone number. If user presses direction key [ ] after name input, input cursor moves to window for phone number input. After registration of phone number, press button [confirm]. Then, you can make a call by the shortened number indicated on right side of phone number input window. Phone book 4:Phone number 4.3. registration Name 홍길동 가 가 PhoneNumber Phone [01] Number [01] 홍길동 가 1234567 Store proceeding … [01] 25 Store Completion WiFi VoIP Phone 4.4 MESSAGE (SIP Instance Message) AVP-2000B provides short text message transmitting and receiving function between equipments using SIP protocol. This message transmitting technique is subject to IEEE RFC-3428 standard. This function of AVP-2000B can be worked by using direction key [ ]. This function provides<1:Text Confirm> and <2:Text letter Writing>. Details are as follows: 4.4.1 Received Message This is menu for confirming text message transmitted between AVP-2000B phone or through equipments using SIP protocol. If AVP-2000B receives text message in standby state, it shows “new message arrived” in LCD window and message icon is lighted up. At this state, if you press direction key [ ] and select [1:message receiving], some of front parts of the arrived text message are showing. In case that there are lots of message arrived, by using direction key [ ] or [ ], you have to have cursor positioned at the message you want to confirm and then if you press button [confirm], its arrival time and contents are showing. Text message Textmsg Confirm [05/02 02:57pm] 1:TextmsgConfirm 01:Test MSG Tel : 1234 2:Textmsgsending 02:Questions This is test text MSG.. Mail Test AVP-2000B can store up to 32 text messages arrived. 4.4.2 SEND MESSAGE This is menu for transmitting text message with terminal observing IEEE-RFC3284 standard byAVP-2000B phone or between equipments using SIP protocol. AVP-2000B can transmit up to 80 text message to the required terminal. 26 WiFi VoIP Phone 4.4.2.1 New Message transmitting This is menu for transmitting newly made message. Text Message Text MSG Sending Contents Writing 1:TxtMSG Confirm 1:Contentswriting This 2:TxtMSG Sending 2:Transmitted Txt message. is test MSG Contents Writing Message store The other party’ s 1:Yes phone number 2:No : 1234_ AVP-2000B is able to store up to 32 transmitted message. 4.4.2.2 Send Stored Message This is menu for transmitting again the stored message sent before. Text Message Text MSG Sending Text MSG Sending 1:TxtMSG Confirm 1:ContentsWriting 1:Test mail 2:TxtMSG sending 2:Transmitted Txt 2:Short MSG trans 3:How are you. Message [Confirm ] Text MSG Sending This is test mail. [Menu] Text MSG Sending This is test mail. 1. Revision 2. Sending <2.Send> Contents Writing Message Store The other party’ s 1:Yes phone number 2:No : 1234_ 27 WiFi VoIP Phone 4.5 Soft Menus For user’s convenience, AVP-2000B provides following functions at call state. 1.Phone Book, 2:Call Mute, 3:Call Transfer, 4:Call Hold At call state, if you press button [Menu], LCD screen appears to be transferred. At this state, if you press button [cancel], it returns to call state. 4.5.1 Phonebook Please refer to <4.3 phonebook>. 4.5.2 Call Mute At call state in AVP-2000B, call mute function is to prevent user’s own voice from being transmitted to the other party’s phone. If this function is setup by using button [Menu], any sound does not be transmitted to the other party’s phone. “>>Call mute<<” Message blinks in LCD window of user’s AVP-2000B phone. [Using Method] [Call] Î [Menu] Î [2:Call mute] At call mute state, if you want to remove this function, press button [menu] again and select <2:Call sound connection>, or you can press volume adjusting button [ ] or button [ ] for automatic call sound connection. [Using Method] [Call] Î [Menu] Î [2:Call sound connection] 4.5.3 Blind Call Transfer At call state, AVP-2000B provides function transferring to other phone number you want. If you do input the number you want to transfer, your present call is connected with the newly inputted number and your present call stops. [Using Method] [Call] Î [Menu] Î [3:Blind Call Transfer] Î [Phone number input] Î [Confirm] 28 WiFi VoIP Phone 4.5.4 Call Hold At call state, AVP-2000B provides function for temporary call hold. [Using Method] [Call] Î [Menu] Î [4:Call Hold] Î [Phone Number input] Î [Confirm] If call hold function is worked, message “>>call hold<<” blinks at down part of LCD window. In order to remove call hold state of AVP-2000B, do the call hold procedures described above again. Then, call hold is removed and phone is connected again. 4.5.5 Call Waiting At call state, if other phone is called, AVP-2000B provides information of such phone number during call. AVP-2000B informs it by short warning sound. Warning sound rings once every 3 seconds. With warning sound, message “>>call standby<<” blinks. At this state, if you want to transfer to the phone arrived later, do press button [call]. Then, you are connected with that phone. And your present call changes to call hold state and vice versa. It can be confirmed by the number connected in LCD window. At state connected with phone called later, when you finish call, you are connected again with previous phone. 29 -Acrowave Systems –CradleAP RF Exposure Statement The device should be used beyond 20cm from the body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 31 Page Mode : UseNone XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:6e76f963-7a84-48ad-82de-a67a81c34f6a Producer : Acrobat Distiller 5.0 (Windows) Create Date : 2005:12:27 15:05:04+09:00 Modify Date : 2006:02:08 10:58:30-06:00 Metadata Date : 2006:02:08 10:58:30-06:00 Creator Tool : Word용 Acrobat PDFMaker 5.0 Document ID : uuid:8221b40c-3090-4c83-875d-f6b54353b1e9 Format : application/pdf Creator : ohsehun Title : 자 사 규 격 서 Tagged PDF : No Author : ohsehunEXIF Metadata provided by EXIF.tools