Acrox Technologies MU37 Wireless Mouse User Manual PT PNM6506 BK C 15 0678 QSG V1 EN ai

Acrox Technologies Co., Ltd. Wireless Mouse PT PNM6506 BK C 15 0678 QSG V1 EN ai

Manual

PT-PNM6506-BK-CWIRELESS LASER MOUSEQUICK SETUP GUIDEBefore using your new product, please read these instructions to prevent any damage.PACKAGE CONTENTS• Wireless laser mouse • AA batteries (2)• Nano receiver • Quick Setup GuideSYSTEM REQUIREMENTS• Windows® 10, Windows® 8.1, Windows® 8, Windows® 7, Windows Vista®, or Mac OS 10.X or higher• One available USB portFEATURES • Track-on-Glass Laser Sensor for enhanced trackingDPI SWITCHThe Power/DPI LED indicator behind the tilt wheel lights up when you plug the mouse into the USB port. The brightness of the LED indicates the DPI setting in use. There are three dierent settings:• Bright: 2400 DPI • Dim: 1600 DPI • No light: 800 DPIThe default setting is 800 DPI. You can switch between DPI settings by pressing the swtich and cycling through the DPI settings. In order to save power, the LED only stays on for 10 seconds.Forward • Press this button to view the next page in your Internet browser.Backward • Press this button to view the previous page in your Internet browser.Zoom Key (Zoom in /out)• Press the Zoom key and turn the scroll wheel at the same time to zoom in and out.Win Key• Press this button to access the Start screen.Final flat size: 371.48 × 148.08 mm Final fold size: 123.82 × 148.08 mmNano receiverConnect buttonON/OFF switchBattery coverLeft buttonRight buttonScroll wheelDPI switch key DPI LEDBattery status LED indicatorBackwardForwardZoom keyStart menuSETTING UP YOUR MOUSE1 Remove the battery cover.2 Replace the battery cover.3 Remove the nano receiver.4 Insert two AA batteries (included) into the battery compartment. Make sure that the + and – signs match the symbols in the compartment.5 Turn on the power switch.DPI switch key DPI LEDForward Zoom keyBackwardPull upAA batteriesPT-PNM6506-BK-C_15-0678_QSG_V1_EN.ai 1 8/14/2015 6:55:13 PMPT-PNM6506-BK-C_15-0678_QSG_V1_EN.ai 1 8/14/2015 6:55:13 PMV1FINALFOR PRINT
6 Plug the nano receiver into the USB port on your computer.7 Test your mouse to make sure that it works with your computer. 8 If the mouse does not work, put it into pairing mode by unplugging and replugging the nano receiver into the USB port on your computer, then pressing the Connect button on the mouse.Warning: If you need to travel with your wireless mouse, make sure that you slide the power switch to o.LED INDICATORSDPI switch key DPI LEDV1 ENGLISH 15-0678FUNCTIONPower ONPairing Low batteryWhen DPI switchedDESCRIPTIONLED is on for 10 secondsLED blinks. (LED OFF when paired or failed after 10 seconds)LED blinks for 10 secondsDPI indicatedSTATUS3 LED 2 LED 1 LED DESCRIPTION (status will show for ve seconds at power on, or blink status for ve seconds after waking from sleep mode)80~100% of maximum battery50~70% of maximum battery20~40% of maximum batteryBattery status LED indicatorCLEANING YOUR MOUSE• Wipe the mouse with a damp, lint-free cloth.SPECIFICATIONSMouse:• Dimensions (L×W×H): 4.96 ×3.24 × 1.76 in. (12.59 × 8.23 × 4.48 cm)• Weight: 3.17 oz. (.09 kg)• Batteries: 2 AA alkaline batteries• Battery life: 12 months (based on average usage)• Radio frequency: 2.4 Ghz• Operating distance: 32.8 feet (10 meters)• Rating: 3V D.C. - 10 mAIMPORTANT SAFETY INFORMATION• This product has no serviceable parts. Use of controls or adjustments of procedures other than this guide may result in danger.• DO NOT direct the laser beam at anyone’s eye.CAUTION: To use this product properly, please read this guide before installing.DPI switch key DPI LEDBattery status LED indicatorTROUBLESHOOTINGMy mouse is not working.• Move your mouse and computer closer together.• Make sure that your computer meets the system requirements.• Only use the mouse on a clean, at, non-slippery surface to ensure smooth and accurate cursor action. Avoid using your mouse on reective, transparent, or metallic surfaces.• If your mouse stops working: • Make sure that your mouse and nano receiver are paired by pressing the connect button on the mouse. • Try connecting your nano receiver into a dierent USB port on your computer. • Replace the mouse batteries.LEGAL NOTICES• This product complies with IEC 60825-1, class 1 laser product.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Radiation Exposure Statement:The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.ONE-YEAR LIMITED WARRANTYCONTACT PLATINUMFor customer service, call 1-800-499-3964The Pt logo is a registered trademark of Best Buy.PLATINUM is a trademark of Best Buy and its aliated companies. Distributed by Best Buy Purchasing, LLC©2015 Best Buy. All rights reserved. Made in ChinaNano receiver:• Dimensions (L×W×H): .0.74 × 0.57 × 0.25 in. (18.9 × 14.5 × 6.25 cm)• Weight: 0.17 oz. (.005 kg)• Interface: USB 1.1, 2.0, 3.0PT-PNM6506-BK-C_15-0678_QSG_V1_EN.ai 2 8/14/2015 6:55:21 PMPT-PNM6506-BK-C_15-0678_QSG_V1_EN.ai 2 8/14/2015 6:55:21 PMThis device complies with Industry Canada license-exempt RSS standard(s).Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee auxdeux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillageradioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.

Navigation menu