Acrox Technologies RX06 Dongle User Manual DX WLC1401 12 1183 QSG V1 EN ai

Download:
Mirror Download [FCC.gov]
Document ID	1892760
Application ID	xqnlkQBWbJ3mKiwAJRFQ0g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	88.57kB (1107155 bits)
Date Submitted	2013-02-03 00:00:00
Date Available	2013-02-03 00:00:00
Creation Date	2013-01-09 17:46:18
Producing Software	Acrobat Distiller 10.1.4 (Windows)
Document Lastmod	2013-01-21 10:42:59
Document Title	DX-WLC1401_12-1183_QSG_V1_EN.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EUS110120

V1
FINAL
FOR PRINT
DX-WLC1401_12-1183_QSG_V1_EN.ai
1/9/2013
5:46:10 PM
Installing the mouse batteries and removing the
nano receiver
Package contents
• Wireless keyboard
• Wireless mouse and nano receiver
• Quick Setup Guide
Keyboard buttons
Media player hot keys
1 Take the battery cover off.
2 Remove the nano receiver.
System requirements
• Windows® 8, Windows® 7, Windows Vista®, or Windows® XP
• One available USB port
DX-WLC1401
Wireless Keyboard and Mouse Combo
Backspace
Num
Lock
Home
Shift
End
Alt
Ctrl
Alt
Home
Del
Shift
Shift
End
Ctrl
Alt
Alt
3 Insert the batteries as shown inside the battery compartment.
4 Replace the cover.
Caution: Insert the battery with the correct orientation, according to
the instruction label on the mouse.
Right
button
Enter
Caps
Lock
Enter
Pg Dn
Ctrl
Del
AAA battery × 2
Connect
button
Scroll
wheel
Enter
Pg Dn
Ctrl
Features
Pg Up
Pg Up
Enter
Caps
Lock
Shift
ON/OFF switch
Tab
Num
Lock
Backspace
Tab
Pull
LED
indicator
Function
Description
Play/Pause
Switch between playing and pausing media.
Stop (Media)
Stop playing the media in the media player.
Previous
Switch to the previous media track.
Next
Switch to the next media track.
Volume down (Voice-)
Decrease the computer’s sound volume.
Volume up (Voice+)
Increase the computer’s sound volume.
Mute
Mute (turns off) the computer’s sound.
Calculator
Start Microsoft calculator.
and
Left button
Nano receiver
Battery cover
AAA batteries
Before using your new product, please read these instructions to prevent any damage.
Icon
LED indicator
Low battery and pairing indicator.
10
Connect button
Press to initiate pairing with your computer.
11
Battery cover
Remove to install or replace the batteries.
QUICK SETUP GUIDE
Installing the keyboard batteries
1 Take the battery cover off.
Mouse indicator
LED indicator
Troubleshooting
• Make sure that your computer meets the system requirements.
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment.
QUICK SETUP GUIDE
DX-WLC1401_12-1183_QSG_V1_EN.ai
1/9/2013
5:46:31 PM
Installing the keyboard batteries
Mouse indicator
1 Take the battery cover off.
2 Insert the batteries as shown inside the battery compartment.
3 Replace the cover.
Troubleshooting
LED indicator
Power ON
Red LED is on for
10 sec.
Low battery
warning
Red LED blinks for
10 sec.
Pairing
Red LED blinks.
When paired or
failed after 10 sec.
LED is off.
AAA battery × 2
Setting up the connection between the nano
receiver, mouse and keyboard
1 Plug the nano receiver into the USB port on your computer.
2 If the mouse or keyboard does not work, do the following:
Re-plug the nano receiver into the USB port on your computer, then
press the connect button on the mouse and keyboard. If the mouse or
keyboard does not work after 10 seconds, pair them again by pressing
the connect button on the mouse or keyboard. (The receiver has
auto-pairing function).
3 The LED indicator on the mouse and keyboard flashes steadily when it is
in pairing mode and stops blinking when it is successfully paired with
the receiver.
4 When the battery gets low, the battery indicator on the mouse or
keyboard will start to blink.
• Make sure that your computer meets the system requirements.
• Only use the mouse on a clean, flat, non-slippery surface to ensure
smooth and accurate cursor action.
• Avoid using your mouse on reflective, transparent, or metallic surfaces.
• If your mouse or keyboard stops working:
• Make sure your mouse or keyboard and nano receiver are paired
by pressing the connect button on the mouse or keyboard.
• Replace the mouse or keyboard batteries.
Legal notices
Keyboard indicator
LED indicator
Power ON
Red LED is on for
10 sec.
Low battery
warning
Red LED blinks for
10 sec.
Pairing
Red LED blinks.
When paired or
failed after 10 sec.
LED is off.
Cleaning your mouse and keyboard
• Wipe the mouse and keyboard with a damp, lint-free cloth.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IC Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
“Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne
doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.”
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment.
“Cet équipement est conforme à l’exposition aux rayonnements IC limites établies pour un
environnement non contrôlé.”
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies
pour un environnement non contrôlé.
One-year limited warranty
For complete warranty, visit www.dynexproducts.com.
Contact Dynex
For customer service call 1-800-305-2204
www.dynexproducts.com
DYNEX is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.
V1 ENGLISH 12-1183

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Author                          : EUS110120
Create Date                     : 2013:01:09 17:46:18-07:00
Modify Date                     : 2013:01:21 10:42:59+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : EUS110120
Title                           : DX-WLC1401_12-1183_QSG_V1_EN.ai
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:01:21 10:42:59+08:00
Producer                        : Acrobat Distiller 10.1.4 (Windows)
Document ID                     : uuid:8ed53563-edb2-465b-899c-833e085965da
Instance ID                     : uuid:e490b5bd-4d6c-43b1-950a-1b9c0871419d
Page Count                      : 2

EXIF Metadata provided by EXIF.tools