Acrox Technologies RX08 Dongle for Wireless Mouse User Manual NS WLM1451 SV 13 0855 QSG V1 EN ai

Download:
Mirror Download [FCC.gov]
Document ID	2102913
Application ID	VFNmgNoExGVVVYjJDw5rTw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	13.16kB (164465 bits)
Date Submitted	2013-10-27 00:00:00
Date Available	2013-10-28 00:00:00
Creation Date	2013-10-02 12:01:42
Producing Software	Acrobat Distiller 10.1.8 (Windows)
Document Lastmod	2013-10-02 13:15:06
Document Title	NS-WLM1451-SV_13-0855_QSG_V1_EN.ai
Document Creator	PScript5.dll Version 5.2.2
Document Author:	EUS110120

Quick Setup Guide
NS-WLM1451-SV | Five-Button Wireless Mouse
Congratulations on your purchase of a high-quality Insignia
product. Your NS-WLM1451-SV represents the state of the art in
wireless mouse design to ensure for reliable and trouble-free
performance.
Package contents
System requirements
Installing the batteries
• Windows® 8, Windows® 7, Windows Vista®, Windows® XP, or Mac OS
[REVIEWERS: What is the system requirement for Mac OS? (e.g. Mac OS 10.0 or higher)?]
• One available USB port
1 Take the battery cover off.
2 Insert the battery inside the battery compartment.
Features
3 Replace the cover.
Top
• Five-button wireless mouse
• Nano receiver
• Quick Setup Guide
Scroll wheel
Note: Insert the battery with the correct orientation, according to the instruction
label on the mouse.
LED indicator
and
Backward
Pull
Right
button
Before using your new product, please read these instructions to prevent any damage.
Forward
AA battery
Left button
ON/OFF switch
Connect
button
Bottom
v1
R3
Nano receiver
Battery cover
Removing the nano receiver
1 Remove the battery cover.
2 Pull the nano receiver out of its slot in the battery compartment.
3 Replace the cover.
Setting up the connection between the receiver and
the mouse
1 Plug the nano receiver into a USB port on your computer.
Mouse indicator
LED indicator
Note: The drivers automatically install onto your computer and you can start using
your mouse.
Power ON
LED is on for 3 sec.
Low battery warning
LED blinks for 10 sec.
Pairing
LED blinks 3 times.
When paired or
failed after 10 sec.
LED is off.
Specifications
Rating: 3V C.C. - 10mA
2 If the mouse does not work, put it into pairing mode by pressing the
connect button on the bottom of your mouse.
Note: If the mouse does not work after 10 seconds, unplug and re-plug the nano
receiver then press the connect button on the mouse again.
3 The LED indicator on the mouse flashes steadily when it is in pairing mode
and turns off when it is successfully paired with the nano receiver.
4 When the battery power gets low, the battery indicator on the mouse
starts to blink.
Removing the nano receiver from your computer
Windows:
1 To remove the nano receiver from your PC, right-click the USB device icon
in your system tray, located on the right side of your task bar.
2 Click Eject [device name]. A message appears that you are now “Safe to
Remove Hardware.”
3 Remove the receiver from your computer.
Mac OS:
1 Click the Finder icon on your dock. The Finder window opens.
2 In the left panel, select [device name] under the “DEVICES” heading, then
click
(eject). “[device name]” disappears and the USB device can be
safely removed from your computer.
[REVIEWERS: What will show up as the device name in the finder window or systems tray?]
Cleaning your mouse
• Wipe the mouse with a damp, lint-free cloth.
Troubleshooting
• Make sure that your computer meets the system requirements.
• Only use the mouse on a clean, flat, non-slippery surface to ensure
smooth and accurate cursor action.
• If your mouse stops working:
• Make sure that your mouse and nano receiver are paired by pressing
the connect button on the mouse.
• Replace the mouse battery.
• Avoid using your mouse on reflective, transparent, or metallic surfaces.
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
RSS-Gen and RSS-210 statement
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne
doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
RSS-102 statement
This equipment complies with Industry Canada radiation exposure limits set forth for an
uncontrolled environment.
Cet équipement est conforme à l'exposition aux rayonnements Industry Canada limites établies
pour un environnement non contrôlé.
One-year limited warranty
For complete warranty, visit www.insigniaproducts.com.
Contact Insignia
For customer service, call 1-877-467-4289 (U.S. and Canada)
or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
INSIGNIA is a registered trademark of BBY Solutions, Inc. Registered in some countries.
Distributed by Best Buy Purchasing, LLC, 7601 Penn Ave South, Richfield, MN 55423 U.S.A.
©2013 BBY Solutions, Inc. All Rights Reserved.
V1 ENGLISH 13-0855

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Author                          : EUS110120
Create Date                     : 2013:10:02 12:01:42-06:00
Modify Date                     : 2013:10:02 13:15:06-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Title                           : NS-WLM1451-SV_13-0855_QSG_V1_EN.ai
Creator                         : EUS110120
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:10:02 13:15:06-05:00
Producer                        : Acrobat Distiller 10.1.8 (Windows)
Document ID                     : uuid:0579bb70-b744-4314-8e0e-b3f38766f918
Instance ID                     : uuid:dd5da60d-9c60-49f5-9e4e-58cfd204c90b
Page Count                      : 2

EXIF Metadata provided by EXIF.tools