Actiontec Electronics AU802C 802.11g Access Point User Manual AU802C

Download:
Mirror Download [FCC.gov]
Document ID	331449
Application ID	O1DnvtOayyHWW70ZEJ2lZA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.53kB (94064 bits)
Date Submitted	2003-06-10 00:00:00
Date Available	2003-06-09 00:00:00
Creation Date	2003-06-03 13:25:46
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-06-03 13:25:46
Document Title	Microsoft Word - AU802C User manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	agnesf

AU802C User’s Manual
1. Installation: Connect AP to PC with Cross Over Ethernet cable. Connect 5V 1.6A
power adapter to the AP. You can see all LEDs are turn on.
2. Configuration: Setting Ethernet card IP address with 192.168.1.X, subnet mask with
255.255.255.0, restart machine if asked to do so.
3. AP setting: Open a internet explore, such as Netscape or Internet explore, enter URL
http://192.168.1.240 ,Then you can see a pop up window with user name and
password. Enter nothing and click OK to continue. Then you enter into setting web
page. Here you can set AP’s parameter, go to wireless icon, set SSID and wireless
channel. For 802.11g AP, channel should be 2.4G channel 1 to channel 14.
4. Connect with a Client: In order to be associated with the AP, one client should have
same SSID, and select Access Point as communication mode. Also Set client IP
Address and subnet mask as 192.168.1.X, subnet mask with 255.255.255.0. Client
can automatically search for a near by AP to get connected.
Regulatory Compliance Notices Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this
device that are not expressly approved by Actiontec Electronics, Inc may void the user’s
authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo – United States only
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry of
Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
"IMPORTANT NOTE: To comply with FCC RF exposure compliance
requirements the antenna used for this transmitter must be
installed to provide a separation distance of at least 20
cm from all persons and must not be co-located or operating
in conjunction with any other antenna or transmitter."
For questions regarding your product, or the FCC declaration, contact:
Actiontec Electronics, Inc
760 North Mary Ave,
Sunnyvale, CA 94086
United States

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:06:03 13:25:46-07:00
Modify Date                     : 2003:06:03 13:25:46-07:00
Page Count                      : 2
Creation Date                   : 2003:06:03 20:25:46Z
Mod Date                        : 2003:06:03 20:25:46Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : agnesf
Metadata Date                   : 2003:06:03 20:25:46Z
Creator                         : agnesf
Title                           : Microsoft Word - AU802C User manual.doc

EXIF Metadata provided by EXIF.tools