Actiontec Electronics SBRT8812AU ScreenBeam 802.11 a/b/g/n/ac WiFi Module User Manual Manual
Actiontec Electronics Inc ScreenBeam 802.11 a/b/g/n/ac WiFi Module Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2597647 |
| Application ID | tk7ruivmA1VZXa7NbJgk9A== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 30.22kB (377758 bits) |
| Date Submitted | 2015-04-27 00:00:00 |
| Date Available | 2015-04-28 00:00:00 |
| Creation Date | 2015-04-24 17:12:21 |
| Producing Software | Acrobat Distiller 7.0 (Windows) |
| Document Lastmod | 2015-04-24 17:12:21 |
| Document Title | Microsoft Word - EUT Photos and Test Setup Photos(FCC).doc |
| Document Creator | PScript5.dll Version 5.2 |
| Document Author: | Administrator |
PRODUCT SPECIFICATION ScreenBeam 802.11 a/b/g/n/ac WiFi Module Model Number: SBRT8812AU 2.4G channel：1-11 5G channel：36-48 ;149-165 Custom Approval Section Custom Name Department Approval DESIGN Date： CHECK APPROVAL Actiontec Electronics, Inc. 760 North Mary Ave., Sunnyvale, California 94086 United States Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU Document revision history Revision Date Approved by Remarks Version 1.0 2015-02-27 Draft Version 1.1 2015-04-17 Adding statement PAGE 2 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 1. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4~2.5GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g,11Mbps for IEEE 802.11b and 150Mbps for IEEE 802.11n and 433.3Mbps for IEEE 802.11ac to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.11 a/b/g/n/ac USB Module offers absolute interoperability with different vendors 802.11a/b/g/n/ac.Access Points through the wireless LAN. 2. Features Compatible with IEEE 802.11b standard to provide wireless 11Mbps date rate. Compatible with IEEE 802.11g standard to provide wireless 54Mbps date rate. Compatible with IEEE 802.11n standard to provide wireless 150Mbps date rate. Compatible with IEEE 802.11ac standard to provide wireless 433.3Mbps date rate. Operation at 2.4~2.5GHz and 5.15~5.825GHz frequency band to meet worldwide regulations Provides simple legacy and 20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility. Supports infrastructure networks via Access Point and ad-hoc network via peer-to-peer communication Supports IEEE 802.11i(WPA and WPA2),WAPI,. enhanced security Friendly user configuration and diagnostic utilities Drivers support Windows XP,Vista.Win7 High speed USB 2.0 interface ROHS compliant PAGE 3 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 IEEE 802.11b Section Feature 3.2.1.1 3.2.1.2 3.2.1.3 Standard Radio and Modulation Schemes Operating Frequency 3.2.1.4 Channel Numbers 3.2.1.5 Data Rate Media Access Protocol 3.2.1.6 3.2.1.7 3.2.1.8 Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector Detailed Description ● IEEE 802.11b ● DQPSK , DBPSK , DSSS , and CCK ● 2412 ～ 2472MHz ISM band ● ● ● ● 11 channels for United States 13 channels for Europe Countries 14 channels for Japan 11,5.5,2,and 1Mbps ● CSMA/CA with ACK ● Typical RF Output Power at each RF chain,Data Rate and at room Temp. 25℃ 17dBm(±2dB) at 1,2,5.5,11Mbps Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% -76 dBm at 2Mbps -76 dBm for 11Mbps ● ● ● ● PAGE 4 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.2 IEEE 802.11g Section Feature Detailed Description 3.2.2.1 3.2.2.2 3.2.2.3 Standard Radio and Modulation Type Operating Frequency 3.2.2.4 Channel Numbers 3.2.2.5 Data Rate Media Access Protocol 3.2.2.6 ● IEEE 802.11g ● QPSK , BPSK , 16QAM ,64QAM with OFDM ● 2412 ～ 2472MHz ISM band ● ● ● ● 11 channels for United States 13 channels for Europe Countries 13 channels for Japan 6,9,12,18,24,36,48,54Mbps ● CSMA/CA with ACK ● 3.2.2.7 Transmitter Output Power at Antenna Connector Receiver Sensitivity at Antenna Connector 3.2.2.8 ● ● ● ● ● ● ● ● ● ● ● ● ● Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ +17 dBm at 6,9Mbps +16 dBm at 12,18Mbps +15 dBm at 24,36Mbps +14 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ -82 dBm at 6Mbps -81 dBm at 9Mbps -79 dBm at 12Mbps -77 dBm at 18Mbps -74 dBm at 24Mbps -70 dBm at 36Mbps -66 dBm at 48Mbps -65 dBm at 54Mbps PAGE 5 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.3 IEEE 802.11a Section 3.2.3.1 3.2.3.2 3.2.3.3 Feature Standard Radio and Modulation Type Operating Frequency 3.2.3.4 Channel Numbers 3.2.3.5 Data Rate Media Access Protocol 3.2.3.6 Detailed Description ● IEEE 802.11a ● QPSK , BPSK , 16QAM ,64QAM with OFDM ● ● ● ● ● ● ● ● ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada ● CSMA/CA with ACK ● 3.2.3.7 Transmitter Output Power at Antenna Connector ● ● ● ● ● ● 3.2.3.8 Receiver Sensitivity at Antenna Connector ● ● ● ● ● ● ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for Japan 5.18 ~ 5.24GHZ, 5.745~5.825GHz Hz for Europe 5.18 ~ 5.24GHZ, 5.745~5.825GHz for China 12 non-overlapping channels for US and Canada 8 non-overlapping channels for Japan 19 non-overlapping channels for Europe 4 non-overlapping channels for China 6,9,12,18,24,36,48,54Mbps Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ +14 dBm at 6,9Mbps +13 dBm at 12,18Mbps +12 dBm at 24,36Mbps +11 dBm at 48,54Mbps Typical Sensitivity at each RF chain. Frame(1000-byte PDUs)Error Rate<10% at room Temp 25℃ -82 dBm at 6Mbps -81 dBm at 9Mbps -79 dBm at 12Mbps -77 dBm at 18Mbps -74 dBm at 24Mbps -70 dBm at 36Mbps -66 dBm at 48Mbps -65 dBm at 54Mbps PAGE 6 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.4 IEEE 802.11n Section 3.2.4.1 3.2.4.2 3.2.4.3 Feature Detailed Description Standard ● IEEE 802.11n ● BPSK , QPSK , 16QAM ,64QAM with OFDM Radio and Modulation Type Operating ● Frequency ● 2.4GHz band:2412 ~ 2472MHz 2412 ~ 2462MHz (for FCC) 5GHz and:5.18 ~ 5.24GHZ, 5.745~5.825GHz MCS GI=800ns 20MHz GI=400ns 40MH 40MHz 20MHz 3.2.4.4 3.2.4.5 Data Rate Media Access Protocol Transmitter Output 3.2.4.6 Power at Antenna Connector 6.5 13.5 7.2 15 13 27 14.4 30 19.5 40.5 21.7 45 26 54 28.9 60 39 81 43.3 90 52 108 57.8 120 58.5 121.5 65.0 135 65 135 72.2 150 ● CSMA/CA with ACK ● Typical RF Output Power(tolerance±2dB) at each RF chain,Data Rate and at roomTemp. 25℃ ● 2.4GHz Band/HT20 ● +14dBm at MCS0~7 ● 2.4GHz Band/HT40 +14dBm at MCS0~7 5GHz Band/HT20 ● +11dBm at MCS0~7 5GHz Band/HT40 +11dBm at MCS0~7 Typical Sensitivity at each RF chain at Which Frame(1000-byte PDUs)Error Rate=10% and at room Temp. 25℃ 3.2.4.7 Receiver Sensitivity at Antenna Connector 2.4GHz Band/HT20 2.4GHz Band/HT40 ● -82dBm at MCS0 ● -79dBm at MCS0 ● -79dBm at MCS1 ● -76dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS2 ● -74dBm at MCS3 ● -71dBm at MCS3 ● -70dBm at MCS4 ● -67dBm at MCS4 ● -66dBm at MCS5 ● -63dBm at MCS5 ● -65dBm at MCS6 ● -62dBm at MCS6 ● -64dBm at MCS7 ● -61dBm at MCS7 5GHz Band/HT20 5GHz Band/HT40 ● -82dBm at MCS0 ● -79dBm at MCS0 ● -79dBm at MCS1 ● -76dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS2 ● -74dBm at MCS3 ● -71dBm at MCS3 ● -70dBm at MCS4 ● -67dBm at MCS4 ● -66dBm at MCS5 ● -63dBm at MCS5 ● -65dBm at MCS6 ● -62dBm at MCS6 ● -64dBm at MCS7 ● -61dBm at MCS7 PAGE 7 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 3.2.5 IEEE 802.11ac Section 3.2.5.1 3.2.5.2 Feature Standard Radio and Modulation Type 3.2.5.3 Operating Frequency 3.2.5.4 Channel Numbers 3.2.5.5 Data Rate Media Access Protocol Transmitter Output Power at Antenna Connector 3.2.5.6 3.2.5.7 Detailed Description ● IEEE 802.11ac ● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM ● ● ● ● ● ● ● ● ● 5.18 ~ 5.24GHZ, 5.745~5.825GHz for US and Canada 5.15~5.35GHz and 5.47~5.725GHz for Japan 5.15~5.35GHz and 5.47~5.725GHz for Europe 5.725~5.825GHz for China 12 non-overlapping channels for US and Canada 8 non-overlapping channels for Japan 19 non-overlapping channels for Europe 4 non-overlapping channels for China at most 433.3 Mbps ● CSMA/CA with ACK ● ● ● 3.2.5.8 Receiver Sensitivity at Antenna Connector Typical RF Output Power(tolerance±2dB) at each RF chain, Data Rate and at roomTemp. 25℃ +11 dBm at HT20 / HT40 Typical Sensitivity at each RF chain. PDUs)Error Rate<10% at room Temp 25℃ Frame(1000-byte 5GHz Band / HT20 5GHz Band / HT40 ● -82dBm at MCS0 ● -79dBm at MCS0 ● -79dBm at MCS1 ● -76dBm at MCS1 ● -77dBm at MCS2 ● -74dBm at MCS2 ● -74dBm at MCS3 ● -71dBm at MCS3 ● -70dBm at MCS4 ● -67dBm at MCS4 ● -66dBm at MCS5 ● -63dBm at MCS5 ● -65dBm at MCS6 ● -62dBm at MCS6 ● -64dBm at MCS7 ● -61dBm at MCS7 ● -59dBm at MCS8 ● -56dBm at MCS8 ● -57dBm at MCS9 ● -54dBm at MCS9 5GHz Band / HT80 ● -76dBm at MCS0 ● -73dBm at MCS1 ● -71dBm at MCS2 ● -68dBm at MCS3 ● -64dBm at MCS4 ● -60dBm at MCS5 ● -59dBm at MCS6 ● -58dBm at MCS7 ● -55dBm at MCS8 ● -51dBm at MCS9 PAGE 8 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 4. 4.1 Electrical and Thermal Characteristics Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 Maximum +80 60 125 Units ℃ ℃ ℃ General Section 5.2.1 5.2.2 5.2.3 5.2.4 4.3 Minimum -40 Feature Detailed Description Antenna Type Operating Voltage Current Consumption Form Factor and Interface ● ● ● ● Integrated antenna 5V±10% ＜900mA High Speed USB2.0 Interface Software Driver Windows XP/ WinCE/ Vista,/ Win7, Linux, MAC Security 64/128-bits WEP, WPA, WPA2 PAGE 9 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU 5 Connector Definition 5-Pin 1.25 mm PAD Pin Definition Power_EN GND D+ D- VDD（+5V） 6 Mechanical Dimensions *TLERANCES *UNIT:mm ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED PAGE 10 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU Appendix 1 : Schematic L16 1nH ANT2 ANT1 L12 1nH C81 NP C9 NP U2 G P2 P1 G G P3 8025-A1 U1 G P2 P1 G G P3 8025-A1 L14 2n7H C82 0p75F C78 4p7F 5GFEM1_P13 NP TRSWB_1 C4 10pF L4 2n7H C14 1p0F TRSWB_1 C74 1p2F L13 2n7H C75 1p2F L5 2n7H C21 1p2F TRN_0 C35 1p2F TRP_0 RF2ON_1 L9 10nH RF2OP_1 IC3 L6 10nH TX5G_0 RF2OP_0 RF2ON_0 L8 1n2H R42 100K 5GFEM1_P5 LX5586 TX5G_1 C66 4p7F L11 10nH TX GND C93 1uF L2 1n2H R1 100K 5GFEM0_P5 LX5586 IC2 L7 10nH NP V33 VDET PA_EN RX5G_1 C39 5p6F C33 5p6F C40 0u1F TX GND PA_EN VDET V33 C98 1uF C57 4p7F C90 NP C50 0p3F C34 4.7pF C8 10pF C18 0p3F RF5OP_1 NP C48 10uF VD12 VD12RF_0 RF5OP_0 NP RF5IP_0 PAPE_5G_0 NP RF5IP_1 PAPE_5G_1 NP C67 4p7F C69 0u1F C64 1p2F TRP_1 L2 2n7H C68 0u1F LNA_EN CRX GND ANT C80 0p75F NetC11_2 13 14 15 16 NetC51_2 L3 2n7H C12 1uF C22 1p2F C13 1uF LNA_EN CRX GND ANT C23 0p75F 13 5GFEM0_P13 C6 4p7F 14 15 16 RX5G_0 C23 NP VD12 C46 0u1F R4 0R C44 V12L 1nF C48 V33 0.1uF 77 C45 V12RF 0u1F R9 0R RF2ON_0 C43 V33 0u1F RF2OP_0 11 RF5OP_0 10 C38 V33 0u1F V33 12 16 15 14 13 RF5IP_0 V12 C17 10uF V12RF 18 17 PAPE_5G_0 TRSW_0 TRSWB_0 19 GND V33_SYS V12_SYS V12_S0 RF2IN_S0 RF2IP_S0 V33_PAD2G_S0 RF2ON_S0 RF2OP_S0 V33_PAD5G_S0 RF5OP_S0 VD33PA5G_S0 RF5IP_S0 RF5IN_S0 V12_BB_S0 V12_AFE_S0 PAPE_2G_S0 PAPE_5G_S0 TRSW_S0 TRSWB_S0 C29 0u1F C15 C13 0u1F 10uF C28 0u1F C25 15pF C55 0u1F NP X1 4 XT ALP XTALP 2 40MHz C54 0u1F R12 0R C63 1uF V12RF NetDX1_5 C84 10pF C10 10pF NetDX0_5 NP C3 10pF TRSWB_0 TRSWB_0 65 RTL8812AU XTALP3 C27 C37 0u1F 0u1F C26 15pF R6 10K R14 0R 5V R10 100K PowerEN GPIO[2] GPIO[3] GND HSDP HSDM VD12S VD33S RREF VDDTX HSON HSOP GND HSIN HSIP VDDRX GND LX_SPS0 LX_SPS0 VDSPS33 0u1F C61 C72 C70 0u1F 10uF R7 100K C42 1uF IC1 57 56 55 54 52 53 51 50 48 49 5V C85 0u1F V12 V33 LX V12 V12 Q1 VIN FB SW EN GND G5728 L10 4u7H C60 1uF C59 1uF R11 24K C52 1uF 47 V33 RREF 45 46 HSDM V12 HSDP 44 43 C51 0u1F 42 40 41 39 C1 10uF L1 4u7H SPS_P3 EN_P1 V12 PowerEN D+ D- FB_P5 C16 R1 0u1F 150K5V C62 1uF C71 10uF 5V D_ D+ V33 R15 100K C88 100pF R16 22K V12L C86 10uF C24 1uF V12 5V DD+ GND NC Pow erEN Q2 EN GND SW V33 VIN FB G9091 V33 C1 10uF V12RF Version 1.1 PAGE 11 OF 13 58 FB_SPS V33 PDn GPIO[1] 38 V12 59 VD33D 37 GPIO[0] / BT_Suspend TRSWB_1 60 VD12D 36 GPIO[11] / PDn TRSW_1 61 LED0 / GPIO[10] 35 LED2 / GPIO[8] 33 GPIO[7] / BT_PRI 32 GPIO[6] / BT_STATE 31 GPIO[5] / BT_RFQ / BT_EN 30 GPIO[4] / WL_ACT 29 TRSWB_S1 PAPE_5G_1 62 V33 28 TRSW_S1 63 PAPE_5G_S1 V33 V33 VD33D 27 VD12D V12 LED1 / GPIO[9] 34 V12 V12_AFE_S1 64 PAPE_2G_S1 V12 VD12 67 RF2IN_S1 66 V12_BB_S1 68 RF2IP_S1 RF2ON_1 69 V33_PAD2G_S1 RF2OP_1 70 RF2ON_S1 26 ANTSWB V33 25 CK_BT 24 RF2OP_S1 71 23 ANTSW RF5OP_1 72 XO XO 22 XI 76 XI V33_PAD5G_S1 V33 73 RF5OP_S1 RF5IP_1 74 VD33PA5G_S1 75 RF5IP_S1 V33 V33 RF5IN_S1 21 VD33A 20 V33 VD12A V12 17 GND 17 GND NC VCC2 V33 V33 5G FEM GND NC V33 10 VCC1 V33 VCC2 11 10 VCC1 5G FEM GND VDD 12 GND RX GND 11 VDD 12 GND RX GND 5GFEM1_P16 NetC51_1 5GFEM0_P16 2G_1 5G_1 NetC69_1 2G_0 5G_0 NetCON1_1 GND NetCON0_2 NetCON0_1 PRODUCTS SPECIFICATION SBRT8812AU Appendix 2 : Statement FCC Important Notes: (1) FCC Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. The devices must be installed and used in strict accordance with the manufacturer’s instructions as described in the user documentation that comes with the product. Modular could be only used in mobile or fix device, and could not be used in any portable device. Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and it’s antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. (2) Co-location Warning: This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. (3) OEM integration instructions: This device is intended only for OEM integrators under the following conditions: The transmitter module may not be co-located with any other transmitter or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). (4) Validity of using the module certification: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. (5) End product labeling: The final end product must be labeled in a visible area with the following: “Contains Transmitter Module FCC ID: LNQSBRT8812AU”. (6) Information that must be placed in the end user manual: The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. PAGE 12 OF 13 Version 1.1 PRODUCTS SPECIFICATION SBRT8812AU FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. IEEE 802.11b or 802.11g operation of this product in the USA is firmware-limited to channels 1 through 11. The device for the band 5150-5250 MHz is only for indoor usage to reduce the potential for harmful interference to co-channel mobile satellite systems. PAGE 13 OF 13 Version 1.1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2015:04:24 17:12:21+08:00 Create Date : 2015:04:24 17:12:21+08:00 Format : application/pdf Title : Microsoft Word - EUT Photos and Test Setup Photos(FCC).doc Creator : Administrator Document ID : uuid:25fffe4c-ba97-4a52-b043-a166b7b57dbf Instance ID : uuid:94b1391d-854d-4681-8ac7-d669beaecda7 Page Count : 13 Author : AdministratorEXIF Metadata provided by EXIF.tools