Actiontec Electronics SBT100U ScreenBeam USB Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1818068
Application ID	dYs5VTtyPzdma2xjCz0rCw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	72.92kB (911462 bits)
Date Submitted	2012-10-18 00:00:00
Date Available	2012-10-18 00:00:00
Creation Date	2017-10-29 18:37:13
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-29 18:37:13
Document Title	Microsoft Word - AWD Test Environment Setup Guide_withFCC 1005.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	altum

AWD Test Environment Setup Guide
Hardware Requirement


TV or monitor with HDMI interface
Laptop:
CPU: intel CPU at least Core 2 duo 1.8g or AMD CPU
Ram: at least 2g
Wireless card: Realtek 8192DU USB dongle
OS: Win7 64 bit
Software package(Files included in the zip file AWD_WIN7_TEST.zip)





Folder “Driver_Installation” – driver of Realtek 8192DU
AWD.msi – AWD installation file (version: 2.0.18)
install.img – firmware image of Rx (version: 0.5.7)
vcredist_x64.exe – Microsoft Visual C++ 2010 Redistributable x64
vcredist_x86.exe – Microsoft Visual C++ 2010 Redistributable x86
Test environment setup procedure

Connect Rx
Upgrade Rx to 0.5.7
1.1 Prepare a USB stick , copy install.img into root and stick into Rx’s USB port
1.2 Connect Rx to a TV or Monitor via HDMI interface
1.3 Hold reset button and then power on, check the Screen to be like this, then release reset
button
1.4
Wait until upgrade process finish(DO NOT POWER OFF WHILE UPGRADING)
1.5
Rx will reboot automatically, wait until Ready to Connect screen. Check version on left‐bottom
corner, should be 0.5.7

Connect AWD
Change Audio Setting
1.1 Right Click the speaker icon in the right‐left corner, then choose Playback devices
1.2
In Playback tab, find Speakers and Headphone, then click Properties
1.3
Switch to Advanced tab, from the dropdown list change the default format to 16
bit,44100Hz(CD Quality)
2
Install Microsoft Visual C++ 2010 Redistributable
2.1 Install Microsoft Visual C++ 2010 Redistributable x86 and x64 version
2.2
After finish, go to programs and features, check if it is installed correctly.
Install Wireless USB dongle driver
3.1 Double click on Setup, then follow the instructions
3.2
During the process, this window may appear several times, choose Install this driver software
anyway
3.3
After reboot, plug‐in the wireless USB dongle, and wait till it is ready to use. To check if it is
installed correctly, go to Device manager, there should be a device Realtek RTL8192DU
Wireless LAN 802.11n USB 2.0 Network Adapter in Network adapters, double click to open
properties, check the Driver tab, the version should be 7015.12.817.2012
Install AWD
4.1 Install AWD, after finished, click on the icon, AWD Main window and Information window will
appear(mark the checkbox in information window, then close it). Check version to be 2.0.18
5
Connect AWD
5.1 PIN method (First time)
5.1.1 Click Add Device button
5.1.2 Pair window will appear, scan and list Rx. Click on Rx name and then click Connect
5.1.3 PIN number will shown on TV and a input window will shown on laptop, input the PIN
number and then click OK
5.1.4 Wait for the connection process
5.1.5 After finish, laptop screen will be displayed on TV
5.2
Persistent method
Same as PIN method except entering PIN. There is no need to enter PIN
Play a video clip repeatedly
Disconnect AWD
7.1 Click on AWD icon, AWD main window will appear. Click Disconnect button. Click OK when
prompted
7.2
AWD and Rx will return to the status, ready for next connection.
FCC Statement:
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one of the
following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
● Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
This device and its antenna(s) must not be co-located or operation in conjunction with any other
antenna or transmitter.
This device is going to be operated in 5.15~5.25GHz frequency range, it is restricted in indoor
environment only.
IMPORTANT NOTE:
Federal Communication Commission (FCC) Radiation Exposure Statement
This EUT is compliance with SAR for general population/uncontrolled exposure limits in
ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and
procedures specified in OET Bulletin 65 Supplement C. This equipment should be installed and
operated with minimum distance 0.5 cm between the radiator & your body.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : altum
Create Date                     : 2012:10:05 09:44:31+08:00
Modify Date                     : 2012:10:05 10:41:57+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : altum
Title                           : Microsoft Word - AWD Test Environment Setup Guide_withFCC 1005.doc
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2012:10:05 10:41:57+08:00
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Document ID                     : uuid:ccbfd02d-3120-46f6-8856-31803aa4d009
Instance ID                     : uuid:4725eb7b-56c1-4151-8944-55ddff4263f8
Page Count                      : 10

EXIF Metadata provided by EXIF.tools